Problem with certificates for secure sites since 10.5.2 update
Since the 10.5.2 update I am suddenly getting warnings about certificates of some sites, but not all. However, these sites worked without warning before the update, and the certificates are signed by trusted authorities.
The only difference that I can see, is that when checking the certificate details, that when the site is giving warnings, I only see the site certificate, and when sites are trusted, I see a whole tree of certificates.
So far I have not had much luck in researching the issue on the internet.
You can try removing and reinstalling a small program called EyeTV Helper, which is involved in detecting EyeTV on the FireWire/USB bus. Find the EyeTV Helper (located in your hard drive/Library/Application Support/EyeTV folder). Then, start the Activity Monitor (located in Applications/Utilities), and find EyeTV Helper in the list. Quit EyeTV Helper. Then, erase EyeTV Helper from your hard drive. Start EyeTV and it will be reinstalled. Does this help?
Similar Messages
-
i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me
i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me
-
Anyone else have problem with DVD player not working since 10.7.4 update
Tried to put digital copy of movie onto computer last night and kept getting error message about the disc wasn't supported. So tried one I already have on my computer and got same message. This is first time I've tried doing this since I updated. Any thoughts or advice would be greatly appreciated.
FWIW, my mighty mouse works w/o issues. See these:
http://support.apple.com/kb/TA26691
http://support.apple.com/kb/HT1537
http://discussions.apple.com/thread.jspa?threadID=1243940
http://www.macosxhints.com/article.php?story=20060210115417864 -
Problem with mail for exchange after update on E72...
Hi everyone,
I updated Nokia E-mail to ver 3.9 on E72. Now I am facing a problem with mail for exchange. I have configured gmail on mail for exchange. I recieve a warning that "unable to sync contact administrator if problem persist". It started to pop up just after the update was over and is very frustrating. Even previously i used to recieve mails instantly but now it generally takes half an hour for me to recieve them. I deleted and created mail for exchange several times but to no avail.
Also i am not able to automatically recieve mails other emails which i have configured. every time I have to manually download them everytime.
Can anybody suggest a way out.
Thanks
AnilIt could be a problem if you're using your network's connections...
I was on a Pay & Go tariff with o2 some time ago, and needed secure connections for various things, o2 told me they didn't provide secure connections on Pay & Go tariffs...
Could be worth checking with them to make sure it's supported.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5 -
Firefox has problems with images.
In sites like deviantART or ImageShack with full-view option, images that are not in full size/thumbnails get slightly pixelated e.g. http://img251.imageshack.us/f/screenshot2tq.jpg/
Long images get completely messed up if full-viewed e.g. http://img689.imageshack.us/f/screenshot5z.jpg/ (though if the file is only big, it loads just fine)
Also, thumbnails in some sites get messed up e.g. http://img201.imageshack.us/f/screenshotyr.jpg/
And in general, Firefox has more 'glitches' like not allowing to add more search engines. It wasn't like that before and I can only assume that it got messed up somewhere with updates, but I'm not really sure.
I've tried cleaning out cache, re-installing Firefox (multiple times) and even downloaded Firefox 4 beta, but the problem remains.
I use Ubuntu.
Does anyone else have similar problems? Or know where the problem lies?Do you have the latest driver for your graphics display card?
Create a new profile as a test to check if your current profile is causing the problems.
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
i have been requested the certificate for IOS Development since 4 days ago, but the result is still pending approval. So how many days should i wait?
1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now? -
Can't sign adobe html5 extension - problem with certificate
1. I want to package my html extension for photoshop CC.
2. I have tried to use ZXPSignCmd to build and sign extension package.
3. For self-signed certificate it works.
4. Now we bought root signed certificate from GlobalSign but ZXPSignCmd fails when we try to use it:
Output from ZXPSignCmd:
Unable to build a valid certificate chain. Please make sure that all certificates are included in the certificate file.
We are sure that our certificate & password are correct (inside .p12 file we have 3 certs - root, intermediate and ours).
We tried to use Adobe packaging tools: Configurator / Packager and each of them returns error that there is a problem with certificate. On the other side I was able to use ucf.jar to package another plugin with our certificate - so certificate is correct I guess.
How we can package HTML5 Extension with manifest.xml and sign it with our certificate for Photoshop CC?
We are trying to solve this for few hours so far but nothing seems to work...
Please help.I know this is a late reply, but I thought I would chime in as I was getting the same "Unable to build a valid certificate chain. Please make sure that all certificates are included in the certificate file." error with our new Comodo code signing certificate.
I originally received the code-signing certificate from Comodo as a .p7s file by downloading it from Comodo using Safari on Mac OS X Mavericks. I then imported it into Keychain Access (KA) by double-clicking the .p7s file after it was downloaded. From KA, I selected all of the certificates in the chain (by command-clicking each cert) and then exported them as single .p12 file.
When using this the KA generated .p12 file I got the "certificate chain" error when using the ZXPSignCmd or ucf.jar tool. After way too many hours of head scratching, I decided to import the .p12 file created from KA into FireFox on Mac (v33.0.2) and re-export it from there. To import the .p12 into FireFox go to the import dialog: FireFox > Preferences > Advanced > Certificates Tab > View Certificates Button > Your Certificates Tab > Import Button. Once imported, export it back out as a .p12 file using the "Backup" button in the same dialog box. Yes, you are importing the .p12 just to re-export it as a .p12!
Using the FireFox created .p12 works without error when using ZXPSignCmd and ucf.jar. I don't know if this a Keychain Access issue or if Adobe is just picky about how the .p12 file is created, but having FireFox do the .p12 creation worked for me.
I hope this helps!
-- Jim Birkenseer
www.premediasystems.com -
Does anyone have problems with hotspot connections or WLAN since they have installed Lion?
Does anyone have problems with hotspot connections or WLAN since they have installed Lion?
Same problem for me: Since update to Lion my WLAN connection to my router (AVM fritz!box fon 7141) get's lost almost every time the computer is on idle for a couple of minutes. Deactivating and reactivating helps, but of course only until the problem occurs again.
BTW: I'm running Mac OS X Lion (10.7.3) on a iMac 27" 3.2 GHz i3 (mid 2010 model).
I'm really annoyed by this problem and looking forward for APPLES fix. -
Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3
Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3. Flash palyer 10.2 was the last version without the listed problems.
For anyone interested you may see here what 'ringing artifacts' means : http://en.wikipedia.org/wiki/Ringing_artifact
More about Image artifacts/errors related to video scaling here : http://en.wikipedia.org/wiki/Video_scaler
Test configuration :
Windows 7 x64
Intel HD Graphics with lastest available drivers from manufacturer.
Any solution from Adobe?Could you please open a new bug report on this over at bugbase.adobe.com? Please post back with the URL so that others affected can add their comments and votes.
Thanks,
Chris -
Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem next time it launches". Except that it doesn't, I keep getting the same message and the program closes. Does anyone know what I can do to repair it? Can't back up, can't do anything.
There are dozens of threads in this forum that describe the fix
-
hello guy! I've got a problem with facetime for mac.My sister has a I-pod touch fourth generation with factime but i cna't phone her a message come on my mac.It say "xxx can't receive facetime's calls"!Can you help me??
Thanks, Dah•veed.
I did see mention of using Google Public DNS while I was searching the forums prior to posting, but to be honest didn't think it was a DNS-related problem.
However, to rule it out I've set the prefered DNS servers on my router to Google's, but FaceTime still disconnects after 4-5 seconds when calling between me and my brother-in-law. It doesn't matter who initiates the call.
As a test, before I made the changes to my router, I logged into FaceTime as him on my MBP and tried calling myself on my iMac, and that was successful.
The same test between the two iMacs when they were here was unsuccessful, so now I'm definitely thinking it's something on the '08 iMac.
Now I just need to figure out what... -
Problem with Twitter for Mac notifications
Hello,
I have a strange problem with Twitter for Mac. On both my home and office Macs. New posts appear in app window but there aren't any notifications even though notifications are set in preferences to show in both dock and menubar. Perhaps anyone noticed similar strange behaviour? I didn't find anything similar on Twitter forums.
Thanks in advance.Solved by
Dr.AvituvOct 20, 2014 11:09 PM
go to Terminal and post this:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/support/lsregister -kill -seed
if it doesn't have that specific directory try this:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -seed
once the scanning is done (can be short or long, depends on how heavy your system is) RESTART the computer.
when you're back, go to Apple>system preferences>extensions.... guess who's there.
I hope it helped.
The Doctor.
iMac, OS X Yosemite (10.10)
To restore Actions extensions for good and other stuff
THANKS! -
Problem with GarageBand for iOS 6/7 Iphone 3gs / 4
Problem with GarageBand for iOS 6/7 Iphone 3gs / 4
Hello,
On February 16, bought the GarageBand for iOS which was free and so I find and install it on my 3GS .
Take the demo: Curtain Call Demo
and within the instruments :
audio Recorder
Sampler
Smart Drums
Smart Strings
Smart Bass
Smart Keyboard
Smart Guitar
Keyboard
Drums
Guitar Amp
1.4.1 is the latest version for ios 6.
Configure my AppleID on a Iphone 4 and install the program , the version I have the Iphone 4 is the orange ( different from 3gs ) icon and put it on the AppStore : ios 2.0.1 for ios7.
With these instruments :
audio Recorder
Sampler ( to download the instrument )
Smart Drums ( to download the instrument )
Smart Strings (Download the instrument )
Smart Bass ( to download the instrument )
Smart Keyboard ( to download the instrument )
Smart Guitar
Keyboard
Drums
Guitar Amp ( to download the instrument )
and if I give what I need to restore tells me if I bought it I did not restore anything and tells me to buy :
Complete collection of GarageBand instruments and sound at a price of : € 4.49
As they are 2 different versions ? More than anything I say because I have to pay for the instruments in the 2.0.1 version of the Iphone 4 ... ?
And besides not wearing demo Demo Curtain Call : (
GarageBand 1.x If you are upgrading it using iTunes on a Mac or PC, you can restore the original collection of instruments and sounds. There is no need to buy this collection. Press "You've already purchased?" When displayed on iPhone, iPad or iPod touch.
this puts on the AppStore but I have tried to restore as I wrote above, and does not work. There is nothing to restore.
regardsI've been having the same problem. However, I believe my problem is due to the 3G issues I've been having. I don't have internet access even when the 3G symbol appears, so probably my iphone keeps trying to connect to the network and has its battery drained! Have you been having the same issue?
-
Stacked 100% bar chart - Problem with datatips for zero value data points
I have a stacked 100% bar chart that shows datatips in Flex 4. However, I don't want it to show datatips for
data points with zero values. Flex 4 shows the datatip for a zero value data point on the left side of a bar if the data point is not the first in the series.
Here's the code that illustrates this problem. Of particular concern is the July bar. Because of the zero value data point problem, it's not possible to see the datatip for "aaa".
Any ideas on how we can hide/remove the datatips for zero value data points ? Thanks.
<?xml version="1.0"?>
<s:Application
xmlns:fx="
http://ns.adobe.com/mxml/2009"xmlns:mx="
library://ns.adobe.com/flex/mx"xmlns:s="
library://ns.adobe.com/flex/spark"creationComplete="initApp()"
height="
1050" width="600">
<s:layout>
<s:VerticalLayout/>
</s:layout>
<fx:Script><![CDATA[
import mx.collections.ArrayCollection;[
Bindable]
private var yearlyData:ArrayCollection = new ArrayCollection([{month:
"Aug", a:1, b:10, c:1, d:10, e:0},{month:
"July", a:1, b:10, c:10, d:10, e:0},{month:
"June", a:10, b:10, c:10, d:10, e:0},{month:
"May", a:10, b:10, c:10, d:0, e:10},{month:
"April", a:10, b:10, c:0, d:10, e:10},{month:
"March", a:10, b:0, c:10, d:10, e:10},{month:
"February", a:0, b:10, c:10, d:10, e:10},{month:
"January", a:10, b:10, c:10, d:10, e:10}]);
private function initApp():void {}
]]>
</fx:Script>
<s:Panel title="Stacked Bar Chart - Problems with DataTips for Zero Value Items" id="panel1">
<s:layout>
<s:HorizontalLayout/>
</s:layout>
<mx:BarChart id="myChart" type="stacked"dataProvider="
{yearlyData}" showDataTips="true">
<mx:verticalAxis>
<mx:CategoryAxis categoryField="month"/>
</mx:verticalAxis>
<mx:series>
<mx:BarSeries
xField="a"displayName="
aaa"/>
<mx:BarSeries
xField="b"displayName="
bbb"/>
<mx:BarSeries
xField="c"displayName="
ccc"/>
<mx:BarSeries
xField="d"displayName="
ddd"/>
<mx:BarSeries
xField="e"displayName="
eee"/>
</mx:series>
</mx:BarChart>
<mx:Legend dataProvider="{myChart}"/>
</s:Panel>
<s:RichText width="700">
<s:br></s:br>
<s:p fontWeight="bold">The problem:</s:p>
<s:p>Datatips for zero value data points appear on left side of bar (if data point is not the first point in series).</s:p>
<s:br></s:br>
<s:p fontWeight="bold">For example:</s:p>
<s:p>1) For "June", eee = 0, mouse over the left side of the bar to see a datatip for "eee". Not good.</s:p>
<s:br></s:br>
<s:p>2) For "July", eee = 0 and aaa = 1, can't see the datatip for "aaa", instead "eee" shows. Real bad.</s:p>
<s:br></s:br>
<s:p>3) For "Feb", aaa = 0, datatip for "aaa" (first point) does not show. This is good.</s:p>
<s:br></s:br>
<s:p>4) For "Mar", bbb = 0, datatip for "bbb" shows on the left side of the bar. Not good.</s:p>
<s:br></s:br>
<s:p fontWeight="bold">Challenge:</s:p>
<s:p>How can we hide/remove datatips for zero value data points?</s:p>
<s:br></s:br>
</s:RichText></s:Application>FYI.
Still have the issue after upgrading to the latest Flex Builder 4.0.1 with SDK 4.1.0 build 16076.
Posted this as a bug in the Adobe Flex Bug and Issue Management system. JIRA
http://bugs.adobe.com/jira/browse/FLEXDMV-2478
Which is a clone of a similar issue with Flex 3 ...
http://bugs.adobe.com/jira/browse/FLEXDMV-1984 -
I have problems with office for mac screen resolution, specially with excel
I have problems with office for mac screen resolution, specially with excel ?
For starters, make sure to Check for Updates on any of the Help menus, and make sure the product has all the latest patches. MS did come out with a patch addressing the display issues on Retina Macs. Latest patchlevel is 14.3.2.
We are talking about Office:Mac 2011, right?
Maybe you are looking for
-
Hi experts, Need help with IDOC. I'm creating 2 FM to process an existing idoc. first FM will use the data from idoc 1 to populate EDIDD for idoc 2. second FM will use the data from idoc 2 to populate EDIDD for idoc 3. when during processing, I encou
-
IPod not found by computer or iTunes
about a month ago my iPod nano (3rd gen) just stoppoed working out of know where, and then all of sudden it came back on about two weeks later. Ever since then it has not showed up in iTunes or as a device on my computer.
-
Can you connect a Time Capsule to Macbook with USB cable?
I have a 2nd generation TC that I was using as a storage device. I used to be able to connect to it wirelessly and send files there for storage. Now I can no longer do that. It does not show up in my devices. I also tried to hook up via USB and when
-
BAPI or FM to do update the batch, same as MB1B
Hi all I have a requirement to update the batch details say for some specific plants in Norway in one go. Same how we do using MB1B transcation. IS there any existing BAPI or FM to update the batch for the plants. cheers C
-
Hi, I am a java developer trying to understand Oracle. Here is my simple question: In oracle each login/user is associated with a tablespace (default) after login. My understanding is that this tablespace serves as the schema name for the db access.