Problem with codec!

i have problem with video with codec Xvid and format avi... when i import video to the premiere cs6 than clip not play sounds and video is faster then original..where is problem ? thanks

Xvid/Divx are output files, not meant to be edited (variations of the MPEG4 codec, often used for Internet streaming video) so, they mostly do NOT edit well (if at all) in any flavor of Premiere, even if wrapped inside an AVI container
Even STAFF says so! http://forums.adobe.com/thread/1441404?tstart=0

Similar Messages

HT3775 I'm using version 10.7.5 OSX. I can't play or use the normal AVI recently. Some problem with (codecs version incompatible with OSX) Please give me some help. I'm in Vietnam and to have a real place to have stuffs from Apple is ****-

I'm using version 10.7.5 OSX. I can't play or use the normal AVI recently. Some problem with (codecs version incompatible with OSX) Please give me some help. I'm in Vietnam and to have a real place to have stuffs from Apple is ****…

I would recommend that you download and install the excellent and Free "VLCPlayer for Mac", which reads many more types of files for video than Quicktime Player:
http://vlc-media-player.en.softonic.com/mac

Problems with Codec in Premiere Pro 5.5

Hi All.
I've been having problems with Premiere Pro 5.5 and in partucular the 'Intel IYUV Codec'.
I originally created a project in PP version 5. Then converted it to 5.5. All was working well until one day I went into work in it and it would not work. A message came up "THis project contained a sequence that could not be opened. No sequence preview preset or codec could be associated with this sequence type"
I found some posts in this forum that suggested fixing some of the offending sequences, which I did and it seemed to work fine. This involved changing the sequences preview to use the DV 24p Advanced codec instead of the default Intel IYUV Codec.
However, the program seems to default back to the IYUV codec when I close the program down. Each time I have to go back into Version 5 and manually change the codecs back to DV 24p Advanced.
However, what confuses me is that in earlier versions of my project that do open in 5.5, I notice that they are still using the IYUV codec. WHich I thought was the offending item in loading up in 5.5.
I would continue to just edit in version 5, but we have some Red Epic footage that we need to add in and then will be shooting some further footage on the Epic.
Needless to say I'm a bit confused. So if anyone has some ideas or instruction that could help me get this sorted so I can edit my project in 5.5 I would be so grateful.
regards
Darran

Hi Jim.
I had created a custom preset using the Desktop, and then for the codec I had changed it to Microsoft AVI and then for the codec DV 24P Advanced.
However I may have solved my own problem with regards to it reverting back to the Intel codec. I changed the amount of Auto Saves, (which was only set at 5, to 10) So I'm figuring it was not letting me save the sequence presets when it did an austo save. Seems to work fine now. I also noticed that in 5.5 there is no Intel IYUV codec, which would explain why it cannot open the sequences. So I'm hoping it's all good now. thanks.

Problems with codec ALC 882 on i945 platinum

The essence such, was a parent payment with codec ALC 880, problems were not. Has bought parent payment MSI 945 platinum on it there is codec ALC 882, that is practically one and too. But there is a heap of problems.
1. Adjustments of sound outputs, namely a linear input
2 are dumped. At a choice from the menu " type of columns " I choose 5.1 and I see instead of two back two lateral columns that is as though has chosen system 7.1 are displayed. Accordingly back columns are silent.
3. If to choose system 7.1 that columns everyone play, but back play as lateral and there is a strong metal sound, only in back.
4. The tick of a conclusion of low frequencies on the buffer is dumped.
Help than can!!!
P.S Windows fresh, the driver put different versions, bios has filled in fresh, has not helped.

Are you using a translator for your English? It's much difficult to understand vs your native language. I was about to ask what do you mean by "parent payment" ? ... Please use your native language here. I probably won't understand but perhaps other forum members here can help you.
Please read the MOAN guide for forum posting guideline, https://forum-en.msi.com/index.php?topic=38822.0

Problem with Codec - QT7 does not recognize it

I'm trying to play a video with the basic version of QT 7.0.4 (didn't go to PRO yet) and the movie does not play.
I installed the codec's and still doesn't work.
The movie info was:
DX50, 528 x 304, Millions
MPEG Layer 3, Stereo, 48.000 kHz
And I had in the folder HD/Library/Quicktime:
DivX 6 Decoder.component
DivX 6 Encoder.component
AppleIntermediateCodec.component
In another try the movie info was:
XVID, 544 x 304, Millions
MPEG Layer 3, Stereo, 44.100 kHz
And I had in the folder HD/Library/Quicktime:
XviD_Codec v0.5.1.component
AppleIntermediateCodec.component
I tried all combinations of codec's (including 3ivx) and did not work.
Does the basic version accept 3rd Party codecs?
Any ideas?
Thanks,
J.Ricardo

Hello JC,
The reason the movie will not play is because that's how Apple grabs you by the yang and twists. QT will not play AVI files until you purchase QT Pro, but it gets better. When you do purchase it, it will only work for the life of the lastest version of QT. As soon as a newer version comes out say QT 8, the QT Pro you now have for QT 7 will no longer work. That's why I'll never get QT Pro.
JerBear :-})

Problem with codec or sequenz

what does that mean?
I try to open a Project and this is the "answer" of premiere pro CS6:
What do i have to do?
I didn't change footage, hardware nor software?

Duplicate message deleted
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Problems with titler window losing focus

I'm using PP2.0, running on windows XP x64. It's been running since it was last re-installed in December 2007 (after a problem with codecs that broke PP2), and I've made no changes to it or to any of the support processes it uses, nor any changes to the OS (apart from service packs). There have been NO driver changes, window layout changes, workspace changes, or any other changes (apart from entropy). The mouse I'm using is a [oxymoron]Kensington Expert Mouse Pro[/oxymoron], with their latest (i.e. 2007) drivers, and XMouse ver 1.37.0.0 (i.e. their latest x64 driver), but this happens regardless of the mouse or keyboard I use.
To set the scene... I use a "standard" title template for all my video work, with predefined text fields and colours and so on. There's nothing bizarre or extraordinary about these templates, they're actually super simplistic in terms of what most users here use their titlers for! The entire title is completely static - there are no scrolling or moving anythings, the title is overlaid on black video, there are just a dozen simple text boxes and one standard logo (bmp format), that's it. I use only Arial fonts, with no special settings or kerning or spacing or anything more complex than colour. I haven't touched or modified the original titler template since I set it up in December 2008. The problem I'm seeing happens to any titles, not just the known working template, so it's definitely a PP2 problem, not a titler problem.
The problem is that recently (in the past 3-4 months, over maybe 5 projects in that time) the titler window loses focus while I'm using it, and the PP2 main application becomes active.
When I bring the titler window up (using any method) and start editing, that window loses focus (window frame reverts to the background windowframe colour) and I can't type or do anything else in the titler window.The PP2 app window suddenly become the active window, and remains active until I shut down the titler.
My workaround is to click and hold in the titler window, on or around the text I want to edit. So by pressing and holding the left mouse button, I can insert text just fine in any existing text frame. And by selecting text with the left button and then holding it (like I'm starting a drag operation), I can _replace_ the selected text - but as soon as I release the mouse button, the focus leaves the titler and I can't do anything again.
I've reset the workspace, changed mouse and keyboards, but the problem isn't a hardware or driver issue. PP2 is the only application that behaves like this, and it's the only Adobe application that behaves like this - Photoshop (5.5 and CS8) and Audition (1.5 and 3.0) all work perfectly normally.
This behaviour occurs with titles I've used and saved in previous working projects, it happens with new blank titles, and so on.
What I've noticed most recently while trying to fix the problem, is that sometimes I can actually type a couple of letters or hit an editing key or two in the titler window normally, but then the titler loses focus and keeps it lost permanently after that. That doesn't always happen, and it doesn't appear to be related to process flow. So restarting PP2, or closing and reloading a project, don't affect the arbitrary nature of the "sometimes starts to work" behaviour. I can sometimes re-edit a title in the same project after editing the title with the focus lost, and suddenly the first few keystrokes are normal, but then the focus reverts to the main app.
If anyone has any ideas or suggestions to try (apart from reinstalling the application again or upgrading), I'd be most grateful.
-PCPete

I think you're right, it's starting to look like another problem within the "new" PP2 installation. It's such a complex app, it's not surprising it gets lost.
Since this is the only app that has this problem (and because of the nature of the problem), I know it's not a graphics card or driver issue.
This appears to be a high-level windows function problem, to do with the way the PP2 app is handling the modal form. It's probably not the mouse driver, since I don't move the mouse outside of the child window, but that doesn't leave much else. I don't have popups or any other asynchronous applications (like email warning windows or balloon-type reminders or notifications) either.
I really don't want to go through the horror of yet another reinstall of an Adobe product if I can possibly avoid it, but pending no other useful ideas, that is an absolute last resort.

Audio-Problem with Adobe Premiere Pro CC 2014 by using long Clips in AVC-Intra Codec (4Gb Border)

Hello
We own a Panasonic camera (AJ-PX5000G) and we film in 1080p50 with the AVC-Intra100 Codec. When importing longer clips in Premiere Pro, the video is fully loaded, but the waveform of the sound ends at the Time Code 00:02:28:35.
Sometimes the sound could be played after this Timecode but otherwise there is no audio. Even if we use the same clip several times we see that it works sometimes and sometimes not. It looks random.
We also tried to import the Clips with Adobe Prelude directly from the P2-Card but there are the same problems.
The Clips in 1080p50 AVC-Intra100 have a bitrate of 227Mbps. After 2 Minutes and 28 Seconds 4Gb are written on the P2-Card and the Camera starts a new picture file and 4 sound files..
It looks like Adobe Premiere Pro has problems with the correct relation of the files that all get together to one clip.
Is there anybody who can confirm this problem? Can anybody help me with this Premiere Problem?
Dennis
(Workstation: Dell Precision T3600, Intel Xeon E5-1620 @ 3.60 GHz, 16 GB RAM, Windows 7 Professional 64-bit, Service Pack 1, Premiere Pro CC 2014.1 (Build 8.1.0)   )
Mediainfo of the P2-Cards:
General
Complete name                            : \CONTENTS\VIDEO\0068T7.MXF
Format                                   : MXF
Format profile                           : OP-Atom
Format settings                          : Closed / Complete
File size                                : 3.92 GiB
Duration                                 : 2mn 28s
Overall bit rate                         : 227 Mbps
Encoded date                             : 2014-10-15 13:33:41.000
Writing application                      : Panasonic P2 2.0
Writing library                          : Panasonic P2 2.0
Video
ID                                       : 2
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : High 4:2:[email protected]
Format settings, CABAC                   : No
Format settings, GOP                     : N=1
Format settings, wrapping mode           : Clip
Codec ID                                 : 0D01030102106002-0401020201323104
Duration                                 : 2mn 28s
Bit rate                                 : 227 Mbps
Width                                    : 1 920 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 16:9
Frame rate                               : 50.000 fps
Standard                                 : Component
Color space                              : YUV
Chroma subsampling                       : 4:2:2
Bit depth                                : 10 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 2.193
Stream size                              : 3.92 GiB (100%)
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
Mediainfo Audio-Datei P2-Card:
General
Complete name                            : \CONTENTS\AUDIO\0068T700.MXF
Format                                   : MXF
Format profile                           : OP-Atom
Format settings                          : Closed / Complete
File size                                : 13.6 MiB
Duration                                 : 2mn 28s
Overall bit rate mode                    : Constant
Overall bit rate                         : 770 Kbps
Encoded date                             : 2014-10-15 13:33:41.000
Writing application                      : Panasonic P2 2.0
Writing library                          : Panasonic P2 2.0
Audio
ID                                       : 3
Format                                   : PCM
Format settings, Endianness              : Little
Format settings, wrapping mode           : Clip (AES)
Codec ID                                 : 0D01030102060400
Duration                                 : 2mn 28s
Bit rate mode                            : Constant
Bit rate                                 : 768 Kbps
Channel(s)                               : 1 channel
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Stream size                              : 13.6 MiB (100%)

Hi,
we have the same problem!
It is not possible to play audio with the AVC-Intra100 Codec fluently.
Can anybody help?
Thanks,
Anja

Very urgent!! Problems with the H.263 codec on JMStudio

I downloaded the JMF Version 2.1.1e ' version.
The H.263 codec doesn't work.
I noticed that the file sound.jar wasn't in the lib directory of JMF-2.1.1e.
Is for this reason I have problems with the H.263 codec??
Thanks for your help.

What do you try to broadcast? H263 is a video codec, not audio..

Problem with QT 7.1.5 and Sorensen codec?

Has anyone noticed a compatibility problem with Sorensen video 3 codec and Quicktime 7.1.5? This problem did not seem to exist in prior versions (hence have been asking how to reinstall previous version but seems impossible). Some of the earlier postings discuss software that may be designed with Sorensen codec... these may be the ones not functioning properly now (video no longer works). Does this sounds plausible?
Mac Mac OS X (10.4.8)
Mac Mac OS X (10.4.8)
Mac Mac OS X (10.4.8)

That may be true, Jack, but Edmund said that the movie played in QuickTime Player. So his problem is most likely not a bug in QuickTime, though I can't say for certain.
And as I said above, I have no problem playing Sorenson-encoded content on my Intel-based Mac with QuickTime 7.1.5, so more details about your content and setup (including any third-party codecs you may have installed) so that people can determine what the difference might be between the content that plays and the content that does not, or what's different in the systems, would be helpful, I'm sure.

Codec problem with one gateway

I am having a very strange problem with one of my gateways. No matter how I set up my regions and device pools I continue to have all calls go through this gateway as G729. This would be fine except that I can't do conference calls because of codec mismatches.
The gateway is a PRI running H323. CM 3.2.2(c) Gateway is a 3640 running 12.2.11(t)
All regions are currently set to G711.
I read something about a command under voice-port that sets the default codec. What I don't understand is, if this is what is causing it to go to G729, why is this the only gateway that ignores the regions.
Any help would be appreciated.

Cisco VoIP gateways support the codec negotiation feature. This feature provides the ability for a Cisco VoIP gateway to connect to other VoIP devices without necessarily knowing which codec is used for a call-setup. Also, this feature allows Cisco VoIP gateways to dynamically adjust to changes on remote devices. As long as the codec used by the remote VoIP device matches the capabilities-list of the Cisco VoIP gateway, the VoIP call is completed.
The following example shows how to configure codec negotiation:
Cisco-router# config t
Cisco-router(config)# voice class codec 1
!--- This sets up class 1 to be assigned to the dial peer.
Cisco-router(config-class)#codec preference 1 g723r63
Cisco-router(config-class)#codec preference 2 g729ar8
Cisco-router(config-class)#codec preference 3 g711ulaw
Cisco-router(config-class)#codec preference 4 g726r32 bytes 240
!--- These commands define the preferred codec list using 1,2,3, and 4 to set the preference.
Cisco-router(config)#dial-peer voice 1 voip
Cisco-router(config-dial-peer)#voice-class codec 1
!--- This assigns voice-class codec 1 to the dial-peer
Cisco-router(config-dial-peer)#destination-pattern 4723155
Cisco-router(config-dial-peer)#session target ipv4:192.168.100.1

Final Cut Pro 6.0.3 Problem with Photo JPG Codec ?

Hi everyone...
I have been working with music videos for several years using FCP 5.x and photo-jpeg codec, everything works fine. As time going by now I have updated my FCP using 6.0.3 with hopes to get better features. But unfortunately FCP 6 has problem with photo-jpeg codec. The problem is when I load a photo-jpeg video, the gamma will changes every time the playback head is start or stop. And I can't using video transition (standard cross-dissolve) anymore because the video gamma also change at the in transition and out transition. It also appear in my video monitor and output file ! I have searching all day to find out what is exactly the problem, but never get the solution. Should i come back to FCP 5.x ? Is it a BUGS or what ? What happen with Apple, why they let this happened ?
For information the video is in SD PAL & captured using Blackmagic Decklink card.
Please help,...Thanks.

Welcome to the discussions...
I believe this has to do with using YUV or RGB as the rendering method. RT is always RGB, but try changing the setting for your timeline to whatever it is not now...
post back,
Patrick

Sigmatel 9205 - Problems with audio codec in Windows XP

Does anyone have a working solution to using IDT Sigmatel STAC 9205 Audio Codec in Windows XP. I have Dell Lat. D531, D630, D830 and XPS M1330 (the D531 and XPS came with VISTA pre-installed - we don't support, so I formatted and installed Windows XP). The problem is that I cannot, for the life of me, get the Sigmatel driver to install. Even on the machines that came with Windows XP (we routinely format the Dell OEM OS and replace with our volume license XP OS) the driver won't install. I even repaired the OS installation with the OEM (Dell) version and still the driver will. not. install..... This is a very recent problem and I have at least 15 laptops that I can't get the integrated sound card to work (when I go to install the driver the message is basically the component you are trying to install is not present on this system). I have been 'working' with Dell Tech Support (Gold and otherwise) to no avail. One tech sent a replacement hard drive imaged with a working driver -- however, she sent a VISTA imaged hard drive...I explained that we don't support VISTA prior to her sending the drive. One tech is having the motherboard replaced (today). I'll see how that goes. This driver is the kiss of death unless dell with supply a pc card as a replacement, I have tried everything I know to do and Dell Tech support knows to do. ANY HELP WOULD BE GREATLY APPRECIATED

Tony, some posters have reported that the XP drivers for the Vostro 1500 will work for the M1330.
Vostro 1500 XP downloads
However before installing any Sigmatel driver after an OS installation you should follow this order of driver installation:
a. Install Dell Notebook System Software R154270 (click the + sign next to System Utilities). Restart.
b. Next install the Intel Mobile Chipset driver 153997 (click the + sign next to Chipset). Restart.
c. Finally re-install the Sigmatel audio driver R158235 (click the + sign next to Audio).
Some v1500 users have reported that they had to "uninstall an unknown PCI device in Device manager first , then install the driver normally".
Rarely there will still be a problem with the installation at this point (in XP). In those cases follow this tip from forum member rpilT2005: check in the Device Manager for a "PCI Device" with a yellow question mark next to it, under the "System Devices" grouping. Hit 'update driver' on that one, and it should find the driver.
A previous poster was able to get his audio working by following the above instructions more or less He said that after installing the Chipset driver he next uninstalled the unknown PCI device. He let Windows look for a new driver but he said he had to point it to the folder with the driver. Then he wrote, "Xp still said that an error occurred and the device may not work properly, but it did work fine and I also don't have a yellow question mark..." I know this is confusing.
Jim

Problems with ADI Sound Codec etc.

Hi,
I have 875P Neo FIS2R board with ADI codec and when I used LINE IN to connect my PCI TV card, sound is too noisy and distorted !!!!
I try all...
-PCI latency time: increased more and more ...
-LINE IN rider moved in mixer to lowest value
Sound is still too distorted !!!
875P-FIS2R board
P4/2,44/533
512MB/333/Samsung
MSI FX5700/256 VGA
60GB/133 MAXTOR
HP Writer
Plextor Writer

There seems to be a problem with the Latest Sound-Max Drivers, I remember seeing Numerous Threads on this. I would try Finding a different Driver than the One that you currently Have installed? http://www.soundmax.com

Problems With MPEG-2 Codec

I've been having problems with Apple's MPEG-2 codec for Quicktime.
All my 640x480 movies are labeled as 720x480, and when I convert them to .mp4 with VisualHub (third party software) it stretches them to 720x480. It didn't do this before I got the codec.
Is there any way to fix this?
Alternatively, how do I uninstall the codec?
Thanks.

I am using the Sony HVR-Z1U camera. I have firewire connection on the camera that I have connected a Sony HVR-MRC1K memory recording unit to. The tape in camera starts the recording then the digital recording kicks on. I have to always have a tape in camera to start recording onto firewire connect digital hard drive recorder. As I mentioned in my previous post, the HVR-MRC1K records to a 32 gb compact flash high speed card and saves files as M2T files (MPEG2) I covert/transcode the files using Clip Wrap software to Quicktime .MOV files. I am them able to import them into FCP X and or iMovie. Once in FCP X the files play, but will skip or drop frames. Again there is no issue on my other mac using FCP 7. I don't even have to transcode files in Clip Wrap. They import automatically using a connected USB drive and Compact Flash Card. I really would like to use FCP X and move forward and not have to take a step backward using only FCP 7. I am in Fort Myers Florida. There is an Apple store nearby in Estero, Florida and one a little further in Naples Florida. I have only gone to the Estero Florida store. The Naples store had FCP classes only twice a week and the Estero store had none.

Problem with codec!

Similar Messages

Maybe you are looking for