Problem with Canon Printer and Leopard

I have a Canon Ink-Jet (Pixma IP 4200) printer, which, until two days ago was running fine.
Since then, I've been unable to print on it - either I get the error message that the printer is out of paper, when it isn't, or that the computer cannot connect with the printer.
I've tried uninstalling the printer, and re-installing it, both with the Canon drivers, and with the Gutenprint ones, but to no avail.
Not only that, but when the printer is connected via the Canon drivers, either wirelessly, or via USB, then my MacBook fan starts to run all the time, very loudly. Once I delete the printer again, then the MacBook becomes silent within thirty seconds.
Weird, huh?
Any ideas????

Try running a reset printing system. Open System Preferences > Print & Fax. Then hold down the Control key and click your mouse in the Printers list. A menu showing Reset printing system should appear. Click this.
Now restart your Mac and then add the Canon driver again. Hopefully this gets things working for you again.
PaHu

Similar Messages

Problems with HP printer and PSE 11 (was bill v)

When using my HP 7020e photosmart printer and Adobe photoshop elements 11, I get a very small white border on the prints. I have set for borderless printing. Adobe says the print size is 4.2 x 6.18 instead of 4 x 6. Any suggestions?

I had already set it to borderless but it still prints a very small white
border. HP had no solution. I am ready to send the printer back to them.
In a message dated 1/14/2014 5:47:22 A.M. Eastern Standard Time,
[email protected] writes:
Re: Problems with HP printer and PSE 11 (was bill v)
created by hyadav (http://forums.adobe.com/people/hyadav) in Photoshop
Elements - View the full discussion
(http://forums.adobe.com/message/6010537#6010537)

Problem with HP printer and Network

I recently purchased a MacBook Pro and HP 8600 wireless printer. I'm using an airport extreme base station.
I'm having trouble with network connectivity and wondered if the printer is the culprit--many times after printing, I lose my network connection completely.
I've tried updating base station software, computer software updates, re-booting the base station, etc., but nothing seems to permanently solve the problem.
Would appreciate any insights.
Thanks

Sounds like this could be an issue with the software. To start I want to be sure that we remove the software fully and correcty before we continue. Follow the instructions below and see what happens after.
First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
find and install the FULL FEATURE SOFTWARE if it is available :
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3692888
Install that and let me know the result!
Have a great day!
-Spencer
PS have a wonderful day and a fantastic weekend!

Airport Extreme - problem with usb printer and usb disk

I have Airport extreme with firmware 7.1. I try connect usb disk and usb printer with usb-hub to airport. I can't get disk or printer working. Also try connect only disk or printer without usb-hub to airport getting same problem. How I get disk and printer working with wireless network (windows pc computers)?
1)
My printer is HP PSC 1210 all-in-one ( http://h10025.www1.hp.com/ewfrf/wc/product?product=90764&lc=fi&cc=fi&dlc=fi&lang =fi&cc=fi&y=0&x=0 )
- printer seems working fine after installing bonjour printer installing wizard.
- I get error (in windows) when I try print document from word. Error only says "error printing" in status value.
- In airport utility all seems ok. Airport see usb printer "Hewlett-Packard psc 1200 series"
- printer protocol is RAW and driver manufacture HP (also try with microsoft driver)
2)
USB disk is Targa Databox II 250
- Airport utility says "Disk needs repair. Errors were found with a disk connected to your airport base station. please connect the usb disk to your mac or pc and use disk utility or another disk application to repair the disk"
- I have connected Targa usb disk to windows pc and run scandisk and defreg. No errors found in windows. Result..no help for airport

I have a similar problem to your second issue. Tried connecting a Netdisk to the USB port of the Airport Extreme and it also said there was a problem with the disk. Have performed a low level format on the disk and Airport Extreme still complained the disk had a problem.
After unplugging the disk, my route decided to stop allowing wireless connections even after rebooting. Ended up having to hard reset the Airport Extreme and reconfigure it with my old settings to work again.
FWIW, the first Airport Extreme I purchased today only worked on 802.11a and steadfastly refused to work on b/g so had to get a replacement. I suspect Apple's quality control is not quite as good as it used to be.

Problem with ticket printer and WPA2

Hi
I have a customer that have a couple of Datamax O'neil MP Compact4 MarkII ticket printers. It's two differents batches with different software version, one of them works perfect, but when I tried to configure the others, they just don't want to connect to the wireless. All settings are the same.
I use WPA2-PSK on the SSID, and it's also spesified on the printer that this is a PSK-SSID. I did run debug client on the controller and it gave me the output under.
I also tried to run it without any security at all, that worked fine. What I don't understand is why the controller tries to authenticate the client with 802.1x, it's not enabled at all at the controller. Does anyone see something that I don't?
Controller software 4.2.206,
Regards,
Patrick
Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Creating a PKC PMKID Cache entry for station 00:40:17:6b:76:6d (RSN 2)
Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Adding BSSID 00:25:46:83:4f:42 to PMKID cache for station 00:40:17:6b:76:6d
Mon Sep 12 13:23:42 2011: New PMKID: (16)
Mon Sep 12 13:23:42 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Initiating RSN PSK to mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d dot1x - moving mobile 00:40:17:6b:76:6d into Force Auth state
Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Skipping EAP-Success to mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:42 2011: Including PMKID in M1 (16)
Mon Sep 12 13:23:42 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Sending EAPOL-Key Message to mobile 00:40:17:6b:76:6d
                                                                                                    state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Received EAPOL-Key from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Received EAPOL-key in PKT_START state (message 2) from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d EAPOL-key M2 with invalid RSN IE received from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Sent Deauthenticate to mobile on BSSID 00:25:46:83:4f:40 slot 0(caller 1x_eapkey.c:907)
Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Scheduling deletion of Mobile Station: (callerId: 58) in 10 seconds
Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Association received from mobile on AP 00:25:46:83:4f:40
Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d STA - rates (8): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d STA - rates (12): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Processing RSN IE type 48, length 20 for mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Initializing policy
Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:25:46:83:4f:40
Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d apfPemAddUser2 (apf_policy.c:212) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Stopping deletion of Mobile Station: (callerId: 48)
Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Sending Assoc Response to station on BSSID 00:25:46:83:4f:40 (status 0)
Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d apfProcessAssocReq (apf_80211.c:3888) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Creating a PKC PMKID Cache entry for station 00:40:17:6b:76:6d (RSN 2)
Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Adding BSSID 00:25:46:83:4f:42 to PMKID cache for station 00:40:17:6b:76:6d
Mon Sep 12 13:23:44 2011: New PMKID: (16)
Mon Sep 12 13:23:44 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Initiating RSN PSK to mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d dot1x - moving mobile 00:40:17:6b:76:6d into Force Auth state
Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Skipping EAP-Success to mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:44 2011: Including PMKID in M1 (16)
Mon Sep 12 13:23:44 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Sending EAPOL-Key Message to mobile 00:40:17:6b:76:6d
                                                                                                    state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d 802.1x 'timeoutEvt' Timer expired for station 00:40:17:6b:76:6d
Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d Retransmit 1 of EAPOL-Key M1 (length 121) for mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d Received EAPOL-Key from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d Received EAPOL-key in PKT_START state (message 2) from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d EAPOL-key M2 with invalid RSN IE received from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d Sent Deauthenticate to mobile on BSSID 00:25:46:83:4f:40 slot 0(caller 1x_eapkey.c:907)
Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d Scheduling deletion of Mobile Station: (callerId: 58) in 10 seconds
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Association received from mobile on AP 00:25:46:83:4f:40
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d STA - rates (8): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d STA - rates (12): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Processing RSN IE type 48, length 20 for mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Initializing policy
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:25:46:83:4f:40
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d apfPemAddUser2 (apf_policy.c:212) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Stopping deletion of Mobile Station: (callerId: 48)
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Sending Assoc Response to station on BSSID 00:25:46:83:4f:40 (status 0)
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d apfProcessAssocReq (apf_80211.c:3888) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Creating a PKC PMKID Cache entry for station 00:40:17:6b:76:6d (RSN 2)
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Adding BSSID 00:25:46:83:4f:42 to PMKID cache for station 00:40:17:6b:76:6d
Mon Sep 12 13:23:50 2011: New PMKID: (16)
Mon Sep 12 13:23:50 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Initiating RSN PSK to mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d dot1x - moving mobile 00:40:17:6b:76:6d into Force Auth state
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Skipping EAP-Success to mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:50 2011: Including PMKID in M1 (16)
Mon Sep 12 13:23:50 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Sending EAPOL-Key Message to mobile 00:40:17:6b:76:6d
                                                                                                    state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Received EAPOL-Key from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Received EAPOL-key in PKT_START state (message 2) from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d EAPOL-key M2 with invalid RSN IE received from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Sent Deauthenticate to mobile on BSSID 00:25:46:83:4f:40 slot 0(caller 1x_eapkey.c:907)
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Scheduling deletion of Mobile Station: (callerId: 58) in 10 seconds
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Association received from mobile on AP 00:25:46:83:4f:40
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d STA - rates (8): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d STA - rates (12): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Processing RSN IE type 48, length 20 for mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Initializing policy
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:25:46:83:4f:40
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d apfPemAddUser2 (apf_policy.c:212) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Stopping deletion of Mobile Station: (callerId: 48)
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Sending Assoc Response to station on BSSID 00:25:46:83:4f:40 (status 0)
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d apfProcessAssocReq (apf_80211.c:3888) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Creating a PKC PMKID Cache entry for station 00:40:17:6b:76:6d (RSN 2)
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Adding BSSID 00:25:46:83:4f:42 to PMKID cache for station 00:40:17:6b:76:6d
Mon Sep 12 13:23:52 2011: New PMKID: (16)
Mon Sep 12 13:23:52 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Initiating RSN PSK to mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d dot1x - moving mobile 00:40:17:6b:76:6d into Force Auth state
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Skipping EAP-Success to mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:52 2011: Including PMKID in M1 (16)
Mon Sep 12 13:23:52 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Sending EAPOL-Key Message to mobile 00:40:17:6b:76:6d
                                                                                                    state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Received EAPOL-Key from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Received EAPOL-key in PKT_START state (message 2) from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d EAPOL-key M2 with invalid RSN IE received from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Sent Deauthenticate to mobile on BSSID 00:25:46:83:4f:40 slot 0(caller 1x_eapkey.c:907)
Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Scheduling deletion of Mobile Station: (callerId: 58) in 10 seconds
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Association received from mobile on AP 00:25:46:83:4f:40
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d STA - rates (8): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d STA - rates (12): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Processing RSN IE type 48, length 20 for mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Initializing policy
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:25:46:83:4f:40
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d apfPemAddUser2 (apf_policy.c:212) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Stopping deletion of Mobile Station: (callerId: 48)
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Sending Assoc Response to station on BSSID 00:25:46:83:4f:40 (status 0)
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d apfProcessAssocReq (apf_80211.c:3888) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Creating a PKC PMKID Cache entry for station 00:40:17:6b:76:6d (RSN 2)
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Adding BSSID 00:25:46:83:4f:42 to PMKID cache for station 00:40:17:6b:76:6d
Mon Sep 12 13:23:53 2011: New PMKID: (16)
Mon Sep 12 13:23:53 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Initiating RSN PSK to mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d dot1x - moving mobile 00:40:17:6b:76:6d into Force Auth state
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Skipping EAP-Success to mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:53 2011: Including PMKID in M1 (16)
Mon Sep 12 13:23:53 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Sending EAPOL-Key Message to mobile 00:40:17:6b:76:6d
                                                                                                    state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Received EAPOL-Key from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Received EAPOL-key in PKT_START state (message 2) from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d EAPOL-key M2 with invalid RSN IE received from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Sent Deauthenticate to mobile on BSSID 00:25:46:83:4f:40 slot 0(caller 1x_eapkey.c:907)
Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Scheduling deletion of Mobile Station: (callerId: 58) in 10 seconds
Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d Association received from mobile on AP 00:25:46:83:4f:40
Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d STA - rates (8): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d STA - rates (12): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d Processing RSN IE type 48, length 20 for mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Initializing policy
Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:25:46:83:4f:40
Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d apfPemAddUser2 (apf_policy.c:212) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d Stopping deletion of Mobile Station: (callerId: 48)
Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d Sending Assoc Response to station on BSSID 00:25:46:83:4f:40 (status 0)
Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d apfProcessAssocReq (apf_80211.c:3888) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated

Hi Patrick,
It looks like that client is actually trying to do wpa vs wpa2:
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Received EAPOL-key in PKT_START state (message 2) from mobile 00:40:17:6b:76:6d
Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d EAPOL-key M2 with invalid RSN IE received from mobile 00:40:17:6b:76:6d
change/add that wlan to wpa/tkip and see if that works. if it does, and you've got the ticket printer configured for wpa2, there's a problem with it (maybe it needs to be rebooted for wpa2/aes to take affect? just a guess)

Problem with Dell Printer and Wireless Router

I have a new Linksys Wireless Router (3100) and it handles 3 laptops, PS3 fine. But I have a Dell 715w network printer (also new). I have it set up on the network, and it works fine upon setup. The problem is the printer does not work all the time. Sometimes I can get an error message, sometimes it says it is busy, and other times it literally takes a long time to load and then does not print. I usually can get it to work again by rebooting and turning off the router and printer and laptops, but this hit or miss is very annoying and I never know when it will do this again, usually after a week or two. I wonder if the problem is that the 3 laptops all have different OS - XP, Vista and Windows 7. Dell tech support won't help as they say they don't support routers, but I am wondering whether the problem is ina s etting or if this printer is malfunctioning. any help would be appreciated

Yes. You have to key-in the IP address to the printer.
Basically, if the printer is set to obtain IP address from the router, it will be provided with a random IP or any IP available for the next device that will connect, on this issue, your printer. So there's no permanent IP address for the printer, making it a little hard to find at times. Compare it with the a static IP, your computer can easily map it since it doesn't change.

Monitor problems with Mac Pro and Leopard

I can't turn energy saver off.I have two LCD monitors connected, one 19" Viewsonic VX924 and one 30" Dell3007WFPHC . I set energy saver:Put the display(s) to sleep when computer is inactive for Never.
Yet I can turn the monitors off and back on later and it's put the Viewsonic to sleep ,but not the Dell.
I then open the energy saver system preferences again and low and behold it's changed itself back to sleep at 26 minutes.Ghost in the machine?Why doesn't it put the Dell to sleep as well?????Why does it keep changing back to 26 minutes regardless of how many times I set it to never and lock it?
I even tried just using the Viewsonic only and setting to never,I also trashed a pref file I thought was energy saver , still same behavior, this is a REALLY big hassle ,because I have to restart every time just to get this monitor back up.
Any clues?
Many thanks!
Hayes
Memphis,Tn.

I think there are some powermanagement prefs in your account and in /Library but I also read of problems with ViewSonic VX back when the Mac Pro came out in 9/06.
I would give the SMC button a good 'kick' and see if that helps.
And when you restart, this is normal safe restart, or forced?
SMC button, this is restart button on the inside of the mac?
It's always a safe restart,the whole computer doesn't go down, it's just the viewsonic power light blinks on and off and there is not much I can do to get back up quickly, but restart. I have played with display settings and got it back before, but that's hit or miss and very time consuming.
Thanks you so so much for your help and suggestions!

Having problems with HP6980 printer and Windows 7, please help

I just replaced my XP computer with a new HP computer running Windows 7. Each time I turn on my HP 6980 printer, it won't print. When I go to Devices and Printers, I see that it is offline. I have to delete the printer and reinstall it to make it work and this solution is only good for the session. I have to repeat the process each time that I turn on the computer. Please help.

Try running this next time you get the issue:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91788-1&lc=en&dlc=en&cc=us&...
This should fix the offline issue instead of reinstalling.
I work for HP but my posts and replies are my own thoughts.
If I have solved your issue, please feel free to provide kudos
Make it easier for other people to find solutions, by marking my answer with Accept as Solution if it solves your issue.

Printing problems with Canon MP600R (and zathura)

Hi, I've been trying to get my printer working properly. I've installed cups according to the wiki article, and adding the printer worked as expected. This is where I'm at: When printing from zathura, the resulting page is really low resolution. When printing to cups-pdf from zathura, the resulting PDF is of very low resolution. However, when using
lp -d Virtual_PDF_Printer test.pdf
the resulting PDF is just fine. When printing with
lp -d Canon_MP600R test.pdf
the page is much better in resolution, but still not ideal. Also, it seems that the font comes out too bold?!
However, the cups test page I've printed looks fine to me.
Not sure if this is related, but sometimes the printer does not react to a print job, and /var/log/cups/error_log contains lines like this:
Got USB transaction timeout during write.
Thanks in advance
Last edited by Psirus (2013-08-09 15:27:58)

Not sure, but I think I read that some users had issues printing pdf's without adobe reader installed.

Problem with iphoto, printer, and toast

Can someone direct me to a discussion on this topic. I seem to have a driver problem or something...when I go to print anything, from any program, said program crashes.
Toast titanium won't open properly, and then won't even force quit no matter what I do.
Iphoto won't add to library anymore.
My Sibelius lost all it's fonts, and I'm sure there are a few more things I haven't even noticed yet. They all happened at the same time which is why I reckon they're all the same problem.
I'm running an Imac g5, so I know it's old! Also- I cannot locate the original cds that would let me do a reinstallation. Is there somewhere I can get them?
Oh I hope someone somewhere still running pre intel reads this.
Colm
(near Dublin in Ireland)

Try running a reset printing system. Open System Preferences > Print & Fax. Then hold down the Control key and click your mouse in the Printers list. A menu showing Reset printing system should appear. Click this.
Now restart your Mac and then add the Canon driver again. Hopefully this gets things working for you again.
PaHu

Problem with Epson Printer and Time Capsule

I have a new Time Capsule, already gone through first backup etc... I tried to connect my 2 month old Epson RX 680 to the TC via USB. I have tried everything and still cannot print wirelessly. I have uninstalled, reinstalled, rebooted both TC and printer, running out of ideas. Any suggestions why I can't print wirelessly?
BTW, works fine with USB from printer directly into macbook pro.

I attempted this routine with my Epson R380 and this did not help. I do have a working HO OfficeJet 6210xi working off Time Machine. I'm wondering if an expert with CUPS can help determine the problem from the logs?
I [07/Feb/2009:23:43:20 -0500] [Job ???] Request file type is application/postscript.
I [07/Feb/2009:23:43:20 -0500] [Job 12] Adding start banner page "none".
I [07/Feb/2009:23:43:20 -0500] [Job 12] Adding end banner page "none".
I [07/Feb/2009:23:43:20 -0500] [Job 12] File of type application/postscript queued by "mikenned".
I [07/Feb/2009:23:43:20 -0500] [Job 12] Started filter /usr/libexec/cups/filter/pstoappleps (PID 22327)
I [07/Feb/2009:23:43:20 -0500] [Job 12] Started filter /usr/libexec/cups/filter/pstocupsraster (PID 22328)
I [07/Feb/2009:23:43:20 -0500] [Job 12] Started filter /Library/Printers/EPSON/InkjetPrinter/Filter/rastertoescp.app/Contents/MacOS/ra stertoescp (PID 22329)
I [07/Feb/2009:23:43:20 -0500] [Job 12] Started backend /usr/libexec/cups/backend/mdns (PID 22331)
W [07/Feb/2009:23:43:21 -0500] [Job 12] recovered:
I [07/Feb/2009:23:43:32 -0500] [Job 12] Completed successfully.

Problems with canon printer (was 38gil2140)

printing photos using photoelements 12 on canon ip 100 printer results in faded (washed out) colors can any one help?

Thanks for trying the new cable. At least now it can be ruled out as a cause. This result would then suggest the printer at fault but with it working on Windows then it would also rule it out.
So like you I don't know why the MF is not appearing in System Information. For your reference I have taken a screen grab of my System Information view showing the MF4580 connected to the USB High-Speed Bus.
Was 10.8 a new installation on this Mac or was it an upgrade from 10.7/10.6?
Do you know anyone with a Mac? It would be interesting to check what happens with that Mac. You would not need to install the driver. Just connect it via USB and then open System Information.

Problems with HP Printer and Computer

Why does my computer fail to connect my printer? The computer says the printer is connected when it is not and the printer spooler keeps disconnecting? Please help.

Hi @mommacat,
Welcome to the HP Forums!
I understand that you are having troubles connecting your HP Deskjet 1010 to your Windows 8 computer. I am happy to help!
I am assuming you are connecting with a USB 2.0 printer cable, since the printer's specifications states this is the only method of connecting available.
In the meantime, I would recommend to go through this guide, 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print: Windows 8, and watch this video:
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Having a problem with ilife 08 and leopard screen saver

Hi,
Not sure if this is an osx leopard issue or a ilife 08 issue but before I did the upgrade I was able to use my entire iphoto library as random photos in the screensaver. Not it only let's me choose specific events or last import. it does not let me select the entire iphoto library?
Any ideas on this?

In System Preferences/Screen Saver, you need to go down the list past all the Events and you will see a listing titled "Photos" just above the item titled "Last 12 Months". Select it and you will see the entire iPhoto Library there.
Message was edited by: Anastassios T
Message was edited by: Anastassios T

Problems with Security Update and Leopard Re-Installation

I downloaded the new software update onto my Powerbook. When I restarted my computer, it got stuck at the loading screen. I did an Archive and Install and reverted back to Panther. Now I am trying to re-install Leopard, but the download will not start (it just says "calculating" but nothing happens). I think the security update messed up my system and I want to know what I should do.

Alex Kramer wrote:
I downloaded the new software update onto my Powerbook. When I restarted my computer, it got stuck at the loading screen. I did an Archive and Install and reverted back to Panther.
I presume you were not using TimeMachine.
Now I am trying to re-install Leopard, but the download will not start (it just says "calculating" but nothing happens). I think the security update messed up my system and I want to know what I should do.
What "download" are you referring to? A Leopard update? Which one.

Problem with Canon Printer and Leopard

Similar Messages

Maybe you are looking for