Problem with .cmd/batch file, while scheduling RMAN backup

I am running Oracle 10g on Windows. I Have written RMAN Backup script & saved it as .cmd file. Now i will schedule this via AT utility on windows. While i try to run this .cmd file then after starting RMAN it does nothing, neither RMAN gets connected to target database nor backup gets started. What may be the problem??
Contents of .cmd file are like this:-
RMAN target 'sys/manager@test'
backup database include current controlfile;
backup archive log;
Message was edited by:
user648257
Message was edited by:
user648257

RMAN target 'sys/manager@test'
backup database include current controlfile;
backup archive log;will not work. You are passing 3 different commands to the Windows command interpreter. CMD executes the first command 'RMAN target ...@test" and waits for it to complete before it will proceed to attempt to execute the "backup database".
That is, the "backup database" command isn't being passed to RMAN at all.
You should put the two "backup" commands in a script file (as you would do for an SQLPlus script file) -- eg backup.rmn and execute it with rman
eg
rman target 'sys/manager@test'  @backup.rmn

Similar Messages

  • Upgrading to Mt.Lion - How do I ensure no problems with ownership of files while only copying some documents over?

    I have a macbook pro 2011 and I'm planning to upgrade to Mountain Lion when it is released. I currently have time machine backed up on an external hard disk. However I do not want to do a full restore after upgrading to Mountain Lion, but i do want to extract certain files from the time machine backup. Is this possible?
    The last time I tried copying files from a time machine backup from another mac to this mac, I had permission issues with files. How do I prevent these issues? I read online about something called setup assistant but does this just copy over user accounts? Does it copy the home folders too?
    Thanks for the help

    The setup assistant copies the entire user folder. You can't pick and choose.
    A "Clean" install is generally a complete waste of time. Depending on what you want to leave behind, it might be simpler to just remove that stuff after the fact. No issue with permissions that way.
    But, if you really feel like doing that, you'd have to do the Browse Other Backup Disks thing with Time Machine and restore what you want. Just restore to the Shared folder, then move to your home folder. That should mark them as owned by you, and not the old user. I've only done single files, so I don't know what might happen with folders full of stuff, like the iPhoto Library.
    Having erased the drive, you'll have to reinstall all of your software. The iLife apps come with a Mac, so they won't get installed with Mountain Lion. You'll have to reinstall those from the App Store or Disk if that is the case.
    I don't know what happens when you try to restore your bundled iLife apps, but this article indicates it is possible: http://support.apple.com/kb/HT4718

  • Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use  cmd+ r  when restarting. Is this the right way?

    Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r  when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

    Your Mac runs maintenance in the background for you.
    Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
    No idea why that was suggested.
    You may have a third party video player installed that's causing an incompatibility issue.
    Check these folders:
    /Library/Internet Plug-Ins/
    /Library/Input Methods/
    /Library/InputManagers/
    /Library/ScriptingAdditions
    ~/Library/Internet Plug-Ins/
    ~/Library/Input Methods/
    ~/Library/InputManagers/
    ~/Library/ScriptingAdditions
    The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
    To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

  • Tempo problems with imported wav files

    Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
    Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
    So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
    I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
    Thanks for the help! I really appreciate it.

    Hi,
    First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
    Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
    regards, Erik.

  • Problem with uploading a file in Clustered Environment

    Hi,
    I have a problem with uploading a file in a clustered environment. I have an iview component which facilitates an upload action of an xml config file. The problem is that the upload of the modified XML file is reflected only in the central instance of the cluster and not in the dialog instances. The dialog instances hold the old config file.
    Is there any solution to upload the file to all the nodes in the cluster.
    Thanks
    Kiran

    Hi,
    This is a known problem with clustered environment. Remember that your portal component runs on just on dialog instance and it doesn't automatically have access to the other nodes.  However, there are some ways to get around this
    1. Use KM to store files. KM is a common repository for all application servers and therefore you needn't worry more
    2. Use an external batch oriented product (suresync/robocopy) to synch folders on the different DIs. You basically use your existing portal component, but there is a batch job which makes sure the upload folder is identical on all DIs (however, there is a slight delay depending on how often you run the batch job)
    3. Store the files on a shared disk directly from the portal component.
    Cheers
    Dagfinn

  • HT1338 I have a problem with opening downloaded files from the internet; zip types. Can you tell me an app to open these types of formats of files?

    I have a problem with opening downloaded files from the internet; zip types. Can you tell me an app to open these types of formats of files?

    It should unzip if you double-cick.
    What are you seeing happen when you do that?
    Select a .zip file in the Finder and Get Info (cmd-i). What is set for it to Open With. It should be Archive Utility.

  • Problem with finding a File

    Hi:
    I am having problem with finding a file on the OS
    (using Win2000) when given an absolute pathname;
    here is the rough code:
    //theFile is specified at command line
    File f = new File(theFile);
    BufferedReader in = new BufferedReader(new FileReader(f));When I run the program, I type
    java myProgram C:\aFolder\theFile
    But it can't find theFile. I am not sure what's wrong.
    Thanx

    No that can't be it; he takes the filename from the command line, so escaping isn't an issue (unless he used a shell that unescaped '\\' for him, but I think he's using the win2000 cmd shell).
    Dunno, I have no idea of your filesystem or shell. Just do some debugging, around the lines of:
    File f = new File(theFile);
    if (f.exists()) {
      System.err.println(theFile + " exists.");
    } else {
      System.err.println(theFile + " doesn't exist.");
    }

  • Sqlplus commands from withing the batch files

    Hi,
    Oracle9.2
    need to execute the sqlplus commands from withing the batch files without calling the .sql file separately . How it can be done ?
    With Regards

    Hi,
    I agree with you...but as per your solution, after all you are calling the .sql file while connecting the sqlplus which I know already and I don't want to execute the sql commands like that as shown below.
    For example:
    for shut down the database and starting it again .sql files will be called as shown below
    Note: shutdown.sql file will contain simple database shutdown command.
    sqlplus -s "sys/%password%@%tnsname% as sysdba" @D:\shutdown_db.sql
    and again for restarting the db i will perform as below
    sqlplus -s "sys/%password%@%tnsname% as sysdba" @D:\start_db.sql
    But I want to get it executed directly from the DOS batch file.
    The thing is I want to execute this both the above database commands from the batch file itself without calling the .sql files separately as shown above.
    is it possible, so how it can be done ?
    Regards
    Edited by: user640001 on Feb 9, 2011 9:53 PM

  • Problem with preview PDF files on Windows 7 32bit

    Hello,
    in my office I have a problem with preview PDF files on my computers. The files are allright, but if I select a file and click on preview mode after ~ 10sec operation system write something "Preview this file is corrupt for PDF Preview Handler wrong". On other 64bit computers with same programs the preview is work. I try uninstall all Adobe soft (Reader, Flash), clean all Adobe data from folders in root and in register, but it is not solve this problem. On Microsoft forums wrote me, that the problem is probably with AR plugin.
    So, can someone help me?
    Config PC:
    Windows 7 32/64bit Pro
    Intel i3, 4GB
    Adobe Reader 11.0.5
    Adobe Flash Player 15 ActiveX
    Adobe Flash Player 15 plugin
    Preview Handler Surrogate Host ver.: 6.1.7601.17514
    Thank you for help.

    I think I figured it out after reading other forums. Thanks!

  • Problem with printing pdf file

    hello,
    lately i have problem with printing pdf file:
    i click on the print button and the respod is very slow
    it takes more than a minute till the print window apears.
    i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
    other programs i'd working much faster.
    please advice,
    thank you

    No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

  • Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

    Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

    haben
    From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
    A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
    Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
    User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
    presets there for the QuickTime choice there.
    What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30)  or something else? Do you know if this camera is recording with a variable or
    a constant frame rate?
    Please review and consider and then we will decide what next.
    Thank you.
    ATR

  • I can not do the update , what should I do to fix this error ? "There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

    I can not do the update , what should I do to fix this error ?
    "There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

    Hi,
    Please refer to the help document below:
    Error downloading, installing, or updating Creative Cloud applications
    Regards,
    Sheena

  • InDesign CS5 causing problems with InCopy assignment file but not content files

    I'm having a strange InDesign/InCopy CS5 issue (Mac OSX 10.6.6; all system & Adobe updates are current).  In my InDesign doc I have one assignment file containing two content files. All of the InCopy pieces work fine in InDesign (i.e., I can check out/in, edit, etc.).  When I go to open the assignment file in InCopy, InCopy starts to open  it but then crashes. If I try to open each content file directly in  InCopy, no problem. I've tried deleting and recreating new assignments  in InDesign, but they all have the same result in InCopy.
    I think this actually is a problem with the InDesign file because if I export the InDesign file to IDML, then try to open the IDML file, InDesign crashes! I've trashed my InDesign preferences, made sure all cross-references are up to date, etc. Anybody have any ideas what else to look for in my InDesign file that might cause this problem?
    Thanks!
    Andrea

    Thanks John!
    1) Here are the first 10-ish lines from the crash report that is generated when I try to open the IDML file:
    Thread 0 Crashed:  Dispatch queue: com.apple.main-thread
    0   ???                               0xa0c266f0 _XHNDL_trapback_instruction + 0
    1   com.adobe.InDesign.Indexing       0x20778192 GetPlugIn + 341394
    2   com.adobe.InDesign.Indexing       0x20779009 GetPlugIn + 345097
    3   PublicLib.dylib                   0x0129228b CScriptProvider::AccessProperties(IScriptRequestData*, IScript*) + 571
    4   com.adobe.InDesign.Scripting      0x1f4befe8 GetPlugIn + 166440
    5   com.adobe.InDesign.Scripting      0x1f4c2e31 GetPlugIn + 182385
    6   com.adobe.InDesign.INXCore        0x20641444 GetPlugIn + 45220
    7   PublicLib.dylib                   0x0142c9e8 CScriptDOMElement::GetMultipleAttributes(K2Vector<IDType<ScriptID_tag>, K2Allocator<IDType<ScriptID_tag> > > const&, adobe::version_1::vector<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > >&) + 280
    8   PublicLib.dylib                   0x0142bd38 CScriptDOMElement::InsertProperties(adobe::version_1::vector<KeyValuePair<IDType<ScriptID _tag>, ScriptData>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, ScriptData> > >&, adobe::version_1::vector<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&, short, short) + 1336
    9   PublicLib.dylib                   0x0142beab CScriptDOMElement::SetSimpleAttributes(adobe::version_1::vector<KeyValuePair<IDType<Scrip tID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&, short) + 91
    10  PublicLib.dylib                   0x0142c0d3 CScriptDOMElement::SetAttributes(adobe::version_1::vector<KeyValuePair<IDType<ScriptID_ta g>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&) + 51
    11  PublicLib.dylib                   0x0142a2ea CScriptDOMElement::SetAttribute(IDType<ScriptID_tag>, DOMAttributeValue const&) + 202
    2) That works. Moved all pages (frame threading was preserved) to a new doc, exported to IDML, opened new IDML file just fine. Woo hoo! One of my editors won't be pleased that all of the tracked changes have disappeared, but at least the file functions now
    Wish I knew what caused the problem in the first place so we could (hopefully) prevent this from happening again. Any ideas?
    Thanks again for your help!
    Cheers,
    Andrea

  • Problem with printing txt file

    I have a problem with printing txt file. My code looks like :
    String filename = something.txt";
    DocFlavor flavor = DocFlavor.INPUT_STREAM.AUTOSENSE;
    PrintService[] services = PrintServiceLookup.lookupPrintServices(
              flavor, null);
    PrintRequestAttributeSet pras = new HashPrintRequestAttributeSet();
    pras.add(PrintQuality.DRAFT);
    pras.add(new Copies(1));
    pras.add(MediaSizeName.ISO_A4);
    pras.add(Sides.ONE_SIDED);
    pras.add(Chromaticity.MONOCHROME);
    PrintService service = ServiceUI.printDialog(null, 200, 200,
              services, services[0],
              null,
              pras);
    if (service != null)
    try
    DocPrintJob job = service.createPrintJob();
    FileInputStream fis = new FileInputStream(filename);
    DocAttributeSet das = new HashDocAttributeSet();
    Doc doc = new SimpleDoc(fis, flavor, das);
    job.print(doc, pras);
    Thread.sleep(10000);
    catch(FileNotFoundException e)
    catch(PrintException e1)
    catch(InterruptedException e2)
    It doesn't work :(
    What is my purpose: I would like to print .txt file but I would like to get PrintDialog where I can choose PrintQuality, Chromaticity etc. I found also that I should use DocFlavor.INPUT_STREAM.TEXT_PLAIN_HOST but I don't know how.
    I will be very gratefull for help :)

    I tested it on 3 printers (different models of hp). 2 of them don't give me any error but when it started print priter stoped (just as it dosesn't have a paper), but 1 of them doesn't react (there were no errors), i thought tahat something was wrong with printers but when I change DocFlavor.INPUT_STREAM.AUTOSENSE to DocFlavor.GIF and filename to dog.gif it works so mybe there is another way to print txt file

  • For the last 2 days whenever I try to upload photos from my iPhoto page to facebook I get an error message: Bad Image There was a problem with the image file.  I haven't knowingly changed any settings on iPhoto or facebook. Can anyone help, please ?

    I need help with uploading photos from iPhoto to facebook. I could do it till 2 days ago. Now any new photo I try to upload gives me an error message:
    Bad Image
    There was a problem with the image file. 
    Please help.

    Can you drag it to the Desktop?

Maybe you are looking for