Problem with Calc Dim

Hi, I'm getting pretty confused now... I'm trying to correct a modelbuilt by someone else a while ago (not much is working). Ineed to do a calc dim on a budget center dimension and for whateverreason, I receive an error message each time. I don't seeanything weird with that dimension... and I'm receiving an errormessage saying it is an Invalid Cal script syntax (but there is noerror in the syntax). Any idea??? Thank you Marie Vaillancourt

Oh, I'm still confused... The name is Function (we arecreative here on how to call budget center!), and for the alias Iused Functions and it works... Is Function means anythingelse for Essbase??? I can't change the name of the dimension,this model has been around for years and too many people are doingretreival on it.

Similar Messages

Problem with Calc Script

Hello,can some one help us. we would like to calculate a field (COGS) with the following calc script:"02-02"("02-02"->"2001"->HRG_2002 ="01-02"->HRG_2002*("02-02"->"2001"->HOCHRECHNUNG / "01-02"->HOCHRECHNUNG->"2001");)01-01 = Sales02-02 = COGS2001 = Fiscal YearHRG_2002 = Member of ScenarioHochrechnung= Member of ScenarioThe script runs but does not insert any numbers into the database.We would like to use the ratio COGS/Sales from one scenario into another with different Sales.Hope someone can help!Best regards,Bob

Found the missing codeSET UPDATECALC OFF; Once I have added this it worked.Bob

Calc Dim Problem

Hi gurus,
i have a calcscript to clear data(replacing data with #missing) in particular combinations and aggregating the period dim by using Calc Dim.
Problem is,when i cleared data first time in Halfyearly2 it is only clearing data For Idesc of H2 and aggregating correctly with H1 data to YearTotal.
Now second time when cleared data in Halfyearly1 data clear is succesfull but comes to aggregation still i have data in Yeartotal though
descendants of H2 data and H1 data is missing.
Why i'm still having data in yeartotal though Idesc of H1 and Idesc fo H2 data is missing and also aggregating the period dim.
thanks in advance
Edited by: kailash on Sep 17, 2011 7:22 PM

Hi Kailash - this all sounds like normal Essbase BSO behaviour. You can control whether missing values aggregate up using the SET AGGMISSG command / 'Aggregate Missing Values' database settings. Check out the Tech Ref / DBAG / EAS Help sections:
http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_tech_ref/set_aggmissg.html
http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_dbag/dcaoptcs.html#dcaoptcs61358
http://download.oracle.com/docs/cd/E17236_01/epm.1112/eas_help/aggmissg.html
The brief explanation is that with AGGMISSG ON, where all child values are #Missing a calculation will roll them up to a #Missing value at the parent. With AGGMISSG OFF, where all child values are #Missing a calculation will not alter the parent value.
You have to be careful with using this globally if you sometimes load data directly to non-level-zero members, as values can then be overwritten.

Problem with a calc involving @MDSHIFT and Dynamic Calc

Hi all,
I have a problem with the calculation of a member in a calc script. The formula of this member is :
"R70100"
IF(@ISMBR("M01"))
("T_008"->"Cumul"->"HT"+"T_003"->"Cumul"->"HT")*"AVCT_PR" - @MDSHIFT("R70100" -> "Cumul" -> "HT" -> "M12", -1, "Year", );
ELSE
("T_008"->"Cumul"->"HT"+"T_003"->"Cumul"->"HT")*"AVCT_PR" - @MDSHIFT("R70100" -> "Cumul" -> "HT", -1, "Period", );
ENDIF
- R70100 is a member of a dense dimension.
- T_008, T_003 and AVCT_PR are spare and stored.
- "Cumul" is a dynamic member which allow us to calculate cumulative from monthly.
- Time is split into two dimensions, Period and Year.
The problem is that the @MDSHIFT doesn't seems to work with the dynamic calc as the monthly result is the cumulative correct value. I didn't know what is wrong BUT each time I launch the script, values are good for one more month.
After one run, for example, I obtained this result :
!http://zenon.apartia.fr/stuff/200910070001.GIF!
Two run later, here are the news values :
!http://zenon.apartia.fr/stuff/200910070002.GIF!
Any idea on what going on and how to correct it ? Thanks !
Frédéric

A couple of questions for you:
1) Do you need the overhead of @MDSHIFT when you are only moving in one dimension? Wouldn't @PRIOR have been a lot easier? At least this is true for the ELSE condition.
2) Could you post just the results of the @MDSHIFT calculation so we (okay, this may be just for me, it's still breakfast time here and not enough coffee has been ingested yet to read a spreadsheet without recourse to the formulas) can better see the impact?
3) Have you tried using your code against a non-dynamic member? Does it make a difference?
Regards,
Cameron Lackpour

My speakers on my mac don't work.the icon is dimmed and it won't let me play music or Skype.it tells me i have a problem with my speakers

my speakers on my mac don't work.the icon of the speaker is dimmed and it won't let me play music or Skype.it tells me i have a problem with my speakers

you may have flipped the micro switch inside the audio jack. To rectify this issue take a toothpick an gently wiggle it inside your audio jack.

HT1567 GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE PO

GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE POWER

Please don't shout.
Has the unit EVER been jailbroke? Has it EVER been dropped? Did it EVER get excessively wet? Did you EVER load a pirated developer's version of the IOS?
If "No" to all the above, first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this.

I have a problem with my new Apple Air. It usually takes few seconds for the laptop to be untouched in order to be locked. So sometimes when the screen starts to get dim in order to lock, I immediately touch the keypad to avoid locking the laptop

I have a problem with my new Apple Air. It usually takes few seconds for the laptop to be untouched in order to be locked. So, sometimes when the screen starts to get dim in order to lock, I immediately touch the keypad to avoid locking the laptop, the result is a black screen appears with no responding to anything from pressing the keyboard to pressing the touchpad. It takes few minutes for the laptop to open again and then a message appears saying that there was a problem with the lock security.
What is happening exactly?

It sounds like your sleep timers are set to too low of a value. Go to System Preferences -> Energy Saver and set both timers to longer times. The computer sleep timer should be a longer time than the display sleep timer.

Irritating problem with Retina Display; dims/ flickers on and off and in weird pattern along bottom of screen

I bought a 13-inch Retina MBP in late September 2014, just a few months ago and i am starting to have problems with the screen.
First of all, the screen will sometimes fade and a weird pattern will appear at the bottom of the screen in which every second set of backlights is off and the other is on. Here is a picture that i found on the internet; from a much older mac though but still shows the problem.
The second problem, which is more irritating, is that every now and again the screen will sort of flicker where it will get darker then lighter and keep switching the brightness in a matter of seconds. This is so hard to look at!!
Hopefully there is an easy solution however i may have to take it to an Apple store and unfortunately get it replaced.
Thanks.

Howdy there chappo_10,
It sounds like you have a couple of unexpected video issues on your 13 inch MacBook Pro. I'd like to recommend these troubleshooting steps specifically to hep you determine if you need to take it to the Apple Store:
Apple computers: Troubleshooting issues with video on internal or external displays
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Take care,
Sterling

Calc problem with fact table measure used as part of bridge table model

Hi all,
I'm experiencing problems with the calculation of a fact table measure ever since I've used it as part of a calculation in a bridge table relationship.
In a fact table, PROJECT_FACT, I had a column (PROJECT_COST) whose default aggregate was SUM. Whenever PROJECT_COST was used with any dimension, the proper aggregation was done at the proper levels. But, not any longer. One of the relationships PROJECT_FACT has is with a dimension, called PROJECT.
PROJECT_FACT contains details of employees and each day they worked on a PROJECT_ID. So for a particular day, employee, Joe, might have a PROJECT_COST of $80 for PROJECT_ID 123, on the next day, Joe might have $40 in PROJECT_COST for the same project.
Dimension table, PROJECT, contains details of the project.
A new feature was added to the software - multiple customers can now be charged for a PROJECT, where as before, only one customer was charged.
This percentage charge break-down is in a new table - PROJECT_BRIDGE. PROJECT_BRIDGE has the PROJECT_ID, CUSTOMER_ID, BILL_PCT. BILL_PCT will always add up to 1.
So, the bridge table might look like...
PROJECT_ID CUSTOMER_ID BILL_PCT
123 100 .20
123 200 .30
123 300 .50
456 400 1.00
678 400 1.00
Where for project 123, is a breakdown for multiple customers (.20, .30. .50).
Let's say in PROJECT_FACT, if you were to sum up all PROJECT_COST for PROJECT_ID = 123, you get $1000.
Here are the steps I followed:
- In the Physical layer, PROJECT_FACT has a 1:M with PROJECT_BRIDGE as does PROJECT to PROJECT_BRIDGE (a 1:M).
PROJECT_FACT ===> PROJECT_BRIDGE <=== PROJECT
- In the Logical layer, PROJECT has a 1:M with PROJECT_FACT.
PROJECT ===> PROJECT_FACT
- The fact logical table source is mapped to the bridge table, PROJECT_BRIDGE, so now it has multiple tables it maps to (PROJECT_FACT & PROJECT_BRIDGE). They are set for an INNER join.
- I created a calculation measure, MULT_CUST_COST, using physical columns, that calculates the sum of the PROJECT_COST X the percentage amount in the bridge table. It looks like: SUM(PROJECT_FACT.PROJECT_COST * PROJECT_BRIDGE.BILL_PCT)
- I brought MULT_CUST_COST into the Presentation layer.
We still want the old PROJECT_COST around until it get's phased out, so it's in the Presentation layer as well.
Let's say I had a request with only PROJECT_ID, MULT_CUST_COST (the new calculation), and PROJECT_COST (the original). I'd expect:
PROJECT_ID MULT_CUST_COST PROJECT_COST
123 $1000 $1000
I am getting this for MULT_CUST_COST, however, for PROJECT_COST, it's tripling the value (possibly because there are 3 percent amounts?)...
PROJECT_ID MULT_CUST_COST PROJECT_COST
123 $1000 (correct) $3000 (incorrect, it's been tripled)
If I were to look at the SQL, it would have:
 SELECT SUM(PROJECT_COST),
SUM(PROJECT_FACT.PROJECT_COST * PROJECT_BRIDGE.BILL_PCT),
 PROJECT_ID
 FROM ...
 GROUP BY PROJECT_ID
PROJECT_COST used to work correctly before modeling a bridge table.
Any ideas on what I did wrong?
Thanks!

Hi
Phew, what a long question!
If I understand correctly I think the problem lies with your old cost measure, or rather combining that with you new one in the same request. If you think about it, your query as explained above will bring back 3 rows from the database which is why your old cost measure is being multiplied. I suspect that if you took it out of the query, your bridge table would be working properly for the new measure alone?
I would consider migrating your historic data into the bridge table model so that you have a single type of query. For the historic data each would have a single row in the bridge with a 1.0 BILL_PCT.
Best of luck,
Paul
http://total-bi.com

Problem in executing calc dim calculation command

why does calc dim does not work when xref function is used in account hierarchy......
while i was trying to use the said command essbase was giving error which specified "login credentials do not match"
and the log which created was" Error retrieving user by identity"

Read this...
http://forums.oracle.com/forums/ann.jspa?annID=599
and then post in the correct forum for your question (which to be honest I can't figure out myself as I haven't a clue what you're referring to)

TS1559 please help me...my iphone 4s has a problem with wi-fi settings grayed out or dim

please help me...my iphone 4s has a problem with wi-fi settings grayed out or dim

http://support.apple.com/kb/TS1559

What is wrong with this? AGG on sparse and Calc Dim on Dense?

I have this....
FIX(@IDESC(Sparse parent member))
CALC DIM(Dense,Dense,Dense);
Agg(Sparse,Sparse);
ENDFIX
No formulas in outline ....just followed simple perf impro technique.....as they say...agg faster on sparse.Syntatically is abstly right but result is not right......?
Whats the catch? do i need to attend some basic classes???:-P
Edited by: 961729 on Sep 26, 2012 10:27 PM

Thanks Cameroon and Tim for your reply!
Perhaps i should have listed more details...my bad!. Anyway my idea was to know if two of below fixes produce same result...?
Fix(Sparse)
Calc dim(Dense,Dense,Dense,Sparse,Sparse);
Endfix
Fix(Sparse)
Calc dim(Dense,Dense,Dense);
Agg(Sparse.Sparse);
Endfix
Coming to my earlier mentioned fix....well that is the conclusive fix of my allocation script..I have two children of version dim. One is used for allocation and other to put adjustment. So in that fix iam just aggregating all dim for version dim (allocation +adjustment).

Problem with Battery and Keyboard Light

First off, sorry if this is in the wrong section. This is my first time on these forums.
Just today I was skyping my girlfriend on my Macbook Pro (that I got in the summer or 2010). I have SmcFanControl installed and I regularly use it to monitor/increase my fan speed. As I regularly skype and play WoW on this computer, my computer temp often sits around 160-170 degrees F.
Today it was at around 170 and I had it on my lap. I sat up and jostled the computer a little and it shut off. The power cord light, which was green, immediately turned off. I tried unplugging it and plugging it back in and it stayed off. The computer wouldnt restart for about 30 seconds. Finally after hitting the power button several times it turned on.
It worked fine for 10 or so minutes. I assumed I just moved it too suddenly, although I have never had a problem with that before. Then, I moved again and it shut off AGAIN. It took another 30 seconds to register the power cord and to turn on.
This time, when it booted up, it said my clock was set to a date before 2008, althought it was still at Feb 16, 2011. Also, as soon as I turned it on, the fans were going full speed (as loud as when i have SmcFanControl set at 6200 rpm). I opened SmcFancontrol and it says my computer's temp is at 32 Degrees F and 000 rpm, which I know is not correct. I can't change the speed of the fans and the temp of the computer hasnt changed at all.
Also, my battery icon has an X through it and says "No batteries available" "Power Source: Power Adapter." The green light is very dim on the charger.
AND on top of this, my keyboard lights no longer turn on, even pushing F5 and F6. I am in a dim room so they should auto turn on.
I am afraid that I may have overheated the computer, but I was wondering if anyone has any advice. I was thinking of opening the back up but I dont have a small enough screwdriver at the momment. I also tried doing the "top -u -s3" command to check cpu% and my highest one is Firefox around 10-15%.
Any help would be appreciated. I'm thinking this is gonna require a look at the Apple Store, however I am an out of state college student and I'm not returning home for another week and I need my computer for assignments.
Sorry for the wall of text. Thanks in advance.
P.S. My computer is up to date.

SMC reset works best with anything that relies on power for the machine. When it comes to batteries SMC reset and PRAM usually do the trick. Also a lot of people miss this, do not plug on the top plugs use the lower plug.
As for the temperature on the lap, expect a lot of heat, the computers are designed to lay on flat SOLID surfaces. The underbelly on aluminum chassis laptops act as a heatsink. In addition the rubber feet keep the product high enough so air can pass through and help cool the system.
As far as the adapter you can have AppleCare send you without waiting a week for it. If it is an obvious hardware problem they may do an exception for you if you are out of phone support. Highly recommend APP for the phone support. You would have a battery on it's way to your current location in a couple days!

Problem with layout and changing content

Hi, I`m new to Swing and I have a problem with layout.
I want to make a menu using JButtons so that depending on which button you click you`ll get different content in the window. And first of all I don`t know how to center the buttons.
I have a JFrame called GameWindow that has a JPanel field called content. My idea was to create a JPanel with buttons and then using ActionListeners change the JPanel held in 'content'.
Here`s the code:
public class GameWindow extends JFrame{
     private static final long serialVersionUID = 1L;
     private JPanel content;
     private Player player;
     public GameWindow(){
          super("Dawn Crystal");
          Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
          setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
          setSize((int)screenSize.getWidth(), (int)screenSize.getHeight());
          setExtendedState(MAXIMIZED_BOTH);
     public void mainMenu(){
          content = new MainMenu(this);
          Dimension dim = content.getSize();
          setLayout(null);
          Dimension screen = Toolkit.getDefaultToolkit().getScreenSize();
          int x = (int)((screen.getWidth() - dim.getWidth()) / 2);
          int y = (int)((screen.getHeight() - dim.getHeight()) / 2);
          int dimX = (int)dim.getWidth();
          int dimY = (int)dim.getHeight();
          content.setBounds(x, y, 120, 120);
          getContentPane().add(content);
          setVisible(true);
     public void adventureScreen(){
          //so far empty
     public void createNewPlayer(){
          content.setVisible(false);
          content = new NewPlayerCreationWindow();
          getContentPane().add(content);
          content.setVisible(true);
          //setVisible(true);
     public void setPlayer(Player p){ player=p; }
public class MainMenu extends JPanel{
     private static final long serialVersionUID = 1L;
     private JPanel mainMenuButtons;
     private JButton newGame;
     private JButton loadGame;
     private JButton options;
     private JButton exit;
     public MainMenu(GameWindow par){
          mainMenuButtons = new JPanel();
          //create buttons
          newGame = new JButton("NEW GAME");
          loadGame = new JButton("LOAD GAME");
          options = new JButton("OPTIONS");
          exit = new JButton("EXIT");
          //create action listeners
          newGame.addActionListener(new NewGameListener());
          exit.addActionListener(new ExitListener(par));
          //add buttons to panel
          mainMenuButtons.setLayout( new GridLayout(4,1));
          mainMenuButtons.add(newGame);
          mainMenuButtons.add(loadGame);
          mainMenuButtons.add(options);
          mainMenuButtons.add(exit);
          add(mainMenuButtons);
}When it displays the buttons are at the top of the frame rather than in the center - I thought that was how the default layout would behave. So that`s my first question - how to center it.
Secondly I have NewPlayerCreationWindow written but when I call createNewPlayer() I get an empty frame - what am I doing wrong?
Finally I`d like to ask how can I make the frame appear as maximized when the application is started? The setExtendedState(MAXIMIZED_BOTH); doesn`t help actually because the window`s height is too big and a part of window is hidden under the system bar. I want to have it maximized regardless of screen resolution.

Use a [url http://java.sun.com/docs/books/tutorial/uiswing/layout/visual.html]Card Layout.

Problem with installing R12 with Win 2008 (Rapidwiz 12.1.1.9)

I could really use someones help.
I did a download recently of Oracle Financials R12 for windows (I'm using WIN 2008 server) which contained version 12.1.1.9 Rapidwiz. I was unable to get it to work as individual DVD's which is fine, I build the staging area and had better results.
The first error I encountered was the release contained JRE 1.6 but the install referenced 1.5. I took a suggestion that I saw to copy the directory and rename it which worked just fine.
The next error I encountered came during the database install. There was some problem with the database service. It sounds similar to a problem discussed about just the database not related to Oracle Financials but the "fix" to just start the database doesn't seem to apply.
Below is the Rapidwiz log. The warning first mentioned is to check to be sure that the Administrator user being used in the install belongs to the administrator user group which of course it does.
I've brought to the top of the log, the error that I think is occurring. Please help me install, I'm trying to evaluate the software but having trouble with just the install is concerning.
Brought up from log
"runProcess_5"
C:\Users\Administrator\AppData\Local\Temp>REM
C:\Users\Administrator\AppData\Local\Temp>REM Set user to the ORA_DBA group
C:\Users\Administrator\AppData\Local\Temp>REM
C:\Users\Administrator\AppData\Local\Temp>NET LOCALGROUP ORA_DBA /ADD /COMMENT:"Members can connect to the Oracle database as a DBA without a password"
C:\Users\Administrator\AppData\Local\Temp>NET LOCALGROUP ORA_DBA TOBEY\Administrator /ADD
DIM-00019: create service error
O/S-Error: (OS 1388) A new member could not be added to a local group because the member has the wrong account type.
C:\Users\Administrator\AppData\Local\Temp>if 75 == 0 goto :INSTSRV_OK
C:\Users\Administrator\AppData\Local\Temp>echo "Cannot install service for database ORACLE_HOME\n";
"Cannot install service for database ORACLE_HOME\n";
RW-50010: Error: - script has returned an error: 75
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Rest of log available if it would help. Thanks!

Thanks for the starting point.
The user I am using for the install is Administrator and I confirmed using the NET command that Administrator is a member of the Administrators group and the Domain user group.
Result of NET USER ADMINISTRATOR:
C:\StageR12\startCD\Disk1\rapidwiz>net user administrator
User name Administrator
Full Name
Comment Built-in account for administering the computer/dom
ain
User's comment
Country code 000 (System Default)
Account active Yes
Account expires Never
Password last set 5/24/2011 6:31:40 PM
Password expires 7/5/2011 6:31:40 PM
Password changeable 5/25/2011 6:31:40 PM
Password required Yes
User may change password Yes
Workstations allowed All
Logon script
User profile
Home directory
Last logon 6/1/2011 8:23:40 AM
Logon hours allowed All
Local Group Memberships Administrators       ora_dba
*WSS_ADMIN_WPG
Global Group memberships Domain Users         Schema Admins
Enterprise Admins    Domain Admins
*Group Policy Creator
The command completed successfully.
I still get the warning message about the user account but continue as other posts indicate.
Still get get the error.
The Oracle VIS VSS Writer Service service is starting.
The Oracle VIS VSS Writer Service service was started successfully.
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1388) A new member could not be added to a local group because the member has the wrong account type.
C:\Users\Administrator\AppData\Local\Temp>if 75 == 0 goto :INSTSRV_OK
C:\Users\Administrator\AppData\Local\Temp>echo "Cannot install service for database ORACLE_HOME\n";
"Cannot install service for database ORACLE_HOME\n";
RW-50010: Error: - script has returned an error:75
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
instantiate file:
I see that there is a version of Rapidwiz beyond my 12.1.1.9, is this required to get around this?
Is there another cause of this error?
Am I understanding the assignments to administrator correctly?

Problem with Calc Dim

Similar Messages

Maybe you are looking for