Problem with calling mobiles

please assist in fixing my issue on calls. I made a subscrption on calling landline and mobile to India . i am trying to call to india mobile number from UAE but it just keep on showing ringing or connecting with out any ringtone and after words calls get drops automatically.
i tried from my iphone but situation is same even after re-installing the app.
please check and update me as soon as possible. Rayis arafath

Hello and welcome to the Skype Community.
The UAE blocks all VoIP outbound traffic including Skype. Try accessing the internet using a VPN.

Similar Messages

Problem with calling on some numbers

Hi my mum has problem with calling on my number. She is in the USA and has a lof of money on her Skype account. When she was in Poland (country when I am now) she could without any troubles calling on my number. What is wird now in the USA she can call on some other polish numbers (I think that Skype doesn't support connection with my mobile operator).
I fell deceived because I created Skype account and transfered some money on it for my mum to give her possibility to call to me. Is possible to fix it? Is somewhere table with can help me check which one numbers (mobile operators) Skype supports in the USA?
My mom used Skype from Android smartphone.

Hi my mum has problem with calling on my number. She is in the USA and has a lof of money on her Skype account. When she was in Poland (country when I am now) she could without any troubles calling on my number. What is wird now in the USA she can call on some other polish numbers (I think that Skype doesn't support connection with my mobile operator).
I fell deceived because I created Skype account and transfered some money on it for my mum to give her possibility to call to me. Is possible to fix it? Is somewhere table with can help me check which one numbers (mobile operators) Skype supports in the USA?
My mom used Skype from Android smartphone.

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

TS1567 i have uninstalled then reinstalled itunes to solve a problem with apple mobile device, but i get this message during the install. Service Apple Mobile Device failed to start. Verify that you have sufficent priveleges to start system services.

I Have reinstalled itunes to solve a problem with Apple mobile support, but during install i get this message. Service 'Apple Mobile, ( Apple Mobile Device ) failed to start. Verify that you have sufficent privileges to start system services. I'd appreciate any help on this.
Thanks bluebanana 66

Hi bluebanana 66,
Thanks for visiting Apple Support Communities.
There are a few reasons why you might receive this message after installing iTunes. You may need to verify that iTunes has been completely removed before trying to install again. See this article for the steps to completely remove and reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
If the error message persists, see the "Additional troubleshooting" section of this article for some steps that can help solve it:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Best,
Jeremy

Problem with call forwarding. Calls can not be forwarded for incoming external calls

Hi Everybody, how are you?
I have a problem with call forwarding. Everything was fine but now is not working.
In the reception of an office, the receptionist activate the call forward option to an internal extension. If somebody, internal in the office, call to the reception, the call is forwarding to the extension configured. But if I call from the outside (in example, from my cellphone) the call is not forwarded to the extension configured and continue ringing in the reception phone. Why this behavior? Any idea?
If you know something please tell me.
Thanks. Best regards.
Andres Collazos.

I encounter a similar problem with 9.1.1.
My problem is link to this bug ID : CSCtq10477.
Mathieu

Problem with Call Transaction opt-RACOMMIT = 'X'.

Hello Experts
I am having a problem with call transction. I am calling a Z transaction in function module. Within the Z transaction I am furhter calling some function modules and doing commit work and then some more processing after the comit work inside So to make sure the code after comit work is fired I am using opt-RACOMMIT = 'X' in call transaction. Whenever I set this parameter opt-RACOMMIT = 'X' call transaction fails and gives error saying No batch Input data for screen XXXX. However the Z tcode processed succesfully.
By changing the Mode to E i found that it remians at the last screen of call transction after executing the Z transaction and never comes back
But if I donot use RACOMMIT = 'X' everything is fine. Please let me know if anyone came across such problem. Any help will be apreciated.
Thanks,
kamal

Hello,
as you said, if there is more than commit statement in your ztransaction, then you should put RACOMMIT to 'X'.
I think the problem is in your bdcdata: change it to be sure to get back to the 1st screen of your ztransaction. Then, at this point (1st screen) hit "back" button.
Cordialement,
Chaouki

Problem with calling onApplicationStart() method

Hi all,
     I have a problem with calling application.cfc's methods from coldfusion template. The problem is like when i am calling "onapplicationstart" method inside a cfml template i getting the error shown below
The onApplicationStart method was not found.
Either there are no methods with the specified method name and argument types or the onApplicationStart method is overloaded with argument types that ColdFusion cannot decipher reliably. ColdFusion found 0 methods that match the provided arguments. If this is a Java object and you verified that the method exists, use the javacast function to reduce ambiguity.
My code is like below.
Application.cfc
<cfcomponent hint="control application" output="false">
<cfscript>
this.name="startest";
this.applicationtimeout = createtimespan(0,2,0,0);
this.sessionmanagement = True;
this.sessionTimeout = createtimespan(0,0,5,0);
</cfscript>
<cffunction name="onApplicationStart" returnType="boolean">
    <cfset application.myvar = "saurav">
<cfset application.newvar ="saurav2">
    <cfreturn true>
</cffunction>
</cfcomponent>
testpage.cfm
<cfset variables.onApplicationStart()>
I have tried to call the above method in different way also like
1--- <cfset onApplicationStart()>
i got error like this
Variable ONAPPLICATIONSTART is undefined.
2---<cfset Application.onApplicationStart()>
The onApplicationStart method was not found.
Either there are no methods with the specified method name and argument types or the onApplicationStart method is overloaded with argument types that ColdFusion cannot decipher reliably. ColdFusion found 0 methods that match the provided arguments. If this is a Java object and you verified that the method exists, use the javacast function to reduce ambiguity
Please help me out.
Thanks
Saurav

You can't just call methods in a CFC without a reference to that CFC. This includes methods in Application.cfc.
What are you trying to do, exactly, anyway? You'd probably be better served by placing a call to onApplicationStart within onRequestStart in Application.cfc, if your goal is to refresh the application based on some condition:
<cffunction name="onRequestStart">
     <cfif someCondition>
          <cfset onApplicationStart()>
     </cfif>
</cffunction>
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/

My sister had a problem with call volume being too low on the iPhone 5S. Is the iPhone 6 louder? Is anyone else feeling that call volume on iPhone 5S isn't loud enough?

My sister had a problem with call volume being too low on the iPhone 5S. Is the iPhone 6 louder? Is anyone else feeling that call volume on iPhone 5S isn't loud enough?

I personally haven't experienced much of the "reverberation/feedback" when using a headset on the i4S...
Yes, I have near-perfect hearing too (for scope, squeaky brakes hurt my ears) I come from many conversations on many phones and types and first off, CDMA technology is great for coverage, terrible for voice quality. HD Voice in Europe made for some of the best phone conversations I've ever had.
Back on track, feedback is most noticable (similar to the landline phone) when using the iPhone without a headset, but for me it's not an absolute criticality mainly because I use VoIP apps alot, so maybe it has desensitized me some over the past year.
But whenever I'm on a call, and the other person has me on speakerphone, I have alot of trouble talking because of the feedback loop caused. So the less of my voice I hear the better I can talk.
Have you tried a bluetooth headset yet?

Problem with Vikings Mobile number (Poland)

[Topic title updated by moderator to be more descriptive. Original topic title was: "Problem with Vikings Mobile number"]
Hello, I can't login Skype Qik for Windows Phone with Vikings Mobile country: Poland. Still getting msg wrong Phone number when try to login. On android i can login without any problems.

Hi, can you specify the first 5 digits of the phone number? For example +48 xxx
Добавляйте баллы, если моё сообщение вам помогло. Спасибо!
Возврат денег | Система обновления подписок | Заблокировали/взломали аккаунт? | Пропали контакты? | Не зайти в Skype/не добавляются контакты? | Не удалось загрузить базу данных?
Подписки | Цены

I'm having problems with my mobile internet connection

I'm having problems with my mobile internet connection. Wifi works fine. It seems like my connection get lost every tuesday and friday between 11 and 12 am local time (guess it would be between 2 and 3 am Los angeles time for example). The connection won't comeback by itself. I have to turn the phone, iPhone 4s iOS 5.0.1, off and back on again. The connection immediatly works fine after the restart and stays fine for days. I really don't know what to do. My provider doesn't seem to know either. Tried a lot of things, new settings, resets, I even got a new iPhone. Still the same problem however. Richt now I changes the time setting to see it the problem occurs at another time. Btw: the phone doesn't say "no service" and I can send sms messages and make phonecalls. The 3G symbol or the circular symbol is shown next to the name of the provider.
Does somebody has an idea what this might be? Thanks a lot.

Update. My carrier says the antenna of my iPhone 4s is not so good as the one in the iPhone 3G. They can't solve the problem. Their signal is too weak for the 4s at places I spend most of my time. Not the answer I expected, but I'm free to choose an other carrier. Hope this will help.
This was not the correct answer, I accidentially clicked the button..
Message was edited by: vasch

Lync 2013 I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second Anybody out there having similar problems with call pickup Groups?

HI
I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second
Anybody out there having similar problems with call pickup Groups?

Hi,
Did you meet any other call delay when you using Lync?
As the issue happen for Lync desktop client, it can be performance issue. Please check if there is any error message from FE Server when the issue happen.
Also please check if you have updated Lync Server to the latest version, if not, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

I am getting weary of my iPhone 4s. the battery life is non-existent, second, i had problems with calls, the caller couldn't hear me and now it cannot detect internet networks. Be they wi-fi or cellular. what could be the problem.

I am getting weary of my iPhone 4s. The battery life is non-existent, secondly, I had problems with calls, the caller couldn't hear me and now it cannot detect internet networks. Be they Wi-Fi or cellular. what could be the problem?

Mullaly75 wrote:
I assume u guys don't understand what open source software is
Yes, I think most of us do understand what open source software is. It sounds as if you don't. Here's some information:
Open-source software (OSS) is computer software that is available in source code form: the source code and certain other rights normally reserved forcopyright holders are provided under an open-source license that permits users to study, change, improve and at times also to distribute the software.
Open source software is very often developed in a public, collaborative manner. Open-source software is the most prominent example of open-sourcedevelopment and often compared to (technically defined) user-generated content or (legally defined) open content movements.
from http://en.wikipedia.org/wiki/Open_source_software
Yes, Tom Wu of Stanford wrote a paper on something called Secure Remote Access Protocol. It's a form of Asymetric Key Exchange and has nothing to do with hacking anything. It's actually intended to protect data.

Problems with calls and Answering Machine

I have a problem with calls on my Z3 dual and the Answering Machine after the update to L.I don't have Smart Answer enabled -gesture to answer calls- but when I answer a call too close to the time set to the Answering Machine to kick in, when the call reaches this time (say 25 seconds) the call will be interrupted for about 2 to 5 seconds where I can't hear the other party and they can't hear me, and then the call will resume.If I disasble the answering machine, this bug is gone.I have cleared data of the phone app but still this issue persists.

I suggest that you try to repair the phone software using PC Companion..
Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
How to backup?
Let us know if the problem persist after you've repaired the software.

New 4s connects with bluetooth in my Lexus, but I have intermittent problems with calls. I can hear them, but they can't hear me. Never did this with 3gs. Anyone else have this problem?

New 4s connected to my Lexus bluetooth. Having intermittent problem with calls. I can hear them, but they can't hear me. Never a problem with 3gs phone. Anyone else having this problem?

I ended up getting a new phone, straight through Apple. I called their technical support and went through all he basics again and they decided to replace it. Was a pretty quick process - after defaulting and resetting the whole phone (about 2 hours), I called them back to inform that there was no change, so they set up the order.
I had to give my CC# so they could hold a charge on it (in case I didn't send my old phone bach, which they sent me a pre-posted package to send it in anyway). Had a brand new iPhone 4S in my hands in 4 days, which was pretty decent. I had uploaded everything previously to iCloud, so setting up the new phone was a snap.
Only thing I really didn't like was they charged me almost 30 bucks for shipping or processing, or something. Not so sure that should have been my responsibility after spending so much on a brand new product, only to have to have it warrantied after, like, a month.

TS3367 FaceTime has a problem with calling (audio, video) between two devices when they are in the different networks.

Hi,
I have a problem with calling by FaceTime when me and my friend are in the different networks.
When i call to another device I see this call on that device and tap to the answer button after that i see a message "connecting" but the first device is trying to call in during about 1 minute and finish the call.
But if both of the devices have connected to the one network (wifi) it works correct.

Actually, it started working fine when I told it to capture
sound at 11kHz.. I should have tried that first, before making a
fuss here, sorry. Looks like some weird glitch, a driver problem
maybe, but anyway, switching to 11kHz seems to have solved
it.

Problem with calling mobiles

Similar Messages

Maybe you are looking for