Problem with Call Screen and Leave Screen !

Hi,
I am calling Modal screen (Dialog Pop up screen) from my first screen by 'Leave to Screen 'nbr' ' then once user enter the value in the pop up screen then I haveto display value with TABLE in Final screen as 'Normal screen' here I am using LEAVE to SCREEN, but after this call - my new final screen is not displaying as noraml screen it also displaying like 'Modal Screen' Like big pop scrren.!!
When I tried final CALL by using CALL SCREEN instead of LEAVE screen the final screen with table is dispalying fine as Normal screen but its returning control to pop-up screen which I dont want.
I like Screen flow as 1>2>3--->1
Help me to solve this Problem.
Regards
James

Hi,
Check the below thread,
Unable to close Modal dialog box
1) 1st screen--> 2nd screen --> Use CALL SCREEN.(This is Modal Screen)
2) 2nd Screen-->(ModalScreen so you need come back) use the above thread
3) Still on 1st screen--> Use CALL SCREEN --> To 3rd Screen
4) 3rd Screen back to First Screen -> use LEAVE TO SCREEN First_Screen_NO.
Cheerz
Ram

Similar Messages

Problem with remote desktop and lock screen

I know of the easy way to immediately lock a Mac's screen by clicking the menu bar lock icon from KeychainAccess. This works on every system under my control (rMBP running Mavericks, MacMini with 10.5 and Mavericks). However when I control the Macs via Remote Desktop (currently 3.7.2), that lock icon behaviour changes.
Trying to lock a 10.5 system, the screen inside the Remote Desktop window goes black immediately. Moving the mouse activates the password dialog. That is what I want. Doing the same in a remote Mavericks system, the screen goes to a dark blackish semi-transparent state. Moving the mouse immediately restores the normal desktop view, no password asked. Is this a feature or a bug in Remote Desktop? This change in behaviour must have come in around Lion or Mountain Lion.
---markus---

Hi
Do you use the Intel Proset Utility to configurate the WLan connection?
Try to configure the WLan using this tool and check if the Wlan would disconnect again.
Im also interesting what Wlan driver did you use?
Did you use one from the Intel page?
If not, check the Intel page for the newest WLan driver version.

Problems with Yosemite (reboot and choppy screen image)

I recently upgraded to Yosemite. I have a MacBook Pro Retina 15" and am running 10.10.2
In all my years of using OSX I think I have been forced to do a hard restart MAYBE 6 times. Ever. And I've been here from the beginning of OSX and before. Since updating maybe two or three weeks ago I have had to hard restart about a dozen times. I am disappointed. The computer becomes non-responsive, yet I don't see the spinning beachball. It just - freezes. I hold down the power button and chug along until the next time.
Additionally, occasionally when using safari the screen gets kind of separated. For instance, if I click on something to go to a new page, part of the screen remains on the old screen and sort of flashes back and forth from old screen to new screen. IDK if that makes any sense. I've not been able to figure a pattern as of yet.
I'd like to know if anyone else is experiencing such oddities. Also, if anyone has any idea what I can do about these problems I'd be happy to entertain them.

You can also try the Safe Mode to reset things.
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite

Problem with call transaction and a query

Hi,
Whe have a query that has its own Z tcode, we are working with this "EXIT_SAPLCORF_103" within the tcode CO11N. Inside the include "ZXCOFU13" we call the query Tcode and it is displayed on screen but with no data.
The table "itbdcdata" record well the data of the inputs in the query recording so you can see with the WERKS and the number of reserve (3994) in the recording.
Why the call transaction display the query screen with no data...? and how can i pass the inputs to the query screen so it be executed.
Thanks on advance.
David Fúnez
Tegucigalpa, Honduras.
This is the recording:
AQZZZ_USER_GRMA=Z_QUERY_PP_003     1000X                                                                                BDC_CURSOR     SP$00002-LOW
                                                            BDC_OKCODE     =CRET
                                                            S_WERKS-LOW     1202
                                                            SP$00002-LOW           3994
                                                            %ALV     X
this is the code in the INCLUDE
*& Include           ZXCOFU13
DATA: itbdcdata TYPE bdcdata    OCCURS 0 WITH HEADER LINE,
      optoption TYPE ctu_params.
REFRESH itbdcdata.
CLEAR   itbdcdata.
itbdcdata-program = 'AQZZZ_USER_GRMA=Z_QUERY_PP_003'.
itbdcdata-dynpro   = '1000'.
itbdcdata-dynbegin = 'X'.
APPEND itbdcdata.
itbdcdata-fnam = 'BDC_CURSOR'.
itbdcdata-fval = 'SP$00002-LOW'.
APPEND itbdcdata.
itbdcdata-fnam = 'BDC_OKCODE'.
itbdcdata-fval = '=CRET'.
APPEND itbdcdata.
itbdcdata-fnam = 'S_WERKS-LOW'.
itbdcdata-fval = '1202'.
APPEND itbdcdata.
itbdcdata-fnam = 'SP$00002-LOW'.
itbdcdata-fval = caufvd_imp-rsnum.
APPEND itbdcdata.
itbdcdata-fnam = '%ALV'.
itbdcdata-fval = 'X'.
APPEND itbdcdata.
CLEAR optoption.
optoption-dismode = 'A'. "A is visible
optoption-updmode = 'S'.
CALL TRANSACTION 'ZRESV' USING itbdcdata OPTIONS FROM optoption.

problem solved.

Problem with call forwarding and "call divert"

I have been receiving calls lately and a dialogue box pops up and says "fowarded call" with a button that says "dismiss" - I'm not sure why or how to disable this. in my settings I have call forwarding turned off. Also when I make calls I sometimes see messages saying something about call forwarding active or active diverts. Again I have call forwarding turned off and I see no settings for divert. How can I fix this?
Thanks.

i am having a similar problem. I have a Pearl 8100 with T-Mobile. I've had it for almost two years (since Jan. '07). About four weeks ago, this problem started. I have a landline office phone through AT&T, and when I leave the office, I forward this land line to my Pearl. When someone calls my office after hours, on nights and weekends, the problem is that instead of the person's name and phone number showing up on my caller ID, my Pearl shows that I am calling myself from my own cell phone! I don't get "Private Number" like you get, the caller ID shows that I am calling myself!
I've spent six or seven hours with T-Mobile tech support, with five different tech people over a period of several days and several phone calls, and they can't figure it out; their final and "best" answer is that it's a blackberry problem, that the issue has been addressed and identified as a "known issue" and a "trouble ticket" has been created. I contacted RIM and they directed me to their archived troubleshooting and to this forum, so I still don't have an answer. And T-M had no answer when I told them that this feature worked just fine from Jan. '07 through Aug. '08. T-Mobile offered to put me into a different device, the T-Mobile wing, which by fair assessment, looks like a piece of junk, and it's window's mobile, which is even worse. I rejected this option.
I'm hoping someone can solve this. One friend of mine thought that it's a network issue, any issue with caller ID would be with the network, not the phone or its software...this makes some sense to me...and one of the techs at TM thought that this could be the issue as well. As T-M upgrades its networks to 3G, these bugs are popping out. who knows, I'm sticking with this Pearl and 8100 for a little while longer, b/c I am waiting to see if an answer shows up somewhere on one of the forums, but I hate not knowing who's calling before I answer the phone!

Problem with call log and email signature...

Hi, I have 2 little problem with my BB
First, the day won't appear in the call logs. It only displays the month like 08/dd.
Pic 1
Second, when I send emails, my signature gets all mixed up because of my french punctuation, any idea why ?
Pic 2
Message Edited by Jerg on 08-09-2009 11:29 AM
Message Edited by Jerg on 08-09-2009 11:31 AM

Wow, that's REALLY low. That number means there's only 6MB free. It's recommended to have AT LEAST 15MB free. Check under Options | Status, hit the menu button, then choose Database Sizes. What number is listed for Total Size at the top?
If the Content Store is really big then that means all of the media files (pictures, videos, etc) are being saved in the device memory rather than on a media card. Does your boss have a media card to store the media on?
Did you also change the Keep Appointments setting to something lower like you did with the Keep Messages setting?
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

3 problems With: Accelometer, Safari, And Home Screen Sliding, Update??

Hey Guys, i just got a 16GB iPhone today, and i noticed that sliding from one home screen to the other is like 1/8 slower than other iphones i tried, its a small fraction, but i want to enjoy my iphone to the fullest.
The second problem is concerning the accelometer, sometimes it takes about 10 seconds for it to change landscapes, and when it actually works right, its moves not in the same smooth way ive tried on other iphones too.
The final problem is concerning safari browser, whenever i have 3 pages or more, sometimes it closes by its own, and there's that accelometer problem again, screen changes differently every time.
I absloutly love it, no doubt about that, but i really want to enjoy it to the fullest, without any problems, so what do you think guys, should i update to 1.1.4, or is it all in my head??
Thanks for any help you give
Godfather

Thanks for the info Kevin, next time I reset I will clear the cache too and see if it works better for me than just the reset.
Also to the OP. Like Kevin said, the iphone must be nearly totally vertical for the accelerometer to register the change quickly. I was just testing and if I was holding the phone on a slant towards being horizontal and then rotate into landscape it takes several seconds to rotate. If I hold it vertical and then rotate its nearly instant. If you lay down on a table and then rotate it doesn't move at all.
I'm not sure why your settings screen would be lagging. Make sure your finger movements are smooth I suppose. And also safari will lag in doing anything while it is actively loading data from the net.
Edit - with further investigation it looks like it needs to be no more than at a 45 degree angel from vertical position for the accelerometer to pick up the change in orientation.
Message was edited by: Randy Fast

Problem with CALL TRANSACTION SKIP FIRST SCREEN

Hi Experts,
I am having a functionality where in if i click the hotspot i go the specified transaction..I am able to do that using --
CALL TRANSACTION 'CAA3' AND SKIP FIRST SCREEN
Now if i press the back button on the standard transaction i am coming to the first screen of the CAA3 transaction..
Can i come back to my original ALV display instead of coming to the first screen of the CAA3 transaction which i have skipped while going there..
I have searched in all forums. But i couldn't get the proper solution.
Please Help me !!!
Regards,
Rajesh

Hi friends,
What do you think the results?
I used alv hotspot.
FORM user USING r_ucomm LIKE sy-ucomm rs_selfield
                          TYPE slis_selfield .
   READ TABLE gt_alv INTO gs_alv INDEX rs_selfield-tabindex.
   IF rs_selfield-fieldname EQ 'BELGE'.
     SET PARAMETER ID '80B' FIELD gs_alv-belge.
     CALL TRANSACTION 'FPE3' AND SKIP FIRST SCREEN.
   ELSEIF rs_selfield-fieldname EQ 'GPART'.
     SET PARAMETER ID 'BPA' FIELD gs_alv-gpart.
     CALL TRANSACTION 'FPP3' AND SKIP FIRST SCREEN.
   ELSEIF rs_selfield-fieldname EQ 'VKONT'.
     SET PARAMETER ID 'KT0' FIELD gs_alv-vkont.
     CALL TRANSACTION 'CAA3' AND SKIP FIRST SCREEN.
   ENDIF.
FPE3 and FPP3 is running. But CAA3 is incorrect.
is the correct answer enhancement ?

Problem with AE CS5 and laptop screen resolution during install..

Hello everyone,
I bought AE and I am very disappointed. When I went to install the application, I got the following errors and it stopped installing.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 54 error(s), 52 warning(s)
WARNING: Display requirements not met for {DA1B174B-4297-467C-9EF8-0AB8D4D5171E}
WARNING: Payload cannot be installed due to dependent operation failure
My max screen resolution is 1366x768 and the requirement is 1280x1024.
I don't plan on buying a screen that large. Is there a fix for this? perhaps editing the registry? I won't mind the small work area. I can manage. does AE CS4 have this resolution requirement? I have an opengl capable graphics card in my laptop so I don't think that is an issue here. any help would be much appreciated. thanks

ok I think I was able to bypass the " Display requirements not met for {DA1B174B-4297-467C-9EF8-0AB8D4D5171E}" error during install. I hooked up an exteral monitor with the required resolution and I did not see that error message again. However, I am still getting the following error messages
<code>
WARNING: Payload cannot be installed due to dependent operation failure
</code>
could it be that my graphics card does not support opengl? how can I make sure it supports opengl 2.0?
the graphics card that I have is an integraded intel media graphics accelerator. I am quite sure it would support opengl2.0. any thoughts? thanks
My brother has a screen resolution of 1240x780 and yet he was able to install AE CS5 without any errors at all. He has an ATI mobility Raedon Graphics card. whats up with that? also, he cannot hear any sound from avi videos in AE. He has tried everything even raising the decibals level in the track.

Having a problem with ilife 08 and leopard screen saver

Hi,
Not sure if this is an osx leopard issue or a ilife 08 issue but before I did the upgrade I was able to use my entire iphoto library as random photos in the screensaver. Not it only let's me choose specific events or last import. it does not let me select the entire iphoto library?
Any ideas on this?

In System Preferences/Screen Saver, you need to go down the list past all the Events and you will see a listing titled "Photos" just above the item titled "Last 12 Months". Select it and you will see the entire iPhoto Library there.
Message was edited by: Anastassios T
Message was edited by: Anastassios T

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board.

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board. How much will a new battery and motherboard cost and would it be worth it or should I just get a new computer. It was about 300 dollars to get it serviced last week. if it adds up to much past 600 dollars I will just get a new one. THANKS FOR ANY HELP!
P.S During classes today it began beeping in my bag. Like three kind of long steady beeps then a short pause, and when I opened it I couldn't see anything but it was on so I turned it off and back on.

Depends on what options your Apple store offers - if they can do a depot repair (where they send it out), that's around $300 for all parts & labor.
If the store doesn't have that option, a logicboard is around $600, battery $80-$100, from what I've seen.
If they JUST replaced the logicboard, you absolutely should NOT have to pay for another replacement - the replacement is covered by a warranty. If they want you to pay for it, make sure you have a copy of the receipt for the work that was recently completed so you can show it to them. They have no reason to charge you for another logicboard.
~Lyssa

Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

Call screen and set screen

hi experts ,
whts the practical diff b/.w call screen and set screen in module pool?

Call Screen: Calling a single screen can be used for embedding a screen sequence. If you want to prevent the called screen from covering the current screen completely (say u want 2 display both screen) you can use the CALL SCREEN statement with the STARTING AT and ENDING AT
CALL SCREEN 500
If we write this statement in screen 100 ,it will goto screen 500 and it will retain screen 100(ie u can come back)
and moreover u have options using this
CALL SCREEN 200 STARTING AT x1 y1 ENDING AT x2 y2
If we use set screen first the processing blocks in the present screen will be executed and control goes to the screen which is called.
in this control remains in that calling screen only, it doesnt come back to our screen.
In screen 100,we call screen 500.The PBO and PAI of screen 500 is processed.Now in screen 500,if we use leave to screen 100,the processing starts from screen 100 after the call screen 500 statement.The PBO and the PAI of screen 100 need not be processed again from the beginning in this case.
That is if we use leave to screen,the control goes back to the screen from which the present screen was called and continues with the processing.
SET SCREEN 500
With the above statement , it will goto screen 500 and screen 100 no more remains
Screen No 0 : This special screen number causes the screen to jump back to the calling screen.
set screen 0 used to go back to the previous screen.
Reward All Helpfull answers

Problems with pricing in Internet Order screen(CRM E-Commerce 5.0)

Good afternoon !
        We are using CRM 5.0 with CRM E-Commerce 5.0, and we are experiencing problems with pricing in the order screen.
        When we create an order and insert one item at this order, this item is processed and the price is calculated and shown correctly, both in the item and in the table of totals at the right corner(where is the Total Net Price, freight value, etc).
        If we change the quantity of this item, or insert more one item(with the same or other product), the price turns to zero, both in the item(s) and in the table of totals mentioned above. Also, in the table of totals, the freight value remains being calculated, even in this cases when the prices is turned to zero.
        What can be happening in this case ? What can I check to determine the cause and solve this problem ?
        Thank you in advance !
        Wilson

Good afternoon !
        This problem was solved adjusting some parameters of partner determination.

Problem with InDesign CC redrawing the screen too slow while using Zoom tool

Hello. I got a problem with InDesign CC redrawing the screen too slow while using Zoom tool. Sometimes it takes more than a secong to zoom in or out. However InDesign CS6, Photoshop CC, Illustrator CC works just fine. What could be the problem, videocard or something else? Below is my PC configuration: OS Windows 8 Pro (x64); processor Intel Core i7 2600k CPU 3,40GHz; video adapter NVIDIA GeForse GTS 450; monitor NEC PA271W (2560x1440).

Yes it’s a bug. The trick is to select the tool and then left click the photo information strip and hold for a few seconds until you see the windows bar at the top of the screen (not responding)
The lasso tool should then work normally.

Problem with Call Screen and Leave Screen !

Similar Messages

Maybe you are looking for