Problem with Chart of depreciation-Urgent

Hi
while assigning chart of depreciation to company code,
The following message is coming
Inconsistency between FI company code XXX and chart of deprec. XXXX
Message no. AC481
Diagnosis
You tried to assign chart of depreciation XXXX to company code XXXX. According to its Customizing definition, this company code manages parallel currencies.
The chart of depreciation does not contain a corresponding depreciation area for each of the currency types that are defined in the company code.
System Response
This assignment is not possible.
Procedure
1. Check the currency types of the company code.
2. Specify a corresponding depreciation area for each currency type.</b>
Please help how toi solve
Thanks
tarak

Hi,
your problem (apparently) is that the Company Code manage 2 currencies, in this case, I think that you should configure a depreciation area in order to manage the valuation of the asset in the alternative currency. I think that SAP provides a standard depreciation area that you can copy.
I know that this is not a solution, but I hope this helps
Regards

Similar Messages

Problems with Charts

I make an application with Apex 2.2. It works fine.
I've tried to export app and import to Oracle XE.
It works but I've a problem with the charts: they are all empty!
For example, I make a cluster bar chart with one series:
select *
from table(cast(portal_pk_report_vendite.f_chart_shops_line(:P1_TIPI_ANALISI, 0,9,:APP_USER) as portal_table_graph))
The query call a procedure that return an object table with the following columns:
link
description
value
The chart is always empty.
If I manually force the parameters it works and data returned:
select *
from table(cast(portal_pk_report_vendite.f_chart_shops_line(40, 0,9,10) as portal_table_graph))
It seems that it's not able to passa values to chart.
Doing chart debug, items were correctly initialized.
It appens with all charts of any kind.
Any ideas?

I know that there aren't differences between Apex ad XEAndrea,
Oracle Application Express (APEX) is a hosted declarative development environment for developing and deploying database-centric Web applications. XE is a free version of the world's most capable relational database Oracle 10g Release 2 (10.2). So difference is huge!
APEX can run (depending on version) on different Oracle database editions (XE, SE, SEO and EE).
You have problem if your application running on APEX on XE and not if running on APEX on SE, SEO or EE. Am I right?
Question is does it really database (XE) making you problems with charts (what has not much sense to me) or APEX itself?

Problem With Chart (Members Name)

Hi Experts
We are facing the one new issue in FR as well as HFM. we are using the data bast to HFR is HFM.While we are creating the HFM application Profile we used the Period's Lables as January ,febuary.....,.we catching the same in HFR also it good.
But at one stage (trend reports) we have to generate the reports including with charts and both (*grid and Chart should be in one page only*). here we are facing the problem the report made up two col's (year & Period) and one row(Scenario).If we check the chart to show the Horizontal value like January 2007,February2007 and so on . so that the system will covers morespce and grid will moves next page but we need both in one single page.
Any suggestions on this Its cery Urgent
Regards
Rao

There are several options:
Try formatting that axis to have the month names at an angle.
Use the member name instead of description for months.
Don't show the year.
Change the axis that months are on, or pivot the grid (rows to columns).

Chart of depreciation(urgent)

Dear all,
While assigning chart of depreciation to company code, i am getting the following error. Please make me come out of this error.
Will assign points.
Thanks in advance,
Regards,
A.Anandarajan.
Company code entries for 3600 are incomplete - See long text
Message no. AC551
Diagnosis
The result of the check of company code 3600 shows that important global parameters from Financial Accounting are missing for Asset Accounting.
One or more of the following fields are affected:
     Currency
     Chart of accounts
     Fiscal year version
     Input tax indicator for non-taxable transactions
Procedure
You cannot use the company code for Asset Accounting without this information.
First complete these entries.

Hi Anand,
The solution is in the error message itself i.e
Input tax indicator for non-taxable transactions
Firstly you have to create tax codes for non taxable transaction in TR Code FTXP for the respective company code.
Secondly you have to assign these tax codes to your company code in TR code OBCL and save
Then You can proceed and do the assignment of Chart of Depreciation to the Company code.
I think this will solve the problem.
Regards
Pratiksha
*Please assign points if helpful

Problem with chart design

Hi
I am experiencing a problem with the output of a line chart that I am creating in APEX. Its labels (X-axis) are dates, but they do not seem to fit entirely into the lenght of the x-axis (all the ones that I have ordered in the sql expression). Also, I needed to place these dates in a vertical position, for which I cannot find any parameter. The sql is as follows:
select null link, DATA_REGISTO label, Total value
from (select DATA_REGISTO, TOTAL_SEQ_URGENCIA as Total FROM "ANDRE"."HTIDISTSIMPLIF"
where
DATA_REGISTO = '06.01.01'
or DATA_REGISTO = '06.01.08'
or DATA_REGISTO = '06.01.15'
or DATA_REGISTO = '06.01.22'
or DATA_REGISTO = '06.01.29'
or DATA_REGISTO = '06.02.05'
or DATA_REGISTO = '06.02.12'
or DATA_REGISTO = '06.02.19'
or DATA_REGISTO = '06.02.26'
or DATA_REGISTO = '06.03.05'
or DATA_REGISTO = '06.03.12'
or DATA_REGISTO = '06.03.19'
or DATA_REGISTO = '06.03.26'
or DATA_REGISTO = '06.04.02'
or DATA_REGISTO = '06.04.09'
or DATA_REGISTO = '06.04.16'
or DATA_REGISTO = '06.04.23'
or DATA_REGISTO = '06.04.30'
or DATA_REGISTO = '06.05.07'
or DATA_REGISTO = '06.05.14'
or DATA_REGISTO = '06.05.21'
or DATA_REGISTO = '06.05.28'
or DATA_REGISTO = '06.06.04'
or DATA_REGISTO = '06.06.11'
or DATA_REGISTO = '06.06.18'
or DATA_REGISTO = '06.06.25'
or DATA_REGISTO = '06.07.02'
or DATA_REGISTO = '06.07.09'
or DATA_REGISTO = '06.07.16'
or DATA_REGISTO = '06.07.23'
or DATA_REGISTO = '06.07.30'
or DATA_REGISTO = '06.08.06'
or DATA_REGISTO = '06.08.13'
or DATA_REGISTO = '06.08.20'
or DATA_REGISTO = '06.08.27'
or DATA_REGISTO = '06.09.03'
or DATA_REGISTO = '06.09.10'
or DATA_REGISTO = '06.09.17'
or DATA_REGISTO = '06.09.24'
or DATA_REGISTO = '06.10.01'
or DATA_REGISTO = '06.10.08'
or DATA_REGISTO = '06.10.15'
or DATA_REGISTO = '06.10.22'
or DATA_REGISTO = '06.10.29'
or DATA_REGISTO = '06.11.05'
or DATA_REGISTO = '06.11.12'
or DATA_REGISTO = '06.11.19'
or DATA_REGISTO = '06.11.26'
or DATA_REGISTO = '06.12.03'
or DATA_REGISTO = '06.12.10'
or DATA_REGISTO = '06.12.17'
or DATA_REGISTO = '06.12.24'
or DATA_REGISTO = '06.12.31'
order by DATA_REGISTO)
How can I do this?
Thanks in advance
Andre

Hi Frank,
I'm creating some SEM Management Cockpit, the problem I faced is not the BEx Query itself, but the pie chart design and display. I have processed my data in advance, so there a only 5 values in my query at a time, and these area values are not constant values. If I don't mark a selection criteria, it will display a full pie in Management Cockpit.
And if I browse the query in IE directory, I can get a desired pie chart by "Swap Axes", so I think maybe there is a same choose in Management Cockpit.
Thank you and Best Regards,
Rocket

Problem with chart width

Hi all,
I have a problem with a chart.
I show a columnChart at 100% width.
The dataprovider is hierarchic. So every object in it has a 'children' property which is a new ArrayCollections.
This way, I'm able to descend in the hierarchy by scripting this:
targetChart.dataProvider = myClickedItem.children;
All works perfect except that the larger the dataset is, the narrower my chart displays.
This is what it looks like (from left to right, the several levels of the chart):
This is the mxml code I use:
<mx:ColumnChart id="targetChart" width="100%" height="100%"
                                                  dataProvider="{targetProvider}" showDataTips="true"
                                                  itemClick="targetChart_itemClickHandler(event)"
                                                  type="{statStyle}">
<mx:horizontalAxis>
                                   <mx:CategoryAxis categoryField="label"/>
</mx:horizontalAxis>
<mx:series>
                              <mx:ColumnSeries yField="total" width="100%"
                                                                       fillFunction="getTotalFill"
                                                                       displayName="Totaal ovsg"
                                                                       showEffect="zoom" hideEffect="zoom"/>
                              <mx:ColumnSeries yField="count" width="100%"
                                                                       fill="{Config.CHART_COLOR_ARRAY.getItemAt(0) as IFill}"
                                                                       displayName="Telling"
                                                                       showEffect="zoom" hideEffect="zoom"/>
</mx:series>
</mx:ColumnChart>
Any help would be appreciated.
Dany

Hi,
Did you solve this issue?
I have the same problem, maybe you can help if you got the answer?

Problems with Charter Email Servers Made Me Think iOS5 Was Faulty

Just a little heads up here for someone who has been having problems with their Charter email accounts not pulling email to their iphones.
I decided to install iOS5 last weekend and my phone was being very irratic in pulling email from my Charter account starting a few days ago. Before calling Charter this morning I decided to delete the Charter account from my iphone and re-add it. I kept running into problems when trying to put in the exact same information that was there for the servers. I called Charter Tech Support and they kept blaming Apple.
So after some Googling I came with this posted yesterday.................
I have just spent a couple of hours with Charter Tech Support tracing a problem with their email POP settings. Many people had been using mail.charterinternet.com and smtp.charterinternet.com as a POP account in their settings. This server was decommissioned on Wednesday, 10/26/2011. These settings no longer work.
Charter advises on their website that you set the email up as an IMAP account and use mobile.charter.net. These settings work for me EXCEPT there is no option to leave the email on the server. If you check your email on your phone with these settings, the email will be deleted from the server.
Charter is aware of this issue, and are planning to make changes to allow people to connect via POP to Charter to get their email. I will post a response here as soon as they call me back with the settings.

I'm confused, how can it be a violation of Terms of Service to state problems I'm having with an App and concerns that it could be a scam? Surely it should be the other way round - that they have some kind of TOS to follow that stops them doing this!?
Like I said, I've tried contacting the developer and they aren't interested...I've also left negative feedback, but that achieves nothing. I've complained direct to Apple/iTunes, but they just refer me back to the developer.
I'll delete the contents of my original post as I don't want to get my account shut down if it is a breach of TOS, but that seems crazy and just gagging people who are trying to raise concerns I wasn't just ranting though, I was trying to find out how many other people are in the same boat as me - in the hope that if everyone gets together and complains then maybe something will be done!
Seems mad that developers can get away with doing whatever they like and I'm not allowed to even talk about it.
Edit: I can't see how to edit my original post?
Message was edited by: amethystar

Problems with my library! URGENT!

Hi guys,
So I've been running my library from my External Hard drive and I never have any problems with it. Today I opened my iTunes and tried to play a song and it said it could not be located. I located it and I thought it would automatically locate all my songs after locating one. However, it made me locate one by one which I've never come across before.
I went to preferences and advanced to make sure the location of the iTunes library was the external however it suddenly said C:Documents/My Music/iTunes/iTunes music. I never changed that and I don't know how it got changed all of a sudden. I figured if I set it back to the external harddrive it would work but again, it made me locate each song one my one. I don't know why its doing this, my XML file is still there and everything. After setting the location back to my external hard drive I tried adding a song to it to see where it would store and it went to My Documents/My Music.... Every tiem I re-open my iTunes the setting changes back to My Documents/ My music. I've been using iTunes from my external hard drive since the end of August and I have never came across this problem.
Does anyone know what I can do? I don't want to have to locate each song one my one, nor do I want to delete everything and re-add everything to my library as it will ruin playcounts, delete playlists etc. What can I do?
Thanks in advance!

Use Windows Device Manager to set it back to F:
These directions are for an ipod but will work for an exHD, too:
http://support.apple.com/kb/TS1493
Change the drive letter while itunes is closed. When you reopen itunes all the file paths should be OK.

Facing lot of problems with the DATA object -- Urgent

Hi,
I am facing lot of problems with the data object in VC.
1. I created the RFC initially and then imported the data object in to VC. Later i did some modifications to RFC Function module,and when i reload the data object, I am not able to see the new changes done to RFC in VC.
2. Even if i delete the function module, after redeploying the IVIew, results are getting displayed.
3. How stable is the VC?
I restarted the sql server and portal connection to R3 is also made afresh.... still i am viewing such surprise results..
please let me know what might be the problem.

Hi Lior,
Are u aware of this problem.
If yes, please let me know...
Thanks,
Manjunatha.T.S

Problem with chart/graph multiple scales

I have a chart with multiple scales. If I turn the visiblity off for some of the scales and then turn them back on they are not in the correct order on the chart. I have attached a program that I used to recreate the problem.
Please advise.
Thanks
Attachments:
Possible_bug.vi ‏36 KB

The only solution I can think of is to make all the scales invisible then make them visible in the order you want. I have modified your code to do this and added code to speed up the processing by disabling the front panel updates.
Attachments:
LV61_Possible_bug[1].vi ‏56 KB

Problem with chart : LV 7.1, 8.6 and 2010

Hello
I have a problem when I am trying to plot a 2d array in a chart with stacking plots. The LV crashes (the 2010 just disappears, 8.6 is saying that there is a problem...) . I get this problem on two different computers with all versions I have LV 7.1, 8.6 and LV 2010. Please find attached here a demo vi showing the problem (one for LV 8.6 and the same in LV 2010).
Run the vi, then select stacking plot, expand the Legends and try to write a name for the new Y scale (then please tell me what is going on).
thanks
N
Attachments:
test_2D.vi ‏10 KB
test_2D_LV10.vi ‏12 KB

Hello,
I don't understand what happen on your computer because I downloaded your vi (LV2010) and I followed the steps and I could change all the Y scale and all the others properties.
Could you try to run the different steps on a computer where only LabVIEW 2010 or LabVIEW 8.6 is installed?
David S.| Certified LabVIEW Associate Developer
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Journées Techniques LabVIEW 2012 : du 27 septembre au 22 novembre
2 sessions en parallèle : Débuter a...

Have a big problem with report. Very urgent please help

I have a report rep1. When I run the report via batch thru command rwclient to create a file it failed. I got the follwoing error message:
REP-0177: Error while running in remote server
Job 1413 is terminated due to connection timeout.
It does not even try for few seconds before gives this message. I ran some other batch reports whihc took 15 minutes and they were fine.
So, I stopped running the bad report for the day thinking the report is still not dead. I ran the same rep1 next day I still get the same error message. But this time when I ran I looked at the appserver showjobs (which lists the reports that were running and that already ran). The job number is different But still it fails in 3 seconds with the job number 1413 and connection time out. Can any one tell what might be the problem.
Any number of times I run this job I get the same job number with same error (all this is only if I run it as batch using rwclient). If I run this as online by calling it from a form it returns the results without any problems.
Please help. Very urgent.
Thanks in advance.
Asha

You might want to delete the report server .dat file and restart the server and try
his also could be one of the issues we had seen and fixed in 9.0.2.3. Please ensure you have the latest patch applied
Thanks
The Oracle Reports team

Problem with charts in VC

Hi All,
I am having a problem displaying data in charts. The process flow in my VC application is that user selects a location from the drop down then we call a model and display a table will all the equipments and their count and the corresponding chats will be displayed ( this is working fine .. all the graphs are fine) . when user selects a equipment from a table we need to call one more model and display a graph for the selected equipment .. i am facing problem displaying the data in the graphs it always displays the first record from the results what i mean by that is , when i execute the model it will return a table with orders based on month so i have binded month to Category Axis and i have created a data series for orders count now the problem is for all the months it will display only the orders count of the first month , if i bind the same model output to a table the values in the table are fine it displays all the values .
Can some one tell me what is wrong with my approch. If i create a seperate VC app for that
Regards,
Tarun.

Hi,
If u drag the chart from the out port of table then data will be displayed according to the row selected in that table.
If you drag the chart from the data service directly then the data in the chart and the table has to display same data.
If this not solved ur problem .
Send ur modle to me i will analyse it let you know the problem.
Send ur GML file of ur model to: "govindunagotla2gmail.com"
Mention the requirement clearly.
Regards,
Govindu

Constant Problems with flash, Please help Urgent for University work

Hello Im having problems, my 1st frame code is
stop();
import flash.events.MouseEvent;
sync_btn.addEventListener(MouseEvent.CLICK, onClick);
function onClick (e:MouseEvent):void{
gotoAndStop(2);
This seems to work fine, and get my to the 2nd frame, which is where i have problems, my aim is to make a button to continue, and a button to go back to the first frame i p much copied what you used.
stop();
SyncMusic_btn.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandler1);
function mouseDownHandler1(event:MouseEvent):void {
gotoAndStop(3);
BktoConfig_btn.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandler2);
function mouseDownHandler2(event:MouseEvent):void {
gotoAndStop(1);
The instance names were copied straight from where i named them so they are right, this is making me mad because ive been working on cs5.5 at uni, and on cs4 at home and my cs4 doesnt run my cs5.5 work i had made a start on (where all this was working)
I keep getting the error :
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at Untitled_fla::MainTimeline/frame2()
at flash.display::MovieClip/gotoAndStop()
at Untitled_fla::MainTimeline/onClick()
And the button going back doesnt work, Im in urgent need of help because this assignment is due next week, and ive been working on it for at least 2 weeks now and nothing i can do seems to be working.

The 1009 error indicates that one of the objects being targeted by your code is out of scope. This could mean that the object....
- is not in the display list
- doesn't have an instance name (or the instance name is mispelled)
- does not exist in the frame where that code is trying to talk to it
- is animated into place but is not assigned instance names in every keyframe for it
- is one of two or more consecutive keyframes of the same objects with no name assigned in the preceding frame(s).
If you go into your Publish Settings Flash section and select the option to Permit debugging, your error message should have a line number following the frame number which will help you isolate which object is involved.

Problem with computation of depreciation

Hi SDN forumers,
We have a concern regarding the computation of the depreciation to be posted next month. Here is the scenario.
We capitalized an asset last October 2008 with depreciation start date 10/01/2008. We processed the depreciation run for the month of October 2008 and at this point, the depreciation posted was correct based on October's Net Book Value. Come November 2008, we made some asset adjustments via F-90 (asset acquisition) which would increase the asset's net book value and at the same time adjust the depreciation per month.
I noticed though that the depreciation to be posted for November 2008 includes that of the unposted depreciation from October 2008 (due to the increase in Net Book Value in November). This means that the depreciation to be posted for November 2008 is significantly higher than that of December 2008. What I was expecting was that (NBV + Additions / remaining life = depreciation) and that the amount to be posted would be equal every month after the acquisition.
Is there a way we can adjust how the system computes depreciation? Thanks and best regards to each and everyone of you.

>
Markus Bredel wrote:
> Hi Patrick,
>
> in this case you have to check your depreciation key, I would recommend to check the documentation in the SAP Help Portal concerning keyword "depreciaiton methods". I propose to use a depreciation key which depreciates according to method "net book value over remaining useful life". I think you should consider this option and test it out.
>
> Regards,
> Markus
HI Markus,
Thanks for your continous help. I checked our existing depreciation key being used and at the same time checked "Depreciation Methods" in the SAP Help Portal. The SAP Help Portal suggested the following:
Straight-Line from the Book Value over Remaining Useful Life
+Use+
The book value of the fixed asset is distributed in uniform amounts over the remaining life. However, unlike straight-line depreciation over the total useful life, this method ensures that post-capitalization and subsequent acquisitions do not lead to an extension of expected useful life. Post-capitalization or subsequent acquisitions after the expiration of the specified expected useful life do, however, cause problems in this depreciation method. In such cases, the changeover key in the depreciation key used has to provide for another method after the expiration of the expected useful life.
+Calculation :+
Depreciation = net book value / remaining life
APC: 1000
Useful life: 10
Net book value: 500
Remaining useful life: 5
Depreciation = 500 / 5 = 100
You can represent this depreciation method in the system, for example, with a depreciation key that calculates a depreciation percentage rate from the remaining life, due to the depreciation calculation method Percentage from the useful life being set in its base method, and the Rem. life indicator being set in the multi-level method. Furthermore, the base value indicator "24" in the multi-level method ensures that the net book value is the basis for depreciation. The net book value and the remaining life are related proportionally, which results in straight-line depreciation. In the event of acquisitions after the expiration of the expected useful life, the depreciation key switches to a new phase after the planned end of useful life. The new phase is set up for straight-line/remaining life/pro rata/to zero/to end of life. As a result, these subsequent acquisitions are also depreciated completely.
I checked our depreciation keys and the settings are the ff:
Base Method: Percentage from the useful life
Multi-Level Method: 001
Remaining Life indicator? Yes
Base Value indicator: 24
The following settings follow that of the suggestion in the SAP Help Portal. Anything wrong with my settings? Thanks a lot for your help.

Problem with Chart of depreciation-Urgent

Similar Messages

Maybe you are looking for