Problem with Checking In/Out Items in Content Area

I've been reading the Portal On-Line help pages in regards to
checking in/out items. The help states that when an item is
checked out, the item is locked and a message "Checked out by:
UserName" is displayed next to the item. When I check out an
item, I do not see this "Checked out by" message. However, I do
see the checkout icon. Note - I am doing this through the
Content Area Navigation page. Is there something that I am
missing? (I have seen other threads in regards to the
checkin/checkout icons not displaying when the Content Area is
published as a portlet. We are having this problem as well.)
However, the lack of the "checked out" message happens in both
the Content Area Navigator and the published portlet.
Also, is there a way to get Portal to automatically generate
version numbers when a new version of an item is created. I see
that you can create a unique name or description .... but I'd
like to have Portal generate the version number for me. This is
done in the Application component section when you build forms,
menus, or reports.
Thank you for any assistance that you can provide.

The "checked out by" message only appears to other users - you
won't see it if you are the user who checked out the item.
The version number is planned for a future release.
Regards,
Jerry

Similar Messages

  • Frustratingly, since I upgraded to Yosemite 10.10, I too am having the worst problems with WiFi dropping out. I've never had this problem before on my iMac 27-inch mid 2011 model. Turning WiFi off and then back on again sometimes works. Help please.

    Frustratingly, since I upgraded to Yosemite 10.10, I too am having the worst problems with WiFi dropping out. I've never had this problem before on my iMac 27-inch mid 2011 model. Turning WiFi off and then back on again sometimes works. Help please. I've already tried a lot of your suggested fixes, but without success. Why hasn't Apple Fixed this?

    Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
    Step 1
    Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Step 2
    Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
    Step 3
    If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
    Step 4
    Open the Energy Saver pane in System Preferences and unlock the settings, if necessary. Select the Power Adapter  tab, if there is one. Uncheck the box marked
              Wake for Wi-Fi network access
    if it's checked.
    Step 5
    Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
    Step 6
    In the Wi-Fi settings, select
              Advanced... ▹ TCP/IP ▹ Configure IPv6: Link-local
    Click OK and then Apply.
    Step 7
    Reset the System Management Controller.
    Step 8
    Reset the PRAM.
    Step 9
    Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
    Step 10
    Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

  • Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

    canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
    i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
    i set the printer to correct icc profile
    print out comes out same with glazed colors and missing tones/colors
    however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
    i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
    can  you please assist and thanks

    I've a Pro9000 and also use Colormunki successfully.
    When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
    Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

  • How to create folder and items in content area without edit folder option

    Hello!!
    I would like to create something to users can create and insert folders and items in content area without using the edit folder option.They would have a form to include the name of the file and the name.i would like to do this for the end users can insert files more easily. Can i do this? Anyone can help me ??
    Thanks in advance!!!
    null

    The wwsbr_api and wwsbr_search_api packages are included in the current PDK, but won't be supported until 3.0.8 is release, later this month.
    Regards,
    Jerry
    null

  • Possible problems with Check out and Open Component and delayed publishing

    Hi,
    I've experienced some seemingly wrong behaviors of the checkout and open component and also with the delayed publishing feature, I've listed it down :
    1) The all important one:
    We know we've delayed publishing features for content, if we set the Release Date metadata at a future date, the content will not be released immediately, but do we have a delayed publishing features for a website page. Through manage website the user can add / delete a page(section), may do include or exclude from navigation etc.. but can they set a future date when a particular page can be included in or excluded from navigation? This should be a standard feature for a WCM solution and I hope there is some solution for sure.
    2) Can we set a datefield with a calendar feature as a page custom (section) property?
    3) Again the issue with checkout and open component, only the user with admin privilege seems to be able to change the content, normal contributors cannot, cause every time is tries to check in with the old author name, so the user has to have admin privilege to assign a different doc author's name. No trace also who is making the changes.
    4) Also facing a lot of problems while trying to implement when we use this checkout and open component. As we cannot check who is making the change there is to way to set us a step for self review, also user can only approve or reject but cannot edit the doc before passing it to the next step, if the step user is created using tokens then only checking out of the doc takes it pass the step user, but everything is working perfect with contributor data file. No problem whatsoever. Even if we use manual check out and then check in (i mean without using checkout and open component) this is working fine. But the main problem with non-technical users will be they would not like the content server portal at all and they would always prefer ms word over anything else. They would directly like to double-click on the website page, the word doc will pop up and they would make change and save.
    Issue 1 and 4 are killer issues for us, I need your help to find a solution. I have few more issues that i will post later.
    Regards,
    Nirmalya
    vijayr: Are u Vijay Ramanathan? Product Manager, Oracle UCM, u r my mentor sir.

    Hey Shotdawq,
    I was a bit low on bandwidth, so could not visit the forum any sooner.DIS is dynamic integration studio, it works on the webdav protocol.
    you will need to install DIS on the client machines. The POC that i did was integration of SiteStudio with CheckOutAndOpenInNative.
    I am also planning to referenc this functionality from WebSphere, what i have in my mind is to copy the java script from my sitestudio page and paste
    it in the JSP, and then using the CIS or RIDC will execute the serverices. At present i am stuck in some other work, If i get this thing working i will
    update you. In the meanwhile if you have some question for me, feel free to throw them.
    cheers,
    sapan

  • Item Check out/in in content areas published as portlet

    I have a content area I have published as a portlet. I have noticed that if I add an item (a file) and enable item check out, the icon to check out the file doesn't appear in the portlet. You have to open the content area in the content area navigation page to get the check out/in icon (and a few others.) Is there a way to do this inside the portlet?
    Thanks
    null

    This is the intended behaviour, to simplify the portlet interface. You'll notice, too, that you can't edit a checked-out item in the portlet.
    This will all change in the 3.1 release of the product.
    Regards,
    Jerry

  • InDesign CS5 causing problems with InCopy assignment file but not content files

    I'm having a strange InDesign/InCopy CS5 issue (Mac OSX 10.6.6; all system & Adobe updates are current).  In my InDesign doc I have one assignment file containing two content files. All of the InCopy pieces work fine in InDesign (i.e., I can check out/in, edit, etc.).  When I go to open the assignment file in InCopy, InCopy starts to open  it but then crashes. If I try to open each content file directly in  InCopy, no problem. I've tried deleting and recreating new assignments  in InDesign, but they all have the same result in InCopy.
    I think this actually is a problem with the InDesign file because if I export the InDesign file to IDML, then try to open the IDML file, InDesign crashes! I've trashed my InDesign preferences, made sure all cross-references are up to date, etc. Anybody have any ideas what else to look for in my InDesign file that might cause this problem?
    Thanks!
    Andrea

    Thanks John!
    1) Here are the first 10-ish lines from the crash report that is generated when I try to open the IDML file:
    Thread 0 Crashed:  Dispatch queue: com.apple.main-thread
    0   ???                               0xa0c266f0 _XHNDL_trapback_instruction + 0
    1   com.adobe.InDesign.Indexing       0x20778192 GetPlugIn + 341394
    2   com.adobe.InDesign.Indexing       0x20779009 GetPlugIn + 345097
    3   PublicLib.dylib                   0x0129228b CScriptProvider::AccessProperties(IScriptRequestData*, IScript*) + 571
    4   com.adobe.InDesign.Scripting      0x1f4befe8 GetPlugIn + 166440
    5   com.adobe.InDesign.Scripting      0x1f4c2e31 GetPlugIn + 182385
    6   com.adobe.InDesign.INXCore        0x20641444 GetPlugIn + 45220
    7   PublicLib.dylib                   0x0142c9e8 CScriptDOMElement::GetMultipleAttributes(K2Vector<IDType<ScriptID_tag>, K2Allocator<IDType<ScriptID_tag> > > const&, adobe::version_1::vector<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > >&) + 280
    8   PublicLib.dylib                   0x0142bd38 CScriptDOMElement::InsertProperties(adobe::version_1::vector<KeyValuePair<IDType<ScriptID _tag>, ScriptData>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, ScriptData> > >&, adobe::version_1::vector<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&, short, short) + 1336
    9   PublicLib.dylib                   0x0142beab CScriptDOMElement::SetSimpleAttributes(adobe::version_1::vector<KeyValuePair<IDType<Scrip tID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&, short) + 91
    10  PublicLib.dylib                   0x0142c0d3 CScriptDOMElement::SetAttributes(adobe::version_1::vector<KeyValuePair<IDType<ScriptID_ta g>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&) + 51
    11  PublicLib.dylib                   0x0142a2ea CScriptDOMElement::SetAttribute(IDType<ScriptID_tag>, DOMAttributeValue const&) + 202
    2) That works. Moved all pages (frame threading was preserved) to a new doc, exported to IDML, opened new IDML file just fine. Woo hoo! One of my editors won't be pleased that all of the tracked changes have disappeared, but at least the file functions now
    Wish I knew what caused the problem in the first place so we could (hopefully) prevent this from happening again. Any ideas?
    Thanks again for your help!
    Cheers,
    Andrea

  • Problems with MDM 5.5 SP05 Portal Content - ResultSet iView

    Hello Experts,
         We are having problems with standard iViews from MDM 5.5, more specific with ResultSet iView. We created an iView using English as default browser’s language but our client wanted it in Portuguese, so in the MDM Repository both languages were defined and used in MDM Data Manager, when passed to the Portal iView an error occur, but only in a ResultSet iView from the MDM Portal Content, the others iViews (itemDetails, PicklistSearch, etc...) are shown in Portuguese, and we cannot figure out why it works fine in English and not in Portuguese. We left the default language defined by client’s browser. Below I’m sending the LOG, which by the way, doesn't help much, but I put it also here. Any ideas of what should I do ?
    LOG ERROR:
    java.lang.IllegalArgumentException: unknown format type at
    We are using Portal 7.0 SPS11 and MDM 5.5 SP05 - Portal Content in a Win2003/Oracle server each.

    Alex,
    sorry to disturb you with this issue, can you explain me basic steps in order to setup standard MDM iviews from the portal?
    I mean, I have already installed all standard mdm business content, and also have configured system and aliases in the portal to connect to my mdm repositories. Those system/aliases are working propperly.
    But, when I try to preview standard MDM iviews/pages I got several JAVA errors in trace logs.
    Specific iviews are: Item Details, Show products, etc..any iview execution fails.
    So, am I missing something?, do i have to create a specific user in portal?, assign specifi roles or groups???.
    Platform is: nw2004s SR2, SP11, MDM content 5.5
    Thank you in advance.

  • Problem with status-button in item view of ME21/22/23N

    Hello ABAP,
    i have to check for some conditions when a PO is saved, and due to those checks either save it or well, not.
    This is working fine so far.
    when you click check, or save, conditions get checked and window with errors pops up.
    I´m using the normal error message procession used in SAPLMEGUI which i have to fill with thos three makros.
    I just have one problem, my status button in item line doesnt get updated. i tried with a lot of metafields by now but it seems trial and error is not the way to go here.
    any tips?

    requirement resolved.
    solution follows:
    DATA: lt_ytab             TYPE TABLE OF ysdch_vbap_idnlf,
          lt_data             TYPE TABLE OF ymmch_check_idnlf_out, "added ID (TYPE INT4) Field to structure
          lt_out              TYPE TABLE OF char80.
    DATA: ls_ytab             TYPE ysdch_vbap_idnlf,
          ls_mska             TYPE mska,
          ls_data             TYPE ymmch_check_idnlf_out,
          ls_out              TYPE char80,
          lv_row_end          TYPE i VALUE 10.
    CONSTANTS:  lc_col_start        TYPE i VALUE 10,
                lc_col_end          TYPE i VALUE 40,
                lc_row_start        TYPE i VALUE 10,
                lc_title            TYPE char80 VALUE
                'Fehler, noch Bestand zu Liquidations/Annulationsaufträgen vorhanden'.
    *~~~Get header data
    ls_head = im_header->get_data( ).
    *~~~Get item data
    lt_items = im_header->get_items( ).
    LOOP AT lt_items INTO lr_item.
      ls_item = lr_item-item->get_data( ).  "EKPO
      "select liquidations/annulations orders for supplier material nr.
      SELECT *
      FROM   ysdch_vbap_idnlf
      INTO   TABLE lt_ytab
      WHERE  /fis/idnlf = ls_item-idnlf.
      LOOP AT lt_ytab INTO ls_ytab.
        "now lets see which of those orders has order stock
        SELECT SINGLE kalab kaspe
        FROM   mska
        INTO   CORRESPONDING FIELDS OF ls_mska
        WHERE  vbeln = ls_ytab-vbeln
        AND    posnr = ls_ytab-posnr.
        IF ls_mska-kalab GT 0 OR ls_mska-kaspe GT 0.
          ls_data-vbeln       = ls_ytab-vbeln.
          ls_data-posnr       = ls_ytab-posnr.
          ls_data-/fis/idnlf  = ls_item-idnlf.
          ls_data-kalab       = ls_mska-kalab.
          ls_data-kaspe       = ls_mska-kaspe.
          ls_data-meins       = ls_item-meins.
          ls_data-ebelp       = ls_item-ebelp.
          ls_data-id          = ls_item-id. "saved ID for later processing
          APPEND ls_data TO lt_data.
        ELSE.
          CONTINUE.
        ENDIF.
      ENDLOOP.
    ENDLOOP. " lt_item
    IF NOT lt_data IS INITIAL.
      "we got annulation/liquidation orders with order stock for this material
      "so popup a error message
      LOOP AT lt_data INTO ls_data.
        IF NOT ls_data-vbeln IS INITIAL AND NOT ls_data-posnr IS INITIAL.
          mmpur_business_obj_id ls_data-id. "using other makro now and making use of ID
          "using mmpur_business_obj_id instead of mmpur_business_obj_it
        ENDIF.
        mmpur_metafield mmmfd_item_number.
        mmpur_message  'W' 'YMMCH' '110' ls_data-vbeln ls_data-posnr ls_data-ebelp ' '.
      ENDLOOP.
      ch_failed = 'X'.
    ENDIF.
    Edited by: Florian Kemmer on Sep 7, 2010 3:22 PM

  • Find out items where content is updated

    I am writing a Whats new portlet. I am using wwsbr_all_items.updatedate to determine items which were updated.
    I want to make a distinction between when the user actually loads a new version of the item versus the user just updating some metadata like : display name, description.
    I want to only display those items where the content has changed.
    We cannot use the new icon for this functionality since we have some company specific business logic.
    Any help will be appreciated.
    Harish

    hi harish,
    two ideas i have here:
    1. instead of writing a new portlet you could use the custom search portlet with its auto-query functionality and search for items that have been updated in the last x days - this automatically renderes the search results in place without displaying any search form mask.
    2. if you are writing your own portlet and you to check if the content (=file) of the item changed and not only the meta data this gets more tricky. you can first check the view wwsbr_all_items to check all the items that have been updated on a page. for the ones that have been updated (updatedate column) go to the view wwdoc_document and check the column that matches the filename column if it has been updated as well. if this has been updated as well you know that the file physically changed and you can pick this item to be displayed in your portlet.
    regards,
    christian

  • Problems with IE and text item

    Hi,
    I have a problem with IE (v6.0) when I add an text item to a region. IE puts 2 records with the same content into the DB (table wwv_text), Mozilla only 1.
    The Problem is, if I change the text of the item with IE, Mozilla, doesn't show the changes made, due to the fact, IE only changes one of the two records and Mozilla reads exactly the other one.
    But if I add a text item with Mozilla, only one record is stored in the DB.
    Is this a portal or IE bug?
    PS: I have disabled version control on the entire page group.

    hi dorian,
    is it possible that you add an item in a different language if you are using internet explorer. in this case 2 records are created. one for the base language and one for the translation. this also explains that you do not see the edited version of the item in the other browser - in case you are using a different language.
    a good technote related to this topic:
    http://www.oracle.com/technology/products/ias/portal/html/cm_main_10g_translation_tech_note.html
    just an idea...
    regards,
    christian

  • Problems with check printing RTF template

    To BI Publisher Gurus,
    I am working on the check printing RTF template and facing a few issues with page breaks, filling the insufficient invoice lines with template and positioning of the table(s) itself inside the RTF template.
    For page break, am using the following piece of code just before the end of all of my FE loops.
    <xsl:if xdofo:ctx="inblock" test="position()-1<count($inner_group)"><xsl:attribute name="break-before">page</xsl:att:attribute></xsl:if>
    the $inner_group is my group for G_INVOICES to loop through all the invoices of a check in G_CHECKS group.
    The problem I'm facing is, everytime a check is printed its printing a blank page in between. Searched all the earlier forum posts but none of the solutions worked in my case.
    Second issue, for filling the insufficient invoice lines (in my case, am printing 26 invoices per page per check), the call to the blank lines template is repeating twice and found no way to get rid of it.
    Third issue, if the check is running into a second page, the call to the blank lines template does not work and the position of the bottom part of check is getting misaligned.
    I am ready to send my template and the sample XML file to look at. Thanks for your time and effort.
    -Uday

    Hi Tim,
    Hi Tim,
    Could you please send me the sample rtf. We are also using APXPBFEG program for check printing..
    Also I have problem in generating dots(....) in the check where if total invoices lines are 37 and we have only one line of invoice then I have to generate 36 dots (.) in the invoice porition of the check..
    I appreciate your help..
    Thanks
    Krishna
    [email protected]

  • Problem with non-ASCII file name in content disposition header

    Hi All,
    I am facing some problems with the non-ASCII file name incase of content-disposition header. I read from the RFC 2183 that if the file name contains non-ASCII characters then the same should be encoded before sending to browser. I did the same but realized 2 problems:
    1. The name of the file is truncated in case the file name is slightly long for e.g. �����������j�b�g��������������������������.txt
    2. Also when the same file is opened in notepad, the title is showing encoded name %E6%9C%80%E4%B8%8A%E4%BD%8D.....
    Overall, I feel that the browser is not understanding or responding to the encoded header values.
    Is there any solution to this problem? I am using Microsoft IE 6.0.
    The code snippet is given below:
    protected void doGet(HttpServletRequest req, HttpServletResponse resp) throws ServletException, IOException {
              String fileName = "�����������j�b�g��������������������������.txt";          
              fileName = URLEncoder.encode(fileName, "UTF-8");
              resp.setCharacterEncoding("UTF-8");
              resp.setHeader("Content-Disposition", "attachment; filename=\"" + fileName + "\"");
              resp.setContentType("application/download-binary");
              String s = "This is inside txt file";
              resp.getOutputStream().write(s.getBytes("UTF-8"));
              return;
         }Any help or pointer would be highly appreciated.
    Thanks and Regards,
    Ashish

    The MIME standards for non-ASCII filenames are not widely implemented.
    Many mailers use an ad hoc method for encoding filenames. JavaMail
    supports both methods, but you need to set properties, such as the
    mail.mime.encodefilename property. See the JavaMail javadocs for
    the javax.mail.internet package.

  • Mail problem with long titles using utl_smtp / mixed content / attachements

    Hello,
    I'm having a problem with sending emails. The title as well as the body needs to be able to contain accented letters (é ç ...).
    For the body i got it working.
    And the title works fine too, untill the encoding passes a certain length, then goes all wrong and my mail header starts showing up in the mail body.
    Could anyone help me in finding a solution?
    Thanks in advance
    Below my code:
    DECLARE
       v_From       VARCHAR2(80) := 'test@localhost';
       v_Recipient  VARCHAR2(80) := 'test@localhost';
       v_Cc         VARCHAR2(80);
    -- long subject causing problems
       v_Subject    VARCHAR2(32000) := '123456789111111111111111111111118888888888888111111111111111991234567891111111111111111111111188888888888881111111111111119912345678911111111111111111111111888888888888811111111111111199';
       v_body       VARCHAR2(32000) := '<a href="#">tester</a><br><br>en nog wat éékes en ççkes';
       v_Mail_Host  VARCHAR2(30) := 'localhost';
       v_Mail_Conn  utl_smtp.Connection;
       crlf         VARCHAR2(2)  := chr(13)||chr(10);
    BEGIN
      v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
      utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
      utl_smtp.Mail(v_Mail_Conn, v_From);
      utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
      utl_smtp.Data(v_Mail_Conn,
    -- write header
        'Date: '   || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
        'From: '   || v_From || crlf ||
        'Subject: ' || utl_encode.MIMEHEADER_ENCODE(v_Subject) || crlf ||
        'To: '     || v_Recipient || crlf ||
        'Cc: '     ||  v_Cc || crlf ||
        'X-Mailer: Mailer by Oracle UTL_SMTP' || crlf ||
        'X-Priority: 1' || crlf ||
        'MIME-Version: 1.0'|| crlf ||       -- Use MIME mail standard
        'Content-Type: multipart/mixed;'|| crlf ||
        ' boundary="-----SECBOUND"'|| crlf ||
        crlf ||
    -- add message body
        '-------SECBOUND'|| crlf ||
        'Content-type: text/html; charset=UTF-8'|| crlf ||
        'Content-Transfer-Encoding: base64'|| crlf ||
        crlf ||
        utl_raw.cast_to_varchar2(utl_encode.base64_encode(utl_raw.cast_to_raw(v_body)))||
        crlf ||
    -- add csv attachment
        '-------SECBOUND'|| crlf ||
        'Content-Type: text/plain;'|| crlf ||
        ' name="excel.csv"'|| crlf ||
        'Content-Transfer_Encoding: 8bit'|| crlf ||
        'Content-Disposition: attachment;'|| crlf ||
        ' filename="excel.csv"'|| crlf ||
        crlf ||
        'CSV,file,attachement'|| crlf ||   -- Content of attachment
        crlf ||
        '-------SECBOUND--'                            -- End MIME mail
      utl_smtp.Quit(v_mail_conn);
    EXCEPTION
      WHEN utl_smtp.Transient_Error OR utl_smtp.Permanent_Error then
        raise_application_error(-20000, 'Unable to send mail: '||sqlerrm);
    END;
    /

    Hi,
    I did not think the characterset and database would matter for this problem, but here is the info you requested.
    The database is an Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
    The characterset : NLS_CHARACTERSET     AL32UTF8
    And i don't have a clue about the characterset of the operating system (not even sure what the operating system is), but i think that will be utf-8 aswell.
    I'm not sure what i did, to come over as rude, but i didn't mean to and i apologize for it.

  • Vendor Master Upload Problem with Check Box

    Hi All,
    I have a problem with Vendor Master Upload program. In one of the screen of XK01 transaction depending upon the PO Box, Postal Code, Other City and Other Region i have to check the PO Box w/o no check Box. So in my program after i check the PO Box, Postal Code, Other City and Other Region values how to write a code that i can check the PO Box w/o no. Or other wise how can i send value to the Po Box w/o no check box. field
    Thanks in advance.

    The call to the first screen should look something like:
        perform dynpro
          tables bdcdata
          using:
         'X' 'SAPMF02K'     '0105',         "Create Vendor: Initial Screen
          ' ' 'RF02K-BUKRS'             'COCO',
          ' ' 'RF02K-KTOKK'             'YYYY',
          ' ' 'USE_ZAV'                 'X'.
    I'm using screen 105, not 100 here.
    Rob

Maybe you are looking for