Problem with calling message in EXIT_SAPML03T_001

Hi
I need call message id 'zwm' type 'W' number 018 in exit EXIT_SAPML03T_001.
Class exists, message too.
But when I double click on message (018) information occurs that message doesn't exist.
What should I do please help.
Best regards,
Greg.

Hi,
declare a constant and give value which u r maintaining in SE91,message class.zwm..and now instaed of goving the message from message class..try to give with constant./
message w001 with c_message..
Try it out if it works
Regards,
Nagaraj

Similar Messages

  • I have two Iphones with different email addresses sharing one Apple ID. Will that cause problems with using messaging and FaceTime?

    I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
    I would like to set up a new Apple Id for one of the phones and remove it from the old account.
    If I do that, can I move all of the purchased apps and songs to the new Apple account?
    Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?

    Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address).  While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
    Rather than do all that, don't fight it -- use separate IDs for iCloud.  You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account.

  • Problem with Nokia Messaging on my N97 (V22)

    Since afew weeks I have a strange problem with Nokia Messaging on my N97.
    I receive emails using Nokia Messaging (V10.2.26) with a date shown incorrect as 01.01.0000 and the email then can’t be opened/read.
    This happens either on 3G connection as well as WLAN and it seems to be by random, not only HTML-emails or emails with text only.
    I have uninstalled Nokia messaging already and reinstalled V10.1.24 but the problem still remains.
    Is there any idea how to fix this issue because it is quite annoying and I can’t use the full functionality of my cell phone?

    millic wrote:
    ceroberts75,  I remember from your other posts somehow server thinks you already have an account with the email you are trying to configure and you/nokia support is not able to get access to it. Different people have resolved this issue in different ways. For me it was just another way. Thought it might help someone.
    absolutely m8.  thats why i gave you a kudos.
    the challenge is that NM has been unruly as of late...and believe when i say that i have literally been on the phone teching nokias support up to tier 2 and creating, canceling, trying new acounts with different email, different ways of creating them, with wifi, gprs...and praying for hours accross mutliple phone calls
    but to no avail, are the devices we are using connecting and syncing...even with thier n900 specialist which i had to help him!   lmao. 
    another option for a solution is alwayhs welcome as there are more then one way to skin a cat.
    i hope it works for him and others as i kno9w thesome that are just giving up on it.

  • Problem with instant message in clustered environment

    Hello, I have some problem with Instant Message service.
    We need to use it in our Production Environment (a clustered emvironment with a central instance, two dialog instances and two web dispatchers), some months ago we tested it in Development Environment (not clustered emvironment, just a single system) and it worked fine.
    So I did the same configurations on Production Environment but it did not work.
    But if I access on my portal (Production Env.) by the central instance (avoiding the dispatchers) the instant message service works.
    I think it can be a web dispatcher's configuration problem, in its logs I found the message :
    "<i>[Thr 3700] *** ERROR => htmlEncode: called with empty string [icpif.cpp 847]</i>"
    I' ve repeated the same configuration done in Dev.Env. (no dispatcher) on the Prod.Env. (with 2 dispatcher), is possible that I'm missing some configurations??
    Could someone helps me?
    Best Regard
    null

    Hi Alessandro,
    unfortunately I got the same problem but I haven't found the solution yet.
    Hoping someone will help us.
    Regards  Nicola

  • Lync 2013 I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second Anybody out there having similar problems with call pickup Groups?

    HI
    I have a strange problem concerning  group call pickup  in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having  about 5-7 second
    Anybody out there having similar problems with call pickup Groups?

    Hi,
    Did you meet any other call delay when you using Lync?
    As the issue happen for Lync desktop client, it can be performance issue. Please check if there is any error message from FE Server when the issue happen.
    Also please check if you have updated Lync Server to the latest version, if not, update it and then test again.
    Best Regards,
    Eason Huang  
    Eason Huang
    TechNet Community Support

  • TS3367 FaceTime has a problem with calling (audio, video) between two devices when they are in the different networks.

    Hi,
    I have a problem with calling by FaceTime when me and my friend are in the different networks.
    When i call to another device I see this call on that device and tap to the answer button after that i see a message "connecting" but the first device is trying to call in during about 1 minute and finish the call.
    But if both of the devices have connected to the one network (wifi) it works correct.

    Actually, it started working fine when I told it to capture
    sound at 11kHz.. I should have tried that first, before making a
    fuss here, sorry. Looks like some weird glitch, a driver problem
    maybe, but anyway, switching to 11kHz seems to have solved
    it.

  • Problem with calling on some numbers

    Hi my mum has problem with calling on my number. She is in the USA and has a lof of money on her Skype account. When she was in Poland (country when I am now) she could without any troubles calling on my number. What is wird now in the USA she can call on some other polish numbers (I think that Skype doesn't support connection with my mobile operator).
    I fell deceived because I created Skype account and transfered some money on it for my mum to give her possibility to call to me. Is possible to fix it? Is somewhere table with can help me check which one numbers (mobile operators) Skype supports in the USA?
    My mom used Skype from Android smartphone.

    Hi my mum has problem with calling on my number. She is in the USA and has a lof of money on her Skype account. When she was in Poland (country when I am now) she could without any troubles calling on my number. What is wird now in the USA she can call on some other polish numbers (I think that Skype doesn't support connection with my mobile operator).
    I fell deceived because I created Skype account and transfered some money on it for my mum to give her possibility to call to me. Is possible to fix it? Is somewhere table with can help me check which one numbers (mobile operators) Skype supports in the USA?
    My mom used Skype from Android smartphone.

  • Problem with call forwarding. Calls can not be forwarded for incoming external calls

    Hi Everybody, how are you?
    I have a problem with call forwarding. Everything was fine but now is not working.
    In the reception of an office, the receptionist activate the call forward option to an internal extension. If somebody, internal in the office, call to the reception, the call is forwarding to the extension configured. But if I call from the outside (in example, from my cellphone) the call is not forwarded to the extension configured and continue ringing in the reception phone. Why this behavior? Any idea?
    If you know something please tell me.
    Thanks. Best regards.
    Andres Collazos.

    I encounter a similar problem with 9.1.1.
    My problem is link to this bug ID : CSCtq10477.
    Mathieu

  • Problem with Call Transaction opt-RACOMMIT = 'X'.

    Hello Experts
    I am having a problem with call transction. I am calling a Z transaction in function module. Within the Z transaction I am furhter calling some function modules and doing commit work and then some more processing  after the comit work inside  So to make sure the code after comit work is fired I am using opt-RACOMMIT = 'X' in call transaction. Whenever I set this parameter opt-RACOMMIT = 'X' call transaction fails and gives error saying No batch Input data for screen XXXX. However the Z tcode processed succesfully.
    By changing the Mode to E i found that it remians at the last screen of call transction after executing the Z transaction and never comes back 
    But if I donot use RACOMMIT = 'X'  everything is fine. Please let me know if anyone came across such problem. Any help will be apreciated.
    Thanks,
    kamal

    Hello,
    as you said, if there is more than commit statement in your ztransaction, then you should put RACOMMIT to 'X'.
    I think the problem is in your bdcdata: change it to be sure to get back to the 1st screen of your ztransaction. Then, at this point (1st screen) hit "back" button.
    Cordialement,
    Chaouki

  • Problem with calling onApplicationStart() method

    Hi all,
         I have a problem with calling application.cfc's methods from coldfusion template. The problem is like when i am calling "onapplicationstart" method inside a cfml template i getting the error shown below
    The onApplicationStart method was not found.
    Either there are no methods with the specified method name and argument types or the onApplicationStart method is overloaded with argument types that ColdFusion cannot decipher reliably. ColdFusion found 0 methods that match the provided arguments. If this is a Java object and you verified that the method exists, use the javacast function to reduce ambiguity.
    My code is like below.
    Application.cfc
    <cfcomponent hint="control application" output="false">
    <cfscript>
    this.name="startest";
    this.applicationtimeout = createtimespan(0,2,0,0);
    this.sessionmanagement = True;
    this.sessionTimeout = createtimespan(0,0,5,0);
    </cfscript>
    <cffunction name="onApplicationStart" returnType="boolean">
        <cfset application.myvar = "saurav">
    <cfset application.newvar ="saurav2">
        <cfreturn true>
    </cffunction>
    </cfcomponent>
    testpage.cfm
    <cfset variables.onApplicationStart()>
    I have tried to call the above method in different way also like
    1--- <cfset onApplicationStart()>
    i got error like this
    Variable ONAPPLICATIONSTART is undefined.
    2---<cfset Application.onApplicationStart()>
    The onApplicationStart method was not found.
    Either there are no methods with the specified method name and argument types or the onApplicationStart method is overloaded with argument types that ColdFusion cannot decipher reliably. ColdFusion found 0 methods that match the provided arguments. If this is a Java object and you verified that the method exists, use the javacast function to reduce ambiguity
    Please help me out.
    Thanks
    Saurav

    You can't just call methods in a CFC without a reference to that CFC. This includes methods in Application.cfc.
    What are you trying to do, exactly, anyway? You'd probably be better served by placing a call to onApplicationStart within onRequestStart in Application.cfc, if your goal is to refresh the application based on some condition:
    <cffunction name="onRequestStart">
         <cfif someCondition>
              <cfset onApplicationStart()>
         </cfif>
    </cffunction>
    Dave Watts, CTO, Fig Leaf Software
    http://www.figleaf.com/
    http://training.figleaf.com/

  • My sister had a problem with call volume being too low on the iPhone 5S.  Is the iPhone 6 louder?  Is anyone else feeling that call volume on iPhone 5S isn't loud enough?

    My sister had a problem with call volume being too low on the iPhone 5S.  Is the iPhone 6 louder?  Is anyone else feeling that call volume on iPhone 5S isn't loud enough?

    I personally haven't experienced much of the "reverberation/feedback" when using a headset on the i4S...
    Yes, I have near-perfect hearing too (for scope, squeaky brakes hurt my ears) I come from many conversations on many phones and types and first off, CDMA technology is great for coverage, terrible for voice quality. HD Voice in Europe made for some of the best phone conversations I've ever had.
    Back on track, feedback is most noticable (similar to the landline phone) when using the iPhone without a headset, but for me it's not an absolute criticality mainly because I use VoIP apps alot, so maybe it has desensitized me some over the past year.
    But whenever I'm on a call, and the other person has me on speakerphone, I have alot of trouble talking because of the feedback loop caused. So the less of my voice I hear the better I can talk.
    Have you tried a bluetooth headset yet?

  • When attempting to use Firefox email, I get a yellow background popup headed ' There is a problem with this message.

    when i attempt to open Firefox Mail, I get a popup (yellow background) with the heading "There is a problem with this message". We are sorry, but Yahoo Mail has encountered a temporary problem, referring to Temporary Error 4. It goes on to suggest that I might solve the problem by going to Yahoo Help Page. I tried this to no avail. Can you help? Please keep it simple as I am sort of computer impaired. Thanks, Bob Mayfield

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    *https://support.mozilla.org/kb/clear-cache-history-and-personal-information

  • I keep having the same problem with my messages over and over again. My number is not checked in my message settings it just unchecks itself

    I keep having the same problem with my messages over and over again. My number is not checked in my message settings it just unchecks itself

    Dear Tomarshe
    I had the same problem a couple of weeks back.
    What I did was that I restarted that Ipad of mine and voila!
    Problem solved!
    hope this helped!
    - DASHdotDASHdot

  • I am getting weary of my iPhone 4s. the battery life is non-existent, second, i had problems with calls, the caller couldn't hear me and now it cannot detect internet networks. Be they wi-fi or cellular. what could be the problem.

    I am getting weary of my iPhone 4s. The battery life is non-existent, secondly, I had problems with calls, the caller couldn't hear me and now it cannot detect internet networks. Be they Wi-Fi or cellular. what could be the problem?

    Mullaly75 wrote:
    I assume u guys don't understand what open source software is
    Yes, I think most of us do understand what open source software is. It sounds as if you don't. Here's some information:
    Open-source software (OSS) is computer software that is available in source code form: the source code and certain other rights normally reserved forcopyright holders are provided under an open-source license that permits users to study, change, improve and at times also to distribute the software.
    Open source software is very often developed in a public, collaborative manner. Open-source software is the most prominent example of open-sourcedevelopment and often compared to (technically defined) user-generated content or (legally defined) open content movements.
    from http://en.wikipedia.org/wiki/Open_source_software
    Yes, Tom Wu of Stanford wrote a paper on something called Secure Remote Access Protocol. It's a form of Asymetric Key Exchange and has nothing to do with hacking anything. It's actually intended to protect data.

  • TS3276 Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

    Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

    Not sure if this is a fix, but I tried sending myself a test email from only  the Bcc field, and lo and behold it now shows the Bcc field in all sent item previews;
    ...maybe leaving the 'To' field blank on purpose forced Mail to show it.
    Rebooted the Mail program, still there - rebooted the machine, still there. Hope this is still relevant and it works for you too - J.

Maybe you are looking for