Problem with Codec - QT7 does not recognize it
I'm trying to play a video with the basic version of QT 7.0.4 (didn't go to PRO yet) and the movie does not play.
I installed the codec's and still doesn't work.
The movie info was:
DX50, 528 x 304, Millions
MPEG Layer 3, Stereo, 48.000 kHz
And I had in the folder HD/Library/Quicktime:
DivX 6 Decoder.component
DivX 6 Encoder.component
AppleIntermediateCodec.component
In another try the movie info was:
XVID, 544 x 304, Millions
MPEG Layer 3, Stereo, 44.100 kHz
And I had in the folder HD/Library/Quicktime:
XviD_Codec v0.5.1.component
AppleIntermediateCodec.component
I tried all combinations of codec's (including 3ivx) and did not work.
Does the basic version accept 3rd Party codecs?
Any ideas?
Thanks,
J.Ricardo
Hello JC,
The reason the movie will not play is because that's how Apple grabs you by the yang and twists. QT will not play AVI files until you purchase QT Pro, but it gets better. When you do purchase it, it will only work for the life of the lastest version of QT. As soon as a newer version comes out say QT 8, the QT Pro you now have for QT 7 will no longer work. That's why I'll never get QT Pro.
JerBear :-})
Similar Messages
-
I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. There's only a few things that could be my passcode, but because it disables for an hour, it is time consuming trying to figure it out. What do I do? I do not care about having to erase everything since it's new and there's nothing on it, but it was never synced with iTunes.
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?
I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch. -
I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes imei: 01******206
<Personal Information Edited by Host>لدي جهاز ترقفت الشبكه ويعطي جاري البحث وتم تحديثه ولم يتم حل المشكلهة والان الجهاز لايقبل التنشيط والايتونز لايتعرف عليه امل تنشيطه 013619004986206
-
Problems with Tomcat Server : Does not respond (Sometimes) - Plz Need Help
I have a web application running on Tomcat 4.1.31. (SUN/Solaris)
Clients access through iPlanet Web Proxy (SUN/Solaris).
Theres a class that build a generic form (it return html codes) then it's affected in the JSP page :
MyClass class = new MyClass();
<%= class.getHtmlCode() %>
the size of the form is variable (100Ko to 1,5Mo)
When i m using the proxy, sometimes the server does not respond when he do the affectation <%= class.getHtmlCode() %>.
If i call the page without proxy it work.
The problem seem not depending of the size of the form. Without proxy it always work. And with proxy sometimes the server does not work.
Please need helpOriginally Posted by scum
Hey All,
Need some help with ZDM7 PXE preboot services.
Currently running a netware 6.5 server in VLAN1
PXE client sitting in VLAN2.
DHCP Server is running on VLAN3
IPHelper is running
DTS.ini, PDHCP.ini and TFTP.ini are unmodified.
I have had networks put an IPHelper in place and my client successfully picks up an IP address. The screen displays the "BOOT SERVER IP" correctly and the clients IP details are correct.
I watch the top of the screen where the Timeout counts down and eventually gives this error.
"Error: The server did not respond as requested in time
ZENworks shutting down...
Press any key to continue..."
This happens on every machine i have tested. If i hold down the Ctrl+Alt keys, then the imaging menu appears, i can select maintenance and the client will pull down the initrd, etc.. fine.
if i disable the IPHelper, move the client to the same VLAN as the server, then the whole process works perfectly.
not sure where to go from here.
help please ;)
leon
Hi Leon,
If you are getting the ZENworks menu when holding down the Ctrl-Alt keys, PXE/PDHCP seems to be doing the right thing. Routing issues also don't seem the case as you can pull down the first PXE boot files....
The server running PXE, I assume it also runs the TFTP and Imaging services?
These services are also running a recent version of Zen 7 (IR3/IR4)? A little more info on these components and what server they are on would be good :)
Cheers,
Willem -
How do fix problem with iPages - type does not enter - ?
How do I fix this problem with Pages - type from keyboard does not enter ? If I need to re-install, How do I do that?
Hello DonAndNorma,
You may need to uninstall, then reinstall the Pages application. Steps for doing so can be found in the article linked below.
OS X Mavericks: Install, update, and uninstall apps
http://support.apple.com/kb/PH14299
Cheers,
Allen -
Nokia N8 with Nokia Belle does not recognize heads...
My headset (WH-701) is no longer recognized by my nokia N8 after I had updated to nokia belle. I first have to put my headset into the 3,5 mm AV connector before being recognized, and even then the headset may stop working after a few minutes. Once the headphone is working I still cannot make use of the (music)buttons on the headset (louder, softer, next, previous, etc.) Please can someone help with this problem? There must be a solution for this? I am using the headphones every day.
I know that already started on several topics, but Nokia has still not responded to this problem!
Thanks in advance for your help hi there mate,
if you are having problems with your phone, you can try checking via the phone itself or via Nokia Suite, if there are any firmware updates available, and to please update to the latest version offered. If there are no updates, try re-installing your current firmware, and if that doesn't work, then Restoring to factory settings. Failing that, perform a three-finger hard reset and if that doesn't work either, then you will need to take your phone to your local Nokia Care point for them to inspect.
to locate local Nokia care: http://nokia.com/support
Remember to backup all personal data first -
When Trying to download a word file I get this error message: " *.doc could not be opened, becasue the associated helper application does not exist change the association in your prefernces. " Have checked preferences, and IE opens up the file pointing to something wrong with firefox.
I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.
-
Setup Problem with 8500a, computer does not sees printer, but printer sees router
When updated my wireless router (AC 1200) my 8500a had to go to the "guest network". The printer sees the router and prints the test pages fine, the computer does not see the printer and I can not print. During the setup, when I enter the IP address off the printer, the computer does not find it. What can I do? I am running windows 7 premium.
Hi 776,
I understand that you're trying to setup your printer. Is the computer you're trying to connect to the printer on the same guest network as the printer? -
I had to buy a new printer when I got my Imac and I chose the Brother multifunction inkjet MFCJ470DW. It worked fine when my Mavericks version was 10.9.1, but after the automatic update to 10.9.2 the computer no longer recognizes the brother, or says it isn't connected, and when I deleted it from printer preferences and attempted to re-enter it as default printer, I cannot even type anything into the list of printers when I press the + sign to add. What am I doing wrong? Can someone please tell me even how to add text into the printer preferences list?
I had some of the same issues your having, deleted the printer from Printer and Scanner in System Preference.
What I ended up doing was connecting the printer with a USB cable like it was a new set up, down loaded the drivers from Apple, still did not seem to work, but did a coupel of restarts and the printer was found then I completed the set up. -
HP Officejet 4500, problem with printer. Does not print and no files to be printed in the que
Hp all in one printer I send documents to be printer, but nothing will appear in the "see whats printung menu. This usually happens when I try to print from incoming documents/menus. Most print jobs from Word when from my own computer will print, but not from outside sources. Help
Hello,
Are you trying to print those external documents also from Word or different application. If different application, please ensure before clicking the print command correct printer icon is selected.
I work for HP but my posts and replies are my own.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution -
Problem with JuniperSetupClientInstaller. Does not run, only save option
Firefox is a optional application used in our organization. There about 2000 Firefox users. We have VPN portal running from web interface, which uses Juniper Client to connect intranet. Until Firefox version 6 it was working ok. Since Firefox 7, whenever we launch the portal, instead of running the add-on JuniperSetupClientInstaller.exe automatically, it asks to save file. I save it, run it and relaunch the Firefox and go to the portal. And I get the same "Save" prompt. The site requires Java and this plugin. Java is installed but I can not get this plugin work. It works fine with IE and it works in Firefox with "IE tab 2(3.5.9.1)" enabled for this site, which is pretty much the same IE running on the background
Do you have the latest update? how accurate is your GPS?
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
New laptop with Windows 8 does not recognize my Playbook. I had it working before on Windows 7.
I have had my Playbook connected in the past and was able to transfer files with the WIFi switched off. On my new laptop with Windows 8 there is no recognition in "Computer" and Blackberry Desktop Software shows no connection.
Is this a Windows 8 problem?See:
http://support.apple.com/kb/TS3716
If you need further help, post in the iPod Nano forum. This is the iPod touch forum. They use different drivers. -
Why can I not download my new purchases from i-tune onto my i-pod nano after I pûrchased a new laptop with Windows 8?
See:
http://support.apple.com/kb/TS3716
If you need further help, post in the iPod Nano forum. This is the iPod touch forum. They use different drivers. -
followed support steps (sudo) to recover itunes sync authorization "permission error" but did not work
i tried both steps but did not help: "disk utility" first aid and iTunes: Missing folder or incorrect permissions may prevent authorization.
Maybe you are looking for
-
How can I compare the actual and expected values in Unit testing when they are XML files?
I have created a unit test for a method in VS 2008. My expected value and actual value are XMLs. Therefore though the output is same as I expect it gives an error as I am doing string comparison now. How can I compare these 2 XMLs in expected output
-
Power book G5 flashing ? mark with file icon !
My power book G5 is showing a flashing ? mark in the middle of a file icon, it doesn't want to respond to any disk's or function keys, please help.
-
My compter says there is and apple ipod attached but it is not showing up in itunes and another box pops up and says it needs files then wants me to bowse and find them what do i do? Thanks
-
How connect 2 Mini's to one usb printer
Can a double usb plug at the printer be used with a separate usb cable from each printer (separate Mini's different systems on opposite sides of the room with printer inbetween) or is it necessary to have a powered usb hub at the printer to do that?
-
Wage type getting posted to wrong GL
Hello, We have a problem with the Posting Program. We have defined a service category field in the Org assignment infotype.(Indirect/Direct) based upon which the employee's salary gets posted to either Indirect GL or Direct GL's. This functionality w