Problem with Camera Raw

I am using Photoshop CS6 v 13.0.1 x64. I have been using Photoshop for years, of course various versions. All updates have been installed. My OS is Windows 7 Pro X64 with all applicable updates. I just downloaded NEF files from my D2X and was opening them in Camera Raw. I then selected similar NEFs and clicked Synchronmize but nothing happened. No error message, nothing! This never happened before. I have 24 G RAM, plenty of free space on the C drive (334Gs). I.have the OnOne plug in installed and may have added some free presets lately.
I used to download pix from my cameras and never encountered this problem before.
No changes were made to the system that I am aware of.
What is going on? How do I fix this?

PSE version?

Similar Messages

PSE 10 from Apple Store problem with camera raw 6.7 upgrade

PSE 9 was not opening Nikon d4 raw files so I've purchased PSE 10 at the Apple Store and installed on my Mac. PSE 10 is still not opening d4 raw files (camera raw 6.5). I tried to update to 6.7 taken from Adobe but did not succeed to install it. Could you please advice what to do?

Thanks for your help. It works !!!
Bartek A
Wiadomość napisana przez Barbara B. w dniu 17 maj 2012, o godz. 00:34:
Re: PSE 10 from Apple Store problem with camera raw 6.7 upgrade
created by Barbara B. in Photoshop Elements - View the full discussion
You will have to do the update manually for the app store version. Instructions are here:
http://forums.adobe.com/message/4106477
(that's for 6.6 but the steps/file paths are the same for 6.7)
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4414265#4414265
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4414265#4414265. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problems with Camera Raw 6.7 after upgrading to OS 10.8

I've been using Photoshop CS 5 with Camera Raw 6.7 on my MacBook Pro with no issues until I recently upgraded to OS 10.8. Now my Canon CR2 files (shot with a Canon G15) won't open. Does anyone know of a solution or work-around for this problem?

thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again.

Problem with Camera Raw update in Elements 11

I need to update the raw plug-in in elements 11, but when I go to the update section, I just keep getting an error message (which says server busy or might be prevented by firewall). I suspect that my firewall is stopping the updates, but I don't know how to over-ride this. Can anyone explain it please? (I have managed to 'allow' certain things on the firewall, but for this update, I don't know what I'm looking for to 'allow'!

I know nothing about Photoshop Elements. But, according to this list, Photoshop Elements can only work with Camera Raw through version 8.0.
Camera Raw-compatible Adobe applications

Problem with camera raw for Sony 350K and PSE 6

I have recently tried to download my first batch of RAW pictures taken with a Sony A350K camera into PSE6 but I am told the format is not recognised. I thought I had successfully down loaded ACR 4.6 but apparently not as they are still not recognised. Can anyone throw any light on what I might be doing wrong?

If you have left the old version of Camera Raw.8bi in the folder, even if you have renamed it, Photoshop will still use it.
Follow this link:-
http://kb2.adobe.com/cps/402/kb402444.html
and scroll down to the section on installing the plugin in PSE 6.

Problem with Camera Raw update

Downloaded Camera Raw 6.2 update. When attempting to install it I get a message saying I need a new copy of Adobe Application Manager. I can't find such a download anywhere on the site. A search turns up nothing called "Application Manager". Is anyone else experiencing this problem?

Adobe Application Manager appears to be how Adobe checks serial number and manages free trial periods. If you go to your boot drive and open Library > Application Support > Adobe > OOBE > PDApp > core you should find Adobe Application Manager. If you have moved files, deleted files or whatever things might not be where they should. I'd probably reinstall PS CS5 which should reinstall Application Manager if it's not there.

Problem opening photos with camera raw 7.1 with Photoshop CS6

I am using Windows 7 32 bit system with 4GB ram and graphics accelerator.
I have Photoshop CS5.1 installed in the same system at it works perfectly.
What happens is when I use the B+W function, I get an error message saying that I have not enough ram.
After that, when I open the next photo with Camera Raw, the raw image will not open.
I have already maximised the Ram that Photoshop can use to 1.7GB and there is more than enough space in my scratch disk.
Anyone can tell me what the problem is?

Hi Noel,
Thanks for your reply.
Just to clarify.
I applied B+W layer adjustment on my photos. It is part of an automated set of actions which I apply to all my photos. I adjust the B&W layer to 50% overlay. When I click on the B&W adjustment layer, there is an error message that tells me I have not enough ram. Once that happens, when I open the next photo in raw, I don't see the new photo but only the frame of the camera raw though which I see my photoshop desktop.
It doesn't occur with the first few photos. But by the 3rd or 4th it happens.
I will adjust it to 50% and see what happens.
Leslie

Problem loading large DNG images with Camera RAW!

Hello,
When loading large DNGs with Camera RAW 4.4 (for example, DNG dimensions are 9984x6656) CS3 says "cannot open the image because this is not a right kind of a document". EXACTLY THE SAME file is loaded without a problem using Camera RAW 3.7 and 4.0 (did not test other versions). Have you specially prevented loading of large files? Wouldn't it be better to provide this as an option? It's a real disappointment - new version of plugin CANNOT do the thing that older versions CAN. (Simply using older version is not an option, as I need to load RAWs from new cameras, like Canon 450D).
Dear Adobe, please correct this problem :)

It might be wise to give some insight like how the DNG was created, by what version of what software, if ACR is hosted in Photoshop or Bridge... What platform you are using, how much RAM, memory allocation, etc.

Photoshop CC does not open a RAW NEF file with Camera Raw 8.5. Also, my Help Update gives me an old version.

I've tried updating the plug-in using PS Help CC but it updates with an old version. I downloaded 8.5 and did a manual install but Photoshop doesn't recognize it and the plug-in "cannot be found." I can see the plug-in on the HD drive where it was supposed to go. What am I missing here?

Try this if you are experiencing problems.: Camera Raw plug-in installer
Gene

Bridge crashes with camera raw 4.4.1 installed, OK with 4.0

When I use Bridge with camera raw plugin 4.4.1 installed to navigate to a folder with at least one raw image shot with Sony Alpha 100, it consistently crashes. I can open the same image using Photoshop and Camera raw without a problem, so the image is not corrupted. Bridge works as expected with raw files from Sony Alpha 700.
If I revert to camera raw plugin 4.0 it works like a charm for Sony Alpha 100 pics, but my new Sony Alpha 700 is not supported.
I have tried using a clean user account, with no caches at all so that can not be the problem. I'm on a MacBook Pro with OS 10.5.3 and CS3.
Here is an excerpt from the crash log, showing that it is indeed the camera raw plugin causing the trouble:
Process: Bridge CS3 [802]
Path: /Applications/Adobe Bridge CS3/Bridge CS3.app/Contents/MacOS/Bridge CS3
Identifier: com.adobe.bridge2
Version: 2.1.1.9 (2.1.1.9)
Code Type: X86 (Native)
Parent Process: launchd [604]
Date/Time: 2008-06-26 08:35:41.310 +0200
OS Version: Mac OS X 10.5.3 (9D34)
Report Version: 6
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000008
Crashed Thread: 10
Thread 10 Crashed:
b 0 com.adobe.CameraRaw 0x19849da3 0x196a6000 + 1719715
1 com.adobe.CameraRaw 0x1984a976 0x196a6000 + 1722742
2 com.adobe.CameraRaw 0x1984b775 0x196a6000 + 1726325
3 com.adobe.CameraRaw 0x1984cefc 0x196a6000 + 1732348
4 com.adobe.CameraRaw 0x19982638 EntryFM + 965714
5 com.adobe.CameraRaw 0x1978dd45 0x196a6000 + 949573
6 com.adobe.CameraRaw 0x196ed798 0x196a6000 + 292760
7 com.adobe.CameraRaw 0x1978e63b 0x196a6000 + 951867
8 com.adobe.CameraRaw 0x196eec2b 0x196a6000 + 298027
9 com.adobe.CameraRaw 0x19733a15 0x196a6000 + 580117
10 com.adobe.CameraRaw 0x19926a19 EntryFM + 589875
11 com.adobe.CameraRaw 0x19927271 EntryFM + 592011
12 com.adobe.CameraRaw 0x19921b15 EntryFM + 569647
13 com.adobe.CameraRaw 0x1979c1fb 0x196a6000 + 1008123
14 com.adobe.CameraRaw 0x198df7bd EntryFM + 298455
15 com.adobe.CameraRaw 0x198e1c37 EntryFM + 307793
16 com.adobe.bridge2 0x00420a35 ThumbMetaLib::CameraRawFormat::ReadDraftThumbnail(ZFileSpec const&, ThumbMetaLib::ThumbnailMetaInfo&) + 243
17 com.adobe.bridge2 0x003fc2d9 ThumbMetaLib::FBFormatReader::ReadDraft(ThumbMetaLib::FBFileFormat*, ZFileSpec const&, ThumbMetaLib::ThumbnailMetaInfo&) + 89
18 com.adobe.bridge2 0x003f3d61 ThumbMetaLib::MakeDraftFromFile(ThumbMetaLib::FBFileFormat*, ZFileSpec const&, ThumbMetaLib::ThumbnailMetaInfo&) + 207
19 com.adobe.bridge2 0x0051962e vio_timeout + 78060
20 com.adobe.bridge2 0x005e3470 vio_timeout + 905006
21 com.adobe.bridge2 0x005e8ebf vio_timeout + 928125
22 com.adobe.bridge2 0x00523699 vio_timeout + 119127
23 com.adobe.bridge2 0x003c5704 Mondo::CThread::EntryProc() + 18
24 ...ple.CoreServices.CarbonCore 0x9424955b PrivateMPEntryPoint + 56
25 libSystem.B.dylib 0x970036f5 _pthread_start + 321
26 libSystem.B.dylib 0x970035b2 thread_start + 34
Any ideas to resolve this is greatly appreciated!
Torbjørn

I'm still looking for some help.
Now that I've learned a little bit more, let me try to restate my problem. In using both a Nikon D200 and a new Nikon D300. For software I'm using PS CS3 Extended Edition, as a part of Adobe's CS3 Design Premium suite. My Dell Inspiron 530 is running Vista Home Premium.
As I've said before, my problem is that I cannot open NEF files shot with either the D200 or D300 (and they are uncompressed NEF files). I downloaded the new Camera Raw plug-in, ver. 4.3.1, and unzipped it to \program files\common files\adobe\plug-in\CS3\file format. The Camera Raw.8bi file is dated 11/30/07 and is about 10,446,000 in size. Then I run a search of my hard drive to make sure there are no other Camera Raw files anywhere. Then, in PS Bridge, I purge the cache of the file folder where the NEF files are located. Then I try to open a NEF file and get the following error message in a PS CS3 Extended box:
"Could not complete your request because it is not the right kind of document."
Then, immediately afterwards I ran another search of my hard drive, and the Camera Raw.8bi file is GONE, DISAPPEARED, VANISHED.
Is the problem with the CS3 Entended Edition?
Can anyone help me out here, particularly you Nikon shooters?
Thanks for any advice.
Bob

Possible GPU Issues With Camera Raw 6.6

Over the past day on my Windows 7 x64 workstation I've done some updates. Specifically:
The Adobe updater brought in Camera Raw 6.6, replacing 6.5.
I updated the to the ATI Catalyst 11.12 display driver version from previous version 11.11.
I allowed Windows Update to apply the dozen or so changes that were pending.
I was just doing some OpenGL testing with Photoshop CS5 12.0.4 x64 and I noticed that under some conditions I saw Photoshop drop out of OpenGL acceleration. Specifically, when I opened a Canon 5D Mark II image through Camera Raw I saw subsequent operations stop using OpenGL acceleration even though the checkmark remained in the [ ] Enable OpenGL Drawing box in Edit - Preferences - Performance.
What I did to determine whether OpenGL acceleration was enabled was this: Select the Zoom Tool, then click and hold the left mouse button on the image. When OpenGL is enabled, I see a smooth increase in zoom. When it goes disabled, I see only a jump in zoom level after letting up the mouse button. Also, the [ ] Scrubby Zoom box gets grayed out. As I mentioned, even in this condition, a check of Edit - Preferences - Performance still shows OpenGL enabled.
Just as a control, I saved the converted file as a PSD, and every time I opened THAT file (with a fresh copy of PS CS5 running) and did the same operations I could not reproduce the failure. The difference being I did not run Camera Raw.
Since I wasn't specifically looking for issues with Camera Raw, I am not sure that the problem occurred every time I did run Camera Raw. I do know that when I open images from my own camera (40D; I do not own a 5D Mark II) that the problem doesn't seem to occur. Notably I always open my image from Camera Raw to the largest possible pixel size - 6144 x 4096, as I did with the 5D Mark II image, so it's not an obvious size difference that's leading to the issue. Given other comments of late, I'm wondering if it could be a specific issue with conversions of files from 5D Mark II.
Nor am I sure whether any of the above updates caused it - it might done this before; I don't regularly convert 5D Mark II images. I DO think I would have noticed Photoshop reverting to GDI operation before, since I just noticed it pretty easily, but I'm not completely sure of that either. I do use OpenGL-specific features (such as right-click brush sizing) pretty often.
I'm trying now to find a set of steps with which to reliably reproduce the problem now, and will advise.
-Noel

Figures. Now I can't reproduce the problem at all, even after an hour of testing. It probably had nothing to do with Camera Raw.
I wonder if there are latent GPU status indicators and config values stored by Photoshop based on its specific environment that might not be right for the first run (or first few runs) after a display driver update. Hm....
-Noel

Minolta DiMAGE A200 support broke with Camera Raw 2.1

Hi,
I am new to this forum, but I hope someone can help.
Using Aperture since 1.5 with a couple of cameras I started with my Minolta DiMAGE A200. Unfortunately this camera was not supported by Aperture, but the identical A2.
Of course there was a trick to bring A200 Raw support to Apple by editing Raw.plist . This worked perfectly (since the RAW files are identical for A200 and A2).
With Camera Raw update 2.2 onwards this trick does not work anymore. The syntax and I also think the OS internal handling of Raw files did change. Worse, Mac OSX 10.5.6 seems to need Camera Raw >2.1 . So staying with the old Camera Raw package does not work.
Of course I don´t want to blame Apple for breaking a hack, but since the beginning I never understood, why Apple does not support a identical camera model!
Has anybody similar issues or a hint how to proceed? (without going to .dng)
Best regards
Joe

Hi all,
I contacted Konica Minolta tech support and they confirmed that the A200 is supported under Tiger (10.4) and should also work with iPhoto. Here's the email I received:
"The camera will work on OS Tiger but we cannot comment on iPhoto as it is not one we have tested it on however we provide software called DiMAGE Viewer which will work with the camera. We have many customers using the camera with Tiger with no issues."
I then found the following Mac OS compatibility info on Konica's tech support site:
http://www.konicaminoltaphotoworld.com/kmsupport.com/Compatibility.3036.0.html?& L=0#).
To summarise, Konica state that Mac OS 10.1 - 10.3 are fully supported and limited testing has shown that 10.4 works as well. There's no mention of iPhoto compatibility. The document also mentions possible file corruption for transfers over 10 mins and issues with date and time info not being transferred to the Mac. I thought these were a tad worrying so I sent a follow-up email to Konica tech support. Here's the reply I received:
"It should work fine with Iphoto.The information regarding MAC OS X.
There can be corruptions with transfers of over 10mins but not necessarily and therefore it is recommend to split transfers and also the data and time may not be transferred correctly and these I am afraid are issues which should be resolved when newer DiMAGE Software is released, however they might not occur at all and is only a precaution."
So... it's all a bit vague. Seems like it will definitely work with OS 10.4 but you might get some of the problems mentioned above... and then again you might not! Also, in the above reply, Konica mention that these issues should be fixed in a new version of their DiMAGE software. So maybe these issues don't occur if you just use iPhoto? Who knows....
I'm still trying to decide whether the A200 is the camera for me.
Cheers,
Stuart

Help render the raw files edited with camera raw how?

Hi
i have a problem
i use bridge cs5 (updated) to browse my raw files
often i open my raw files with camera raw inside bridge cs5 and make some corrections like exposure , saturation , contrast and so on
but after bridge doesn't re-render the files
i mean the thumbs ,previews , the slideshow still are in default setting
when i click and open with camera raw inside bridge or with photoshop cs5 ,the raw files look with corretions
but again bridge show me not with the corrections
i run under w7 32bit
what could be the problem?
thanks

mantralightroom wrote:
i see previews and thumbs with the edits but with a big delay
thanks
If you are using HQ On Demand you will get fast thumbnails, but there will be a delay in generating the preview as Bridge builds it.
The Always HQ takes more space, but faster as the data is already in cache.
Hope this helps.

Has anyone else had problems with their RAW editing window?

I'm having real problems with my RAW editing window (the one that automaticaly pops up when you open a raw file). I've opened several images, but when I click on the different thumbnails on the left hand side the large preview image in the center doesn't change. Obviously I need to be able to see this to make the required changes.
Any ideas/help you be greatly appreciated!!!

Hi Kate,
I haven't yet been able to replicate your problem. Will you please describe your workflow? Are you simply selecting multiple files from your computer and double clicking to automatically open in Camera RAW?
Also curious, with all of your images open in the RAW editing window, what happens when you use the arrows near the bottom right? Does your image change?
Cheers,
Michael

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt available anymore in the plugin list. Tried to reinstall everything for a few times, but nothing helps.

When I search for updates the raw converter doesnt get update automaticly. Frustrating, is costing me the whole morning.

Problem with Camera Raw

Similar Messages

Maybe you are looking for