Problem with closing other firefox windows when window in use has more than 1 tab open

If I have multiple firefox windows open, and the one that I am using has more than one tab open, when I try to close one of the windows that I am not using by hovering over the firefox icon on the taskbar, then clicking the cross on the other windows, a message appears asking me if I want to close a window with more than one tab open. This means that firefox is trying to close the window that I'm using, not the one I'm trying to close. Please note this only happens when I hover over the icon on the taskbar then click the cross for the window I want to close. If I open the window properly, then click the cross on the window itself, it works fine.
Just wanted to know if anyone else has this problem, and if they do, then mozilla should probably fix it in their next update, it's getting really annoying now

I can't find a bug on file for this on https://bugzilla.mozilla.org/ (although there are many taskbar-related issues under review).
(1) Just to confirm, do you both have "Show tab previews in the Windows taskbar" turned off here:
orange Firefox button (or Tools menu) > Options > Tabs
(2) Have you tried disabling Firefox use of hardware graphics acceleration?
You usually need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
orange Firefox button (or Tools menu) > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
If you restart Firefox, do you notice any changes?

Similar Messages

Problem with my 875P NEO FIS2R when tyring to use x4 Crucial 512MB DDR modules

Hi all
I have a problem with my 875P NEO FIS2R when tyring to use x4 512MB DDR modules. At first the system seem fine then it just hangs on me. All modules are exactly same and I have tried updating my bios and adjusting the settings but nothing works. My system is fine when using x2 512MB moduels. I have searched the forum and found no clear answer although there are other people with this problem. Please can anyone let me know if there is anything I can do with my current configuration to make the x4 512MB DDR work?
From other posts I have learned so far that I either have to buy Paired modules from the manufacturer (which is no use because I bought my first x2 DDR a year ago) or only use x2 and now Dabs isnt taking the other x2 that I just bought because there is nothing wrong with the modules themselves (its the mobo).
I built my system from scratch and wouldnt have been able to have done it without previous assistance so thanks in advance for any help

Relaxing the timings will enable your RAMs to run at higher latencies so that they do not need to go extra mile to catch up with the transfer rates with the FSB.
Lowering the frequencies is like underclocking a speedy twin turbo to a standard single turbine which means lowering of speed so that the RAMs can run lower than expectations which'll be able to provide room for o/c'ing back near to its original frequency.

Slow script warning when prompt choice list has more than 100 elements

Hi,
Has anyone experienced this issue in Internet Explorer version 7 and above? If the prompt has more than 100 elements (my current use-case), the prompt does not get rendered and I get the slow/busy script warning in Internet Explorer. I have not experienced this in Firefox or Chrome.
Any help is appreciated
OBIEE 11.1.1.5

Thanks you, friends!
That to resolve my issue, i made next things:
1) turn off a limit items for my list
2) used SPQuery.ListItemCollectionPosition
property,
3) and corrected little mistake in my CAML Query.
May be a punkt #2 will be enough, don't you :)
from MSDN forum...

Maintenance Windows - When a client belongs to more than one collection

Hi,
I am a little confused with maintenance windows as I have never had to use them before. I have client that belongs to Collection A with no maintenance window, and Collection B with a maintenance window. I typically push out apps during
the day (after they have been tested) so I never use maintenance windows. I am deploying an application to Collection A (no MW), but it shows in the status that it is waiting for a maintenance window. I assumes it's in this state due to me creating Collection
B with a maintenance window because I need to push something out this weekend and can only perform this from 10pm to 2am. If you are deploying an app to a collection, shouldn't look at the maintenance window for THAT collection, instead of
looking at all the NW for collections a client is added to? Is there anyway around this?
Thanks!

Maintenance Windows are applied to and enforced by the client agent itself. The client enforces the MWs on any and all activity it performs regardless of collection targeting. In fact, clients don't know anything about collections at all.
Jason | http://blog.configmgrftw.com

Problem with iTunes installation - Error Message when trying to use

I intalled iTunes on my Dell Laptop. The icon is on my Desktop, but when I try to start it, I get the following error message;
"iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."
Then the error message wants me to send some message to microsoft?

You can't do that. Instead, just remove "aaa new-model" from the config then try to deploy it. Alternatively, you can try "merge mode," but that will send the whole config back to the device.

Having problems with phone getting too hot when not in use

Hi there -- I'm trying to figure out what I can do to fix this. Recently I had to get a replacement S3 because my original shut off mid-use and wouldn't turn back on. The replacement has been here for about a month and in the last 2 weeks I'm having issues with it getting too hot. The first time it happened, I had it plugged into the stock charger for about 1 1/2 hours - and I had picked it up expecting it to be fully charged but it was extremely hot and had a warning on the main screen saying that the battery was critically hot and was not charging and the phone was nearly completely dead. I unplugged it, took the battery out and let the main phone body cool down. After about 15 minutes, the body felt like room temperature again, so I put it all back together. It turned on, charged normally that night and all was well.
Now for the last several days, I'm having issues again with it getting hot at random times when I'm not even using it (and not charging it). The last time, I downloaded a temperature app and it said the phone was nearly 105 degrees, and it felt the hottest right at the home button. Later that night after it cooled down, I noticed that the battery wasn't charging at all and was depleting rapidly on the charger. I restarted twice with no change and then took the battery out and let it sit for several minutes. After that it began charging again.
With it getting hot so much more often now, I'm starting to worry about this happening when I need my phone for an emergency as I spend a lot of time on the road transporting my kids to school and activities. Is there a fix for this? It doesn't appear to be the battery because my husband and I have the same phone and I've already swapped batteries with him - same issue for me, no issue for him. Please help? Thanks!

Hello Micheliu813, let's get to the bottom of this together! Are you using the same charger that came with the phone or a 3rd party charger? We can also test the phone in safe mode to see if the device heats up again. Check here for steps: http://vz.to/1kb9LUM
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

How to map when the Context node has more than one element

Dear SDN Community,
I am develping a WebDynpro java application with Adobe forms. My goal is to present a user a screen with 10 records of customer details and submit. I have created a context element for the customer(Cust#, address details etc) and mentioned the cardinality as 1..n. Now How do I bind these 10 records in my data view to first element, second element... 10th element of the context. Once the user submits, I need to write the 10 record values to Z table. Can you please advice me here.
Thanks!
Surya.

solved this problem by going through the Interactive forms tutorial.

Solution Center problem with HP Office Jet J4550 and windows 7 (64bit)

Hello All,
I have a problem. I have the Solution Center and a HP Office Jet J4550 and windows 7 (64bit). When ever I open the solution center, the solution center says " HP office jet J4550 series disconnected" When I open HP document manager, I can access the printer. Additionally, when I run the HP Print Diagnostic Utility 4.0, it sees the printer, no issues. I can print test pages. No issues. I downloaded the latest driver from the HP site (OJJ4500_Full_13, 299,359KB) Your insight is appreciated.
Thank you
Roy B

I have a similar problem with the J4580 and my new Windows 7 64-bit laptop. HP Solution Center says that the printer is disconnected. Furthermore, it can print some documents (short ones), but it was unable to print a 1-page 5MB pdf file. The printer truncated the page after printing just the top 10%. The printer is OK with my wife's Windows 7 32-bit laptop.
I've seen many other people complain about similar problems in this and other forums. Apparently the driver for J4500 printers is not compatible with Windows 7 64-bit. Can HP please provide an updated driver or patch?

Hanging problems with JRE 1.4.0 and Windows 2000

We have written a Java application which is an editor using Swing components. Most of us happily run it on Windows 2000 PCs with a decent PC spec of 512 Mb RAM and 1 Gb Processors and Java JDK 1.4.0 installed. However, other users with smaller spec PCs of 128 Mb RAM and 450 MHz processors and using only the Java Runtime Environment v1.4.0 keep making the application hang.
I've done plenty of debugging and investigation and am now convinced that this is not our application software that is causing the problems - the hangs are never consistent in their behaviour. I don't think that lack of memory is the problem either as it hangs with no other application running and it only uses a small amount itself.
So what could cause this problem ? Is there a significant difference between using the JDK and JRE ? Could it be PC spec ? Are there some config settings that I should check ?
Any help would be appreciated as the application has become unusable for our users when we seem to be having no problems at all !
Sarah.

I have been tring to track down a similar problem for quite some time, with no luck as of yet. On 4 out of 6 machines running Windows 2000 Pro, any application that I write using any graphical component AWT or Swing, will hang at run time using JDK 1.4. I have no solution for you but I am hoping this message might spark some more advice.
Bryan

I have upgraded to the latest firefox v7.0.1 for windows, when i click on its icon it doesnt open up? I uninstalled it and then reinstalled it but nothing happend it still doesnt work?

I have upgraded to the latest firefox v7.0.1 for windows, when i click on its icon it doesnt open up? I uninstalled it and then reinstalled it but nothing happend it still doesnt work?

Sorry you are having problems. First of all try Fifrefox's safemode.
*[[Troubleshoot Firefox issues using Safe Mode]]
If that works post back for further advice.
Next step, if safe mode did not work.
First: Try a clean install, (you have had a none standard version installed previously) that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
See
* this recent post [/questions/940399#answer-377134]
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Second: try a New Profile
*http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
* this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
**[[Back up and restore information in Firefox profiles]]
* Until you are absolutely confident about the repercussions I suggest
** always use an empty folder when creating a new profile
** never delete or rename profiles, just disable or remove shortcuts
** after creating a new test profile open it and check for any addons or plugins that may be have been included by default

PS CS5 Extended on Windows - When trying to use the clone stamp and/or healing brush as soon as I move the cursor over the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush. W

PS CS5 Extended on Windows
When trying to use the clone stamp and/or healing brush as soon as I move the cursor from the toolbar over to the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush. This just started tonight. What's causing this weird behaviour?

What are the settings in Window > Clone Source?

Problem with this new version is when i open firefox something change my home page to mozila defalut page and in the new tab open mozila firefox first run page.Sorry for my bad English

Problem with this new version is when i open firefox something change my home page to mozila defalut page and in the new tab open mozila firefox first run page.Sorry for my bad English

Sounds like this issue:
* http://kb.mozillazine.org/Preferences_not_saved
* [[Preferences are not saved]]

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I had some problems with my pc, since then when I close Firefox it won't reopen unless i go to Task manager and end the process for FF.

I had some problems with my pc, since then when I close Firefox it won't reopen unless i go to Task manager and end the process for FF. I have uninstalled FF and re-installed it and no change.
Walt

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the photo editing section,and no other application. My mouse drivers a

Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the photo editing section,and no other application. My mouse drivers are up to date.Any help or advice would be most welcome.

Good day!
Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements
and please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
Regards,
Pfaffenbichler

Problem with closing other firefox windows when window in use has more than 1 tab open

Similar Messages

Maybe you are looking for