Problem with cache and applications

Hello,
I'm facing a problem with webcache in my portal (v2).
I have some reports and their data it's not renewed unless I restart the webcache.
How can I disable webcahe for this applications?
Thanks

You are hitting this bug (2676956) - fixed in 9026

Similar Messages

  • Problems with folders and applications after SL upgrade

    I purchased Snow Leopard and installed on my Macbook Pro everything ran smoothly and very impressed with the changes and extra storage on hard drive I checked thoroughly to make sure all was working and could not find a single problem I have Final Cut Studio 3, Photoshop CS3, Aperture, Iwork 09 and more and have had no problems at all using them. So....
    Then feeling secure with Snow Leopard I installed on my MacPro (in exactly the same way which I had previously done on by Macbook Pro!) which I use for my work which has all of the above applications and all of my important documents, pictures, movies, music etc.
    I have 4TB of hard drive split on a RAID set up 1 half is for storage of my footage and editing the 2nd half is everything else including applications.
    Once the installation was complete and I started to hear the music and video for OSX it then started to go through to open up a new account as if I had just purchased a new computer and was setting it up for the first time or when you erase and install (my worst fear!)
    I then in a panic searched for all of my valuable files or applications which I could not seem to find in any of the usual places where they should have been. Then through spotlight managed to find a file I recognised, here is what I have found and I will try to explain.
    What used to be the 1st half of the RAID set up which contained all of the system settings, Library, Music and Applications and for general running the system appears to think this is now not used as the main hard drive but it appears to have all of my applications but I am unable to open any of them as if they are not even there.
    The 2nd half which was used only for media storage and editing now has all of its existing files plus a system folder and a whole new user file with an application folder, document, system setting etc.
    I have tried to just copy across all of the applications to the new working applications folder but they still don't open
    I don't know how to resolve this problem and this is what I need an answer to:
    Is there anyway to save these applications by dragging some kind of system preference or Library setting across to the NEW main Hard drive?
    Do I need to delete all of the applications and reload them all? - VERY TIME CONSUMING!
    Being Mac is there anything easy that would reverse whats happened.
    Any help/ advise greatly appreciated. Still in a panic so if I don't make sense please ask me to clarify.

    malyckjs wrote:
    I have owned a HP Pavilion 330n (AMD Athlon Chip, 512 MB RAM, Win XP; Belkin USB wireless internet connection) for about 6 years now, Its an older computer, but by in large does what have needed it to do. However, software updates and the addition of Norton 360 earlier this year ground it to a halt, so I decided to upgrade to 2GB of RAM (and blow out all of the dust that had accumulated inside the tower) last night.  The RAM registered without a problem and the computer was much more responsive; except for getting the beloved 'blue screen of death' within ten minutes of reboot (IRQ_LESS_THAN_NULL problem).
    After two hours of these lockups and limited troubleshooting, I decided the software stability warranted using the HP software recovery program, so after using the 'normal' (not destructive) recovery program, I'm now getting the "NTLDR is compressed problem; press CTRL+ALT+DEL to REBOOT" -AND- I don't have an external recovery disk that gets me to an to get MSDOS prompt to try to decompress NTLDR. 
    Given the system's age, I cannot imagine that I'm the first person to encounter this problem. Any assistance that can be provide is greatly appreciated.
    Your hard disk might have gone south (become nonfunctional). Is there a hard disk option in your BIOS?
    Best regards,
    erico 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Problem with servlet and application program

    i have this error appearing in my browser...
    i have this feeling it is about the application, but if application alone, i now having some trouble running it, once i bind it with an applet i always have this message:
    HTTP Status 500 -
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    java.lang.NullPointerException
         exString.triming(exString.java:12)
         exString.geta(exString.java:113)
         forplay.play(forplay.java:9)
         textServe.doGet(textServe.java:14)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         org.apache.catalina.servlets.InvokerServlet.serveRequest(InvokerServlet.java:419)
         org.apache.catalina.servlets.InvokerServlet.doGet(InvokerServlet.java:133)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    note The full stack trace of the root cause is available in the Apache Tomcat/5.5.17 logs.
    i know this is a simple problem...
    how come my application is having some difficulty in running my application...
    this servlet by the way is a get parameter base...

    Its caused cuz ur exString is null..
    rgds
    shanu

  • Problem with JSR188 and Application Server 8.2

    Hi there,
    I'm trying to integrate a CC/PP profile in the SOAP's Header in order to apply adaptation logic in a Web Service. An error occurs when the service tries to validate the client's Profile.
    To be more specific, when the line:
    ProfileFactory pf = ProfileFactoryImpl.getInstance();is called in order to create the profile instance, the exception:
    java.security.AccessControlException: access denied
    is thrown (in the server's log file) by the server.
    For the manipulation of the CC/PP I've used the example code that is located in the:
    http://developers.sun.com/techtopics/mobility/midp/articles/ccpp/
    When the same code in executed as a stand-alone application it runs normally.
    Thanks,
    Stavros.

    Hi,
    Give only asadmin> start-domain
    it works! If you want to see what are the commands you can use with asadmin
    try asadmin>help
    MJ

  • Problems with cflogin and application.cfc

    I am creating a reporting site for my clients, and for the
    most part everything works great. That is until the site is viewed
    with Safari 3. When I first look at it, the login page displays
    fine. If I do log in successfully, Safari still displays the login
    form at the top of the page. It also creates frames that are not
    intended to be there. If the login fails, then it displays multiple
    login forms. I've checked the site in both I.E. and FireFox, and
    they appear correctly. Has anyone ever dealt with this?

    post the code - i suspect it is not just your login script at
    play there...
    a link to a sample page would be very helpful, too.
    Azadi Saryev
    Sabai-dee.com
    http://www.sabai-dee.com/

  • Problems with apache and application server

    Hi there,
    I got apache running on the same port as the application server. Each time I want to start the application server or make it work (without displaying the 404 page or an search engine) I have to shut down my apache server!
    Is there a way I can change the port of the application server so that I can run both at the same time ?
    I have J2EE 1.4 version
    Thanks in advance
    Rik

    yes, you can do this via the admin gui by modifying the http listener port.
    You can also do this via the cli commandline as well http-listener-1 is the one you want to change the port for.
    http://docs.sun.com/source/817-6088/httpservice.html has details

  • Problem with installing and running some applications or drivers

    When installing and installing some items, towards the end of the installation I get this message:
    /System/Library/Extensions/comcy_driver_USBDevice.kext
    *was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
    The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?

    Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
    +was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
    Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

  • I am having problems with the Preview application.  When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it.   Any ideas on how to resolve this problem?  Thanks for any help

    I am having problems with the Preview application.  When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it.   Any ideas on how to resolve this problem?  Thanks for any help

    Can you open the Preview program without loading a file, like by itself?
    If it doesn't load then I suspect a corrupt Preview preference file.
    Deleting the System Preference or other .plist file
    Can you open other files with Preview, like jpg's and images?
    How about other PDFs? or is it just that one you have downloaded?
    Run through this list of fixes
    Step by Step to fix your Mac

  • I am having problem with my games application...non of the game run smoothly and also the games close automaticially

    I am having problem with my games application... no idea where is the problem. non of the game run smoothly 1st in 1st its hard to open the apps in it open than also it will close automatically. Please help me out

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..
    If necessary...
    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414

  • Viewing Excel Files using Tomcat - Problem with caching

    Hi all,
    A small part of an application I'm writing has links to Excel files for users to view/download. I'm currently using Tomcat v5 as the web/app server and have some very simple code (an example is shown below) which calls the excel file.
    <%@ page contentType = "application/vnd.ms-excel" %>
    <%
    response.setHeader("Pragma", "no-cache");
    response.setHeader("Cache-Control", "no-cache");
    response.setDateHeader("Expires", 0);
    response.sendRedirect("file1.xls");
    %>
    This all works except but I'm having one big problem.
    The xls file (file1.xls) is updated via a share on the server so each month, the xls file is overwritten with the same name but with different contents. I'm finding that when an update is made to the xls file and the user then attempts to view the new file in the browser they recieve only the old xls file. It's caching the xls file and I don't want it to. How can I fix this so that it automatically gives the user the new updated file.
    The only way I've managed to get Tomcat to do this is to delete the work directory and delete the file from my IE temp folder and then restart Tomcat - this is a bit much!
    Any help would be greatly appreciated.
    Thanks.

    I'd a problem with caching a few years back, for a servlet request which returned an SVG file.
    As a workaround, I ended up putting appending "#" and a timestamp / random number after it. The browser assuming each request was new, and didn't use the cache.
    Eg.
    http://myserver/returnSVG.do#1234567
    where 1234567 is a timestamp / random.
    Not sure whether you can do this on a file based URL... but maybe worth a shot...
    regards,
    Owen

  • Problems with Mail and Safari

    Hi,
    I'm running OS 10.11 and am having some consistent problems with Mail and Safari on my MacPro Dual 2.66. Here they are:
    Sometimes, for no apparent reason, selecting these applications from the dock no longer opens the application (or a new window if already opened), but causes them to be revealed in the finder.
    In Safari, when this problem occurs, another symptom seems to be that new windows will ONLY open in a new tab, even though I have preferences set to open links in a new window. If I click on a bookmark within a folder in the bookmark toolbar, Safari will open ALL the bookmarks in the folder in new tabs!!
    In Mail, when I open my Inbox, clicking on various messages will highlight (in blue) ALL the messages I'm clicking on, instead of simply displaying the highlighted message in the reader.
    The only way to get things back to normal is to reboot my machine, which is getting to be a total drag, especially since this seems to happen fairly often.
    One other thing that may be related- if my screen saver is running, and I move the mouse to go to an active screen, the computer will "freeze." It stays like this indefinitely- I figured out that if I press the button on the machine itself it will go to sleep, and I can wake it up and then everything is fine, but I don't understand what's going on.
    I have tried using Disk Utility and Disk Warrior, and have used OnyX to clean out my system cache and aall sorts of other stuff, but to no avail.
    Is anybody else experiencing any of this? I'm starting to get really frustrated. Thanks for any advice.
    Cheers,
    Andrew

    Scott,
    I had posted earlier that I had Flash payer problems and then QuickTime and PDF preview problems too, on my Intel PowerMac. I could not figure out what the problem was, because fixing permissions and moving plugins did not work. Console indicated that the Quicktime components were not found, with the problem in a webkit pref file somewhere (nil field value). Anyway, I bailed and reinstalled Leopard from a 10.5.0 DVD, and then updated using the combo updater to 10.5.3. Everything worked. Then, after the 'Java for Mac OSX 10.5 Update 1', it all broke again. This time, repairing permissions resulted in:
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Home/lib/jvm.cfg", should be 0, user is 95.
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/classlist" , should be 0, user is 95.
    Now it all works again. This is obviously a flaw with the Java update, and also somehow Disk Utility did not find it earlier. Anyway, take a look at reverting the Java update, or manually changing user for those files (I suppose user 0 is root, but maybe it is nobody).
    Obscure....

  • Problems with JSF and included subviews

    Hi everybody,
    I' ve got a problem with JSF and included subviews which makes me going
    crazy. I've got no clue why my web-pages are represent wrongly. The only
    tip I've got is that it must be connected with the kind I do include my JSF-pages.
    When I use <%@file="sub.jsp"%> my pages are are represent right. When I use <jsp:include page="Sub.jsp" /> or <c:import url="Sub.jsp" /> ( mark: the usage of flush="true" or flush="false" doesn't matter )
    my pages are represent wrongly.
    The usage of tags like f:facet or f:verbatim were also included but didn't point to an solution.
    I searched the whole Sun Developer Forum and some other web-sites for any solution for my problem but the given hints and clues didn't help. Now I'm trying to post my problem directly in Sun's Forum in hope to get help.
    My environment is the following:
    JAVA JDK 1.5 Update 4
    Tomcat 5.5.9
    JSLT 1.1
    Sun JSF 1.1
    Win 2K
    Here's my code:
    Main.jsp
    <%@ page language="java"%>
    <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
    <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
    <%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
    <%
              String path = request.getContextPath();
              String basePath = request.getScheme() + "://" + request.getServerName()
                        + ":" + request.getServerPort() + path + "/";
    %>
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
    <html>
    <head>
         <base href="<%=basePath%>">
         <meta http-equiv="pragma" content="no-cache">
         <meta http-equiv="cache-control" content="no-cache">
         <meta http-equiv="expires" content="0">   
         <meta http-equiv="keywords" content="keyword1,keyword2,keyword3">
         <meta http-equiv="description" content="This is my page">
         <link rel="stylesheet" href="stil.jsp" type="text/css" />
    </head>
    <body>
         <f:view>
              <h:form>
                   <div class="table">
                        <div class="tr">
                             <h:outputText styleClass="tdleft" value="value 1"/>
                             <h:outputText styleClass="tdinfo" value="value 2"/>
                        </div>
                        <div class="tr">
                             <h:outputText styleClass="tdleft" value="value 3"/>
                             <h:outputText styleClass="tdinfo" value="value 4"/>
                        </div>
                   </div>
              </h:form>     
              <jsp:include page="Sub.jsp" />
         </f:view>
    </body>
    </html>Sub.jsp
    <%@ page language="java"%>
    <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
    <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
    <%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
    <f:subview id="subview">
         <h:form>
              <div class="table">
                   <div class="tr">
                             <h:outputText styleClass="tdleft" value="value 11"/>
                             <h:outputText styleClass="tdinfo" value="value 22"/>
                   </div>
                   <div class="tr">
                        <h:outputText styleClass="tdleft" value="value 33"/>
                        <h:outputText styleClass="tdinfo" value="value 44"/>
                   </div>
              </div>
         </h:form>
    </f:subview>stil.jsp
    <%@page contentType="text/css"%>
    <%
        String  schwarz     = "#000000",
                grau1       = "#707070",
                grau2       = "#c0c0c0",
                grau3       = "#e0e0e0",
                grau4       = "#e8e8e8",
                grau5       = "#fdfdfd",
                blau        = "#0000dd",
                tuerkis     = "#00cfff";
        String  liniendicke = "1px",
                linienart   = "solid";
        String allgemeineTextFarbe           = schwarz;
        String allgemeineHintergrundFarbe    = grau3;
        String infoTextFarbe                 = blau;
        String fieldsetRandFarbe             = blau;
        String fieldsetRandDicke             = liniendicke;
        String fieldsetRandArt               = linienart;
        String hrLinienFarbe                 = blau;
        String hrLinienDicke                 = liniendicke;
        String hrLinienArt                   = linienart;
        String inputAktivHintergrundFarbe    = grau5;
        String inputReadonlyHintergrundFarbe = grau4;
        String inputPassivHintergrundFarbe   = grau4;
        String inputPassivFarbe              = schwarz;
        String inputRandFarbe1               = grau1;
        String inputRandFarbe2               = grau5;
        String inputRandDicke                = liniendicke;
        String inputRandArt                  = linienart;
        String inputButtonHintergrundFarbe   = grau3;
        String legendenFarbe                 = blau;
        String linkFarbe                     = blau;
        String linkAktivFarbe                = tuerkis;
        String linkBesuchtFarbe              = blau;
        String linkFocusFarbe                = tuerkis;
        String objectGitterFarbe             = grau5;
        String objectGitterDicke             = liniendicke;
        String objectGitterArt               = linienart;
        String tabellenGitterFarbe           = grau5;
        String tabellenGitterDicke           = liniendicke;
        String tabellenGitterArt             = linienart;
    %>
    <%-- ----------------------------------------------- --%>
    <%-- Textdarstellung mittels der Display-Eigenschaft --%>
    <%-- in den Tags div und span                        --%>
    <%-- ----------------------------------------------- --%>
    *.table {
        display:table;
        border-collapse:collapse;
    *.tbody {
        display:table-row-group;
    *.tr {
        display:table-row;
    *.td,*.tdright,*.tdleft,*.tdinfo,*.th {
        display:table-cell;
        padding:3px;
        vertical-align:middle;
    *.td,*.th {
        text-align:center;
    *.tdright {
        text-align:right;
    *.tdleft {
        text-align:left;
    *.tdinfo {
        color:<%=infoTextFarbe%>;
        text-align:right;
    *.th {
        color:<%=infoTextFarbe%>;
        font-weight:bold;
    }thanks in advance
    benjamin

    Hello Zhong Li,
    many thanks for your post, but it didn't work.
    My problem is that the JSF-Components im my included or imported
    JSP-Pages does not accept any kind of style or styleClass for
    designing. The components take over the informations for colors
    but not for alignment.
    When I take a look at the generated JAVA-Source in $TOMCAT/WORK/WEBAPP for my sub.jsp ( sub.java )
    it seems that the resulting HTML-page would be presented correctly.
    But later when I start the application via Firefox or Mozilla the html-sourcecode is totally wrong.
    In my example I create a simple grid with 2 rows and 2 columns.
    Both columns contains JSF-Outtext-Components and are included with div-tags.
    The generated Sub.java shows that the text would be setted in the div-tags. Unfortunately the html-sourcecode represented by my browser shows that jsf-text is not setted in the tags but in the <h:form> tags. The div-tags are neither rounded by <h:form> nor containing the JSF-OutText-Components.
    Any clue?
    Many thanks Benjamin
    Here is the html-code from Firefox:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
    <html>
    <head>
         <base href="http://polaris21:8080/webtest/">
         <meta http-equiv="pragma" content="no-cache">
         <meta http-equiv="cache-control" content="no-cache">
         <meta http-equiv="expires" content="0">   
         <meta http-equiv="keywords" content="keyword1,keyword2,keyword3">
         <meta http-equiv="description" content="This is my page">
         <link rel="stylesheet" href="stil.jsp" type="text/css" />
    </head>
    <body>
         <form id="_id0" method="post" action="/webtest/Main.faces" enctype="application/x-www-form-urlencoded">
              <div class="table">
                   <div class="tr">
                        <span class="tdleft">value 1</span>
                        <span class="tdinfo">value 2</span>
                   </div>
                   <div class="tr">
                        <span class="tdleft">value 3</span>
                        <span class="tdinfo">value 4</span>
                   </div>
              </div>
              <input type="hidden" name="_id0" value="_id0" />
         </form>     
          <form id="SUB:_id5" method="post" action="/webtest/Main.faces" enctype="application/x-www-form-urlencoded">
               <span class="tdleft">value 11</span>
              <span class="tdinfo">value 22</span>
              <span class="tdleft">value 33</span>
              <span class="tdinfo">value 44</span>
              <input type="hidden" name="SUB:_id5" value="SUB:_id5" />
         </form>
         <div class="table">
              <div class="tr">
              </div>
              <div class="tr">
              </div>
         </div>
    </body>
    </html>

  • Problem with JFrame and busy/wait Cursor

    Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
    for the duration of some operation (usually just a few seconds).
    I can get it to work in some situations, but not others.
    Timing does seem to be an issue.
    There are thousands of posts on the BugParade, but
    in general Sun indicates this is not a bug. I just need
    a work-around.
    I've written a test program below to demonstrate the problem.
    I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
    I have not tested on Windows yet.
    When you run the following code, three JFrames will be opened,
    each with the same 5 buttons. The first "F1" listens to its own
    buttons, and works fine. The other two (F2 and F3) listen
    to each other's buttons.
    The "BUSY" button simply sets the cursor on its listener
    to the busy cursor. The "DONE" button sets it to the
    default cursor. These work fine.
    The "SLEEP" button sets the cursor, sleeps for 3 seconds,
    and sets it back. This does not work.
    The "INVOKE LATER" button does the same thing,
    except is uses invokeLater to sleep and set the
    cursor back. This also does not work.
    The "DELAY" button sleeps for 3 seconds (giving you
    time to move the mouse into the other (listerner's)
    window, and then it behaves just like the "SLEEP"
    button. This works.
    Any ideas would be appreciated, thanks.
    -J
    import java.awt.BorderLayout;
    import java.awt.Cursor;
    import java.awt.event.ActionEvent;
    import java.awt.event.ActionListener;
    import javax.swing.JButton;
    import javax.swing.JFrame;
    import javax.swing.JPanel;
    import javax.swing.SwingUtilities;
    public class BusyFrameTest implements ActionListener
    private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
    private static Cursor done = Cursor.getDefaultCursor();
    JFrame frame;
    JButton[] buttons;
    public BusyFrameTest (String title)
    frame = new JFrame (title);
    buttons = new JButton[5];
    buttons[0] = new JButton ("BUSY");
    buttons[1] = new JButton ("DONE");
    buttons[2] = new JButton ("SLEEP");
    buttons[3] = new JButton ("INVOKE LATER");
    buttons[4] = new JButton ("DELAY");
    JPanel buttonPanel = new JPanel();
    for (int i = 0; i < buttons.length; i++)
    buttonPanel.add (buttons);
    frame.getContentPane().add (buttonPanel);
    frame.pack();
    frame.setVisible (true);
    public void addListeners (ActionListener listener)
    for (int i = 0; i < buttons.length; i++)
    buttons[i].addActionListener (listener);
    public void actionPerformed (ActionEvent e)
    System.out.print (frame.getTitle() + ": " + e.getActionCommand());
    if (e.getActionCommand().equals ("BUSY"))
    frame.setCursor (busy);
    else if (e.getActionCommand().equals ("DONE"))
    frame.setCursor (done);
    else if (e.getActionCommand().equals ("SLEEP"))
    frame.setCursor (busy);
    try { Thread.sleep (3000); } catch (Exception ex) { }
    frame.setCursor (done);
    System.out.print (" finished");
    else if (e.getActionCommand().equals ("INVOKE LATER"))
    frame.setCursor (busy);
    SwingUtilities.invokeLater (thread);
    else if (e.getActionCommand().equals ("DELAY"))
    try { Thread.sleep (3000); } catch (Exception ex) { }
    frame.setCursor (busy);
    try { Thread.sleep (3000); } catch (Exception ex) { }
    frame.setCursor (done);
    System.out.print (" finished");
    System.out.println();
    Runnable thread = new Runnable()
    public void run()
    try { Thread.sleep (3000); } catch (Exception ex) { }
    frame.setCursor (done);
    System.out.println (" finished");
    public static void main (String[] args)
    BusyFrameTest f1 = new BusyFrameTest ("F1");
    f1.addListeners (f1);
    BusyFrameTest f2 = new BusyFrameTest ("F2");
    BusyFrameTest f3 = new BusyFrameTest ("F3");
    f2.addListeners (f3); // 2 listens to 3
    f3.addListeners (f2); // 3 listens to 2

    I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
    I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread.

  • Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated by itself and now outlook and address book have each over 340,000. What should I do?

    Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
    My Macbook pro is just 2 months old.
    What should I do? Is there a way to delete my Mac Address Book without having the problem above?
    Many thanks
    Regis

    zlatan24 wrote:
    For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
    If it is a windows problem it's not going to run on the OP's MacBook Pro

  • Problem with trigger and entity in JHeadsart, JBO-25019

    Hi to all,
    I am using JDeveloper 10.1.2 and developing an application using ADF Business Components and JheadStart 10.1.2.27
    I have a problem with trigger and entity in JHeadsart
    I have 3 entity and 3 views
    DsitTelephoneView based on DsitTelephone entity based on DSIT_TELEPHONE database table.
    TelUoView based on TelUo entity based on TEL_UO database table.
    NewAnnuaireView based on NewAnnuaire entity based on NEW_ANNUAIRE database view.
    I am using JHS to create :
    A JHS table-form based on DsitTelephoneView
    A JHS table based on TelUoView
    A JHS table based on NewAnnuaireView
    LIB_POSTE is a :
    DSIT_TELEPHONE column
    TEL_UO column
    NEW_ANNUAIRE column
    NEW_ANNUAIRE database view is built from DSIT_TELEPHONE database table.
    Lib_poste is an updatable attribut in TelUo entity, DsitTelephone entity, NewAnnuaire entity.
    Lib_poste is upadated in JHS table based on TelUoView
    I added a trigger on my database shema « IAN » to upadate LIB_POSTE in DSIT_TELEPHONE database table :
    CREATE OR REPLACES TRIGGER “IAN”.TEL_UO_UPDATE_LIB_POSTE
    AFTER INSERT OR UPDATE OFF lib_poste ONE IAN.TEL_UO
    FOR EACH ROW
    BEGIN
    UPDATE DSIT_TELEPHONE T
    SET t.lib_poste = :new.lib_poste
    WHERE t.id_tel = :new.id_tel;
    END;
    When I change the lib_poste with the application :
    - the lib_poste in DSIT_TELEPHONE database table is correctly updated by trigger.
    - but in JHS table-form based on DsitTelephoneView the lib_poste is not updated. If I do a quicksearch it is updated.
    - in JHS table based on NewAnnuaireView the lib_poste is not updated. if I do a quicksearch, I have an error:
    oracle.jbo.RowAlreadyDeletedException: JBO-25019: The row of entity of the key oracle.jbo. Key [null 25588] is not found in NewAnnuaire.
    25588 is the primary key off row in NEW_ANNUAIRE whose lib_poste was updated by the trigger.
    It is as if it had lost the bond with the row in the entity.
    Could you help me please ?
    Regards
    Laurent

    The following example should help.
    SQL> create sequence workorders_seq
      2  start with 1
      3  increment by 1
      4  nocycle
      5  nocache;
    Sequence created.
    SQL> create table workorders(workorder_id number,
      2  description varchar2(30),
      3   created_date date default sysdate);
    Table created.
    SQL> CREATE OR REPLACE TRIGGER TIMESTAMP_CREATED
      2  BEFORE INSERT ON workorders
      3  FOR EACH ROW
      4  BEGIN
      5  SELECT workorders_seq.nextval
      6    INTO :new.workorder_id
      7    FROM dual;
      8  END;
      9  /
    Trigger created.
    SQL> ALTER SESSION SET NLS_DATE_FORMAT = 'DD-MON-YYYY HH24:MI:SS';
    Session altered.
    SQL> insert into workorders(description) values('test1');
    1 row created.
    SQL> insert into workorders(description) values('test2');
    1 row created.
    SQL> select * from workorders;
    WORKORDER_ID DESCRIPTION                    CREATED_DATE
               1 test1                          30-NOV-2004 15:30:34
               2 test2                          30-NOV-2004 15:30:42
    2 rows selected.

Maybe you are looking for