Problem with camera connection kit and IOS 5

Since I upgraded my IPAD 2 to IOS 5 camera connection kit is no longer working properly:
- when importing from a given CF card for the first time camera connection kit it is working with my camera (Canon EOS 7D)
- however, as soon as i take additional photos on a non-empty CF card, things start getting weird when importing:
   - duplicates are no longer reliably recognized (some of the photos imported before are indicated as duplicates others not), hence an incremental upload of photos is no longer viable
     - some RAW photos are corrupted during import (it shows an "RAW" icon in the photo app, but no preview and the photo cannot be enlarged)
I never had such problems with IOS 4.x I'm really frustrated about IOS 5.0 since camera conenction kit and the ability to deal with RAW photos were my main reasons to buy an IPAD...
Anybody experiencing  similiar problems? Any viable workarounds?
Thanks
Claudio

Friend, you say "The files must have a filename with exactly 8 characters long (no spaces)"  What if one has several hundred photos/files. Renameing them on my computer each 8 characters long adds an extension (1), (2), (3), and so on. For example, "JUNE2014(1).  The connection kit won't read the photos due to the extra (1).  How can I fix this without having to rename each of the hundreds of photos one by one?
Thank you, Cisco.

Similar Messages

  • Problems with camera connection kit and charging

    I've got the iPad 1 and recently got a camera connection kit. After I used it, I tried to charge my iPad but it won't charge. The website says to just disconnect then reconnect the charger and it'll charge. I tried it at least four five times. I even tried restarting my iPad several times an it didn't work. Does anyone know how to fix this?

    Do you get the msg at the top of the screen that it's not charging? What if you plug the cable into your computer? Are you sure the 30-pin connector if fully seated?
    Try these.
    Restart the iPad by holding down on the Wake/Sleep (On/Off) button until the red slider appears and then slide to shut Off. To power up hold the Sleep/Wake button until the Apple logo appears and let go of the button.
    Reset the iPad. Note: Reset your device only if it is no longer responding and Restart does not work.
        1.    Begin by pressing the Wake/Sleep (On/Off) and Home buttons at the same time (for about 10-15 seconds). The Wake/Sleep button is the one on the top right corner of the iPad. The Home button is the round one at the bottom center of the iPad's front
        2.    Continue to hold these buttons until one of two things happen: either the screen will flash and go dark, or a red slider will appear at the top of the screen
        3.    If the slider appears, you can slide it to the right to turn off the iPad (or tap the cancel button if you change your mind)
        4.    When the iPad's screen goes dark, the iPad is off
        5.    Restart the iPad by holding down the Wake/Sleep button until the Apple icon appears. Let go of the buttons and the iPad reset will be complete.
    Resetting the iPad shouldn't normally cause you to lose and data or settings.
    How to Restore iPad http://www.ipadtomactransfer.org/ipad-tips/how-to-restore-ipad.html
     Cheers, Tom

  • Problem with Camera Connection Kit

    I am experiencing a problem with my camera connection kit on my ipad2.  I have tried to use it today, after upgrading ios on ipad, but it does just not recognise the device any more. I have tried rebooting ipad ( twice), tried to use different sd cards, still no use. I have searched the forum for answers but apart from rebooting, ( which i've done) cannot find a fix..I dont seem to be 'Robinson Crusoe' with this problem either, judging by the forums etc..
    As I'm travelling overseas next month, i really will  need this feature on ipad, to download pics from camera. Can anyone help with this...

    Friend, you say "The files must have a filename with exactly 8 characters long (no spaces)"  What if one has several hundred photos/files. Renameing them on my computer each 8 characters long adds an extension (1), (2), (3), and so on. For example, "JUNE2014(1).  The connection kit won't read the photos due to the extra (1).  How can I fix this without having to rename each of the hundreds of photos one by one?
    Thank you, Cisco.

  • Third Party 2 in 1 Camera Connection Kit and iOS 4.2

    Has anyone tried the third party 2 in 1 Camera Connection Kit with iOS 4.2? This is the connector that has both the SD slot as well as the USB slot in one unit, rather than the two separate units on the Apple branded one. The third party one is cheaper and 1 less thing to carry around or potentially lose.
    Thanks!
    Matt

    the third party 2 in 1 Camera Connection Kit
    Is this really the actual name of it?

  • TS1702 Using an iPad camera connection kit and a MIDI to USB cable to interface a MIDI keyboard with GarageBand. It works flawlessly... almost...

    I'm using an iPad camera connection kit and a MIDI to USB cable to interface a MIDI keyboard with GarageBand. It works flawlessly... until I use the sustain pedal. Once the pedal is depressed while playing a given note, from then on, the pedal itself plays the note every time it is depressed. It's not the keyboard or the pedal. I've tried others. That leaves the app or the connection between the iPad and the keyboard. I find it hard to believe I'm the only person who is experiencing this problem. Anyone have a fix?

    Yes.  There are a ton of write-ups on how to do the connections.   I connect my m-audio Keystation 61 es through the CCK to my iPad and use GarageBand to control it.  Some keyboards require a powered USB hub to make things work.  I use a belkin 4 port hub in my own setup.   Here is a link to tested / verified keyboards that work via the CCK:  http://iosmidi.com/devices/
    Hth

  • Camera Connection Kit and MIDI keyboard: device not supported

    I have a Roland RD-700SX stage piano and would like to be able to play sounds from my iPad 2 synth app (Sunrizer) via the real keyboard. Got the camera connection kit and plugged into the Roland, but the iPad tells me the RD device is not supported. How do I get it supported?
    I've read that there may be issues with iOS 8 (I have 8.1.2). Is that truly the case?

    After the original introduction of the iPad 2, Apple reduced to power levels of the 30 pin connector so as to severely limit the type of USB peripherals that can be used with iPads. There is no way, any longer,  to use a USB device that draws too much power from iPad's that use the 30-pin connector.
    I am not sure if that is still true of newer iPad's that use the Lightning type connector, but you can NOT use any high power USB device with any iPad OR any other older iDevice that uses the older 30-pin connector.
    This is NOT an IOS issues or limitation, but a hardware limitation.

  • IPad Camera Connection Kit and iPhone 3GS

    I just got home with a Camera Connection kit and while it works with an iPhone 4 and even with an old iPhone 3G I had lying around, it doesn't work with my iPhone 3GS, giving me a "The attached accessory uses too much power" error. Both the iPad and the iPhone work normally (and the iPhone's warranty expired 5 months ago). I have already tried to reset settings, reboot both the iPad and the iPhone and still couldn't getit to work. Is there anything I need to know to make it work with the 3GS running 4.2.1?

    Here are some picturres of what is happening. If it works with the iPhone 3G and the 4, it should work with the 3GS as well...
    3GS connected:
    http://img692.imageshack.us/img692/5126/imagegxw.jpg
    http://img253.imageshack.us/img253/2650/imagevnm.jpg
    3G connected:
    http://img266.imageshack.us/img266/4940/imagejsf.jpg
    4 connected:
    http://img266.imageshack.us/img266/6619/imagexce.jpg
    I don't know what else to do...

  • Workflow of ipad 1 with camera connection kit

    Hi, I am very new to ipad and wonder the following is possible:
    I know ipad can view photos in memory cards with camera connection kit (CCK), but can I view the photo and delete it straight away from my ipad without copying all the photos into my ipad? I shoot raw, will this make a difference?
    The answer will be very helpful as I am deciding whehter I should get a CCK.
    Thank You

    if shooting raw, 16G iPad wouldonly store 5xx photos if shooting in raw and leaving at least half of thecapacity for apps & videos... which is useful but not quite helpful, that'swhy I want it to work like a bigger screen instead of the 2.5".
    Besides, Idon't have that many backup at home and some are very obvious can be deletedthrough big screen (e.g. out of focus) but not the small one (the crappy screen in 40D will notlet you recognize any out of focus photo..)

  • I have been using the apple IPad camera connection kit and my photos can be viewed in the events... But the all imported folder is no longer there and the last import folder is empty. Is there any way to resolve this ang get my all imported folder back?

    I have been using the apple IPad camera connection kit and my photos can be viewed in the events... But the all imported folder is no longer there and the last import folder is empty. Is there any way to resolve this and get my all imported folder back? as well as get my last import functioning normally?

    Please please help me, if you know how.

  • Does anyone know if MOV or MP4 files from the JVC GY-HM150U will work with the Camera Connection Kit and then be readable by iMovie or similar apps?

    The JVC GY-HM150U camera and others in it's line say they offer recording in two different formats:
    Native .MOV format
    Fastest HD shoot to edit workflow. Edit immediately on Final Cut Pro™ or Premiere™ without conversion or transcoding
    Native .MP4(XDCAM-EX™) format
    Native File Recording
    Because it uses QuickTime™ as its native file format, the GY-HM150U is the perfect choice for users of Apple's Final Cut Pro™ editing system. Both HD and SD MOV files recorded by the camcorder can be dropped directly into Final Cut Pro™, keeping them first-generation and eliminating the time-consuming process of file conversion.For users of all major NLE systems, including solutions from Adobe, Avid, Grass Valley, Vegas and Apple, the GY-HM150U supports the MP4 file format, which can be brought into your editing system without re-encoding.
    HD VIDEO RECORDING
    Recording media
    SDHC (Class 6/10), SDXC Slots: x 2
    Video recording
    Video codec: MPEG2 Long GOP
    QuickTime™ File Format for Final Cut Pro™ (HD/SD)/
    MP4 File Format (HD)/AVI type-2 File Format (SD)
    Recording mode
    HQ mode: VBR, 35 Mbps (Max) MPEG-2 MP@HL
    SP mode: CBR, 25 Mbps (1440 x 1080i)/
    19 Mbps (1280 x 720p24/25/30): MPEG-2 MP@H-14
    19 Mbps (1280 x 720p50/60): MPEG-2 MP@HL
    SD Video: DV compression 4:1:1, 8-bit, 25Mbps
    Audio: LPCM 2ch, 48 kHz/16bit
    Video frame rate
    NTSC settings:
    HQ mode: 1920 x 1080/59.94i, 29.97p, 23.98p, 1440 x 1080/59.94i,
    1280 x 720/59.94p, 29.97p, 23.98p
    SP mode: 1440 x 1080/59.94i, 1280 x 720/59.94p, 29.97p, 23.98p
    SD mode: 720 x 480/59.94i
    PAL settings:
    HQ mode: 1920 x 1080/50i, 25p, 1440 x 1080/50i, 1280 x 720/50p, 25p
    SP mode: 1440 x 1080/50i, 1280 x 720/50p, 25p
    Audio recording
    LPCM 2ch, 48kHz/16-bit(Internal stereo mic/External mic input)
    and the files recorded to folders labeled "CQAV" (.MOV) or "BPAV" (.MP4), respectively, located in /PRIVATE/JVC/ off the root.
    So will the Camera Connection Kit see them properly and transfer them over to Photos, and then will iMovie be able to handle them? Or is the CCK restricted to only formats derived from DSLR cameras with "DCIM" folders, as I have heard?
    Any knowledge, especially first hand testing, would be greatly appreciated!
    Thanks,
    David
    Message was edited by: dwoodworth
    Changes made to correct the recorded file paths.

    Excuse the late post but just wondering if you came up with a solution for this problem? I experienced the exact same issue but copying the movies from Aperture into iTunes (which worked) still didn't allow them to be played on the iPad. As they had played faultlessly when imported directly from the camera connection kit!

  • IPad 4 with camera connection kit doesn't work with 64GB SDXC card on iOS 7.1.1

    I have an iPad 4 and official Apple camera connection kit. Even though ios 7 was supposed to provide compatibility with SDXC cards there is obviously an issue. I'm using 64GB SDXC and 32GB SD cards - both Sandisck Extreme Pro with RAW Canon 5D Mark III files. The 32GB cards work fine - thumbnails appear quickly and pictures import fine. After inserting the 64GB cards thumbnail holders appear very slowly but the thumbnail images do not appear so I cannot import. I'm a pro photographer and I need this functionality so that I can show pictures to clients on location. Any ideas?

    Are the photos on the 64GB card in RAW format? If so, this may apply.
    Camera Connection Kit Fix
    http://www.georgewheelhouse.com/blog/2012/10/ipad-ios-6-update---camera-connecti on-kit-fix
     Cheers, Tom 

  • Apple Camera Connection Kit and iPad 2 IOS7 work?

    I Have an iPad 2 running IOS 7.1. I was wondering if I bought the Apple Camera Connection Kit (genuine 29$ one) if it would import photos and videos from my camera? Thanks.

    Hi Breanna2405,
    Welcome to the Apple Support Communities!
    I understand that you are curious about the Apple iPad Camera Connection Kit. The kit comes with two connectors, each with a different interface. The kit has a USB interface that you can use to attach your digital camera or iPhone to and it also has an SD Card Reader to import photos and videos directly from your camera’s SD card. The following product information can be found on the link below.
    Apple iPad Camera Connection Kit - Apple Store (U.S.)
    http://store.apple.com/us/product/MC531ZM/A/apple-ipad-camera-connection-kit
    Have a great day,
    -Joe

  • Camera connection kit and photo stream

    As many people nowadays, I don't carry a digital camera with me all the time, and most of my casual photographs are taken with my cellphone, which happens to be an iphone 4.
    Since the introduction of photo stream, the process of organizing the digital photos taken with the phone, has ended being a hassle, since all photos automatically are imported to iphoto. But now, I would like to switch to another mobile platform, and obviously, I will be giving up this benefits.
    I do have a 3rd gen ipad (so I won't be missing iOS), and my question is if the camera connection kit can be use to accomplish what with the iphone is done automatically. I mean, can i do the following steps?
    1) Continue taking all the casual photographs with the new cellphone, regardless of it's mobile platform,
    2) Connect the phone to the ipad via the camera connection kit,
    3) Import to the ipad all the photographs taken,
    4) Photo stream with it's magic, will automatically import those photographs to iphoto,
    5) Continue (somehow) enjoying the benefits of automatical photo organization.
    I assume that the answer is affirmative, but I would like that someone that already has the camera connection kit help me, before i go out and make the purchase.
    Thanks!

    The CCK recognizes most cameras and card readers, but the only way to know if it will recognize a cellphone is to try it out.  It all depends on how a handshake (or whatever it's called nowadays) is negotiated.  I guess it would work most of the time, but it may vary depending on the model.

  • Camera connector Kit and iOS 4

    My iPhone 3G running iOS 4 no longer transfers photos to my iPad using the camera connector kit. Any similar or dissimilar experiences with any type of iPhone and the camera connector kit?
    Dan

    The camera connection kit uses Bluetooth drivers. That's why unexpected things like microphones work. I had to turn on Bluetooth for the wired connection to work between my iPhone and my iPad. I learned this on a podcast with Andy Ihnatko.
    Dan

  • CF card to Ipad with camera connection kit?

    I have a cannon 5d and 5d mark ii, and was really hoping to transfer images to my iPad from these cameras via the camera connection kit as they both use CF cards and not SD cards. But these cameras do not work with the USB camera connector. So I thought maybe I could use a card reader and the USB connector. But my card reader seems to use to much power. Does anyone know of a CF card reader that works with the connection kit or any other method that may help me??. Thanks

    I have a Canon 20-D and I intend on getting an upgrade Canon (not the 50-D but the one step up from that, ... the one with video capability). Anyways, I bought the Apple camera connector kit and it is the BEST...! I, too, had an initial problem with not being able to use the connector kit until I remembered that I have this "Hama" USB2.0 Card Rreader )35 in 1 (this is what I am reading that is on top of this dark blue item that is the intermediary between the camera connector kit doohicki and my computer (or ipod, or iPad). It works like a charm.
    The best thing of all is that this USB camera connector kit is NOT just for pics but can be used for lots of things that are USB connectable. In the newest issue of MacLife they discuss the multiple uses of this camera connector kit. One can even use it for a (USB) key board. One thing that i like about Apple's c.c kit is that the photos that you take can be put directly onto your ipod or ipad or iphone WITHOUT first downloading onto a computer ( & then transferring them).

Maybe you are looking for

  • Does Anyone know how to delete the backup from iCloud.

    I have a new iPhone, I restored my backup from iCloud, and now I have 2 iphone backups. There´s a message that "It can´t be erased right now, try in other moment". And i received a mail that says I´m running out of space, buy more or go to settings..

  • Is itunes compatable with windows 8

    I just purchased a new PC with Windows 8. Is itunes compatable with it?

  • How to make more room on my computer

    my computer says i have a capacity of 152.55 GB i have 38.24 GB available and i used 114.3 GB my problem is that i don't see how i used 114.3 GB my music folder is 35.61 GB and my photo folder is 10.01 GB ive done through and deleted as much as i cou

  • FW400 HD and focusrite interface conflicts

    I have a iomega FW400 external HD and focusrite saffire pro 24 DSP interface. Both of these unit operate on their own fine. But if they are both connected either daisy chain or via the FW800 and FW400 ports of the rear on my iMac (same bus I know), t

  • Solaris 10 Installation Problems

    I recently tried (several times) to install Solaris 10 on an x86_64 AMD machine with a SATA hard drive, but I kept running into problems. When using the boot DVD, it booted a temporary desktop, and asked me several questions. At the end it asked if I