Problem with call function close_form

Hello ,
I have a problem with function module close_form.I dont know if I am doing something wrong but please help me.
the issue is
declarations:
data: gt_itcpp type table of itcpp,
         gt_otfdat type table of itcoo.
CALL FUNCTION 'CLOSE_FORM
EXPORTING
   RESULT = gt_itcpp
TABLES
   otfdata = gt_otfdat
EXCEPTIONS
   OTHERS = 1.
DUMP: FUNCTION PARAMETER RESULT IS UNKNOWN.
THANKS

My point was that there are actually two problems with the original code: the one that you pointed out and the one that abapuser pointed out.
Although both were very helpful individually, I don't think either one actually solved the problem.
It would be misleading to anyone searching the forum looking for posts that solved a problem similar to theirs and only implemented half the solution.
In fact abapuser's answer is the one that answers the question that was actually asked.
Rob

Similar Messages

Problem with 'GetType' Function calling in MSVC++

Hello
I have problem with the function in TestStand API .
When I call the function " GetType " with the following statements in
a DLL called from TestStand (NI) implemented in MS VC ++
, it does not work and this exception is caught by the ONLY ' try catch ' block
to catch exceptions in TestStand API giving the error message
" Unexpected operating system error".
VARIANT_BOOL ok;
VARIANT_BOOL hi;
BSTR Name;
PropertyObject *property = (*step_)->AsPropertyObject();
( *step_ is a STEP Object of type Step* *step_ )
property = property->GetPropertyObject( "TS.SData", 0);
enum TS:ropertyValueTypes i = property->GetType( "" , 0 , &hi , &ok
, &Name);//Problem
Please solve my problem.
You can email me at [email protected]
Thankyou very much.
Best regards
Fahad Ejaz

Hello,
The problem is that the Name is not initialized (the BSTR is defined as OLECHAR*). Thus, replace the
BSTR Name;
declaration with the following lines:
char buf[1024];
BSTR Name = _bstr_t(buf);
This should solve the problem.
Best Regards,
Silvius
Silvius Iancu

Problem with Call Transaction opt-RACOMMIT = 'X'.

Hello Experts
I am having a problem with call transction. I am calling a Z transaction in function module. Within the Z transaction I am furhter calling some function modules and doing commit work and then some more processing after the comit work inside So to make sure the code after comit work is fired I am using opt-RACOMMIT = 'X' in call transaction. Whenever I set this parameter opt-RACOMMIT = 'X' call transaction fails and gives error saying No batch Input data for screen XXXX. However the Z tcode processed succesfully.
By changing the Mode to E i found that it remians at the last screen of call transction after executing the Z transaction and never comes back
But if I donot use RACOMMIT = 'X' everything is fine. Please let me know if anyone came across such problem. Any help will be apreciated.
Thanks,
kamal

Hello,
as you said, if there is more than commit statement in your ztransaction, then you should put RACOMMIT to 'X'.
I think the problem is in your bdcdata: change it to be sure to get back to the 1st screen of your ztransaction. Then, at this point (1st screen) hit "back" button.
Cordialement,
Chaouki

Problem with calling onApplicationStart() method

Hi all,
     I have a problem with calling application.cfc's methods from coldfusion template. The problem is like when i am calling "onapplicationstart" method inside a cfml template i getting the error shown below
The onApplicationStart method was not found.
Either there are no methods with the specified method name and argument types or the onApplicationStart method is overloaded with argument types that ColdFusion cannot decipher reliably. ColdFusion found 0 methods that match the provided arguments. If this is a Java object and you verified that the method exists, use the javacast function to reduce ambiguity.
My code is like below.
Application.cfc
<cfcomponent hint="control application" output="false">
<cfscript>
this.name="startest";
this.applicationtimeout = createtimespan(0,2,0,0);
this.sessionmanagement = True;
this.sessionTimeout = createtimespan(0,0,5,0);
</cfscript>
<cffunction name="onApplicationStart" returnType="boolean">
    <cfset application.myvar = "saurav">
<cfset application.newvar ="saurav2">
    <cfreturn true>
</cffunction>
</cfcomponent>
testpage.cfm
<cfset variables.onApplicationStart()>
I have tried to call the above method in different way also like
1--- <cfset onApplicationStart()>
i got error like this
Variable ONAPPLICATIONSTART is undefined.
2---<cfset Application.onApplicationStart()>
The onApplicationStart method was not found.
Either there are no methods with the specified method name and argument types or the onApplicationStart method is overloaded with argument types that ColdFusion cannot decipher reliably. ColdFusion found 0 methods that match the provided arguments. If this is a Java object and you verified that the method exists, use the javacast function to reduce ambiguity
Please help me out.
Thanks
Saurav

You can't just call methods in a CFC without a reference to that CFC. This includes methods in Application.cfc.
What are you trying to do, exactly, anyway? You'd probably be better served by placing a call to onApplicationStart within onRequestStart in Application.cfc, if your goal is to refresh the application based on some condition:
<cffunction name="onRequestStart">
     <cfif someCondition>
          <cfset onApplicationStart()>
     </cfif>
</cffunction>
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/

Problem with CONTAINS function

Hi all!!
i got a problem with contains function. i'm running oracle 11g.
if i execute this query:
SELECT x.lid as id, x.sztitular as titular, e.szname as proName, x.szresumen as resumen, b.sztitle as catName,
f.szname as secName, d.szname as cliName, x.datecreation as datecreation
FROM CPR_PRACTICAL_CASE x,ctg_category b, CPR_CLIENT d, pro_product e, CAT_SECTOR f, CPR_PCASE_PRODUCT g, CPR_PCASE_SECTOR h,
PRO_PRODUCTCATEGORY i WHERE x.lid = g.lpcaseid and e.lid = g.lproductid and x.lid = h.lpcaseid
and f.lid = h.lsectorid and x.lclientid = d.lid and i.lproductid = e.lid and b.lid = i.lcategoryid
AND x.szlocale = 'es-ES' AND x.bavailable = '1'i get 1 row as result with the column sztitular = "rodillos de medidas"
if i only add one more sentece to that query:
AND CONTAINS( x.sztitular, 'rodillos',1) >0the query returns an empty set.. i really don't understand why because the term "rodillos" is present in the row's column called "sztitular"...
i've put an index on that column:
create index ITXT_TITULAR on CPR_PRACTICAL_CASE(sztitular) INDEXTYPE IS CTXSYS.CONTEXT;any help?
many thanks!!!!
Edited by: ElMazzaX on May 21, 2012 5:51 PM
Edited by: ElMazzaX on May 21, 2012 5:53 PM

How are you synchronising the index?
http://docs.oracle.com/cd/E11882_01/text.112/e24435/ind.htm#i1008452
Also see the Oracle Text forum:
Text

Problem with BAPI_SALESORDER_CHANGE function module

I know lot of posts have been done about problems with this function module. However I was not able to find the answer to my problem. Hence posting a new thread
I have the following code which changes the reason rejection (if required to 'ZF') and also updates the sales order quantity.
The code works absolutely fine as long as the PGI date of the order item is either today or in the future. However if the PGI date of the order item is in the past. I get an error in the t_return table with error type 'E' saying 'PGI date is in the past hence could not update the item'.
If I try to update the same order quantity in VA02 for the item with PGI date in the past it does so without any problem.
Can someone please suggest what the problem might be. Or if there is some other way I can update the quantity. (I dont want to use BDC)
FORM change_sales_order_item USING value(r_rtb_posnrs) TYPE zpsd_ztsdrtb_ro_track
                             CHANGING r_return TYPE type_t_bapiret2.
DATA: v_order_header_in TYPE bapisdh1,
v_order_header_inx TYPE bapisdh1x,
t_schedule_lines TYPE bapischdl OCCURS 0 WITH HEADER LINE,
t_schedule_linesx TYPE bapischdlx OCCURS 0 WITH HEADER LINE,
v_temp_rtb_vbeln TYPE vbeln,
v_temp_rtb_posnr TYPE posnr,
wa_old_rtb_posnrs TYPE ztsdrtb_ro_track,
t_item_in TYPE bapisditm OCCURS 0 WITH HEADER LINE,
t_item_inx TYPE bapisditmx OCCURS 0 WITH HEADER LINE,
v_rtb_old_vbeln TYPE zrtbvbeln,
v_rtb_old_posnr TYPE zrtbposnr,
v_ro_old_vbeln TYPE zrovbeln,
v_ro_old_posnr TYPE zroposnr,
v_rtb_count TYPE i,
v_next_row_index TYPE i,
v_update_order_flg TYPE char1, "Update the sales order flag
v_rtb_record_counter TYPE i,
v_original_vbeln TYPE vbeln,
t_bapiret TYPE STANDARD TABLE OF bapiret2.
FIELD-SYMBOLS: <wa_r_rtb_posnrs> TYPE ztsdrtb_ro_track,
                 <wa_r_rtb_posnr_next> TYPE ztsdrtb_ro_track.
CONSTANTS: c_updateflag TYPE bapisditmx-updateflag VALUE 'U'.
v_order_header_inx-updateflag = 'U'.
Get rid of the duplicate records for the same RTB order. Just use
the last record quantity in the internal table
LOOP AT r_rtb_posnrs ASSIGNING <wa_r_rtb_posnrs>.
    v_rtb_record_counter = v_rtb_record_counter + 1.
    <wa_r_rtb_posnrs>-seqnr = v_rtb_record_counter.
ENDLOOP.
SORT r_rtb_posnrs DESCENDING BY zrtbvbeln zrtbposnr seqnr zrtbconsumedflg.
DELETE ADJACENT DUPLICATES FROM r_rtb_posnrs COMPARING zrtbvbeln zrtbposnr.
DESCRIBE TABLE r_rtb_posnrs LINES v_rtb_count.
v_rtb_record_counter = 0.
v_update_order_flg = space.
LOOP AT r_rtb_posnrs ASSIGNING <wa_r_rtb_posnrs>.
    v_rtb_record_counter = v_rtb_record_counter + 1.
    v_update_order_flg = space.
Popluate the item quantity update flags for schedule lines
    t_schedule_linesx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
    t_schedule_linesx-sched_line = '0001'.
    t_schedule_linesx-updateflag = c_updateflag.
    t_schedule_linesx-req_qty = 'X'.
    APPEND t_schedule_linesx.
    CLEAR t_schedule_linesx.
*Item (Order QQuantity Field to be changed "KWMENG")
    t_schedule_lines-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
    t_schedule_lines-sched_line = '0001'.
    t_schedule_lines-req_qty = <wa_r_rtb_posnrs>-zrtbchgqty.
    APPEND t_schedule_lines.
    CLEAR t_schedule_lines.
If fully consumed then set the rejection flag
    IF <wa_r_rtb_posnrs>-zrtbconsumedflg = 'X'.
      t_item_inx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_inx-updateflag = 'X'.
      t_item_inx-reason_rej = 'X'.
      APPEND t_item_inx.
      CLEAR t_item_inx.
      t_item_in-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_in-reason_rej = 'ZF'.
      APPEND t_item_in.
      CLEAR t_item_in.
    ELSE.
      t_item_inx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_inx-updateflag = 'X'.
      t_item_inx-reason_rej = 'X'.
      APPEND t_item_inx.
      CLEAR t_item_inx.
      t_item_in-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_in-reason_rej = ' '.
      APPEND t_item_in.
      CLEAR t_item_in.
    ENDIF.
If you have reached the last line of the RTB intern table update the sales order
*Index pointing to the next row
    v_next_row_index = v_rtb_record_counter + 1.
    IF v_rtb_record_counter = v_rtb_count.
      v_update_order_flg = 'X'.
    ELSEIF v_rtb_record_counter < v_rtb_count.
Get the next row data
      READ TABLE r_rtb_posnrs INDEX v_next_row_index ASSIGNING <wa_r_rtb_posnr_next>.
      IF sy-subrc = 0.
        IF <wa_r_rtb_posnrs>-zrtbvbeln <> <wa_r_rtb_posnr_next>-zrtbvbeln.
          v_update_order_flg = 'X'.
        ENDIF.
      ENDIF.
    ELSE.
      v_update_order_flg = space.
    ENDIF.
update the rtb orders with quantities and the rejection flag (if required)
    IF v_update_order_flg = 'X'.
      CALL FUNCTION 'BAPI_SALESORDER_CHANGE' STARTING NEW TASK 'SOUPDATE'
        PERFORMING callbk_bapi_salesorder_change ON END OF TASK
        EXPORTING
          salesdocument    = <wa_r_rtb_posnrs>-zrtbvbeln
          order_header_in = v_order_header_in
          order_header_inx = v_order_header_inx
        TABLES
          return           = t_return
          schedule_lines   = t_schedule_lines
          schedule_linesx = t_schedule_linesx
          order_item_in    = t_item_in
          order_item_inx   = t_item_inx.
      WAIT UNTIL t_return[] IS NOT INITIAL.
      READ TABLE t_return INTO wa_return WITH KEY type = 'E'.
      IF sy-subrc <> 0.
      ELSE.
        r_return[] = t_return[].
        MESSAGE ID 'ZSD' TYPE 'E' NUMBER 613.
       RAISE errorinorderupdate.
      ENDIF.
      REFRESH t_schedule_linesx.
      REFRESH t_schedule_lines.
      REFRESH t_item_in.
      REFRESH t_item_inx.
      REFRESH t_return.
    ENDIF.
ENDLOOP.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
   IMPORTING
     return = t_bapiret.
ENDFORM.                    "Change_Sales_Order

see the following example and try to do this:
i_hdrx-updateflag = 'U'.
*" Fill required SCHEDULE_LINES data.
i_sched-itm_number = p_posnr.
i_sched-sched_line = p_etenr.
i_sched-req_qty = p_reqqty.
i_schedx-updateflag = 'U'.
i_schedx-itm_number = p_posnr.
i_schedx-sched_line = p_etenr.
i_schedx-req_qty = 'X'.
APPEND i_sched.
APPEND i_schedx.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
salesdocument = p_vbeln
order_header_in = i_hdr
order_header_inx = i_hdrx
TABLES
return = i_ret
schedule_lines = i_sched
schedule_linesx = i_schedx.

Problem with calling on some numbers

Hi my mum has problem with calling on my number. She is in the USA and has a lof of money on her Skype account. When she was in Poland (country when I am now) she could without any troubles calling on my number. What is wird now in the USA she can call on some other polish numbers (I think that Skype doesn't support connection with my mobile operator).
I fell deceived because I created Skype account and transfered some money on it for my mum to give her possibility to call to me. Is possible to fix it? Is somewhere table with can help me check which one numbers (mobile operators) Skype supports in the USA?
My mom used Skype from Android smartphone.

Hi my mum has problem with calling on my number. She is in the USA and has a lof of money on her Skype account. When she was in Poland (country when I am now) she could without any troubles calling on my number. What is wird now in the USA she can call on some other polish numbers (I think that Skype doesn't support connection with my mobile operator).
I fell deceived because I created Skype account and transfered some money on it for my mum to give her possibility to call to me. Is possible to fix it? Is somewhere table with can help me check which one numbers (mobile operators) Skype supports in the USA?
My mom used Skype from Android smartphone.

Problem with call forwarding. Calls can not be forwarded for incoming external calls

Hi Everybody, how are you?
I have a problem with call forwarding. Everything was fine but now is not working.
In the reception of an office, the receptionist activate the call forward option to an internal extension. If somebody, internal in the office, call to the reception, the call is forwarding to the extension configured. But if I call from the outside (in example, from my cellphone) the call is not forwarded to the extension configured and continue ringing in the reception phone. Why this behavior? Any idea?
If you know something please tell me.
Thanks. Best regards.
Andres Collazos.

I encounter a similar problem with 9.1.1.
My problem is link to this bug ID : CSCtq10477.
Mathieu

My sister had a problem with call volume being too low on the iPhone 5S. Is the iPhone 6 louder? Is anyone else feeling that call volume on iPhone 5S isn't loud enough?

My sister had a problem with call volume being too low on the iPhone 5S. Is the iPhone 6 louder? Is anyone else feeling that call volume on iPhone 5S isn't loud enough?

I personally haven't experienced much of the "reverberation/feedback" when using a headset on the i4S...
Yes, I have near-perfect hearing too (for scope, squeaky brakes hurt my ears) I come from many conversations on many phones and types and first off, CDMA technology is great for coverage, terrible for voice quality. HD Voice in Europe made for some of the best phone conversations I've ever had.
Back on track, feedback is most noticable (similar to the landline phone) when using the iPhone without a headset, but for me it's not an absolute criticality mainly because I use VoIP apps alot, so maybe it has desensitized me some over the past year.
But whenever I'm on a call, and the other person has me on speakerphone, I have alot of trouble talking because of the feedback loop caused. So the less of my voice I hear the better I can talk.
Have you tried a bluetooth headset yet?

Error thread java : problem with the function "resume 0x***" (forum sun)

One problem with the function of jdb occured when I tried to use it to
pilot the processor with differents threads. In fact, I use a simple example with 2 threads.
I stop the two threads with two breakpoint, and I want to resume one or the other (with the function "resume 0x****"), the one wich I resumed stop again on the breackpoint and I decide again to resume one or the other. All of that to obtain a tree of execution.
I give you the code of the class and the code of jdb.
CLASS: (it's just a object Room with a variable degre that I increment and decrement with two threads increase and decrease)
public class Test{
     public static void main(String[] args){
          Room r = new Room();
          decrease de = new decrease(r);
          increase in = new increase(r);
          de.start();
          in.start();
class Room {
     private volatile int degre=20;
     public void more(){
     degre += 4;
     public void less(){
     degre -= 3;
class decrease extends Thread{
private Room room;
public decrease(Room r){
          room =r;
public void run(){
try{
     while (!interrupted()){
          room.less();
catch(InterruptedException e) {}
class increase extends Thread{
private Room room;
public increase(Room r){
     room =r;
public void run(){
     try{
          while (!interrupted()){
               room.more();
catch(InterruptedException e) {}
JDB:
Initializing jdb ...
stop at Test:7Deferring breakpoint Test:7.
It will be set after the class is loaded.
runrun Test
Set uncaught java.lang.Throwable
Set deferred uncaught java.lang.Throwable
>
VM Started: Set deferred breakpoint Test:7
Breakpoint hit: "thread=main", Test.main(), line=7 bci=30
7 in.start();
main[1] stop at room:16
Set breakpoint room:16
main[1] stop at room:20
Set breakpoint room:20
main[1] resume
All threads resumed.
>
Breakpoint hit: "thread=Thread-0", room.less(), line=20 bci=0
20 degre -= 3;
Thread-0[1] threads
Group system:
(java.lang.ref.Reference$ReferenceHandler)0x10d Reference Handler cond. waiting
(java.lang.ref.Finalizer$FinalizerThread)0x10c Finalizer cond. waiting
(java.lang.Thread)0x10b Signal Dispatcher running
Group main:
(decrease)0x146 Thread-0 running (at breakpoint)
(increase)0x147 Thread-1 running (at breakpoint)
(java.lang.Thread)0x148 DestroyJavaVM running
Thread-0[1] resume 0x147
Thread-0[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] resume 0x147
Thread-1[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] print degre
degre = 24
Thread-1[1] resume 0x146 //It's here the problem, thread 0x146 have to stop on the //next breakpoint of decrease but nothing happen
Thread-1[1] resume 0x147
Thread-1[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] clear
Breakpoints set:
breakpoint Test:7
breakpoint room:16
breakpoint room:20
PS: I tried many other examples with other class and other kind of breakpoints, but, in any cases, on thread doesn't manage to resume. When I try with general resume (no specification of the thread), It works but it isn't interresting for me because I want to decide wich thread continue his execution.

Hi,
I have read the FAQ of the JMF.
The problem was the jar files of the JMF were not in the JRE\BIN\EXT
folder of the Java runtime!
now it works!
thanks
Reg

Performance problem with OLE_FLUSH_CALL function module

Hello Everyone,
I am facing problem with OLE_FLUSH_CALL function module (execution is taking long time which is going to be dump error).
Could you please help me in knowing solution for this problem?
Thanking you in advance.
Srinivas

Hi Srinivas,
the OLE_FLUSH_CALL does an RFC from ABAP backend to frontend UI. So high execution time could result from high network time, for example latency between UI and backend server.
How many UI interaction steps did you measure for the trace above? Ideally, there should only be one OLE_FLUSH_CALL per user interaction step. If its more, the application is not written in an optimized way.
Best Regards, Randolf

For users having problems with Mail functionality...

Hello! I have been having problems with Mail functionality as well, so, I took a few steps to see if I could solve the problem on my own.
My problems were:
Mail would freeze when sending mail, or, when I pressed quit, it would freeze.
If I toggled between inboxes too much it would freeze up.
Even after trying the many techniques others offered on this board, Mail still froze up. So.. here's what I did:
1.) Turn off the auto-retrieve mail function in the preferences/general menu. Set it to a manual check. Just check it yourself every once in awhile. It may not be as convenient, but it works, trust me.
2.) Under the fonts and colors menu, set all three fonts to the SAME font (mines Century Schoolbook, but anything works) and turn off fixed-width font. Sometimes mail has a tough time decoding and working with texts, and causes it to freeze.
3.) Clean our your main inbox! Place the emails that you want to keep, but don't need to be in your inbox in a new folder on your inbox bar (mines aptly named 'Saved Messages.' That way, when you open up Mail to your default account, it doesn't have 1,000+ messages to index. Also, try to keep the inboxes from having more than 100-200 messages per. It seems to frown on any more than that.
After trying these three easy, steps, restart mail and see if things run smoother. I have had no problems since these changes, and mail runs a ton better. Plus you don't have to worry about deleting your library/mail folder anymore. Let me know if things work out so I can see if my theory is a universally proven thing. Thanks and good luck!
iMac G5 20" Mac OS X (10.4.5)

Good question. I have worked very little with IMAP other than as a testing device, so, on a daily routine I cannot say how it would function. However, I can only expect that by having the option to download all emails for offline viewing selected, you are right in it being a lag creator. Another suggestion would be, if you are running a single-computer setup, to have the account delete emails from the server after recieving them on your computer. Thus, you reduce the risk of repeat downloads or unnecessary build-up on the server end. DO NOT select this option if you run multiple computer set ups on one AppleMail account system or you will cause some discrepancies and/or data loss from system to system. Or, if you have emails redirected from a seperate server to Mail (i.e. I redirect mail from my university email account into Mail so that I don't have to go to the web-mail site to check it--> just like Gmail or Yahoo etc etc) you won't be able to check them from the web-based email system if you have the system delete them. Ok that sounded confusing. Solution: have the system remove emails from the server after a week (or any period of time, just not immediately) so that, in the off-chance you need to use the online system, you will have access, and will give you a chance to check the emails on other systems without a threat of data corruption (by corruption i mean that frustrating feeling you get when you can't find that super important email that was in your inbox just 10 seconds ago on your desktop etc.)
I will see if I can learn anything more about IMAP Ernie. Its definitley the biggest problem source for Mail, POP and .Mac being simple and functional as long as you don't play with the settings too much. As far as the issue of Offline viewing goes, try turning it off and seeing how Mail functions.
BEFORE you turn it off, however, I recommend saving all of your emails in your inbox as a text file or something so, in case the server burps and has a brain flatuence, you don't lose anything. Been there, done that, thrown the books against the wall in a frustrated rage.
My only reserve about the Offline Viewing is whether or not Mail will, when you click "recieve mail," have to re-download the emails from the server each time. If so, then it may end up taking longer and lagging more. The issue here is obviously minimizing the amount of activity between Mail and the email server without jeapordizing information on the server or multiple Mail programs on the same account. When we can find that balance, I think Mail's potential will be realized. Keep the questions coming.

Lync 2013 I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second Anybody out there having similar problems with call pickup Groups?

HI
I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second
Anybody out there having similar problems with call pickup Groups?

Hi,
Did you meet any other call delay when you using Lync?
As the issue happen for Lync desktop client, it can be performance issue. Please check if there is any error message from FE Server when the issue happen.
Also please check if you have updated Lync Server to the latest version, if not, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Incorrect parameter with CALL FUNCTION - WE19

hi! All
while creating IDOC through WE19 - Start Inbound it creates IDOC with Status - 64."IDoc ready to be transferred to application" "No filters , No conversion , No version change ."
Incorrect parameter with CALL FUNCTION
This parameter was "MASSAVEINFOS".
but i have Included this parameter in my Function module.
INPUT_METHOD TYPE INPUTMETHD
MASS_PROCESSING TYPE MASS_PROC
NO_APPLICATION_LOG LIKE SY-DATAR
MASSAVEINFOS LIKE MASSSAVINF
whats the mistake i have done.
Regards
Kv

That will not be possible KV, as the call to the FM is not being made, as far as i see you have completed the needed settings.
As i do not have access to an SAP system, i suggest that you try below,
1) Go to WE19, enter the IDOC number and F8.
2) In this screen, click on Inbound function module.
3) In the field for inbound function module press F4, it should list your FM name here if all the necessary we42/82/57, BD51 and WE20 have been done correctly.
Another thing that you can try is, on WE19,
1) Idoc Number F8
2) /h - to start Debug
3) Now click on Standard inbound, in the debug mode press F5 once.
4) Now put a break point on all message statement
See where exactly the message of wrong FM is being thrown, it will most probably be after a select statement on one of the tables associated with WE42/82/57/BD51 etc. With this you will where you have missed out.
All the best !!!
Regards,
Chen
Edited by: Chen K V on Mar 18, 2010 8:55 AM

Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

Tell Apple about it: http://www.apple.com/feedback/iphone.html
Be sure to give as much detail as possible.
I would also check LG's site.

Problem with call function close_form

Similar Messages

Maybe you are looking for