Problem with cisco series 800 router and SMTP

Hello,
we bought a 877 cisco router and have some problem with SMTP.
I try to read all forum and KB about but do not find any solution.
the problem is that when i try to send any email from client (windows mail) i receive a error 533: you need to supply the correct username and password.
when trying throught hmailserver i receive an email "undeliverable" with this error in body:
Error Type: SMTP
Remote server (62.149.128.202) issued an error.
hMailServer sent: EHLO Globalnet
Remote server replied: 502 unimplemented (#5.5.1)
receving email work correctly.
i'm already using smtp auth, and with my old router everything work fine.
so i beleive is a config problem, maybe with ESMTP (ehlo)?.
i attach my config:

Dear sirs
Thank you for answer so quickly
I download this document from Cisco âConfiguring the (Remote) Common Application Programming Interface for Cisco 800 Series Routerâ.
I have a Lan with Asterisk IP-PBX , the Cisco router have a BRI to public exchange (ISDN) , the router act like a DCP (ISDN- Device Control Protocol) server and listen (DCP messages) in 2578 port.
I need o know the contents of the TCP frame that carry (ISDN-TCP, the DCP messages) to put a SIP client to talk with PSTN/ISDN using the router. I want to write a software module in Asterisk that translate SIP in (ISDN-DCP) to connect the SIP Phones to the PSTN/ISDN using the BRI ports of the Cisco router. I need to now the contents of this message to dialogue with RCAPI server of the router.
If forum is the right place perhaps to put this, Could you give me a better place, a mail or other forum to receive the speciation of (ISDN-DCP)
thank you
With kinds Regards
JoÃ£o Pereira Rosa

Similar Messages

Problem with Cisco 3250 mobile router WMIC configuration

I have two 3250 mobile routers, and each one has 2 WMICs, 1 MARC and 1 4-port FEMIC. WIC1 seems to be the AP since its FE port connects to the FE0/0 or MARC, and WIC2 seems to be the bridge since its FE0 connects to FEMIC's FE2/3. The IOS version of router is 12.4(2)T3, and IOS version of both WMIC is 12.2(15).
I configured two routers in the following way (similar configuration as the police car example in the 3200 router software configuration guide):
1. Router1's WIC2 (bridge) acts as WGB, and router2's WIC2 (bridge) acts as root bridge.
2. Router2 is the DHCP server also.
3. WIC1 of each router is configured as root AP.
During my testing, the following scenarios happened:
1. WIC2 of both router can successfully associated.
2. Wired client can get IP address from router2 when it is pluged into either router's FE ports.
3. Wirless client can associate with the bridge connection, i.e. connected to the wirless bridge connection. (Weired! Can bridge work as a AP?)
4. Wireless client can't stably associate with WIC1 of either router, which is supposed to work as AP. A lot of authentication and deauthentication messages are flushing in the console. IP address can be leased, however, Ping was not successful.
My question is:
1. Why did this kind of problem happen?
2. How should i configure each WIC to achieve the set up of wireless client associate with AP and routers communicate through bridge?
3. Is my understanding on 3200 router wrong?
Thanks a lot for reply!

Hello,
i have the same problem with router CISCO861W-GN-E-K9. Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)
Can someone help?
Thank you.
Here is my config for internal AP and router.

Internet problems with an RV-082 Router and Swann DVR connected.

I have a problem from the twilight zone. When my Swann DVR (CONVR-B163MP) is NOT connected I can access the internet without any problems. When the Swann DVR is connected, I lose access to Google and secure "Log-in" webpages. It is as if there is a firewall blocking them. I can access most normal websites without any problems. Once the problem occurs, I need to reboot the router in order to gain clear access again. Just unplugging the DVR will not fix it.
I have a resolution by connecting an older router directly to the WAN, then linking that router to the Cisco RV-082. I have access controlled by MAC codes and took off the DVR to prevent it from getting access to the Cisco RV-082. The DVR is connected to the older router to get to the internet.
It is just a strange problem.
The Swann DVR is working through the internet to provide a live video feed to my phone.
If anyone knows an answer I would be glad to hear it.
JLW

TelephoneGuru.net is the number one service provide for new and used phone systems, telecoms, voice & data cabling, fiber optics, system repairing, etc. in whole of Dallas and Tarrant County Cities.

Port Forward in Cisco series 800

Dear Support
below the configuration of Cisco Series 800 Router that Has VDSL port of internet , the configuration as below :
i add three command
what is required in order to make port forward
ip nat inside source static tcp 8000 10.10.10.10 8000 dilar 0
ip nat inside source static tcp 554 10.10.10.10 554 dilar 0
ip access list extended 100
permit ip any any
what is required to make port forward to the local ip address 10.10.10.10 from outside interface that is VDSL port ?
! Last configuration change at 10:47:44 KSA Wed Apr 22 2015 by aamalsup
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime
service password-encryption
hostname AamalNet
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
enable secret level 2 5 $1$Y4PF$K6TQ5wf0gcHiO5IxvLZba0
enable secret level 5 5 $1$WZeO$BzTCl0C0e1078CWxExJK0/
enable secret 5 $1$plq6$P5HVL/tR81cs0GFDrD.0V/
aaa new-model
aaa authentication login default local
aaa authentication login sdm_vpn_xauth_ml_1 local
aaa authentication login sdm_vpn_xauth_ml_2 local
aaa authorization exec default local
aaa authorization network sdm_vpn_group_ml_1 local
aaa session-id common
clock timezone KSA 3 0
crypto pki trustpoint TP-self-signed-1682106276
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1682106276
revocation-check none
rsakeypair TP-self-signed-1682106276
crypto pki certificate chain TP-self-signed-1682106276
certificate self-signed 02
30820250 308201B9 A0030201 02020102 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31363832 31303632 3736301E 170D3032 30333031 30303038
35315A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 36383231
30363237 3630819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100C2F3 49897460 71FEB259 7794B7C6 D398958A 2D338F0F C69F0E75 1137B16C
C261A275 8416DAF6 FC19AA6E 50024019 66CE4DB8 3AFAB6FE CE892B42 86A93490
97259E47 D740B2F4 9AA2D307 7B676841 2CAAA879 D945A6FD 717B507F 77399332
1644CEDE 884BF133 ACFBBC80 9869A104 54CC3EEE 9D521378 EC762D86 C3F0ABC9
CA990203 010001A3 78307630 0F060355 1D130101 FF040530 030101FF 30230603
551D1104 1C301A82 18417761 6C416D61 6C792E61 77616C6E 65742E6E 65742E73
61301F06 03551D23 04183016 80149ADD A651C9F9 F8369354 5C904777 090FEB75
72E0301D 0603551D 0E041604 149ADDA6 51C9F9F8 3693545C 90477709 0FEB7572
E0300D06 092A8648 86F70D01 01040500 03818100 50ACCA98 1A5FCCAD FC61D703
A8589B02 AFB8CD47 BD1CC7B0 B095C97F AA0604A8 F8495053 C8A9CBB9 644F5674
318A7AA0 873250AD 1DE28CE2 BE21ED19 BF212CF7 E2A97CFB FFA62F1E 643CEDFE
90D02109 719FD4D3 98E6C40B D61CE89C D2426C1E 3CBD9FBE 397F7F7C F1DD279E
14F8BB2D ABFA784B 6E04274B EDCBFC8F A805E91D
    quit
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
ip dhcp excluded-address 10.10.11.1
ip dhcp pool lan
import all
network 10.10.10.0 255.255.255.0
default-router 10.10.10.1
dns-server 212.93.192.4 212.93.192.5
lease 0 2
ip dhcp pool wireless
import all
network 10.10.11.0 255.255.255.0
default-router 10.10.11.1
dns-server 212.93.192.4 212.93.192.5
lease 0 2
no ip domain lookup
ip domain name aamal.net.sa
ip name-server 212.93.192.4
ip name-server 212.93.192.5
no ipv6 cef
cwmp agent
enable download
enable
session retry limit 10
management server password 7 094D4308151612001D05072F
management server url http://aamalservice.aamal.net.sa:9090
license udi pid C887VA-W-E-K9 sn FCZ17459018
archive
log config
hidekeys
username k privilege 15 password 7 020D
username admin privilege 15 password 7 14161606050A
controller VDSL 0
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group aamalnet
key aamalnet
dns 212.93.192.4 212.93.192.5
include-local-lan
dhcp server 10.10.10.1
max-users 10
netmask 255.255.255.0
crypto isakmp profile sdm-ike-profile-1
   match identity group aamalnet
   client authentication list sdm_vpn_xauth_ml_2
   isakmp authorization list sdm_vpn_group_ml_1
   client configuration address respond
   virtual-template 1
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
mode tunnel
crypto ipsec profile SDM_Profile1
set security-association idle-time 60
set transform-set ESP-3DES-SHA
set isakmp-profile sdm-ike-profile-1
bridge irb
interface ATM0
no ip address
no atm ilmi-keepalive
interface ATM0.1 point-to-point
pvc 0/35
pppoe-client dial-pool-number 1
interface Ethernet0
no ip address
shutdown
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Virtual-Template1 type tunnel
ip unnumbered Dialer0
tunnel mode ipsec ipv4
tunnel protection ipsec profile SDM_Profile1
interface Wlan-GigabitEthernet0
description Internal switch interface connecting to the embedded AP
switchport mode trunk
no ip address
interface wlan-ap0
description Embedded Service module interface to manage the embedded AP
ip unnumbered Vlan1
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 10.10.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1452
interface Vlan2
no ip address
bridge-group 2
interface Dialer0
ip address negotiated
ip mtu 1452
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap callin
ppp chap hostname [email protected]
ppp chap password 7 0007145E2E5A05522E1858
no cdp enable
interface BVI2
ip address 10.10.11.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 1 interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 Dialer0
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 10.10.10.0 0.0.0.255
access-list 1 permit 10.10.11.0 0.0.0.255
access-list 23 permit 212.93.196.0 0.0.0.255
access-list 23 permit 212.93.192.0 0.0.0.255
access-list 23 permit 212.93.193.0 0.0.0.255
access-list 23 permit 10.10.10.0 0.0.0.255
access-list 23 permit 10.10.11.0 0.0.0.255
dialer-list 1 protocol ip permit
no cdp run
snmp-server community private RW
snmp-server community public RO
bridge 1 protocol ieee
bridge 1 route ip
bridge 2 protocol ieee
bridge 2 route ip
privilege interface level 5 encapsulation
privilege interface level 5 description
privilege interface level 5 no encapsulation
privilege interface level 5 no description
privilege interface level 5 no
privilege configure level 5 ip route
privilege configure level 5 interface
privilege configure level 5 controller
privilege configure level 5 ip
privilege exec level 5 copy running-config tftp
privilege exec level 5 copy running-config
privilege exec level 5 copy
privilege exec level 5 write memory
privilege exec level 5 write
privilege exec level 5 configure terminal
privilege exec level 5 configure
privilege exec level 5 show processes cpu
privilege exec level 5 show processes
privilege exec level 2 show running-config
privilege exec level 5 show configuration
privilege exec level 2 show
privilege exec level 5 clear counters
privilege exec level 5 clear
banner exec
CC
% Password expiration warning.
Cisco Router and Security Device Manager (SDM) is installed on this device and
it provides the default username "cisco" for one-time use. If you have already
used the username "cisco" to login to the router and your IOS image supports the
"one-time" user option, then this username has already expired. You will not be
able to login to the router with this username after you exit this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you want to
use.
banner login
CC
********STC AamalNet Service****************************************
********Authorize Access Only. For more Support Call 909************
line con 0
privilege level 15
no modem enable
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
stopbits 1
line vty 0 4
access-class 23 in
privilege level 2
transport input telnet ssh
scheduler max-task-time 5000
scheduler allocate 20000 1000
end

Hello,
Sure.
What version are you running?
Regards,

I recently replaced my dead airport router with a netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer and yet when I try to print wirelessly I get the message: "printer not connected; printer offline".

I recently replaced my dead airport router with a Netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer; yet when I try to print wirelessly I get the message: "printer not connected; printer offline". Lexmark support verified that my printer was connected to the new router and the problem was with the computer's printer configuration and they could reconfigure it online if I paid for their "Premium Support" services ($119 for one year, 3 fixes). I declined, feeling sure that this is something I could do if I knew how. Could it be an incompatability issue with OS 10.8.3?

You saved me $$$ that I can ill afford on my fixed income. I was very unhappy with the "support" from Lexmark... what a rip off! Thank you dwb!

I'm using mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts- I didn't have any problems with it before the upgrade and in safari I don't have this problem.

Hello, I'm using Mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts… I didn't have any problems with it before the upgrade and in safari I have no problem with it. please help me- I don't like to use safari a my browser...

elly903 wrote:
Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly...
Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) for $15:
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
It will input your Quicken PPC data file directly if it was Quicken 2005 through 2007. If older you need Quicken 2006 or 2007 PPC first to convert your data file; and this update must be done BEFORE you upgrade to Mavericks:
http://quicken.intuit.com/support/help/patching/quicken-2006-manual-updates--mac -/GEN82200.html
Filemaker Pro PPC (in this case 7) running in Snow Leopard Server installed into Parallels for use in Lion, Mt. Lion and Mavericks:
[click on image to enlarge]
Snow Leopard Server: 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)
This solution allows you to run your Photoshop Elements in Mavericks concurrently with Filemaker Pro PPC. Mavericks is a free download.

My host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

my host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

There are several possible causes for this problem.
1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local".
2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
3. A Mac wakes from sleep due to network traffic. This is due to a bug in OS X that may only affect some models.
4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
6. See also this support article.
Rename the computer in the Sharing preference pane.

NTP Service on Domain Controller have problem with cisco switch

Hello!
I have Windows Server 2008 R2 SP1 Domain Controller with NTP services
The windows opertion system clients get NTP time ok.
There are problem with cisco switch, can't get time from NTP.
Can anybody help me to fix problem?
C:\Users\Sysuser>w32tm /query /configuration
[Configuration]
EventLogFlags: 2 (Local)
AnnounceFlags: 5 (Local)
TimeJumpAuditOffset: 28800 (Local)
MinPollInterval: 6 (Local)
MaxPollInterval: 10 (Local)
MaxNegPhaseCorrection: 1800 (Local)
MaxPosPhaseCorrection: 1800 (Local)
MaxAllowedPhaseOffset: 300 (Local)
FrequencyCorrectRate: 4 (Local)
PollAdjustFactor: 5 (Local)
LargePhaseOffset: 50000000 (Local)
SpikeWatchPeriod: 900 (Local)
LocalClockDispersion: 10 (Local)
HoldPeriod: 5 (Local)
PhaseCorrectRate: 7 (Local)
UpdateInterval: 100 (Local)
[TimeProviders]
NtpClient (Local)
DllName: C:\Windows\system32\w32time.dll (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
AllowNonstandardModeCombinations: 1 (Local)
ResolvePeerBackoffMinutes: 15 (Policy)
ResolvePeerBackoffMaxTimes: 7 (Policy)
CompatibilityFlags: 2147483648 (Local)
EventLogFlags: 0 (Policy)
LargeSampleSkew: 3 (Local)
SpecialPollInterval: 3600 (Policy)
Type: NTP (Policy)
NtpServer: 10.7.0.4 (Policy)
NtpServer (Local)
DllName: C:\Windows\system32\w32time.dll (Local)
Enabled: 1 (Local)
InputProvider: 0 (Local)
AllowNonstandardModeCombinations: 1 (Local)
VMICTimeProvider (Local)
DllName: C:\Windows\System32\vmictimeprovider.dll (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
Cisco config and errors
CISCO1#show ntp ass det
10.7.0.7 configured, insane, invalid, stratum 3
ref ID 10.7.0.4, time D5BC850F.C8400AB2 (15:50:39.782 MSK Mon Aug 19 2013)
our mode client, peer mode server, our poll intvl 1024, peer poll intvl 1024
root delay 62.50 msec, root disp 11128.04, reach 377, sync dist 11218.796
delay 6.06 msec, offset -467951.1096 msec, dispersion 56.49
precision 2**6, version 3
org time D5BC8864.F79C33A7 (16:04:52.967 MSK Mon Aug 19 2013)
rcv time D5BC8A38.EBDECB39 (16:12:40.921 MSK Mon Aug 19 2013)
xmt time D5BC8A38.EA5173BE (16:12:40.915 MSK Mon Aug 19 2013)
filtdelay = 6.06 5.87 3.23 7.90 6.41 5.17 13.03 3.43
filtoffset = -467951 -467905 -467936 -467885 -467764 -467816 -467707 -467697
filterror = 0.02 15.64 31.27 46.89 62.52 78.14 93.75 93.78

Hi,
>>I gave log on as a service right to this account in Default Domain Controllers Policy but unfortunately it was not enough
Based on your description, we can try to grant this account Allow log on locally
user right in the default domain controller policy to see if it helps.
The policy setting is:
Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Allow log on locally
Allow log on locally
http://technet.microsoft.com/en-us/library/cc756809(v=ws.10).aspx#feedback
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

I am having problems with connecting to my router wireles...

I am having problems with connecting to my router wirelessly. How do I determine my access point's network key?

Follow this from a computer already connected: 1. Open setup page of router by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name. Use your password if you have changed it earlier. 2. Go to wireless tab. 3. Go to wireless security sub-tab. 4. If security mode is wpa or wpa2 note down pass phrase/shared key, if security mode is WEP note down wep key number 1. This will be your network key.

Window 8 WiFi problem with Cisco wireless network

Anyone encounter a Windows 8 WiFi authentication problem with Cisco wireless network?
We are using WLC 5508, 7.2.111, and AP 3602i with WPA2.
Sent from Cisco Technical Support iPad App

This problem occurred with Soney, and Dell models. Lenovo with Windows 8 factory installed is working fine.
Won't make any difference as these laptop's wireless NIC cards are different.
Can you try with OPEN authentication. If the Sony and/or Dell laptop works, then you start cranking up the security and/or encryption settings until you break them.
I'm with Scott here: It's got to be a wireless NIC card driver.
As what George has stated, post the debug of the failed attempts.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck

Problems with creation of catalogue XPGrpwise and temporary

Problems with creation of catalogue XPGrpwise and temporary files.
I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

Cvetaev,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

HT4009 Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I wan

Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?

Contact iTunes Store Support.

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

Problem with cisco series 800 router and SMTP

Similar Messages

Maybe you are looking for