Problem with Camera Archive

I have set up a new external hard drive and it is recognized by Final Cut Pro X. I connected my Canon XL1, which is recognized, created a new Archive  and started to import the input from the tape. However, a dropped frame occured after about 2 minutes , it stops recording(as expected).  In my ignorance, I had seen the dropped frame stopping the tape, and just pressed the play button on the screen and the camera continued to play with the input signal being shown on the screen, for the rest of the 52 minutes on the tape. However, when I looked at the captured archive it had only recorded up to where it had stopped at the dropped frame.
I tried to create another archive starting from the tape position after the dropped frame (as the Help instructions says that you can do that) but FCPX insisted on rewinding my tape back to the beginning, so the same problem occured.
Can I overcome this problem, otherwise I cannot store all my raw footage from the camera tapes on to the external hard drive.?

Hello,
That couldn't be the problem as the parameter you mentioned is optional.
sort_backup_type:
This parameter is optional and is used to specify four different backup
sort option. If sort_backup_type is not specified it will default to
the size option.
Check the media that you are using to backup your database, maybe there is some problem there.
Also check if the backint is running at the OS Level.
Regards,
Siddhesh

Similar Messages

  • PSE 10 from Apple Store problem with camera raw 6.7 upgrade

    PSE 9 was not opening Nikon d4 raw files so I've purchased PSE 10 at the Apple Store and installed on my Mac. PSE 10 is still not opening d4 raw files (camera raw 6.5). I tried to update to 6.7 taken from Adobe but did not succeed to install it. Could you please advice what to do?

    Thanks for your help. It works !!!
    Bartek A
    Wiadomość napisana przez Barbara B. w dniu 17 maj 2012, o godz. 00:34:
    Re: PSE 10 from Apple Store problem with camera raw 6.7 upgrade
    created by Barbara B. in Photoshop Elements - View the full discussion
    You will have to do the update manually for the app store version. Instructions are here:
    http://forums.adobe.com/message/4106477
    (that's for 6.6 but the steps/file paths are the same for 6.7)
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4414265#4414265
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4414265#4414265. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Nokia 6303c Problem with camera, says camera on st...

    nokia 6303c Problem with camera, says camera on standby solution, any body got any solutions
    many thanks in advance

    try to free up some of your phones memory delete unwanted files ,delete text ,images etc or move to memo card
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Has anyone been having problems with camera, safari etc. crashing on iOS 5.0.1 because I have been having the problem as well as my brother I have the iPhone 4. If anyone else having same issue comment below

    Has anyone been having problems with camera, safari etc. crashing on iOS 5.0.1 because I have been having the problem as well as my brother I have the iPhone 4. If anyone else having same issue comment below

    Then the next step would be a restore as new to rule out corruption in the backup.

  • Problem with create archive from mini-DV tape

    I have a fairly large collection of homemade mini-DV tapes. They are getting a bit old and I would like to back them up to my computer as well as have easy access to the footage with FCP.
    The tapes were made on a Sony TRV8 camcorder (either directly or as backups of older VHS tapes). I am using the same camcorder for playback.
    The camera shows up as expected in FCP. My goal is to "Create Archive" on each tape. Here is where I ran into some problems.
    My first tape ran about halfway through - around the 30 min mark and gave me a "end of tape" message. The footage was captured properly, but there is still half the tape to go. I tried a second time and only reached the 5 minute mark when the archiving ended with an "end of tape" message. I am on my third try as I type this and have made it to the 15 minute mark.
    I thought to possibly create multiple archives, picking up where I left off. However, whenever I select "create archive" FCP insists on rewinding the tape to the start. This behavior differs from the Apple KB article which states archiving will start from the current position of the tape.
    Adding to the problem is an issue of jittering playback.
    When I playback using the camera controls of the "play" button in the import window, things are fine. When "Create Archive" handles the playback on its own, the pictures jumps as if it is on a trampoline. Sometimes I am able to hit "stop" and then "play" to get a normal playback - sometimes hitting stop stops the archive with an "end of tape" message.
    Any ideas on what is going wrong or how to work around it? I have over 100 tapes to archive. If each tape requires numerous attempts to archive, this will never get done. I thought the archive process was supposed to import the entire tape?

    The bit about archiving from the current tape position is from Apple:
    "Final Cut Pro begins archiving from the current location on the tape."
    From Final Cut Pro X: Create and manage camera archives
    Last updated 9.16.14
    Obviously, that is wrong.
    The part about archiving ignoring timecode and just archiving the entire tape I have read in several online forum posts. Some I believe are in this forum. These same folks usually advise to use archive rather than import in a bad TC scenario. Again, it seems that wrong information.
    I am now simply doing an "import" of a tape, which appears to be working as expected. Seems either the age of the tape and/or the playback device is causing less than perfect timecode. Lot's of stutters resulting in a single "scene" being imported as many separate clips. I understand what you mean by assembling when ready to edit, but this is not practical. It looks like some areas are broken down to clips of 1-2 seconds (some even less).
    What a mess. I'm looking for a mini-DV player as I suspect my camcorder may be the culprit. Not easy to find one.
    Seems I will have to assemble the multiple clips to recreate the original. I am hoping I can then output the assembled sequences to DV files to maintain the "original" quality of the import (which should be the same as the tape since it is all digital). I would then create some FCP libraries to organize and store the clips.
    Was really hoping to simply do the camera archive thing. My tapes are all cataloged and organized. Having a number of archives which match each tape would have saved a lot of time and trouble.
    --and thanks for the help. It's a bit frustrating trying to preserve old tapes, especially when things don't work how you expect. Any workarounds or ideas to get a library of raw files out of this mess is appreciated. IF I can get that far, I plan to back up to M-disc.

  • Problems with Camera Raw 6.7 after upgrading to OS 10.8

    I've been using Photoshop CS 5 with Camera Raw 6.7 on my MacBook Pro with no issues until I recently upgraded to OS 10.8. Now my Canon CR2 files (shot with a Canon G15) won't open.  Does anyone know of a solution or work-around for this problem? 

    thanks for the prompt response...i appreciate it.  according to the link you listed, that's correct.  the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
    so it's clearly an issue related to the "upgrade" of the os.  seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it!  thanks again.

  • New problem with camera and imovie 08

    i have two questions already posted about my camera not being found by imovie 08 except that it did it the first time and wouldn't any time after that.
    well here's the new problem. as i'm sitting here trying to find some other post that could help me with my dilemna imovie opens and shows my impost screen but says "communication error". with my first joy and imovie working again came confusion about this error. the error makes it so i cannot import video because the next "error" that comes up says my camera is disconnected or off but even this is farther than i've gotten in weeks. i don't know what this error means and i still can't import video. anyone have any suggestions as to how to fix this?

    Hi
    Test another FW-Cable.
    Test Your Camera on another Mac so that DV-in still works OK
    Toogle in iMovie pref: Play-back via Camera (on<->off some times)
    Other ways to import Your miniDV tape:
    Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE Mac OS Exchange formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    What Camcorder ?
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
    Using WHAT ? :
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie 8 (7.1.?) ?
    • iMovie HD 6 (6.0.4/3) ?
    Free space on internal (start-up) hard disk ? (Others don't count)
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK eg recording and playback to TV)
    Delete iMovie pref file may help sometimes. I rather start a new account, log into
    this and have a re-try.
    from LKN 1935:
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten:
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check:
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About../More..
    under Firewire.. what do you read..?
    Yours Bengt W

  • Problem with camera connection kit and IOS 5

    Since I upgraded my IPAD 2 to IOS 5 camera connection kit is no longer working properly:
    - when importing from a given CF card for the first time camera connection kit it is working with my camera (Canon EOS 7D)
    - however, as soon as i take additional photos on a non-empty CF card, things start getting weird when importing:
       - duplicates are no longer reliably recognized (some of the photos imported before are indicated as duplicates others not), hence an incremental upload of photos is no longer viable
         - some RAW photos are corrupted during import (it shows an "RAW" icon in the photo app, but no preview and the photo cannot be enlarged)
    I never had such problems with IOS 4.x I'm really frustrated about IOS 5.0 since camera conenction kit and the ability to deal with RAW photos were my main reasons to buy an IPAD...
    Anybody experiencing  similiar problems? Any viable workarounds?
    Thanks
    Claudio

    Friend, you say "The files must have a filename with exactly 8 characters long (no spaces)"  What if one has several hundred photos/files. Renameing them on my computer each 8 characters long adds an extension (1), (2), (3), and so on. For example, "JUNE2014(1).  The connection kit won't read the photos due to the extra (1).  How can I fix this without having to rename each of the hundreds of photos one by one?
    Thank you, Cisco.

  • Problem with camera ios 5

    Since i updated my iPhone 4 to iOS 5, i have some problems with my camera,I do not have the zoom option, the video mode has a forced zoom and it is always focusig and the film is blurry.
    Can i stop the auto focusig in video mode?

    the zoom part, is corect thx
    but the in the video mode, even when i touch to focus on one point, when a move the phone around or something moves in front of it, it will focus continuously on a new object

  • Problem with camera help

    good morning, I have a problem with my ipad 2 camera photos, are blurry not sharp as it should, someone can help me with this please

    Be sure the camera is clean on your iPad!
    If you're stuck within an app or you've noticed a problem, simply hold both the home button and sleep/wake button at the same time. It's important to keep your fingers on these buttons until step 3.
    After a few seconds the red ‘slide to power off' screen will appear, simply ignore this. Ensure your fingers are still holding down the home and sleep/wake switch.
    Shortly after you should see the Apple logo, it's now safe to let go of the iPad's buttons. Your iPad should now boot, beware this process can take up to 15 minutes or so.

  • Problem with camera on N82

    Hi!
    I got my new N82 just a few days ago, but I have discovered a problem with the camera. When I take a picture with flash, I notice a distinct pink haze, and if I do a closeup with flash, it looks ghastly. Take a look at this picture:
    http://www.12b.no/blog/wp-content/uploads/2008/01/closeup-resized.jpg
    Does anyone know what might be wrong? I've reset the phone to factory defaults, it has not been dropped, shaken or otherwise physically affected. Any ideas?
    My wife's N82, bought at the same time, delivers perfect pictures.

    As you have already tried a restore, I would return it and get a new one. This is obviously hardware related.
    The best way to get a quick response is to use the boards. Please do not be offended if I don't answer emails immediately.

  • Problem with Camera Connection Kit

    I am experiencing a problem with my camera connection kit on my ipad2.  I have tried to use it today, after upgrading ios on ipad, but it does just not recognise the device any more. I have tried rebooting ipad ( twice), tried to use different sd cards, still no use. I have searched the forum for answers but apart from rebooting, ( which i've done) cannot find a fix..I dont seem to be 'Robinson Crusoe' with this problem either, judging by the forums etc..
    As I'm travelling overseas next month, i really will  need this feature on ipad, to download pics from camera. Can anyone help with this...

    Friend, you say "The files must have a filename with exactly 8 characters long (no spaces)"  What if one has several hundred photos/files. Renameing them on my computer each 8 characters long adds an extension (1), (2), (3), and so on. For example, "JUNE2014(1).  The connection kit won't read the photos due to the extra (1).  How can I fix this without having to rename each of the hundreds of photos one by one?
    Thank you, Cisco.

  • Problem with camera on z1

    i have a problem with the camera it doesn't launch from the shutter key directly the camera either gives me a "camera not available" error when i unlock the phone or i have to unlock the phone to launch the camera what to do??????

    It means that's a third party app acting up, either unisntall one by one until you find the culprit or repair your phone with PCC 
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Problem with Camera N8

    I have a problem with the camera of my N8, the lens is loked, he lens is blocked, then it worked, but the pictures in the sun, are now completely white, restart the device but there is no change, what I can do?
    My N8 es New..
    Thanks

    mmmmh...there must be a mechanical problem to the diaphragm: at first it was stuck closed, then has opened but is stuck wide open. Check if when out of the camera application (or when the phone i off), the lens (not the outer glass, the inner lens) is covered by a black diaphragm. If not (you see the hole of the lens)  it means that it's stuck open as when the cell shut off it closes . When in the camera app, depending on the external light the diaphragm should switch between a mid open to full open position. When off, it should be closed.

  • Problems with camera resolution...

    Hi everyone,
    I've acquired a security cam to test a video-chat with FMS2
    and encounter a problem with the resolution of my cam. It's a CPcam
    CPC371P and It is said to have a resolution of 510*492 (certain
    sites speak of standard resolution?).
    I wrote two simple applications, one to send the cam stream
    and one to receive it, here is the code of both my applications :
    Send.fla:
    var my_nc = new NetConnection();
    cam = Camera.get(IndexCam);
    cam.setQuality(0,80);
    cam.setMode(510,492,15,false);
    my_vid.attachVideo(cam);
    my_nc.connect("rtmp://server.no-ip.org/tchat_cam/");
    ns = new NetStream(my_nc);
    ns.attachVideo(cam);
    ns.publish("webcam","live");
    receive.fla
    var my_nc = new NetConnection();
    my_nc.connect("rtmp://server.no-ip.org/tchat_cam/");
    ns = new NetStream(my_nc);
    my_vid.attachVideo(ns);
    ns.play("webcam");
    As you can see, nothing really complicated. The applications
    work perfectly but no matter the resolution I choose, the image
    seems to be extrapolated and pixellised. I tried 512*384,
    510*492(supposed to be the cam res) and 240*160.
    In any case, the image quality is still really poor...
    If anyone could help me on this, Is it a problem with the
    camera, I may have forgotten an option in my stream ???
    Thanks in advance.
    Guaca666.

    After many tests, trying many different resolutions, It seems
    that It can't go beyond a resolution of 510x480...
    Does anyone know if it is the maximum res of a Stream or if
    there is an option to outpass this problem ? It may be the cause of
    the poor final quality of my video as the camera native resolution
    is 510x492...
    If anyone could help me, it would be a great relief... :)
    Guaca666.

Maybe you are looking for