Problem with camera. lumia 920

Camera is not working after the new update 8.1 Denim. I tried Both soft reset and Hard reset.... Even Nokia Care is also fail to solve this problem..... plzzzz help me..

What specifically is the issue? I.e. is the Camera app loading but you don't see an image? Are there any error messages? And have you tried any of Nokia's specialty camera apps? (Lumia Camera, Lumia Panorama, etc).
I have a 920 with Denim installed it's working correctly - so worst case you may need to do a hard reset.
http://www.windowsphone.com/en-US/how-to/wp8/settings-and-personalization/reset-my-phone

Similar Messages

Problem with camera (Lumia 930)

Hey there... today I took some photos and as you can see there is small circular darker spot in the left. I've cleaned the lens perfectly, but this issue still exists.
How do I get rid of it?
Thanks for helping me.
Attachments:
WP_20140930_10_53_18_Raw[1].jpg ‏974 KB

I would guess this is a hardware issue with the optics, take the phone back to point of purchase or to your nearest Nokia Care point to have it repaired/replaced.

Nokia 6303c Problem with camera, says camera on st...

nokia 6303c Problem with camera, says camera on standby solution, any body got any solutions
many thanks in advance

try to free up some of your phones memory delete unwanted files ,delete text ,images etc or move to memo card
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

PSE 10 from Apple Store problem with camera raw 6.7 upgrade

PSE 9 was not opening Nikon d4 raw files so I've purchased PSE 10 at the Apple Store and installed on my Mac. PSE 10 is still not opening d4 raw files (camera raw 6.5). I tried to update to 6.7 taken from Adobe but did not succeed to install it. Could you please advice what to do?

Thanks for your help. It works !!!
Bartek A
Wiadomość napisana przez Barbara B. w dniu 17 maj 2012, o godz. 00:34:
Re: PSE 10 from Apple Store problem with camera raw 6.7 upgrade
created by Barbara B. in Photoshop Elements - View the full discussion
You will have to do the update manually for the app store version. Instructions are here:
http://forums.adobe.com/message/4106477
(that's for 6.6 but the steps/file paths are the same for 6.7)
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4414265#4414265
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4414265#4414265. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Has anyone been having problems with camera, safari etc. crashing on iOS 5.0.1 because I have been having the problem as well as my brother I have the iPhone 4. If anyone else having same issue comment below

Has anyone been having problems with camera, safari etc. crashing on iOS 5.0.1 because I have been having the problem as well as my brother I have the iPhone 4. If anyone else having same issue comment below

Then the next step would be a restore as new to rule out corruption in the backup.

Problems in updating Lumia 920 and installing apps

Hi,
I have had problems with the new (approx. 1 month old) Lumia 920. In the beginning (bout 2 weeks) everything worked fine. Then started synchronization problems with MS account. I was some how able to fix these problems, even they renewed. I thought that the Black update would fix the problems, but the phone did not istalled the update. It started to download the update, but after dowloading 20-50 % of the update the download crashed with some error code. I also had problems to install some apps. App was downloaded to the phone, but duringthe installation the process crashed and reported some error. After one week of trying different kinds of tricks to get the update and installation of apps working I decided to reset the phone to original setting i.e. hard reset. The reset cycle went through fine. i was able to set the MS account and synchronization was working, got e-mail and contacts to the phone. Still the update does not work and now I can not install any apps to the phone. There are over 20 updates waiting, but always the result is the same. App is downloaded to the phone, but during installation the process crashes. I have tried different connections WiFi and mobile data and done the soft reset every now and then. Is there still something I can do myself to try the fix the problem or should I just take the phone to the Nokia Care.

Bro
I would recommend you to check your device thoroughly by Nokia Care Technical team or get it replaced because the problems you have described, unluckily it is a defective device.
KK

Problems with Camera Raw 6.7 after upgrading to OS 10.8

I've been using Photoshop CS 5 with Camera Raw 6.7 on my MacBook Pro with no issues until I recently upgraded to OS 10.8. Now my Canon CR2 files (shot with a Canon G15) won't open. Does anyone know of a solution or work-around for this problem?

thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again.

New problem with camera and imovie 08

i have two questions already posted about my camera not being found by imovie 08 except that it did it the first time and wouldn't any time after that.
well here's the new problem. as i'm sitting here trying to find some other post that could help me with my dilemna imovie opens and shows my impost screen but says "communication error". with my first joy and imovie working again came confusion about this error. the error makes it so i cannot import video because the next "error" that comes up says my camera is disconnected or off but even this is farther than i've gotten in weeks. i don't know what this error means and i still can't import video. anyone have any suggestions as to how to fix this?

Hi
Test another FW-Cable.
Test Your Camera on another Mac so that DV-in still works OK
Toogle in iMovie pref: Play-back via Camera (on<->off some times)
Other ways to import Your miniDV tape:
Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Exchange formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
What Camcorder ?
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
Using WHAT ? :
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
Free space on internal (start-up) hard disk ? (Others don't count)
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Delete iMovie pref file may help sometimes. I rather start a new account, log into
this and have a re-try.
from LKN 1935:
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten:
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check:
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
Yours Bengt W

Problem with camera connection kit and IOS 5

Since I upgraded my IPAD 2 to IOS 5 camera connection kit is no longer working properly:
- when importing from a given CF card for the first time camera connection kit it is working with my camera (Canon EOS 7D)
- however, as soon as i take additional photos on a non-empty CF card, things start getting weird when importing:
- duplicates are no longer reliably recognized (some of the photos imported before are indicated as duplicates others not), hence an incremental upload of photos is no longer viable
- some RAW photos are corrupted during import (it shows an "RAW" icon in the photo app, but no preview and the photo cannot be enlarged)
I never had such problems with IOS 4.x I'm really frustrated about IOS 5.0 since camera conenction kit and the ability to deal with RAW photos were my main reasons to buy an IPAD...
Anybody experiencing similiar problems? Any viable workarounds?
Thanks
Claudio

Friend, you say "The files must have a filename with exactly 8 characters long (no spaces)" What if one has several hundred photos/files. Renameing them on my computer each 8 characters long adds an extension (1), (2), (3), and so on. For example, "JUNE2014(1). The connection kit won't read the photos due to the extra (1). How can I fix this without having to rename each of the hundreds of photos one by one?
Thank you, Cisco.

Problem with camera ios 5

Since i updated my iPhone 4 to iOS 5, i have some problems with my camera,I do not have the zoom option, the video mode has a forced zoom and it is always focusig and the film is blurry.
Can i stop the auto focusig in video mode?

the zoom part, is corect thx
but the in the video mode, even when i touch to focus on one point, when a move the phone around or something moves in front of it, it will focus continuously on a new object

Problem with camera help

good morning, I have a problem with my ipad 2 camera photos, are blurry not sharp as it should, someone can help me with this please

Be sure the camera is clean on your iPad!
If you're stuck within an app or you've noticed a problem, simply hold both the home button and sleep/wake button at the same time. It's important to keep your fingers on these buttons until step 3.
After a few seconds the red ‘slide to power off' screen will appear, simply ignore this. Ensure your fingers are still holding down the home and sleep/wake switch.
Shortly after you should see the Apple logo, it's now safe to let go of the iPad's buttons. Your iPad should now boot, beware this process can take up to 15 minutes or so.

Problem with camera on N82

Hi!
I got my new N82 just a few days ago, but I have discovered a problem with the camera. When I take a picture with flash, I notice a distinct pink haze, and if I do a closeup with flash, it looks ghastly. Take a look at this picture:
http://www.12b.no/blog/wp-content/uploads/2008/01/closeup-resized.jpg
Does anyone know what might be wrong? I've reset the phone to factory defaults, it has not been dropped, shaken or otherwise physically affected. Any ideas?
My wife's N82, bought at the same time, delivers perfect pictures.

As you have already tried a restore, I would return it and get a new one. This is obviously hardware related.
The best way to get a quick response is to use the boards. Please do not be offended if I don't answer emails immediately.

Problem with Camera Connection Kit

I am experiencing a problem with my camera connection kit on my ipad2. I have tried to use it today, after upgrading ios on ipad, but it does just not recognise the device any more. I have tried rebooting ipad ( twice), tried to use different sd cards, still no use. I have searched the forum for answers but apart from rebooting, ( which i've done) cannot find a fix..I dont seem to be 'Robinson Crusoe' with this problem either, judging by the forums etc..
As I'm travelling overseas next month, i really will need this feature on ipad, to download pics from camera. Can anyone help with this...

Friend, you say "The files must have a filename with exactly 8 characters long (no spaces)" What if one has several hundred photos/files. Renameing them on my computer each 8 characters long adds an extension (1), (2), (3), and so on. For example, "JUNE2014(1). The connection kit won't read the photos due to the extra (1). How can I fix this without having to rename each of the hundreds of photos one by one?
Thank you, Cisco.

Problem with camera on z1

i have a problem with the camera it doesn't launch from the shutter key directly the camera either gives me a "camera not available" error when i unlock the phone or i have to unlock the phone to launch the camera what to do??????

It means that's a third party app acting up, either unisntall one by one until you find the culprit or repair your phone with PCC
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Problem with Camera N8

I have a problem with the camera of my N8, the lens is loked, he lens is blocked, then it worked, but the pictures in the sun, are now completely white, restart the device but there is no change, what I can do?
My N8 es New..
Thanks

mmmmh...there must be a mechanical problem to the diaphragm: at first it was stuck closed, then has opened but is stuck wide open. Check if when out of the camera application (or when the phone i off), the lens (not the outer glass, the inner lens) is covered by a black diaphragm. If not (you see the hole of the lens) it means that it's stuck open as when the cell shut off it closes . When in the camera app, depending on the external light the diaphragm should switch between a mid open to full open position. When off, it should be closed.

Problem with camera. lumia 920

Similar Messages

Maybe you are looking for