Problem with burning audio CD's in iTunes 10.x.x

Just had a situation where I had to burn three sets of CD's, each with similar (but not exactly the same) audio tracks. I labeled the discs CD_01, CD_02 and CD_03. The files are recorded .mp3 music tracks. I was sure that each playlist I created for each CD in iTunes contained the correct cuts, though after they were burned as music CD's, the Mac Pro computer and iTunes seemed to get confused about which CD # and playlist was loaded. iTunes apparently did not burn the correct playlist that was selected.
I re-burned the discs and when I thought they were finally right, we tested the master discs on our car stereo, and we could see all the track information fine and that the CD disc numbers were correct. However, when we made duplicates of those master files, once again the computer and iTunes again appeared to be confused! The disc master that had been confirmed to be CD_02 was now coming up as CD_01!! And when I loaded the discs into a different computer with iTunes 11, none of the track information that was once visible could be seen! The disc was called "Audio CD" and each track was reduced to just a number. Now my fear is that I have sent out discs with all incorrect versions on them !
Has anyone else had issues similar to these when burning audio CD's?
Thanks!

I also seem to have problems burning with the new iTunes 7. I thought it was neat I could backup my whole collection and that worked fine. But just burning an audio CD seems to be a problem. I've successfully burned one and this was accomplished by deleting one song from the playlist. I'm not trying to burn multiple CD's from a long playlist.
iTunes.
1. Checks media Ok .
2. The message says it's initailizing the disk.
3. The first song starts to burn and it stays there showing NO progress. It never burns.
What I've tried also is lowering the burning speed, unchecking and rechecking boxes in the burning preferences (like including text). I've used different media.
Seems to be a bug.

Similar Messages

Problem with my audio configuration that keeps iTunes from starting.

When I tried to run iTunes on my computer this morning, it said that iTunes was missing files or something like that. But that's not the problem, although that happens often, I know how to fix it. So I went and ran the repair for iTunes, but now when I try to run iTunes, it says, "ITunes cannot rune because it has detected a problem with your audio configuration." This is the first time that's ever happened, and I've reinstalled iTunes a couple times since then. Okay, like seven times, but I keep getting the same error message. I know that I haven't ever changed my audio configuration, but I don't know what to look for, or what to do. I'm pretty much at the end of my technological knowledge, as limited as that is, now, and I don't know how to fix it. It is quite aggrivating, I just imported about 30 CD's just last night, and I need to burn some CD's for my friend. I am attempting, yet again, to download iTunes, if it by some random intervention of God it works, I'll say never mind my ranting.

Click on Start, the go to All Programs, go to Quicktime and uninstall it.
Then go here, download and install quicktime 7.2
www.apple.com/support/downloads/quicktime72forwindows.html
Try to launch itunes.
Let me know how it goes.

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

Trying to get my fcp project to burn to dvd at the highest quality? Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
How are you adding the files to Compressor?
In FCP, what are your footage properties (command-9) and sequence settings (command-0)

TS1362 my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly"

my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly" i have uninstalled it and reinstalled it twice and it stil lcomes up with that message every time I opentheiTunes icon I dont knowwhat to do

Hello Wade,
This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
"iTunes cannot run because it has detected a problem with your audio configuration"
Resolution
QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
Cheers,
Allen

Itunes won't run because of some problem with my audio configuration? help!

it specifically says "itunes cannot run because it has detected a problem with your audio configuration". anybody know how to fix that. all i did was when my itunes was werking perfectly fine i was uploading some videos onto it but wen i did it was freezing so i did it again and it froze again so i deleted itunes and installed it again. thats when the problem happened. i tried installing quicktime again. that didn't work then i organized my music and video files but it still wouldn't work. my speakers work good. id on't know what the problem is. CAN ANYBODY HELP????!!!!

Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
Good luck.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

Itunes cannot run because it detected a problem with your audio config.

I keep coming up with this message. I feel like I have tried everything. Uninstalling---reinstalling---installing earlier versions---even tried apple's help page regarding this error. Nothing seems to work. Anyone have any ideas?

I have exactly the same problem. Everytime I try to open itunes it shows the dialog "itunes has detected a problem with your audio config..." and then when it "opens"
has no background, so it's impossible to do something. I've tried to reinstall itunes and quicktime in different ways like both of them separately and following every instruction in Apple's Web site like article #304424. I've installed prior versions for those programs too and the problem persist, tried to clean up the registry, etc. I don't want to reinstall Windows to solve this issue 'cause it seems to be only way to get rid of this! =( HELP!!!

ITunes Cannot Run It Has Detected a Problem With Your Audio Configuration

Well... I've just come back from christmas with my new green iPod nano (second gen), and I try to use iTunes. It has an "...unknown error (-200)." So I download the new iTunes. NOW it says "iTunes Cannot Because Run It Has Detected a Problem With Your Audio Configuration." I've tryed the support but it doesn't have any WORKING solution. If SOMEONE could PLEASE tell me whats going on, I'd be REALLY greatful.
I've been trying to figure this out for almost 3 days now and I'm hanging by a string here.
HP Pavillion Windows XP Windows Media Edition

It is your QuickTime application, actually. What you want to do is go into your Control Panel, and then Add/Remove Programs. Find QuickTime, click on it, and click on Remove, and then follow through the prompts to uninstall QuickTime.
Then, go here to reinstall it:
http://www.apple.com/quicktime/download/win.html
Make sure you choose the second option that says QuickTime for Windows (NOT the QuickTime with iTunes).
Go through the download and install, and whenever it completes, try to launch iTunes.
CG

ITunes 7.3.1 cannot run as it has detected a problem with your audio..

Hey
I installed iTunes 7.3.1 last night, and when I click to open it, a message comes up saying 'iTunes 7.3.1 cannot run as it has detected a problem with your audio configeration'
Please help
Thanks

Hi,
I got this message on the older version (7.3) of iTunes and then I got an error to do with runtime as highlighted in another thread.
I used windows add/remove to uninstall iTunes and reinstalled the latest version.
You could try re-installing the latest version.
Cheers,
Cofnchtr.

'iTunes could not run because it had detected a problem with your audio...

...configuration.'
I have just updated to the newest iTunes version from the latest version.
I have installed iTunes and when I click 'iTunes' to launch iTunes, it says this 'iTunes could not run because it had detected a problem with your audio configuration.'
I get the option to click 'OK' or 'Help'
When I click 'OK' the window closes and then nothing happens.
When I click 'Help' nothing happens.
Any advice??

It's probably QuickTime 7.3 that is the problem. Uninstall it and install version 7.2 instead. http://www.apple.com/support/downloads/quicktime72forwindows.html

When I go to open Itunes I get a message that says "Itunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly.

When I go to open Itunes, I get a message saying "Itunes has detected a problem with your audio configuration. Audio/Video playback may not work properly. I've tried closing and re-opening Itunes but it still comes up. I've also tried removing quicktime, repairing Itunes and restarting my computer after that. It still says the same thing. I've also tried reinstalling Itunes as well.

Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy

Error message -ITunes has detected a problem with your audio config...HELP

error message - itunes has detected a problem with your audio configuration. audio/video playback may not operate properly...
ive gone through the itunes support steps such as reinstalling quicktime and itunes and nothing seems to work... itunes still open...but then nothing plays...please help me

I've cobbled together a few ideas courtesy of some posts made by the inimitable b noir concerning this particular problem .
First ...
... let's try swapping out your QuickTime, taking a few additional explicit precautions this time.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?
Next ...
If you're still getting the message with a fresh quicktime in place, let's check to see if something is awry with your sound card.
Open your "Sounds and Audio Devices" control panel. Click the "Audio" tab. Is the correct default device showing up in the "Sound Playback" area?

This message recently popped up on my PC - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." What does this mean and how to fix ??

Hi Everyone - recently this message popped up on my PC, when I was trying to import cd's into the iTunes library and then onto my iPod - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." Can anyone tell me what this means and how to fix it ?? I am not fantastically PC savvy, so any information explained fully and all steps to follow to get my music playing again would be great !! Thanks, SC

Hi B, thanks so much for helping me troubleshoot !!
Ok, so when I went in to check the Audio tab of the Sounds and Audio Device Properties, I found the following:-
* Sound Playback Default Device = No Playback Devices.
* Sound Recording Default Device = No Playback Devices.
* MIDI Music Playback Default Device = No MIDI Playback Devices.
All text in this drop-down box were light grey, and therefore unable to be selected or altered.
I also tried playing a cd through Windows Media player, to see if I could get sound a different way. When I put the cd in and clicked on Play, the following message appeared, "Windows Media Player cannot play the file because there is a problem with your sound device. There may not be a sound device installed on your PC, it may be in use by another program, or it may not be functoning properly."
Any ideas ? I had sound previously, but then a work colleague re-built the PC to add more space to the hard drive, and since then, no sound. I know this may now not just be an iTunes issue, but I would appreciate any assistance you can offer.
Thanks again,
Shell

Itunes has detected a problem with your audio configuration Audio/Video playback may not operate properly

I cant copy the music from itune library to iphone. Message "itunes has detected a problem with your audio configuration Audio/Video playback may not operate properly" I unistalled the itune from the pc and download the itune again but still same message come up.

I'm having the same problem. I have downloaded Itunes again but still the same problem.

Problem with burning audio CD's in iTunes 10.x.x

Similar Messages

Maybe you are looking for