Problem with Business Content install in ECC5 IDES

Hi,
I am having tough time installing business content.
After installing ECC5 IDES, I am trying to install Business Content in BW ( Client 800).
In SBIW, (under Business Content DataSources), I did Transfer Application Component Hierarchy.
Then I transfered few DataSiurces ( 0MATERIAL_ATTR)
Then in BW, I did "Replicate Data Sources". I see all the Datasources in "Data Source Overview"
But When I try to install Business Conetent ( rsa1>> Business Content >> Select Object Types >> InfoObjects>> Select Objects>> Double click ), I couldn't find any InfoObjects from source system. I tried the same for InfoCubes as well..
Am I missing anything?? I appreciate your help.
Thanks
Samba

ECC will have content for 'source system' ie datasource and extractors. On your BW system you need to have the business content add on available before you can see such objects there (infoobjects, cubes).
BW system (whether in the same IDES or another system) needs to have this BW Content add-on. It is one additional step, just having the BW system (without this addon) will not give you what you are looking for.
BW content add-on is typically one set of transport files, installed using SAINT transaction. My guess is your system doesn't have it.

Similar Messages

Boot problems with second Arch install on an IDE drive

I have two SATA II drives and two IDE drives (one HDD and one optical) in my box. I had Arch installed on first SATA II drive (/dev/sda). I changed the mkinitcpio files to load sata modules before pata, and that works okay. So, my IDE HDD is now /dev/sdc
However, I installed a second Arch onto the /dev/sdc (IDE) and it won't boot. It goes through booting process and hangs at checking the drives claiming that the /dev/sda3 has bad superblock. Now, this is really odd, because /dev/sda3 is a SWAP partition, and the init script is trying to run e2fsck on it.
How do I fix this? Should I simply (somehow) disable the filesystem check?
(Before you ask, I need the second Arch to build a LiveCD.)

It's correctly identified as Linux Swap partition. Besides, the first Arch install is still working with that swap partition reporting no problems at boot time.
Here's the output of fdisk -l:
Disk /dev/sda: 160.0 GB, 160040803840 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x4a424a41
Device Boot Start End Blocks Id System
/dev/sda1 * 1 3824 30716248+ 7 HPFS/NTFS
/dev/sda2 3825 7654 30764475 83 Linux
/dev/sda3 7655 7903 2000092+ 82 Linux swap / Solaris
/dev/sda4 7904 13982 48829567+ 5 Extended
/dev/sda5 7904 13982 48829536 83 Linux
Disk /dev/sdb: 400.0 GB, 400088457216 bytes
255 heads, 63 sectors/track, 48641 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x4fa7b7a5
Device Boot Start End Blocks Id System
/dev/sdb1 1 48641 390708801 42 SFS
Disk /dev/sdc: 81.9 GB, 81964302336 bytes
255 heads, 63 sectors/track, 9964 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xec0c2373
Device Boot Start End Blocks Id System
/dev/sdc1 * 1 5 40162 83 Linux
/dev/sdc2 6 136 1052257+ 82 Linux swap / Solaris
/dev/sdc3 137 1666 12289725 83 Linux
/dev/sdc4 1667 9964 66653685 83 Linux
And just in case, the menu.lst used to boot both Arches:
# (0) Arch Linux
title Arch Linux
root (hd0,1)
kernel /boot/vmlinuz26 root=/dev/sda2 ro vga=791
initrd /boot/kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,1)
kernel /boot/vmlinuz26 root=/dev/sda2 ro
initrd /boot/kernel26-fallback.img
# (1) Windows
title Windows XP
rootnoverify (hd0,0)
makeactive
chainloader +1
# (2) Arch Linux
title ArchGem
root (hd1,0)
kernel /vmlinuz26 root=/dev/sdc3 ro vga=791
initrd /kernel26.img
# (3) Arch Linux
title ArchGem Fallback
root (hd1,0)
kernel /vmlinuz26 root=/dev/sdc3 ro

Error message in .docx : 'Open XML file cannot be opened because there are problems with the contents. Details Unspecific error Location: 2'

I have put a lot of work into a docx document on my Mac, but now can't open it as it gives the error message: 'the Open XML file cannot be opened because there are problems with the contents. Details, Unspecific
error, Location: 2'
When opening the original file the message said: 'this file contains word 2007 for Windows equations' etc. but I managed to track changes fine, and saved, closed and re-opened it numerous times without problem. Some graphs seemed moved, and various formulas
were illegible, but no other weirdness was observed.
I have microsoft 2008 installed on my Mac OS X version 10.6.8.
I've tried to fix it using various solutions suggested here, but am afraid am too IT illiterate to have had any luck, please help I'm new to all this!
I've uploaded it to https://www.dropbox.com/s/hkw9k6lyihzoxpc/SittwayPauktawSQUEACREPORT_KD%2BCH.docx

Hi,
This issue is related strictly to oMath tags and occurs when a graphical object or text box is anchored to the same paragraph that contains the equation.
Please use the "Fix it" tool in the following KB article to resolve the problem. See:
http://support.microsoft.com/kb/2528942
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

The file .docx cannot be opened because there are problems with the contents in sharepoint document library

I created a site and created a document libarary and assigned a word document as a content type . I have written a workflow to create a new document . The workflow is working fine and all the document is getting created and values are getting stored
in it .
As per my requirement I am saving the above site as site template .
After that I am creating a new site based on the above site template , Its getting created and I started the workflow , its working fine and the document is also getting created .
The problem is I am getting error while opening the word document
Error - The file filename.docx cannot be opened because there are problems with the contents .
Details - No error details availble .
Indresh

What are you doing within the txt document? Is it general text and string based items, or have you something more elaborate going on?
An older discussion here elaborates a bit more on the dotx vs docx side of things.
http://social.msdn.microsoft.com/Forums/en-US/de1b5ff9-ea6d-460c-a707-8c28acd4906f/error-opening-office-open-xml-file-when-using-sd-workflow-to-create-item-in-document-library?forum=sharepointcustomizationlegacy
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

URGENT : EP 7.0 /ECC 5.0 - Problem with Business Package : ESS/MSS

Dear Portal Gurus,
We are facing a problem with business package for ESS/MSS
Our system Info is as under :
Portal:- NW 2004s
ERP2004: - (R3 ECC 5.0)
ESS:- BP for Employee Self-Service (mySAP ERP 2004) 60.2
MSS:- BP for Manager Self-Service (mySAP ERP 2004) 60.1.1
SAP XSS à (SAP ESS 100, SAP MSS 100 and SAP PCUI_GP 100 , all upto SP 12)
After the Business Packages were installed,found that some ess apps where not deployed...so manually deployed it.
The JCO connections are OK.
Do we need to set up the backend Homepage Framework for the same......even for preview.....was thinking not.
Also, here is the error and exception that we get when we preview any ESS iview.
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
You dont have the authorization to start service sap.com/pcui_gp~xssutils/XssMenuArea.
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: You dont have the authorization to start service sap.com/pcui_gp~xssutils/XssMenuArea.
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.initBackend(BackendConnections.java:234)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModel(BackendConnections.java:159)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.connectModel(InternalBackendConnections.java:183)
Thanks.
Message was edited by: Ashutosh Rana

I got the same problem :/
not the authorization, but the fields in working time is displaying wrong.. (too big)
Any solution to this?
Best Regards
Kristoffer Engh

BW 3.5 SP13 with Business Content 3.53 SP4

Hi experts!
I have a BW system with the following configuration: BW 3.5 SP13 with Business Content 3.53 SP4.
To install the xApp Analytics 1.1, I need at least the following configuration: BW 3.5 SP14 Business Content 3.5.3 SP6
Which features I will lose if i decide to install xApp Analytics 1.1 in the BW I have? Am I going to lose queries, cubes and etc that come bundled within the xApp Analytics 1.1 Business Packages?
Thanks a lot.

Thanks Stratos...
for reference...
SAP GUI
    u2022   SAP 640 GUI, patch level 25
    u2022   SAP 710 GUI patch level 6
    u2022   SAP Java Connector 2.1.8
SAP Servers
   u2022    SAP BW 3.5, BASIS level 20, ABA level 20, BW level 20
   u2022    SAP R/3 4.6c, BASIS level 41, ABA level 41
   u2022    SAP R/3 4.7, BASIS level 41, ABA level 41
   u2022    SAP NetWeaver BI 7.0, BASIS level 14, ABA level 14, BW level 14
   u2022    SAP NetWeaver BI 7.02, BASIS level 0, ABA level 0, BW level 0
   u2022    mySAP ERP 2004, BASIS level 19, ABA level 19, BW 3.5 level 19
   u2022    mySAP ERP 2005, BASIS level 14, ABA level 14, BI7 level 14
   u2022    SAP Enterprise Portal 6 SP19
   u2022    SAP Enterprise Portal 7 SP10
SAP servers required to have at least the above patch levels.
Note: The following correction notes should be applied to your SAP BW / SAP Netweaver BI system: 1125433, 1161911, 1162349, 1162416, 1170323, 1230303 and 1007048.
OSS Correction Note 1007048 requires a manual configuration step.
Thanks
Sathya

"The file .docx cannot - problems with the contents."

Word 2007 file HELP!
I started a paper this morning and saved it as normal, however when I try to reopen it I get the following messege: The file .docx cannot be opened because there are problems with the contents. Does anyone know how to resolve this issue?

Hi,
Please check if this applies:
http://support.microsoft.com/kb/2528942
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

PHDS - problem with the content license

Hi, I have just enabled the basic phds settings in my httpd.conf (ie not the PHDSCommonKeyFile / PHDSPlaybackExpiration / PHDSOutputProtection / PHDSVideoEncryptionLevel) settings:
<IfModule jithttp_module>
<Location /hds-vod>
    HttpStreamingJITPEnabled true
    JitFmsDirPath ".."
    HttpStreamingContentPath "/full/location/to/content"
    HttpStreamingJITConfAllowed false
    EncryptionScope server
    ProtectionScheme phds
    Options -Indexes FollowSymLinks
</Location>
</IfModule>
And whilst when hitting the video_bitrate.mp4.f4m file i get the expected xml back with the drmAdditionalHeader element, when I view it in the adobe multibitrate hds player i get the error "There was a problem with the content license., plesae contact your video service provider" - has anyone seen this before?
Thanks

Hi, the "adobe multibitrate hds player" is the one you see on the http://server:8134 home page.
I installed 4.5.3 from scratch and left all the defaults with the exception of EncryptionScope server & ProtectionScheme phds - the http error log showed the below when visiting http://server:8134 - [Mon Oct 01 08:34:18 2012] [debug] mod_headers.c(756): headers: ap_headers_output_filter()
The player does say in the bottom right "This video content is DRM protected" and the crossdomain.xml exists and looks like:
<cross-domain-policy>
<allow-access-from domain="*"/><site-control permitted-cross-domain-policies="master-only"/>
</cross-domain-policy>

TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly.

'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?

Try Troubleshooting issues with iTunes for Windows updates.
tt2

I am having a problem with Windows Fusion installed on a MacBook.

I am having a problem with Windows Fusion installed on a MacBook OS 10. When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
Any help would be greatly appreciated.
Thank you very much.

HartEJ wrote:
...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them.

Document Creation error - "We're sorry. We can't open document name because we found a problem with its contents"

Morning Friends,
I have created a SharePoint 2010 "Site Workflow" that is designed to take information from a form and create a Word doc with the gathered information and store this Word doc in a document library.
I am using Sharepoint 2013 with Office 2013
I understand there are a lot of steps (19) outlined below and I can provide more information as needed but the bottom line is this, workflow successfully takes info from an initiation form, uses the info to create a Word doc. Places this Word doc in a library.
When attempting to open / edit doc, receive error
"We're sorry. We can't open <document name> because we found a problem with its contents"
Details - No error detail available.
Any info or advice would be greatly appreciated.
Very high level view of what I have done:
1 - Created content type called "Letters"
2 - Added site columns " First Name" and "Last Name"
3 - Created and saved to my desktop a very basic Word document (Letter.docx) that says "Hello, my name is XXXX XXXX"
4 - In the advanced settings of the "Letters" content type I uploaded this "Letter.docx" file as the new document template.
5 - Created a new document library called "Letters"
6 - In Library Settings - Advanced Settings, clicked "Yes" to enable the management of content types.
7 - Then I clicked "Add from existing content types" and added the "Letters" content type
8 - Back in the advanced settings of the "Letters" content type I selected "Edit Template" and replaced the first XXXX with the Quick Part "First Name" and the second XXXX with the Quick part "Last Name"
9 - Created a new 2010 Site workflow called "Create a Letter"
10 - To the workflow I added the action "Create List Item"
11 - Configured the action to create Content Type ID "Letters" in the document library "Letter"
12 - For the "Path and Name" I gave it a basic name of "Letter to"
13 - The next step was to create the Initiation Form Parameters and added to form entries "First Name" and "Last Name"
14 - I then linked the initiation form fields to the data source "Workflow Variables and Parameters" to their respective Field from Source parameters
15 - Went back to the "Path and Name" and modified the basic name of "Letter to" to include the first and last name parameters.
16 - Saved - published and ran the work flow.
17 - As expected, Initiation Form prompts for First and Last Name. ("John Doe") Then click "start
18 - Go to document library "Letters" and see a new Word document created titles "Letter to John Doe"
19 - Go to open / edit the Word document and receive the following error
thoughts? Any info or advice would be greatly appreciated.

See this MS support article for SP2010 workflows and generating Word docs:
https://support.microsoft.com/kb/2889634/en-us?wa=wsignin1.0
"This behavior is by design. The Create
List Item action in the SharePoint
2010 Workflow platform can't convert Word content type file templates to the correct .docx format."
I've had success in using SP 2013, Word 2013 (saving a .docx as the template instead of .dotx for the document library content type), and an SP 2010 workflow using SP Designer 2013.

Problem with File Content Conversion

Hi All
I am facing a problem with file content conversion.
This is my sample file structure:
Header_Record (Occurance - 1)
Field1 in Header
Field2 in Header
Item(Occ-1 to n)
Field3 in Item
Field4 in Item
<<ItemType>> (Structure in Item) (Occ - 0 to n)
<<Field5>> in ItemType
<<Field6>> in ItemType
<<ItemTypeCategory>> (Structure in ItemType)(Occ - 0 to n)
<<<<Field7>>>> in ItemTypeCategory
<<<<Field8>>>> in ItemTypeCategory
Footer_Record (Occurance-1)
Field9
Field10
There is a key field 'Type' in all the above records with unique value in each record.
Now, I defined Field content conversion as follows:
Recordset Structure: Header_Record,1,Item, * , ItemType, * ,ItemTypeCategory, * ,Footer_Record,1
Recordset Sequence: Ascending
KeyField Name: Type
Following are parameters defiled:
Header_Record.Keyfieldvalue: 00
Header_Record.fieldseperator: ,
Header_Record.fieldnames: Field1,Field2
Header_Record.endseperator: 'nl'
Item.keyfieldvalue: 05
item.fieldseperator: ,
item.fieldfieldnames: field3,field4
item.endseperator: 'nl'
ItemType.keyfieldvalue: 10
itemType.fieldseperator: ,
itemType.fieldfieldnames: field5,field6
itemType.endseperator: 'nl'
ItemTypecategory.keyfieldvalue: 15
itemTypecategory.fieldseperator: ,
itemTypecategory.fieldfieldnames: field7,field8
itemTypecategory.endseperator: 'nl'
Footer.keyfieldvalue: 20
Footer.fieldseperator: ,
Footer.fieldfieldnames: field5,field6
Footer.endseperator: 'nl'
Now, i pass the following file:
00,111
05,222
10,333
15,444
20,555
What i expect out of my FCC is this (Sample output to show the hierarchy of field values):
00,111
05,222
<<10,333>>
<<<<15,444>>>>
20,555
But, I am getting this output (Hierarchy is missing. All the structures are in the same order without hierarchy):
00,111
05,222
10,333
15,444
20,555
Field values are being identified according to field content conversion, but, the hierarchy of the fields is missing.
Can you please tell me how should i change my FCC config?
Sorry for this long question.
Many Thanks
Chandra
Edited by: Chandra Sekhar H on Jan 30, 2009 7:10 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:16 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:17 PM

You will always get a flat structure from FCC. If you want hierarchichal strucuture, you have to create a target and map. You will get only like -
Root
--Recordset
Group1
Fields
Grop2
Fields
Group3
Fields
VJ

Problem with file content conversion in receiver file adapter

Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
Chandra

Posted in Incorrect forum.
Posted again in Process Integration forum

Problems with html content in box

Hi! I have a problem with html content. For example photoswipe. If I import the folder with the index.html of photoswipe as an article all works fine. If I link it trough the folio overlay creator/webcontent) into a box in indesign dps, it stays empty. Seems like it doesnt find the images/paths??
Klaus

This sounds familiar. PhotoSwipe doesn't seem to like working in a web content overlay unless the JavaScript and other source files are uploaded within HTMLResources. This means editing your local HTML file so that paths to the JavaScript, images and CSS files begin by pointing to HTMLResources virtual folder (../../../HTMLResources/) before their subfolder and filenames. It's worth a try.

Business Content instalation & Transportation steps

Hi,
iam a new in Sap bi implementation project.so iam gettiong somany doubts abot Business Content instalation & Transportation
can you help me above concepts step by step,
Thanks,
chal

Please search the forum before posting a thread
Please do not post duplicate threads
Business Content instalation & Transportation steps

Problem with Business Content install in ECC5 IDES

Similar Messages

Maybe you are looking for