Problem with camera help

good morning, I have a problem with my ipad 2 camera photos, are blurry not sharp as it should, someone can help me with this please

Be sure the camera is clean on your iPad!
If you're stuck within an app or you've noticed a problem, simply hold both the home button and sleep/wake button at the same time. It's important to keep your fingers on these buttons until step 3.
After a few seconds the red ‘slide to power off' screen will appear, simply ignore this. Ensure your fingers are still holding down the home and sleep/wake switch.
Shortly after you should see the Apple logo, it's now safe to let go of the iPad's buttons. Your iPad should now boot, beware this process can take up to 15 minutes or so.

Similar Messages

PSE 10 from Apple Store problem with camera raw 6.7 upgrade

PSE 9 was not opening Nikon d4 raw files so I've purchased PSE 10 at the Apple Store and installed on my Mac. PSE 10 is still not opening d4 raw files (camera raw 6.5). I tried to update to 6.7 taken from Adobe but did not succeed to install it. Could you please advice what to do?

Thanks for your help. It works !!!
Bartek A
Wiadomość napisana przez Barbara B. w dniu 17 maj 2012, o godz. 00:34:
Re: PSE 10 from Apple Store problem with camera raw 6.7 upgrade
created by Barbara B. in Photoshop Elements - View the full discussion
You will have to do the update manually for the app store version. Instructions are here:
http://forums.adobe.com/message/4106477
(that's for 6.6 but the steps/file paths are the same for 6.7)
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4414265#4414265
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4414265#4414265. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Nokia 6303c Problem with camera, says camera on st...

nokia 6303c Problem with camera, says camera on standby solution, any body got any solutions
many thanks in advance

try to free up some of your phones memory delete unwanted files ,delete text ,images etc or move to memo card
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Problems with "Mac Help"

My help files, especially "Mac Help", no longer work properly since upgrading to Tiger. If I open "Mac Help", for example, the help window will pop up, but the links will not work (nothing happens when I click on them) and the search feature in help will not work either (the little gray "clock" just spins next to the help bar and nothing else ever happens). Any suggestions on this one? As I'm a relatively recent Mac convert, the help feature was something that I came to rely on. Thanks!

Hi CP,
This is a common problem with Mac Help. When it happens, try first (quit Help) deleting this folder:
Home/Library/Caches/com.apple.helpui
If Help still doesn't work, try then deleting those files:
Home/Library/Preferences/com.apple.helpviewer.plist
Home/Library/Preferences/com.apple.help.plist
(and this one if you find it):
Home/Library/Preferences/com.apple.helpui.plist
See also this KB article for more info
- Mac OS X 10.2, 10.3: Mac Help Viewer unexpectedly quits
and this excellent X Lab FAQ
- Troubleshooting Help Viewer
It seems (not sure about that), that Help caches get easily corrupted when interrupting searches instead of patiently waiting for its internet accessings etc?
Good luck!
Axl

I can't delete my bt emails or move them to folders, other emails from tiscali no problem with, anyone help please

I can't delete my bt emails or move them to folders, other emails from tiscali no problem with, anyone help please

I did that and it is currently whirring away, had over 16000 emails as everything got imported when I set emails up (only had this computer 5 days). So will see what happens when it stops doing whatever it is doing. Sorry if I appear stupid but first Mac I have owned so everything a bit new. Have managed to get most things working correctly just can't sort this BT email problem out. Will report back later!

ITunes has stopped working. Problem with iTunes Helper Module

After i installed the 7.3.1 iTUNES update for my windows VISTA, i keep getting iTunes has stopped working, and a message saying there is a problem with iTunes Helper Module.. I've tried to re-install and everything.. Can anyone help me out?

here you go
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunesHelper.exe
Application Version: 7.3.1.3
Application Timestamp: 468d67e8
Fault Module Name: QuickTimeStreamingAuthoring.qtx
Fault Module Version: 7.2.0.240
Fault Module Timestamp: 4684a83a
Exception Code: c0000005
Exception Offset: 00016c09
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 18fe
Additional Information 2: f42ba5cd8b2ed31f18b99a5ea46137af
Additional Information 3: 4735
Additional Information 4: ae0a749503b699b3b75d581a3dbfd557
Extra information about the problem
Bucket ID: 466198587

Problem with Adobe Help Online

Dear sir,
Hi, My name is Palm.
I have a problem with Adobe Help. Every time I use the function "Leyer Style" >> "Gradient Overlay".
Adobe Help Online is often displayed without my pressing or click anything.
It was a problem with my work.
I have to restart the program. To work again.
Thanks for the help.

Thank you.
It's excellent for this solution.
I have solved the problem as suggested.
Now the problem is still not found but I will monitor this issue further.

Has anyone been having problems with camera, safari etc. crashing on iOS 5.0.1 because I have been having the problem as well as my brother I have the iPhone 4. If anyone else having same issue comment below

Has anyone been having problems with camera, safari etc. crashing on iOS 5.0.1 because I have been having the problem as well as my brother I have the iPhone 4. If anyone else having same issue comment below

Then the next step would be a restore as new to rule out corruption in the backup.

New problem with camera and imovie 08

i have two questions already posted about my camera not being found by imovie 08 except that it did it the first time and wouldn't any time after that.
well here's the new problem. as i'm sitting here trying to find some other post that could help me with my dilemna imovie opens and shows my impost screen but says "communication error". with my first joy and imovie working again came confusion about this error. the error makes it so i cannot import video because the next "error" that comes up says my camera is disconnected or off but even this is farther than i've gotten in weeks. i don't know what this error means and i still can't import video. anyone have any suggestions as to how to fix this?

Hi
Test another FW-Cable.
Test Your Camera on another Mac so that DV-in still works OK
Toogle in iMovie pref: Play-back via Camera (on<->off some times)
Other ways to import Your miniDV tape:
Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Exchange formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
What Camcorder ?
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
Using WHAT ? :
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
Free space on internal (start-up) hard disk ? (Others don't count)
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Delete iMovie pref file may help sometimes. I rather start a new account, log into
this and have a re-try.
from LKN 1935:
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten:
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check:
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
Yours Bengt W

Problem with Camera Connection Kit

I am experiencing a problem with my camera connection kit on my ipad2. I have tried to use it today, after upgrading ios on ipad, but it does just not recognise the device any more. I have tried rebooting ipad ( twice), tried to use different sd cards, still no use. I have searched the forum for answers but apart from rebooting, ( which i've done) cannot find a fix..I dont seem to be 'Robinson Crusoe' with this problem either, judging by the forums etc..
As I'm travelling overseas next month, i really will need this feature on ipad, to download pics from camera. Can anyone help with this...

Friend, you say "The files must have a filename with exactly 8 characters long (no spaces)" What if one has several hundred photos/files. Renameing them on my computer each 8 characters long adds an extension (1), (2), (3), and so on. For example, "JUNE2014(1). The connection kit won't read the photos due to the extra (1). How can I fix this without having to rename each of the hundreds of photos one by one?
Thank you, Cisco.

Problems with camera resolution...

Hi everyone,
I've acquired a security cam to test a video-chat with FMS2
and encounter a problem with the resolution of my cam. It's a CPcam
CPC371P and It is said to have a resolution of 510*492 (certain
sites speak of standard resolution?).
I wrote two simple applications, one to send the cam stream
and one to receive it, here is the code of both my applications :
Send.fla:
var my_nc = new NetConnection();
cam = Camera.get(IndexCam);
cam.setQuality(0,80);
cam.setMode(510,492,15,false);
my_vid.attachVideo(cam);
my_nc.connect("rtmp://server.no-ip.org/tchat_cam/");
ns = new NetStream(my_nc);
ns.attachVideo(cam);
ns.publish("webcam","live");
receive.fla
var my_nc = new NetConnection();
my_nc.connect("rtmp://server.no-ip.org/tchat_cam/");
ns = new NetStream(my_nc);
my_vid.attachVideo(ns);
ns.play("webcam");
As you can see, nothing really complicated. The applications
work perfectly but no matter the resolution I choose, the image
seems to be extrapolated and pixellised. I tried 512*384,
510*492(supposed to be the cam res) and 240*160.
In any case, the image quality is still really poor...
If anyone could help me on this, Is it a problem with the
camera, I may have forgotten an option in my stream ???
Thanks in advance.
Guaca666.

After many tests, trying many different resolutions, It seems
that It can't go beyond a resolution of 510x480...
Does anyone know if it is the maximum res of a Stream or if
there is an option to outpass this problem ? It may be the cause of
the poor final quality of my video as the camera native resolution
is 510x492...
If anyone could help me, it would be a great relief... :)
Guaca666.

Problems with Camera Raw 6.7 after upgrading to OS 10.8

I've been using Photoshop CS 5 with Camera Raw 6.7 on my MacBook Pro with no issues until I recently upgraded to OS 10.8. Now my Canon CR2 files (shot with a Canon G15) won't open. Does anyone know of a solution or work-around for this problem?

thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again.

Problem with Adobe Help in Creative Cloud

I'm using Mac OSX 10.9 but this problem has been here before that.
My Adobe Help application says "No Adobe Products are currently installed." which is completely wrong. If I look at the "Local Content tab there is nothing displayed. I did have the "Display Local Help Content only" set to "yes, because it annoyed me to be taken to SLOW website whenever I clicked help. But now I have no other options and it seems to have mucked uo the help system altogether. I have changed it to "No" now so that it will display online content, but the real problem is that it does not recognise ANY of the installed CC applications.
Any clues as to what the problem is or how I can make Adobe Help recognise my installed applications? Adobe Help has SUCKED BADLY for local help content for a long now.

i too have issues with the help the tech sopport for Adobe. When i last tried to call i was told it would be a hour wait. Using the online chat was useless as well. Then to top things off my code for the ID theft monitering servies is not valid. Now i have to call and deal with that, there is another half a day wasted. I think its time to hack the software, YES adobe i have the .DLL files needed to have creative cloud or windows 7. Unless i get better help im going to cancle my subscription and just intall the hacks so the software still works. who needs support they are useless anyway.

Problem with printing help plz

Hi Folks,
Got a problem with printing hope you can help. I have just got back from an online printers some 40 prints. There is a big difference between the brightness of the print (it being a lot darker) and the elements screen. The company I used comes highly reccomended by many different sources. What am I doing wrong and how do I fix?
Thanks

which online service provider are you using?

Problems with the help menu.

Hi. I'm a new iMac user and have had problems using the help menu on my computer. Every time I click on help and search a topic I get a blank untitled window. Nothing ever opens up in the window and then the spinning beach ball comes up. It is only in the blank window and I am still able to use the computer normally. I am unable to close or force quit the program and have to restart to get rid of it. I have called tech support and spent over an hour on the phone with no help and ended up reinstalling the operating system. Still having the same problem. Anyone have some advice or have had a similar problem?

Welcome to Apple Discussions!
Try reindexing the hard drive via Apple menu -> System Preferences -> Spotlight.
Drag the hard drive into the Privacy section, and the select it in that section, and select the minus sign in the bottom left corner below the field holding the drive.
Click then on Spotlight every half hour to wait until the Indexing status no longer shows up.
If Help still doesn't come up entirely, try clicking on the clear jewel in the upper right corner of the Help menu. It may reveal the search field. If it doesn't, quit from the Help Viewer application menu, and then go to com.apple.helpviewer.plist and delete it. Help should then load normally.
If it still doesn't, try repairing permissions with Applications -> Utilities -> Disk Utility.
In the end, if that still doesn't work, let us know, and we might suggest something else.

Problem with camera help

Similar Messages

Maybe you are looking for