Problem with Clip Usage and merged clips in CS6

The 'Clip Usage' drop-down menus don't seem to work in Premiere CS6 for merged clips. The info bar at the top of the project window correctly lists the number of times the viedo and audio from the clip has been used, and the downward-pointing arrow appears, but when you click on it... nothing happens. Same's true of the 'Video Usage' column in the main body of the project window. Non-merged clips work just fine.
Anyone know if this is just a problem with my project, or if it's a bug in Premiere? Had a lot of trouble with merged clips in CS5.5, and was hoping they'd be solved by CS6 - I've been using Creative Suite for a long time, and the lack of good merged clips support was always one of the challenges in persuading other indie editors to switch over from FCP...
Thanks!

...and the lack of good merged clips support was always one of the challenges in persuading other indie editors to switch over from FCP...
I guess they just have to weigh that up against the lack of support they got from Apple for FCP in its entirety.

Similar Messages

Problems with Metadata Set and video clip size... I think....

Ok, I can't figure this one out... any help would be much appreciated.
Background:
I started server using the Video Production default customer profile. Then I created a few new metadata Sets including one called Finished Programs which is a media asset.
Problem:
When I upload a video clip and select the Finished Programs metadata set it always changes to the Media metadata set. Now this only happens when I have used MPEG Streamclip to take the video off of a DVD. If I upload a clip (mov) file that I used in Final Cut Pro it works fine.
My settings in MPEG StreamClip are Apple DV/DVCPRO-NTSC 720x480 Interlaced Scaling and Reinterlaced Chroma.
If I upload two clips at the same time and select Finished Programs metadata set, one that I used MPEG StreamClip and one that I digitized into FCP, it will place two clips in FCPserver, one with the Finished Programs and one with the Media Set.
Any ideas on how to fix this????

Could be. If it's not the metadata it must be something else. You would have to figure it out by trial and error. Maybe you should try giving it the highest priority and maybe turn off all automated scans and see if it works then. just to make sure that nothing intervenes with the process while it is going on and see if you can get it to run fully and see what the outcome is then.
I have files over 1 GB that get attached to the right medadataset. I have failures on thumbnail creation to, but FCSvr then starts the same job over and over till it succeeds.
I have never user MPEG Streamclip clips in FCSvr. Hopefully somebody else has and could share their experiences.

Problem with memory usage and CPU usage

Hello,
i have a problem with the memory usage and cpu usage in my project!
My application must run for more than 24 hrs. The problem is that the longer it runs the bigger is the memory and cpu usage!
It starts with ~15% CPU usage and ~70 MBytes memory usage. After ~ 24hrs the CPU usage is ~60% and the memory usage is ~170 MBytes!
After 3 days the CPU usage is almost about 70% and the memory usage is about 360 MBytes!
What can I do to reduce this huge recource usage?
Thank you!

Hi Pahe,
   I think the issue is memory usage, since CPU usage can increase due to greater memory requirements.
   Anyway, it's difficult to debug without seeing your code, can you post it (possibly for LV 7.1 compatibility)? Or just post a JPEG of the piece of code that can give problems...
   I guess you're appending data to an array instead of replace data elements, but I can't be sure...
   Have a nice day!
graziano

Photoshop Premiere 9 vs 13? Are there any problems with CPU usage and crashing?

I stopped using Premiere, because they the computer would freeze and/or the program. I was curious if there was any issue with people currently using Version 13? I think I loaded it on this computer along with Photoshop Elements 9. After a while I just kept Photoshop Elements.
System Specs:
Windows 7 premium home edition
Processor Intel R Core TM i5-2410M CPU @ 2.30 GHz 2.30 GHz
Installed Memory 6.00GB 826 GB free
64 Bit Operating system

stephanies
If 64 bit, while 9 will be a 32 bit application with the limitations of a 32 bit application on 64 bit system, 13 will be a 64 bit application which translates into more computer resources available to 13.
Elements Organizer 9 will not integrate with Elements Organizer 13 although you can convert the 9 catalog in Elements Organizer 13. And there is a marked difference in the workspace between the two versions. Principles tend to stay the same, but features can be moved, changed, or discontinued.
I would have expected Premiere Elements 9/9.0.1 to have worked in your computer environment. Since it did not, I would strongly suggest that you look at the free 30 days tryout of Premiere Elements 13/13.1 in your computer environment to assure the compatibility of it with your computer environment and project goals.
Lots of causes for program crashes (any version).
a. Conflicts with antivirus program.
b. Problem with video card graphics card
c. Use of a pen and table device instead of mouse
d. Problematic source media and format conflicts
e. Not running program as Administrator
f. Poor installation
g. Failure to install QuickTime along with Premiere Elements on the computer
h. Not meeting System Requirements in some way.
i. Other
https://helpx.adobe.com/premiere-elements/kb/system-requirements-premiere-elements.html
Please review and consider. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Sync and merge clips, proper ways and tips please

Hi
Im working on a indie feature and need help with sync and merging clips. So far from my trials Premiere doesn't really sync that well based on audio (plus it doesn't seem to sync more then one set of clips at a time), luckily I have Pluraleyes that syncs in a breeze so that's what I'm using. So, my questions:
1) How do I merge more then one set of clips simultaneously. Look at my timeline. This is from only 3 days of shooting (and we've shoot for 33 days). It will take me forever to merge these...
2) How do I merge clips so they end up in a specific bin in the project panel. Now when I do it the new merged clip ends up at root which is manageable but annoying.
Can someone confirm if this is actually how you work, very laborious or am I missing something?
Thanks!

I'm dealing with the same issue, and would love to know how you've solved this problem, assuming that you kept this same workflow going.

Can anyone please help me, I'm having problems with sound while watching video clips using flash player using Internet Explorer\

Can anyone please help me, I'm having problems with sound while watching video clips using flash player & Internet Explorer

There's a good chance that this is a known issue. We'll have a Flash Player 18 beta later this week that should resolve this at http://www.adobe.com/go/flashplayerbeta/

Does anyone have problems with data usage with att and Iphone5?

Hello, Does anyone have problems with data usage or non usage I should say with Iphone 5 and AT&T?

After 4+ months of dealing with this data usage and battery drain problem that included 3 data captures of my wife's iMac, the trigger for us regarding the problems syncing with iCloud, and 5 hours of logs off my iPhone 6 to be analyzed by Apple engineers that included times my wife's computer was both on and off to demonstrate the difference in data usage and battery drain under those conditions, I can say with very reasonable certainty that the iOS 8.3 and corresponding Mac OS 10.10.3 update has solved the problem.
We have now been running for about 2 weeks and data usage with the iCloud Servers attempting to sync has dropped from a rate of 31 GBs to under 15 MBs per month. Yes, you read it right. We were burning 2000 times as much data doing absolutely nothing important on both of our phones, a 5s and a 6. Just imagine what that does to battery life! The 5s would last about 5 hours and the 6 was dead in less than 14.
The distasteful aspect of this process was how the engineers were quietly fixing the problem at the same time sending messages to my contact person within Apple that were dismissive in nature in the face of indisputable unreasonable results. I must say, this experience with the multiple times the engineers' responses were inappropriate put a little tarnish on the old Apple shine of the ‘It just works’ mantra. This was my first experience in 34 years that caused me to stop recommending Apple products without reservations and with a disclaimer.
Since the update solved the problem, then I can only conclude that there was a logic bug regarding the reaction within the process to the incoming data that was corrected. There was noting short of logging out of iCloud that circumvented the problem for us, Gator5000e and probably many others noted on other threads. I am not trying to imply that this is the cause of everyones battery use problem, but it is reasonable that it was a cause for many.

Problem with sync video and audio

Hi
Problem with sync video and audio
1- capture video ( Telecinema dv pal)
2- conform 25 to 24
3- import timeline audio and video
4- sync
5- Link
6- make sub-clip
7- new name
---- error
Sequence Error: Unable to add clip to sequence.
Possible media limits problem in clip or sequence.
FINAL CUT PRO IS DONE.
HELP ME.
THX

exactly why are you converting 25 to 24?

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

[5800xm] Problem with rSAP usage in Skoda nav-syst...

Hello,
like in the topic: I have a problem with rSAP usage in Skoda nav-system Columbus: it stays ON searching for the car nav-system & eats battery level (just being standby): within 24 hrs completely empty. With bluetooth turned on, without previously connecting to my Skoda nav-system, the phone can run for about 10 days standby.
I tried every setting without improvement, I run the latest firmware/software on my 5800 XM.
Only if I turn off manually the bluetooth subsystem (not just the nav-system connection, but completely turn off bluetooth), then the phone doesn't eat through my battery-level. I dont want that, because it's not neccessary (I have to turn it back on again later & forget to do that), sometimes I forget and find out people can't reach me coz my phone is battery-empty.
Anyways, this situation is already since the beginning when I bought the phone from Nokia store. No improvement since.
Please can anybody help out?
Thnx
Solved!
Go to Solution.

Well, since a few days we're testing the default setting from aspergerguy and now it seems the battery problem doesn't occur no more. Amazing how such a small change of unexpected / undocumented setting can give a device real purpose instead of almost uselessness.
For clarity, again the problem: I am able to use the phone with the carkit-nav system, but after using (ergo: getting out of the car, into our home), the phone eats through the battery within 24hrs.
This now no longer happens with Wireless car kit set as default.
Thanks aspergerguy for your help!
Less thanks Nokia for creating this problem in the first place.
Regards,
Quan

Problems with ListViews Drag and Drop

I'm surprised that there isn't an Active X control that can do this more
easily? Would
be curious to find out if there is - although we aren't really embracing the
use of
them within Forte because it locks you into the Microsoft arena.
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
PM ---------------------------
"Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
Please respond to "Stokesbary, Michael" <[email protected]>
To: "'[email protected]'" <[email protected]>
cc:
Subject: Problems with ListViews Drag and Drop
I am just curious as to other people's experiences with the ListView
widget when elements in it are set to be draggable. In particular, I am
currently trying to design an interface that looks a lot like Windows
Explorer where a TreeView resides on the left side of the window and a
ListView resides on the right side. Upon double clicking on the
ListView, if the current node that was clicked on was a folder, then the
TreeView expands this folder and the contents are then displayed in the
ListView, otherwise, it was a file and it is brought up in Microsoft
Word. All this works great if I don't have the elements in the ListView
widget set to be draggable. If they are set to be draggable, then I am
finding that the DoubleClick event seems to get registered twice along
with the ObjectDrop event. This is not good because if I double click
and the current node is a folder, then it will expand this folder in the
TreeView, display the contents in the ListView, grab the node that is
now displayed where that node used to be displayed and run the events
for that as well. What this means, is that if this is a file, then Word
is just launched and no big deal. Unfortunately, if this happens to be
another directory, then the previous directory is dropped into this
current directory and a recursive copy gets performed, giving me one
heck of a deep directory tree for that folder.
Has anybody else seen this, or am I the only lucky one to experience.
If need be, I do have this exported in a .pex file if anybody needs to
look at it more closely.
Thanks in advance.
Michael Stokesbary
Software Engineer
GTE Government Systems Corporation
tel: (650) 966-2975
e-mail: [email protected]

here is the required code....
private static class TreeDragGestureListener implements DragGestureListener {
     public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
     // Can only drag leafs
     JTree tree = (JTree) dragGestureEvent.getComponent();
     TreePath path = tree.getSelectionPath();
     if (path == null) {
          // Nothing selected, nothing to drag
          System.out.println("Nothing selected - beep");
          tree.getToolkit().beep();
     } else {
          DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
               .getLastPathComponent();
          if (selection.isLeaf()) {
          TransferableTreeNode node = new TransferableTreeNode(
               selection);
          dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
               node, new MyDragSourceListener());
          } else {
          System.out.println("Not a leaf - beep");
          tree.getToolkit().beep();
}

Problems with dropped calls and no reception on Samsung Continuum

My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone. The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference. The phone freezes up frequently, even if no apps are running in the background. We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet. The screen saver kicks in even when we are actively dialing a number, or typing in a text message. The overall performance of the phone is also poor, and it is quite slow much of the time.
We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan. None of my friends with non-Samsung phones are having the same problems with phone reception and performance. I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
I am not upset that my phone has not been updated to Android 2.2. I just want the phone to perform as stated, and not fail at its primary function: making and receiving phone calls. I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care. I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
Thank you.

If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
What carrier were you using with the Razor? AT&T? Same area?
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

Problems with Mail, Safari and iTunes after updating to 10.5.6

Hi all,
after installing 10.5.6 I have problems with Mail, Safari and iTunes.
The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
Any idea or workaroung to solve that problem?
Regards
Michael

First, run Disk Utility and repair permissions and then restart.
I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

Problems with the richTextEditor and quotes

Hello
I'm having problems with quote chars and the richText
control's htmlText. When users enter quotes into the richTextEditor
control. The quotes breaks the HTML text, meaning it's no longer
well formatted. Is there an escape char that I need to use. Or do I
need to force some kind of refresh on the control prior to using
the htmlText string?

I have been using RTE in a content management system and
found a need to replace non-standard quote characters with proper
UTF-8 character counterparts. Curly quotes in particular are
problematic. Use a replace function to substitute non-standard for
standard characters.

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

Problem with Clip Usage and merged clips in CS6

Similar Messages

Maybe you are looking for