Problem with Clean Access Agent and Windows Updater

I have a problem with a laptop when using Cisco Clean Access Agent. The agent keeps directing the laptop to get updates from the Windows Update site, but when I have connected the laptop via cable, windows updates tells me there are no updates either essential or optional. The laptop is a Sony VIVO VGN-FJ270 running XP Home Edition SP2 and the Clean Access Agent is version 4.0.2.1
Any help is appreciated!!

Verify the allowed hosts in CCA agent.
Try these link:
http://www.cisco.com/en/US/products/ps6128/tsd_products_support_series_home.html
http://www.cisco.com/en/US/products/ps6128/products_qanda_item09186a00803b7a81.shtml

Similar Messages

  • Clean Access Agent in Windows 8, 64 bit

    Hey guys,
    I posted this on another Cisco community site, someone there suggested I try here. He also gave me this page as a possible solution but I'm unable to download from the page as I don't have a service contract, I'm just a Dad trying to get his kid's computer online at school.
    http://www.cisco.com/cisco/software/release.html?mdfid=282855549&flowid=34712&softwareid=282573326&release=4.8.3&relind=AVAILABLE&rellifecycle=&reltype
    Kind of at our wit's end here. My daughter is at Mass Art in Boston with a nearly new computer (6 months old at most) with Windows 8 Pro and the Clean Access Agent isn't letting her connect saying she has no updated AV installed. However, we did have BitDefender installed and updated and I've seen BitDefender on a Cisco list on line somewhere, the tech department at the school also said that it should work. Thinking there might be a conflict with BitDefender and Windows Defender we uninstalled BitDefender but to no avail, the agent still won't allow access.
    Now the tech dept. at the school is telling her she has to reformat her hard drive (Ha!!) which is simply and completely unacceptable.
    Does anyone here know if the above link may solve our problem?
    Can someone send me the necessary files?
    Is there someone the school tech people can contact for this?
    Am I asking enough annoying questions?
    Many thanks for your time,
    Ken

    Hello Ajay,
    When I try to download either the "4.8.3 Patch for Windows 8 support" or the "4.8.3 Patch for Windows 8 Official support" it says I need a service contract. Which, of course, I don't have. I'm just a Dad trying to get his kids computer connected to the school's network!
    Do you know what the difference is between the "4.8.3 Patch for Windows 8 support" and the "4.8.3 Patch for Windows 8 Official support" downloads?
    Might you be able to email me what I need to [email protected]?
    I don't know how all of this works between the school and Cisco but if you can't send it to me might it be something the tech support people at the school can download? I would have to guess they do, indeed, have a service contract.
    Thanks again,
    Ken

  • Clean access rules and Windows service pack 3

    I am having a small issue with our Clean Access Manager blocking any Windows XP computer that has service pack 3 installed. The main failure it is giving in the reports is this
    Failed Checks:
    pc_Windows-XP-SP2, Registry Check [\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\CSDVersion contains Service Pack 2]
    pc_Windows-XP-SP1, Registry Check [\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\CSDVersion contains Service Pack 1]
    The key that is there when sp3 is installed is this:
    \HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\CSDVersion contains Service Pack 3
    I have verified that pc_Windows-XP-SP1 and pc_Windows-XP-SP2 are there as well as created a check for service pack 3 eric_pc_Windows-XP-SP3 and added the check to the rules governing windows updates for XP pro/home and windows media edition. But for some reason they are not taking effect. The CAM is running version 4.1.3.1 and the the CAA is version 4.1.3.2. Any assistance would be greatly appreciated.
    Thank you,
    Eric

    Here is the configuration guide for the Clean Access Manager which will help you :
    http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/413/cam/m_instal.html

  • Mac OS X Leopard Fails with Clean Access Agent

    Hey All,
    I've had several students in my office saying that Leopard and Clean Access don't work together. I haven't seen a specific error, yet, but was wondering if anyone else is seeing this problem...?
    I'm using the 4.1.2.0 agent for Macs.
    Mike

    I am at Cal Poly SLO and we have this error "Agent user operating system is not supported" Part of our system has been changed back to allowing Mac users to Authenticate using the web browser instead of the agent. That should work until cisco updates the agent

  • Problem with MS Access Files and executable files migrateds

    Hi all.
    We are migrating an old Netware 6.0 server to new SLES 10 SP3 with OES 2 SP2a. I already migrated one volume and in this weekend well migrate the last, and most important, volume to new OES 2 server.
    The problem is about some MS Access databases that are very very used for all users and some executable applications that was writed using fisical path like \\OLDSERVER\VOL\PATH\APP.EXE or some links to libraries, databases, images, etc.
    The old NW 6.0 server will be removed from the tree in 2 or 3 weeks and in this time the two servers will co-exists. I want to know if it is possible redirect NCP requests to OLDSERVER to NEWSERVER without users rewrite all of MS Access and executable applications. Is it possible?
    Tks
    Alan Cota.

    AlanCota wrote:
    >
    > Hi all.
    >
    > We are migrating an old Netware 6.0 server to new SLES 10 SP3 with OES
    > 2 SP2a. I already migrated one volume and in this weekend we´ll migrate
    > the last, and most important, volume to new OES 2 server.
    >
    > The problem is about some MS Access databases that are very very used
    > for all users and some executable applications that was writed using
    > fisical path like \\OLDSERVER\VOL\PATH\APP.EXE or some links to
    > libraries, databases, images, etc.
    >
    > The old NW 6.0 server will be removed from the tree in 2 or 3 weeks and
    > in this time the two servers will co-exists. I want to know if it is
    > possible redirect NCP requests to OLDSERVER to NEWSERVER without users
    > rewrite all of MS Access and executable applications. Is it possible?
    >
    > Tks
    >
    > Alan Cota.
    >
    >
    Have you considered trying to use a dns alias to it. I have not tested with
    MS access specifically but many other apps it works perfectly for. This is
    how I get around those issues. Of course your issue is that you still
    havethe existing server in the tree. How much will there still be on the
    old server. You could rename the old nw server and than update its info in
    dns to resolve this.

  • Problems with photoshop elements 10 and windows 8

    I bought photoshop elements 10 for my wife last year for Christmas.  She decided not to install it on our old computer because we knew that we were planning to replace the computer this year.  We finally got around to replacing it and the new computer came with Windows 8.  She installed her photoshop on it and she is having problems with it.  I'm wondering if there is a compatability problem with the windows 8?  Is there an update for the pse 10 that will make it work with windows 8?

    PSE10 is said to be compactable with windows8. What kind of problem are you facing? Did you try launching after resetting preferences? to know more about reseting preferences, check http://helpx.adobe.com/photoshop-elements/using/undo-redo-cancel-actions.html#restore_defa ult_preferences

  • Problems with Nvidia GeForce 210 and windows 8.1

    Hi all, I have Windows 8.1 Pro update 1 64bit installed, two weeks ago I started giving problems graphics card NVidia (even has me
    given several blue screen).
    I tried to update the drivers for the card but I got the same problem. It was working properly with generic
    drivers, and if I went to Computer Administrator me a yellow triangle appeared
    on my graphics card and the properties told me the following:
    Windows has stopped this device because it has reported problems.
    (Code 43 )
    My machine is as follows:
    Mainboard : Asus P5K SE
    Chipset: Intel P31/P35
    Processor : Intel Core 2 Quad Q6600 @ 2400MHz
    Physical Memory : 3072MB (3 x 1024 DDR2- SDRAM)
    Video Card : NVIDIA GeForce 8500 GT
    Hard Disk : Seagate ST3320620AS ATA Device (320GB )
    Monitor Type: LG Electronics L1919S
    I just formatted
     the computer from scratch, and
    I still had the same problem with the graphics card,
    so I imagined it would be a hardware problem
    and bought NVIDIA GeForce 210.
    In the end I
    upgraded to Windows 8.1 update 1 with
    the latest drivers for the GeForce 210,
    and after 6 days running everything correctly, a few days ago
    returned to give me problems,
    the screen sometimes freezes and will not
    let me do anything and after a while
    giving me a blue screen and reboots
    me, I suspect that the graphics drivers
    are giving me problems, and I had to
    disable the graphics card and work with
    generic drivers from Microsoft, and even then I
    was restarted once.
    I installed Driver Booster and all the drivers are updated.
    Could
     anyone analyze
    dump files dmp ? Download here 
    I got another dmp:
     C:\Windows\MEMORY.DMP  but it is too heavy.
    Thanks

    yes, I check the dump files
    this cause by graphic card, on which graphic card you reformat your PC and update
    .NET framework maybe cause this driver corrupted
    my suggestion is try using internal graphic card, just for testing
    Just in case you don't believe me, please check this dump file
    * Bugcheck Analysis *
    Use !analyze -v to get detailed debugging information.
    BugCheck 116, {ffffe000d84c4010, fffff800b540be2c, ffffffffc000009a, 4}
    Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for nvlddmkm.sys
    *** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
    Probably caused by : nvlddmkm.sys ( nvlddmkm+9bbe2c )
    Followup: MachineOwner
    1: kd> !analyze -v
    * Bugcheck Analysis *
    VIDEO_TDR_FAILURE (116)
    Attempt to reset the display driver and recover from timeout failed.
    Arguments:
    Arg1: ffffe000d84c4010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
    Arg2: fffff800b540be2c, The pointer into responsible device driver module (e.g. owner tag).
    Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
    Arg4: 0000000000000004, Optional internal context dependent data.
    Debugging Details:
    FAULTING_IP:
    nvlddmkm+9bbe2c
    fffff800`b540be2c 803db68aeeff00 cmp byte ptr [nvlddmkm+0x8a48e9 (fffff800`b52f48e9)],0
    DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT
    CUSTOMER_CRASH_COUNT: 1
    BUGCHECK_STR: 0x116
    PROCESS_NAME: System
    CURRENT_IRQL: 0
    ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
    STACK_TEXT:
    ffffd000`8adadbb8 fffff800`b457bfac : 00000000`00000116 ffffe000`d84c4010 fffff800`b540be2c ffffffff`c000009a : nt!KeBugCheckEx
    ffffd000`8adadbc0 fffff800`b457008d : fffff800`b540be2c ffffe000`d760b7f0 ffffe000`d84c4010 00000000`00000001 : dxgkrnl!TdrBugcheckOnTimeout+0xec
    ffffd000`8adadc00 fffff800`b4570582 : ffffe000`d760f540 ffffd000`8adadc60 00000000`00000002 00000000`00000001 : dxgkrnl!ADAPTER_RENDER::Reset+0x1f5
    ffffd000`8adadc30 fffff800`b457b919 : ffffd000`8ada01b0 00000000`00000000 ffffe000`d5ff91a0 ffffe000`d742b000 : dxgkrnl!DXGADAPTER::Reset+0x416
    ffffd000`8adadca0 fffff800`b446cfde : fffff800`b4453c90 ffffe000`d742b000 fffff802`84c1c000 00000000`00000000 : dxgkrnl!TdrResetFromTimeout+0x15
    ffffd000`8adadcd0 fffff800`b4453d1d : ffffe000`d742b000 00000000`00000080 ffffe000`d50b4500 ffffe000`00000000 : dxgmms1!VidSchiRecoverFromTDR+0x1a
    ffffd000`8adadd00 fffff802`84ceb794 : fffff802`84f69a00 ffffe000`d50b4500 ffffd000`8adaddd0 fffff802`84d7337d : dxgmms1!VidSchiWorkerThread+0x8d
    ffffd000`8adadd40 fffff802`84d765c6 : fffff802`84f02180 ffffe000`d50b4500 fffff802`84f69a00 00000000`00000000 : nt!PspSystemThreadStartup+0x58
    ffffd000`8adadda0 00000000`00000000 : ffffd000`8adae000 ffffd000`8ada8000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
    STACK_COMMAND: .bugcheck ; kb
    FOLLOWUP_IP:
    nvlddmkm+9bbe2c
    fffff800`b540be2c 803db68aeeff00 cmp byte ptr [nvlddmkm+0x8a48e9 (fffff800`b52f48e9)],0
    SYMBOL_NAME: nvlddmkm+9bbe2c
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: nvlddmkm
    IMAGE_NAME: nvlddmkm.sys
    DEBUG_FLR_IMAGE_TIMESTAMP: 5315b408
    FAILURE_BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys
    BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys
    ANALYSIS_SOURCE: KM
    FAILURE_ID_HASH_STRING: km:0x116_image_nvlddmkm.sys
    FAILURE_ID_HASH: {c89bfe8c-ed39-f658-ef27-f2898997fdbd}
    Followup: MachineOwner
    1: kd> lmvm nvlddmkm
    start end module name
    fffff800`b4a50000 fffff800`b56a8000 nvlddmkm T (no symbols)
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp: Tue Mar 04 19:07:52 2014 (5315B408)
    CheckSum: 00C20523
    ImageSize: 00C58000
    Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  • Pairing problem with Docs to Go and Windows 7

    First, I'm not sure this is the correct forum. I've setup a new Windows 7 laptop and installed Docuemnts to Go (latest version downloaded, no updates needed). An was able to pair with both my iPhone and my iPad. iTunes syncs fine (but that's using a USB cable). I entered folders and files for Docs to Go to sync (the same ones as on my old laptop running Windows XP). Then Docs to Go desktop couldn't find the iPhone and I needed to pair again.  I have reinstalled the desktop application, double checked Bonjour, both laptop and iPhone are on the same WiFi.  But, I can't pair the two devices to sync my folders and files. Dataviz hasn't been any help - followed all their instructions, e-mailed Tech Support and got a reply that said to do exactly what I told them I did!
    Anyone have this problem? Anyone have a solution? 
    It seems to be a problem with one or the other (desktop application or iPhone app) not communicating via WiFi properly.  I'm assuming that that's a Bonjour issue.
    nlc

    Try disabling your security system's firewall (McAffee, Norton or the like).  You can also try this: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Problems with HP Laserjet CM1017 and Windows 8.1

    I have a HP Laserjet CM1017 MFP printer and I just upgraded from Windows 8 to Windows 8.1.
    Now when I go to Control Panel/Devices and Printers/Adjust Print Options, I get an error message:
    "Function Discovery Print Provider DII has stopped working"
    I also get this message:
    "Function address 0x11272fc8 caused a protection fault. (exception code 0xc0000005)  The application property sheet page(s) may not funtion properly."
    How do I fix these errors?

    @tenkeypro 
    First, I would suggest you uninstall the exsisting driver and reinstall following one of these documents to see if it will clear this error message:
    Install HP print and scan software on a Windows 8 computer (32-bit and 64-bit)
    Universal Print Driver (no scan)
    Driver support included in Windows 8 / Windows 8.1 or in Windows Update
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Problems with Nvidia 320.49 and Windows 8.1

    I am having problems with my HP Envy with windows 8.1... Nvidia driver keeps crashing.
    Took the unit to Best Buy and we determined it was with the 320.49 driver - we are
    able to reinstall it, and it will usually last for a few hours before it fails again.  When
    it fails, the resolution reverts to 1024 x XX... not the 1920 x 1260 when it works
    right... very frustrating, but I need to know if the card needs replacement, or if there
    is a fix from Nvidia... Contacted Nvidia and did not get anywhere with them.... can anyone
    help??

    Thank you for the additional information.
    If it is an HP OEM video card, this is the reason that it is not working with the retail nVidia driver.  HP has their motherboards and video cards made to their specs.  Only the drivers developed by them will work with their cards.
    Here are the drivers available for Win 8.1 on the Software & driver download page.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Problems with IS-H*Med and "Windows Vista"

    Hi all:
    I'm having problems with automatic installation of IS-H*Med using a computer with Windows Vista. It doesn't start. I must to install it manually, and when the user request the OCX, it hangs up.
    Any idea?
    Thanks in advance and regards,
    Alejandro Gómez.
    P.D.:  Excuse my bad English.

    Hola Alejandro,
    could you please elaborate on your problem a little bit in detail?
    I suppose, you don't mean the SAP system itself, since as far as I know, it (the application server side) is not supporting Windows Vista at all.
    According to this <a href="https://service.sap.com/sap/support/notes/66971">SAP note 66971</a> only SAPGUI 7.10 supports Windows Vista. Do you use this version of SAPGUI?
    What does not start? SAPGUI? The planning grid?(Which is the only i.s.h.med specific OCX as far as I know).
    Did you open a customer support message for this?
    kind regards,
    anton wenzelhuemer

  • OTP 2FA Problems with DA 2012 R2 and Windows 8.1 Client - Not prompting or OTP Code

    Hi 
    Just seeing if anyone has come across the same issue with their WIn 8.1 clients not prompting for 2FA once configured with DirectAccess 2012 R2?
    I have created the 2x OTP certificates, enabled OTP via PowerShell and set up the RADIUS server but whatever happens the Win 8.1 client does not get prompted for 2FA - They connect seamlessly?
    I have also configured the DAProbeUser on the RADIUS server
    Any help appreciated
    Thanks

    I was afraid that you'll said that
    I hate to be the annoying guy but take a look at this KB article:
    http://support.microsoft.com/kb/2787534
    Applied to: Windows 8\2012,
    Doesn't Apply to: Windows 8.1\2012 R2
    and - for a fact, doesn't include in Windows 8.1\2012 R2 as this bug still exists in those operating systems.
    another annoying fact - No other update was released for these version yet.
    this example approves that not every hotfix \ updates that was released for 8\2012 before 8.1\2012 R2, is already included in 8.1\2012 R2
    and allow me to add another fact.
    when you configure DirectAccess via the remote access wizard it creates a WMI query called
    DirectAccess - Laptop Only WMI Filter.
    after you create it in Windows Server 2012 R2 - look at the WMI Query and you'll see that by default it doesn't apply to version 6.3! the version for Windows 8.1.
    if you want to add the support for Windows 8.1 you have to modify manually the query which is of course, not supported by Microsoft.
    That is just another symptom that makes me wonder if Microsoft did ANY change or update to DirectAccess 2012 R2
    Tamir Levy

  • Rights problem with Acrobat X pro and Windows 8.1

    We have bought a CS6 creative suite, including acrobat X. If we use the acrobat X in cooperation with windows 8.1, then we cannot delete or amend files without needing to save them under another name ....
    If we install the try out of acrobat XI, then we don't have these problems ....
    Message was edited by: WouterGS

    Hello,
    Yes we have done all updates that were still pending.
    After a few day, the acrobat XI gives the same problems ... so I uninstalled the XI try-out and installed the bought X pro version again .... also here all updates have been done ...We really don't know how to solve this ..
    We had the same configuration on a Windows XP and a Windows 7 pc, and there all went without these issues.
    I also have another Laptop with the same configuration Windows 8.1 + XI pro, and there we also don't have the issue ....

  • Problems with iTunes Cover Flow and Windows Vista

    I just recently upgraded my computer to Windows Vista Home Premium (32-Bit). I preformed a clean install and every program I have tried so far (Battlefield 2, Battlefield 2142, Age of Empires 3, Halo: Combat Evolved, Microsoft Office XP, etc.) have worked fine, however, iTunes is having some problems (7.4.1.2). First, cover flow does not work right. It can get it to run, but it is super slow. It ran very smoothly on Windows XP, now on Vista it skips every over album cover and is very choppy. It seems like it is running at 3 FPS. Also, none of my videos will play in Quictime or iTunes. The strange thing is I can play the same videos in VLC and GOM and they work great. I just went to nVidia's web site and installed the latest drivers and my games runs fine so I don't think it is a driver issue but I am not sure.
    Any advice I would appreciate,
    Thanks
    Message was edited by: Full-Throttle

    Full-Throttle wrote:
    I just recently upgraded my computer to Windows Vista Home Premium (32-Bit). I preformed a clean install and every program I have tried so far (Battlefield 2, Battlefield 2142, Age of Empires 3, Halo: Combat Evolved, Microsoft Office XP, etc.) have worked fine, however, iTunes is having some problems (7.4.1.2). First, cover flow does not work right. It can get it to run, but it is super slow. It ran very smoothly on Windows XP, now on Vista it skips every over album cover and is very choppy. It seems like it is running at 3 FPS. Also, none of my videos will play in Quictime or iTunes. The strange thing is I can play the same videos in VLC and GOM and they work great. I just went to nVidia's web site and installed the latest drivers and my games runs fine so I don't think it is a driver issue but I am not sure.
    Well - you're not alone. I've got a very high-end video card (nVidia 8600 GTS OC), and am running Windows Vista Ultimate. Every aspect of 3D acceleration works great with my machine (World of Warcraft, Battlefield 2142, Half Life 2, Counterstrike: Source, etc.), except iTunes/Quicktime. I pretty much have the same issues: videos (all - .mov, .mp4) play absolutely horribly in both applications, and cover flow is slow/choppy at best. I think it's an iTunes/Vista issue that Apple has yet to touch, so I'm just waiting for January (I'll buy my first mac, a macbook pro, then), because for the first time in my life, I'll have an installation of iTunes that functions properly. I love iTunes. Just not on Windows machines. It leaves something to be desired.
    Message was edited by: william.garrison

  • Problems with 802.1x,ACS and Windows Server 2000

    Hi,
    My components: ACS 3.3 running on a Server with Windows 2000 Server SP4 , 2950 Catalyst (AAA-Client) ,
    Laptop with Windows XP SP2 (802.1x Client)
    I have everything configured according to Cisco documentation, but I am getting one error in the ACS's log.( Failed Attempts active.csv)
    Authen-Failure-Code : EAP-TLS or PEAP authentication failed during SSL handshake
    I have a valide certificate on my Radius(ACS) server and about machine authentication I have a valide certificate on my laptop. (I have installed this certificate before i started to login at the 802.1x port of the switch)
    Does anyone have any idea what the problem is?
    Here is the Config of the Catalyst 2950 if that will help:
    version 12.1
    no service pad
    service timestamps debug uptime
    service timestamps log uptime
    no service password-encryption
    hostname ACS-Client1
    aaa new-model
    aaa authentication dot1x default group radius
    enable secret xxxx
    username xxxx privilege xxx password xxx
    ip subnet-zero
    ip ssh time-out 120
    ip ssh authentication-retries 3
    spanning-tree mode pvst
    no spanning-tree optimize bpdu transmission
    spanning-tree extend system-id
    dot1x system-auth-control
    interface FastEthernet0/13
    switchport mode access
    dot1x port-control auto
    dot1x timeout quiet-period 3
    dot1x timeout reauth-period 1
    dot1x reauthentication
    interface GigabitEthernet0/2
    interface Vlan1
    ip address 10.10.3.253 255.255.255.0
    no ip route-cache
    ip default-gateway 10.10.3.254
    ip http server
    radius-server host 10.10.3.1 auth-port 1812 acct-port 1813
    radius-server retransmit 3
    radius-server key radius
    line con 0
    password xxx
    line vty 0 4
    password xxx
    line vty 5 15
    password xxx
    end

    Yes we get to solve this problem. Because it is a only a test senario, we installed everything new, win2000 server SP4,the certificate service and the winXP on the client.
    The config of the switch is ok, we set the reauth-period and quiet-period to default.
    Then we test the whole configuration with the IAS-Radius (MS). After this we install the ACS, following this document:(Certificates were already installed)
    http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00801df0ea.shtml
    Attention, we used the AEGIS Client not the XP Client!

Maybe you are looking for