Problem with Business Process tutorial

I'm trying to run the Business Process Tutorial (http://e-docs.bea.com/workshop/docs81/doc/en/integration/tutorial/tutWLIProcessCreateApp.html?skipReload=true#1025634)
in WebLogic Workshop 8.1 (Build 2003.0710.190003) and I'm having trouble with
the part that says:
In the New Application dialog box, select Tutorial in the left pane, and select
Tutorial: Process Application in the right pane.
In my setup, the New Application window has only "All" in the left pane. And it
doesn't have anything "Tutorial" related in the right pane.
Any suggestions?
Thanks
-TAB

"Todd Bradfute" <[email protected]> wrote:
>
I'm trying to run the Business Process Tutorial (http://e-docs.bea.com/workshop/docs81/doc/en/integration/tutorial/tutWLIProcessCreateApp.html?skipReload=true#1025634)
in WebLogic Workshop 8.1 (Build 2003.0710.190003) and I'm having trouble
with
the part that says:
In the New Application dialog box, select Tutorial in the left pane,
and select
Tutorial: Process Application in the right pane.
In my setup, the New Application window has only "All" in the left pane.
And it
doesn't have anything "Tutorial" related in the right pane.
Any suggestions?
Thanks
-TAB
Hi TAB--
When you installed the platform, did you install the whole thing, or just part
of it? If you chose not to install the examples, or if you chose not to install
Integration, that would explain this behavior. If not, we'll try to go from there...
Thanks,
Mike

Similar Messages

Problem with Business Process Publisher and AIA

After installing AIA 11.1.1.5, I installed the Business Process Publisher following the instructions in the AIA Installation Guide at http://download.oracle.com/docs/cd/E21764_01/aia.htm, sec. 8.3: "Manually uploading reference process models to business process publisher".
Since I could not find the Publisher installation files in the AIAFP install I downloaded from OTN, I used the Publisher installation files from the BPA OTN download (files Oracle_BPA_Suite_11.1.1.4_OTN_1of2.zip and Oracle_BPA_Suite_11.1.1.4_OTN_2of2.zip - I did not install BPA before installing Publisher).
Now when I launch Publisher the login page says "Currently, no exports are available. You can only log in to the administration area at this time". If I login, the new page does not show any AIA contents, only the message "There are currently no profiles available". (I am not sure which “exports” and “profiles” it is talking about).
Evidently something is missing, but I cannot figure out what.
Thank you,
Ugo

"Todd Bradfute" <[email protected]> wrote:
>
I'm trying to run the Business Process Tutorial (http://e-docs.bea.com/workshop/docs81/doc/en/integration/tutorial/tutWLIProcessCreateApp.html?skipReload=true#1025634)
in WebLogic Workshop 8.1 (Build 2003.0710.190003) and I'm having trouble
with
the part that says:
In the New Application dialog box, select Tutorial in the left pane,
and select
Tutorial: Process Application in the right pane.
In my setup, the New Application window has only "All" in the left pane.
And it
doesn't have anything "Tutorial" related in the right pane.
Any suggestions?
Thanks
-TAB
Hi TAB--
When you installed the platform, did you install the whole thing, or just part
of it? If you chose not to install the examples, or if you chose not to install
Integration, that would explain this behavior. If not, we'll try to go from there...
Thanks,
Mike

Problem with business process modelling

Hi guys,
Im facing a new problem, while trying to build a new business process in Solution_Manager im getting the runtime raise_exception each time im activating the business process details button.
What are the reasons? And how do i handle it?
P.S. Is there any good documentation on configuration of business process?

I'm agree with Dimitri,
Is there any good documentation on configuration of business process?

URGENT : EP 7.0 /ECC 5.0 - Problem with Business Package : ESS/MSS

Dear Portal Gurus,
We are facing a problem with business package for ESS/MSS
Our system Info is as under :
Portal:- NW 2004s
ERP2004: - (R3 ECC 5.0)
ESS:- BP for Employee Self-Service (mySAP ERP 2004) 60.2
MSS:- BP for Manager Self-Service (mySAP ERP 2004) 60.1.1
SAP XSS à (SAP ESS 100, SAP MSS 100 and SAP PCUI_GP 100 , all upto SP 12)
After the Business Packages were installed,found that some ess apps where not deployed...so manually deployed it.
The JCO connections are OK.
Do we need to set up the backend Homepage Framework for the same......even for preview.....was thinking not.
Also, here is the error and exception that we get when we preview any ESS iview.
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
You dont have the authorization to start service sap.com/pcui_gp~xssutils/XssMenuArea.
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: You dont have the authorization to start service sap.com/pcui_gp~xssutils/XssMenuArea.
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.initBackend(BackendConnections.java:234)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModel(BackendConnections.java:159)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.connectModel(InternalBackendConnections.java:183)
Thanks.
Message was edited by: Ashutosh Rana

I got the same problem :/
not the authorization, but the fields in working time is displaying wrong.. (too big)
Any solution to this?
Best Regards
Kristoffer Engh

Weblogic Integration Business Process Tutorial (10.2)

Hi I'm going through the weblogic integration business process tutorial and when I get to Step 5, "Run the business process" I get a bunch of errors, including the ones below:
s4s-elt-invalid-content.1: The content of '#AnonType_Acknowledgment' is invalid. Element 'attribute' is invalid, misplaced, or occurs too often.
s4s-elt-invalid-content.1: The content of '#AnonType_AckRequested' is invalid. Element 'attribute' is invalid, misplaced, or occurs too often.
s4s-elt-invalid-content.1: The content of '#AnonType_Description' is invalid. Element 'attribute' is invalid, misplaced, or occurs too often.
src-resolve: Cannot resolve the name 'eb:MessageHeader' to a(n) 'element declaration' component.
src-resolve: Cannot resolve the name 'soap:mustUnderstand' to a(n) 'attribute declaration' component.
Has any one run into this problem while going through this tutorial and if so, have you found a solution for this?
Thanks.

The following page is right from the WLI documentation. Are none of these samples useful to you?
[http://edocs.bea.com/wli/docs102/sol_samples/index.html]

Problem with css processing in Firefox8 on Win7.

Hi guys. I have a problem with css processing in Firefox8 on Win7. I need to make div which width and left css properties should be dynamically changed. Inside this div i have an swf object. When i change width and left css styles for my div, it jumps on the page, but other browsers render that well. What can you suggest to fix this problem? Thanks

A good place to ask advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
The helpers at that forum are more knowledgeable about web development issues.<br />
You need to register at the mozillaZine forum site in order to post at that forum.<br />
See http://forums.mozillazine.org/viewforum.php?f=25

Problem with XSQLRequest.process

Problem with XSQLRequest.process:
I'm trying to run XSQL files using XSQLRequest.process. I'm working on the chapter 3 examples in Muench's book and got FAQXML.xsql running okay but have had problems with: FAQhtml.xsql BTW I am calling them from a different directory and am using 9iAS under win2K SP3.:
I've fixed errors such as:
End tag does not match start tag 'img'.
by adding </img>
and:
End tag does not match start tag 'META'.
by removing the <head> section from the xsl.
But now i've got:
XML parse error at line 2, char 1
Expected 'EOF'.
and don't have a clue.
Some questions I have are:
--Why don't I get these errors when I run the same files from Internet Explorer?
--Where is the intermediate XML file?
--How will I get HTML output?
I'd appreciate any help you could suggest.
Peter.
Here is the .xsql and some of the .xsl:
<?xml version="1.0"?>

<?xml-stylesheet type="text/xsl" href="http://localhost/ch03/FAQ-In-HTML.xsl"?>
<xsql:include-xsql href="FAQ.xsql" xmlns:xsql="urn:oracle-xsql"/>

<html xsl:version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
-->
<body>
<center>
<table border="0">
<tr>
<th>Question</th>
<th>Difficulty</th>
</tr>
<xsl:for-each select="ROWSET/ROW">
<tr>
<td>
<table border="0" cellspacing="0">
etc...

XSQL version is 1.0.2.0.
Well, in answer to your import question, yes. Xerces can import Xerces documents properly. Thus if we use Xerces importNode on a document parsed/created using Xerces' DOM implementation, the attribute values stay.
We are using Xerces because it is the foundation of our infrastructure layer (which is partly because it's used in Catalina).
Question. Is it possible that XSQLParserHelper which, as you say, uses an instance of oracle.xml.parser.v2.DOMParser to parse the document, is having trouble with different versions of DOM? I ask because we've noticed that to use Catalina and have its class loader to function successfully, we had strip all the DOM classes from xmlparserv2.jar
importNode snippit ...
public void service(CioServletRequest req, CioServletResponse resp) throws ServletException {
DomResponse respm = resp.createDomResponse();
Document dbdoc = respm.getDocument();
XSQLRequest req = new XSQLRequest( pageUrl );
ByteArrayOutputStream ostream = new ByteArrayOutputStream();
req.process(params, ostream, new PrintWriter(System.err));
String s = new String(ostream.toByteArray());
Document retDoc = respm.parseDocument(s);
dbdoc.appendChild(dbdoc.importNode(retDoc.getDocumentElement(), true));
Hope this helps.
Steve.
null

Problem with a process chain transport

Hi all,
I have a problem with a process chain transport, I transport it but when I see the changes in testing environment I dont see it, I did it four times but nothing happen and I dont have errors.
Can anybody tell me how to transport a process chain.
Thanks.

Hi Federico,
When you tranport Process Chains, initially chains will be available under "Not Asigned" node in RSPC Transaction. The transported chains wont be get highlighted automatically. Manually need to open the chain in update mode and activate it on Quality.
Hope it will help you to resolve the problem.
Regards,
Raji

Integration with business processes (workflow)?

Hi all,
how OBIEE integrates with business process?
kapil

Hi,
Integration can be done both ways:
- You can call an iBot from any business proces via webservices.
- You can call a business process (i.e. BPEL proces) from an iBot through a custom java script.
Regards

Problem with AND process in daily running process chain

Dear Friends,
I am currently I am facing problem with AND process. In my daily running process chain, daily the process chain is failing at AND process. Currently I am workaround and manually repairing the AND process and loading the data with below (link) steps.
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
I need permanent solution for this reoccurring problem. Kindly share your thoughts and ideas to resolve this problem.

Hi,
The below are the job log. After this the batch job is failing.
Job log overview for job: BI_PROCESS_AND
Job started
Step 001 started (program RSPROCESS, variant &0000000190315, user ID MAESTRO)
This AND process is not waiting for event RSPROCESS, parameter 475P4YTXTIIOA6IQ9GAZVEP24
Job cancelled after system exception ERROR_MESSAGE

Problem with business rule

Hi all,
I have a problem with a business rule (BR) deployed as a standalone Descision service.
the BR consists on a simple decision table wich compare an input (bigInteger) with 50. It returns two facts (as output).
the two conditions are confugured (i.e. <50 and >=50).
the Decision service (stateless) is called in a simple BPEL process. in some cases the the assign activity in the bpel process rise this exception :
<bpelFault><faultType>0</faultType><selectionFailure xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"><part name="summary"><summary>empty variable/expression result. The XPath variable or expression /ns5:callFunctionStatelessDecision/ns5:resultList/ns6:processResponse/ns6:CodeRetour is empty at line 440. An attempt to read or copy data referenced or computed by the XPath expression either had invalid data, according to the XML schema, or did not contain certain optional data. Ensure that the variable or expression result named in the error message is not empty. Enable XML schema validation of related variables to ensure the run-time data is valid. </summary></part></selectionFailure></bpelFault>
it seems like an output of the business rule used by the assign after the invoke activity is empty.
But in the input payload for the decision service all elements are not empty. I can't inderstand how the OBR return an empty variable?
Any help please?

In the taskflow you should be capable to trace step by step what happens in the execution. Does this give any clue, e.g. why sometimes the assert does not work?
cu
Andreas

Problem with Business object attributes in UWL Workitem description

Hi All,
I have developed a workflow which sends the workitem for two level approvals. Once the workflow is triggered workitem sent to the respective user for approval. When user opens the workitem in inbox he can see all the data which comes from the 'Z' Business object in R/3 and he can approve the same. Everything works fine when this process happens in R/3 system.
The problem comes when user opens this workitem in UWL or this workitem is sent to user mail ID executing 'SWN_SELSEN' report, all the attributes of the business object are displayed in the workitem description except 2 . These are the Minimum annual salary(GRMIN) and Maximum annual salary(GRMAX) fields from 'T510N' table.
Regards,
Vaishali.
Edited by: vaishali rautray on Dec 24, 2008 7:52 AM

Hi Saumya,
Thanks for the quick reply.
For storing the Minimum and maximum annual salary values I have created two attributes in the business object which are referring to database fields. T510N is a customizing table. I could see the values for the same, if I test the Business Object or Trigger the w/f in R/3 and check the approval work item in R/3. These values disappears only in case of web interfacing i.e. If I send the same work item to outlook mail or check it in UWL.
I had checked the same and thought if there is any problem with BO or some other processing takes place before these values are retrieved. But I wonder why this happens only if I process the work item outside R/3 system?
Regards,
Vaishali.

Problem with Business Rules in OBPM 10.3.1 Enterprise for WebLogic

We're having a problem with our Business Rules. We've updated two of our business rules (that are used by business rule transitions) in Studio; however, when we publish the updated process, the business rules are not updated. We cannot find anywhere in the Process Admin where to administer the rules to make sure they're overwritten.
I've double checked, and the updated rule code is in the .project.xpdl, but for whatever reason, the rules are not being updated during the deployment. I'm sure that we've done this many times in the past, but for some reason, now it is not working.
We're tried variations of the different versioning when we publish, and we've also tried to unpublish all of the older versions of our process, but it does not change the business rules. We can try to unpublish and undeploy, but it seems like we would lose all old instances of that process that are still running if we did that.
Has anyone ever had this issue, or know if there is a way to effect the business rules via the process admin?

I see what you're saying, but here's why it works the way you're observing it.
Once deployed, the 10g business rules are edited by a business user (the owner of the rule). Changes in Studio that a developer makes to a business rule don't override the changes that the business user made.
To let the business owner edit the rule, add a Global Interactive activity and change its property setting to edit the business rule. Put this activity in the role for the business owner (the person you want to edit the rule).
Dan

Problem with Dialouge process

Hi Experts
We have a peculiar problem, i am not able to analyze the cause.
The scenario is that our system is getting into dumb state and when we checked with our basis guys they have said that all the dialogue work process are busy so its going into dumb state...we are just runing five queries and if it is only this for five queries then i am just horrified with situation when i imagine around 80 users runing the reports and to restore the situation we have to restart our server.
and we are runing the reports on portal only can somebody throw some light on this please.
thanks and regards
Sreedhar

Hi,
tell your basis guy to extend the number of dialog processes in your BW instance
Goto RZ10 and display the basic maintenance of the reporting application server profile; you'll see there the current values.
As an example, we have more than 500 users reporting exclusively via Web frontend and for the moment our reporting application server is runing smoothly with 24 dialog processes; Since our average navigational step is around 10 seconds, if 24 users are concurrent, they would wait in average 10 seconds for a dialog process to be free; queries on multicubes with paralel processing are as well extensively used therefore a navigational step on these queries can eat 10 DIAGS simulatenously during a couple of seconds...
We never had any issue of this kind.
When you say that the system is dumping, could you please be more precise? I don't think this is due to the number of processes; I rather think that the dump is a TIME_OUT issue... Check the parameter rdisp/max_wprun_time in RZ11 and tune it accordingly... We have 3'600 seconds there...
hope this helps...
Olivier.

Problem with a process Flow (RPE-02062 )

Execution of a workflow ended with an error. When I try to execute again I get an error.
But when I try to deploy , also I get another error
RPE-02062: No se puede borrar el tipo de elemento F3 ya que tiene procesos en ejecución. Debe abortar primero todos los procesos en ejecución mediante el Monitor de Oracle Workflow.
Then I review list of request of execution
====================
EXECUTIONS
====================
Audit ID.. Status........ Name.............. Date.............. Owner.........
105844 BUSY EVONCE:STAG2DIMEN 28-DIC-10 11:33:37 OWF_MGR
and I abort this execution .
@ abort_exec_request.sql 105844 WSBICI_ADM.WS_DBICI
But I'd same problem with the deploy.
After I review workflow process not ended with this sentence:
select * from OWF_MGR.wf_items where end_date is null;
ITEM_TYP ITEM_KEY ROOT_ACTIVITY BEGIN_DATE
F3 WB_IK_20101228_113338_105844_EVONCE:STAG2DIMEN STAG2DIMEN 28122010-11:33:38
UP_PPAL WB_IK_20101228_113003_104965_EVONCE EVONCE 28122010-11:30:04
and I tried to abort this process,
09:21:07 OPS$IBERORA:DDW> exec owf_mgr.wf_engine.AbortProcess(itemtype =>'F3', itemkey =>'WB_IK_20101228_113338_105844_EVONCE:STAG2DIMEN');
BEGIN owf_mgr.wf_engine.AbortProcess(itemtype =>'F3', itemkey =>'WB_IK_20101228_113338_105844_EVONCE:STAG2DIMEN'); END;
ERROR en línea 1:
ORA-06502: PL/SQL: error : error de conversión de hexadecimal a raw numérico o de valor
ORA-06512: en "OWF_MGR.WF_ENGINE", línea 4298
ORA-06512: en línea 1
select item_type,item_key,activity_status
from owf_mgr.wf_item_activity_statuses where activity_status!='COMPLETE';
ITEM_TYP ITEM_KEY ACTIVITY
F3 WB_IK_20101228_113338_105844_EVONCE:STAG2DIMEN SUSPEND
F3 WB_IK_20101228_113338_105844_EVONCE:STAG2DIMEN ERROR
UP_PPAL WB_IK_20101228_113003_104965_EVONCE SUSPEND
UP_PPAL WB_IK_20101228_113003_104965_EVONCE NOTIFIED
Thanks in advanced
Marisol

Hi Federico,
When you tranport Process Chains, initially chains will be available under "Not Asigned" node in RSPC Transaction. The transported chains wont be get highlighted automatically. Manually need to open the chain in update mode and activate it on Quality.
Hope it will help you to resolve the problem.
Regards,
Raji

Problem with Business Process tutorial

Similar Messages

Maybe you are looking for