Problem with calendar control in report preview

I am using Crystal Reports XI.
When I preview reports containing a date/time parameter the calendar control does not work. Clicking on it brings up a JavaScript error box indicating that the page has an error and whether I want to continue running scripts on the page.
This started happening after I installed the stand alone CR viewer.
Uninstalling the viewer did not help.
Please help!
Regards
Lawrence

Hi,
Unfortunately there is no exact solution fot this issue. but still try replacing prompt.dll which is located in
C:\Program Files\Business Objects\Common\3.5\bin
with the working one.
hope for the best
Regards,
Harry.

Similar Messages

Who else has a problem with parental controls enabled not being able to run Firefox on the Mac?

Who else has a problem with parental controls enabled not being able to run Firefox on the Mac? (Any solutions?) (BTW. Chrome doesn't work either)

Although FF4 is so nice I'm almost ready to ditch iGoogle!
Please fix what appears to be an RSS/iGoogle issue with FF4...
Gmail is fine, but titles dont show in most RSS feed gadgets and no stories, strangely, apart from this one:
http://www.google.com.au/ig/directory?hl=en&url=www.google.com/ig/modules/builtin_news_technology.xml
Which if you enter the last part of the url reports that
"<Content type="html">
This is a builtin module, so the UserPrefs and Content are ignored."
Any ideas?

Problem with calendar on iMac

Problem with calendar on iMac since downloading Mavericks and attempting to connect to icloud. Upon opening calendar a window opening stating 'moving calendars to server account' which has been going for days.
please advise any possible solutions.
Thanks

Does this help?
https://discussions.apple.com/message/23531400#23531400

Master Plan - problem with calendar into Subproject

If the
save in the sub-project baseline
and then connecting it to the
master plan during the publication of
the master plan, an error is returned
"not found the appropriate calendar project............".
The solution is to
first connect the subproject to the master
plan and only store in the
sub-project baseline. Do you know why this is happening
and whether Microsoft is going to fix it?
Do you know when I may see the problem
with calendars, which should be avoided?

If the
save in the sub-project baseline
and then connecting it to the
master plan during the publication of
the master plan, an error is returned
"not found the appropriate calendar project............".
The solution is to
first connect the subproject to the master
plan and only store in the
sub-project baseline. Do you know why this is happening
and whether Microsoft is going to fix it?
Do you know when I may see the problem
with calendars, which should be avoided?

Having serious problems with calendar duplications, one birthday now showing 174 times on one day! Help!

Having serious problems with calendar duplications, one birthday now showing 174 times on one day! Help!

Having serious problems with calendar duplications, one birthday now showing 174 times on one day! Help!

Problem with Table control lines

Hi Friends,
This is the problem with table control lines:
I have screen with table control and I would like change the table control lines dynamicaly.
Exp:
In my PBO the Internal table which I am using to loop the TC is havig 7 records and its displayed with 7 records, now I have added one more record into my ITAB and now ITAB is having 8 records, when I am looping this ITAB with TC its taking the TC lines 7 only.
here is the code:
Initial values in gt_scr400 = 8
Initial values in tc_scr400 = 8
Now added one more recor into gt_scr400 , now gt_scr400 = 9.
LOOP AT   gt_scr400
       INTO wa_scr400
       WITH CONTROL tc_scr400
       CURSOR tc_scr400-current_line.
ENDLOOP.
I have used this logic :
DESCRIBE TABLE gt_scr400 LINES g_rec_300 .
tc_scr300-lines = g_rec_300.
but its not modifying the lines in my table control.
How to change the TC lines based on ITAB total records.
Thanks,
Sridhar

there is a field in TableViewName-xxx
don't remember the exact field name for (total no of records)
you can check it in debug. when you add records in Internal table, u need to modify this field which is set at the first time when table control is populated.

Keyboard problem with T410 - Control Key

I have a problem with the control keys on the keyboard of T410.
I swapped my X200 keyboard over to T410 to check if it is software or hardware issues. With the X200 keyboard, the 'Ctrl' key is not working. With the T410 keyboard, 'e', 'd', 'c' and 'Ctrl' keys are not working.

Welcome to the forum!
I believe that X200 and T410 keyboards are mapped differently in BIOS.
Can you find another T410/T510 keyboard to test with?
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

URGENT ! JDEV 10.1.2 Problem with data control generated from session bean

I got a problem with data control generated from session bean which return a collection of data transfer object.
The dto's seem to be correct. The session bean load correctly the data into and the object's are plenty of data. Using the console to display the dto content is ok.
When generating a data control from this session bean and associate the dto included in the collection only the first object level and one-to-one dto object are correctly setted in the data control. Object that represent collection into the dto (one-to-many foreign key) are setted as collection with an iterator but the structure of the object is not setted. I don't know how to associate this second level of collection with the dto bean class to obtain the attributes definition.
I created a case with hr schema like the hrApp demo application in the tutorial with departments and employees table. I got the same problem.
Is it a bug ?
It exists a workaround to force the data control to understand the collection data structure ?
Help is welcome ! this is urgent !!!

we found the problem by assigning the child dto bean class to the node representing the iterator in the xml file corresponding to the master dto.

Help me, I have a problem with font when export report to PDF?

Hi everyone! Help me
I have a problem with font when export report to PDF
My report uses template .rtf with font Times New Roman (Unicode), language is VietNamese.
when desige template no problem, error only happen when view report by PDF.
Edited by: user10236405 on Oct 15, 2008 11:23 PM

give it time to boot. the time depends on yr memory size n data. soon a process bar will appear indicating the boot process. if still this doesnt work. try formating the phone. but this ways u lose all data on the phone (unless u backed it). relax! the data on the memory card is safe.

Since updating my iPhones, iPad and MacBook Pro I'm having problems with Calendars...

Since updating my iPhones, iPad and MacBook Pro I'm having problems with Calendars - I keep all the details of my work schedule on Calendars but since updating everything I am notified at 9 a.m. before each of my days off. Can someone please tell me how I can stop this? Also, how can I change that time (9a.m.) if I do want to be notified about something?
Thanks.

troubleshooting message http://support.apple.com/kb/ts2755
Do you have MMS turn on in Settings?
Are you provisioned by your carrier to use MMS?
Lastly, give your phone carrier a call, as MMS is a carrier feature.

My iphone won't sync with outlook. Same problem with calendar entries

contacts added to my iphone 4 won't sync with outlook 2003 running on windows 7. Same problem with calendar entries.

same here. Have you received any answers?

Problems with calendar on iCloud

I am having problems with calendar event created on my IPhone 4S syncing to my IPad.

Don't worry I've sorted it! I just had to turn off Reminders as well in iCloud. Calendar then worked fine, even when I turned Calendar and Reminders back on.

I have just changed my iCloud account and am now having serious problems with Calendar on my Macbook Pro. Any ideas?

I decided to start using iCloud etc but discovered that my Apple ID doesn't actually exist (I was literally told this over the phone my an Apple Support worker) which is weird, as my email address for this Apple ID still exists. This is the first time I'd had any problems of this sort as I'd never had to use my Apple ID before. So anyway, I signed out of iCloud (i.e. signed out of my non-existant account) and signed in with my other, working, iCloud account which I've had absolutely no problems with whatsoever. All well and good.
Before signing out of/deleting my old iCloud account I moved all my events in Calendar from "iCloud" to "On My Mac" so that I wouldn't lose the information when switching to my new account. No problems with this. However now that I am signed in on my new account, every time I open Calendar I receive the following two error messages:
"Couldn't move your calendars to iCloud because an error occurred.
Make sure you're connected to the Internet, and then try again."
"The server responded with an error.
Access to account "iCloud" is not permitted.
The server responded:
"403"
to operation
CalDAVMigrateToServerQueueableOperation."
Note that with regards to the first one I am definitely connected to the internet. I have tried restarting my Macbook, have tried enabling/disabling Calendar in iCloud, nothing has worked. I always get these error messages. I have two options, "Try Again Now" or "Try Again Later", for the first message and "Try Again" or "OK" for the second. Pressing anything just results in the error messages just coming up again in a cyclic manner, after briefly trying to "Move calendars to server account". Sometimes a pop up also appears where it says "Upgrading calendars" with a progress bar but this freezes/never goes anywhere, and regardless of the outcome, I cannot access my information in Calendar. Note that behind these error messages etc I can see my events in Calendar but I cannot access the detailed information contained within them nor can I add any new information or essentially do anything in Calender. Sometimes Calendar crashes and I get a crash report.
Sorry for this dense block of information but I have no idea what's going on so I'm just trying to give a clear account of the problems I'm facing. I really hope someone will be able to help me with this and I thank you in advance.
Sam

Don't worry I've sorted it! I just had to turn off Reminders as well in iCloud. Calendar then worked fine, even when I turned Calendar and Reminders back on.

ICloud WINDOWS 7 64 Bit sync problem with calendar of Outlook 2010

I am using
iPhone 4S (IOS5)
iPad 1 (IOS5)
PC (WINDOS 7 SR1 32 bit, Cor-2-duo) & Outlook 2010, 32 bit, at home
PC (WINDOWS 7 SR1 64 bit, Intel i7) & Outlook 2010 version 14.0.6106.5005 (32-Bit), in my office
together with iCoud for syncing my contacts (about 500) and calenders (2 calenders, about 3.000 and 8.000 entries) with Outlook 2010
The syncing works perfect for 1., 2. an 3., but I have severe problems with the 64bit PC:
The iCloud operating pannel is only displayed after a fresh reset of the system. Two processes are running (iCloud.exe*32, iCloudServices.exe *32), the iCloud icon on the task bar is displayed. Opening of the iCloud operating pannel fails by all means ( via icon, via network->icloud) etc. after Outlook 2010 has started once.
After closing Outlook, a restart of Outlook is perfored but displays "loading data" till infinity. The task manager is required to shut down Outlook.
After a fresh reset outlook starts (normal behavior) and displays the contacts (complete) and both calendars, but has only downloaded during set-up only about 7.000 entries of the 11.000 entries which are still displayed in the calendar of the web interface of iCloud and are displayed nicely on iPhone, iPad and the 32bit PC. The sync of new calendar entries works perfect between all four systems.
I have removed and reinstalled the iCloud operating panel sereal times, checked the Outlook pst file for errors -> no success.
Any suggestions how to overcome this problem?

I had a similar problem back lst year with MobileMe and outlook. I had to uninstall outlook and MM control panel completely then reinstal MM THEN Outlook and then MM would download all 5 of my MM calendars into Outlook including all events
do they stop at a certain date i remember seeing an option somewhere that specified how far back to sync appointments

Problem with database control returning multiple rows as Array using Oracle

Has anybody using Oracle gotten a Database control that
returns multiple rows to work returning an array?
The only way I can seem to return multiple rows is by returning
a RowSet. Returning an array gives me a NullPointerException
(when called within a pageFlow). When calling a database control
that returns an array from a web service I get a
"java.sql.SQLException: ResultSet has no more data." error.
The samples using the pointbase database seem to work, but when I
converted the CustomerDBClient web service to use Oracle, it starts
failing on calling the database control that returns an array
with: "java.sql.SQLException: ResultSet has no more data."
Has anybody gotten this to work using Oracle?
I'm also having some problem returning an Iterator. It seems
to work when called from a web service, but returns nothing
if called from a page flow.
I'm using Oracle 8.1.7 and WebLogic 8.1.
Eric

Do you need a particular service pack installed to return an array of custom object?
I am getting a ResultSet contained no data error when trying.
Thanks,
-Thomas
"Robin Karlin" <[email protected]> wrote:
>
Eddie O'Neil <[email protected]> wrote:
All--
Unfortunately, returning an Iterator to a JPF (or JSP) from a
database control is broken in WLW 8.1, though it will work inside of
a
JWS or JCS.
There shouldn't be a problem with returning an array of objects out
of Oracle to the JPF, and if you need an Iterator specifically, youcan
wrap the array in an Iterator implementation.
Sorry for the inconvenience.
Eddie
Lenny wrote:
I have gotten it to work on Oracle using Array:)
However, I haven't gotten it to work on Oracle using Iterator:( Itis so
simple, but doesn't work:(
"Eric Dokken" <[email protected]> wrote in message
news:[email protected]...
Has anybody using Oracle gotten a Database control that
returns multiple rows to work returning an array?
The only way I can seem to return multiple rows is by returning
a RowSet. Returning an array gives me a NullPointerException
(when called within a pageFlow). When calling a database control
that returns an array from a web service I get a
"java.sql.SQLException: ResultSet has no more data." error.
The samples using the pointbase database seem to work, but when I
converted the CustomerDBClient web service to use Oracle, it starts
failing on calling the database control that returns an array
with: "java.sql.SQLException: ResultSet has no more data."
Has anybody gotten this to work using Oracle?
I'm also having some problem returning an Iterator. It seems
to work when called from a web service, but returns nothing
if called from a page flow.
I'm using Oracle 8.1.7 and WebLogic 8.1.
Eric
I get the same error that Eric reported when trying to return an Array
of objects.
It is really frustrating because I can't use much of the built-in control
logic
that WLW provides. All I did was create a data pool for Oracle and a
datasource.
I modified the sample app in C:\bea81\weblogic81\samples\workshop\SamplesApp\WebApp\callJavaControl
to point to that datasource and I get the error that Eric reports above.
Can
anyone help me out????
Thanks,
Robin

Problem with calendar control in report preview

Similar Messages

Maybe you are looking for