Problem With Collection Sets

Wow, I am really regretting upgrading from v1. What used to be simple catalogueing tasks are now so frustrating, long winded and unreliable my temper is being tested daily.
I regularly photograph either similar events or the same annual events and like to organise my photos into collections, sub collections etc. For a new event once I have got the structure of collections set up in my mine catalogue I was then able to export this as a new catalogue to use as a template for future events. I started doing this as a result of great advise on this forum, as a work around for not being able to copy collection structures within a catalogue. The result was I didnt need to keep setting up a structure of many collections for each event, I could use the template catalogue and import this into the main one when the photos were organised.
So then I moved to Lightroom 3
First I found that with the introduction of collection sets I could no longer have nested collections and had to use nested collection sets with only the final level as a collection. A pain in the neck and one which meant my exisiting catalogue needed weeks of work to correct, in addition to an alteration to my workflow which still isnt ideal.
Because of this I have now been trying to exprot my revised structure of collections and collection sets as new templates for the reasosn mentioned above. But I can't becuase lightroom does not allow exporting collection sets, only collections i.e. one level, meaning this great workaround is no longer available.
So I thought what I would do is copy my catalogue, delete everything in it but the collection set structure I wanted for each event, and then use this as a template. Very time consuming but hopefully it would solve the problem. But it didn't as when I import the catalogue there seems to be a limit as to the number of collection set levels that get imported, meaning the lowest levels and hence the collections dont import, i.e. all the organisation is pointless as the photos import but not the collections.
So I thought OK I would move one of the collection sets from its parent to the top level and get around it this way, meaning I just have to do a little reorganisation after importing it. Not ideal, but hopefully it would solve the problem. Guess what, it doesnt. I move the collection set (and with it all its child sets and collections) to the top, and when I delete the collection set which used to be the parent, all the child sets and collections disappear from the new top level set.
Thsi is so frustrating. In 20 years of using software I have never before experienced a product that removes / fundamentally changes the way in which it works so drastically as this.
If anyone has any ideas how I can get around this I'd really appreciate it

Hello,
Please refer to the following article.
http://blogs.msdn.com/b/sqlagent/archive/2011/07/22/remove-associated-data-collector-jobs.aspx
You can run the dcclenaup.sql script mentioned in the article.
Another option is using sp_syscollector_cleanup_collector.
http://blogs.msdn.com/b/sqlagent/archive/2012/04/05/remove-associated-data-collector-jobs-in-sql-2012.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Similar Messages

Problem with subform set

Hi all ,
I am facing a problem with subform set. When i use two subform sets with same set of conditions in a form, only the first subform set works while the second one does nothing. Did any of you faced the same problem ? If so Please let me know the solution you came up with. Thanks.
SrPrabhu

Hi scott,
The problem is with subform set and not subform. In subform set, we can give conditions to make only one subform visible at a time that satisfies the condition. First create a subform set having more than one subform. Now apply the conditions to that subform set. Check if it works. I m sure it wil work. Now just make a duplicate copy of the same subform set. Place it in the same form so that now two subform sets are available. Now preview the form. U wil fine only one subform set working and the other one doesnt.
We can use any number of subform set within a form. If different conditions are applied to each subform set , it works fine.
i wonder now wat wud u do in case if we are in need of two subformset having the same condition in a form ?
Thanks,
Sr Prabhu

Weird Problem with FSB setting

Hi all,
I've just come across a weird problem with FSB setting.
If I set FSB to 229 my machine runs @ 1.6Ghz only.
When I set to 230 it runs @ 3.2Ghz (as it should).
Any ideas what could be causing this?
Thanks
Mick

If FSB @ =
Strange thing.. What a magical 1MHz

Refresh problem with collection

Hello, apologize my English, I have got problem with refresh collections. Follow:
1) I have got two classes which have got dependency together.
2) First class has got collection of objects from second class.
3) I call query "findXXX" which fill collection first class.
4) I create new object second class and again call query "findXXX" to get actual collection. But collection contain old values a I have to close and open web browser to get actual data.
I think It is problem with TopLink cache, but I do not know how solve this.
Can you help me, please?

The cached data is probably stale.
There are many ways to solve this. (see the caching section of the docs)
- there is a refresh option on the query
- you can set a descriptor to be isolated (Cache.shared=false)
- you can set a descriptor to always refresh
- there is a cache invalidation option on descriptor
- there is a cache synchronization option on session
If the cache is stale, but the database was not accessed outside the application, it may be that your application is not maintaining relationships correctly. You must ensure you set both sides of a bi-directional relationship.
-- James : http://www.eclipselink.org

Apex 4 , problem with collection executions

Hi ,
I am having the following problem with the execution of one collection :
Reference thread : Re: APEX 4 , executing a remote procedure and populating data using collection
DBNAME ---> list item which I build from the DB links which I built ( as dynamic query in the shared components from a local table which holds entries of dblink names )
USERLIST --> list item of users which should display dynamicaly the users of that db link I choose in DBNAME ( based on a collection )
buttons CANCEL and SUBMIT
4- Initial COLLECTION page process which is calculated before Header :
DECLARE
q varchar2(4000);
BEGIN
IF APEX_COLLECTION.COLLECTION_EXISTS(P_COLLECTION_NAME => 'QRY1') THEN
APEX_COLLECTION.DELETE_COLLECTION(P_COLLECTION_NAME => 'QRY1');
END IF;
q := 'SELECT username , username FROM sys.dba_users@'||:P23_DBNAME ;
APEX_COLLECTION.CREATE_COLLECTION_FROM_QUERY_B(
P_COLLECTION_NAME => 'QRY1',
P_QUERY => Q);
END;
For USERLIST list item I am using the following in LIST OF VALUES DEFINITION :
SELECT C001, C002 FROM APEX_COLLECTIONS WHERE COLLECTION_NAME='QRY1'
5 - to submit the values from the screen to the remote database procedure I am using the following submit process ON SUBMIT AFTER CALCULATIONS:
DECLARE
v_statement varchar2(255);
BEGIN
v_statement := 'begin
Lock_User@&P24_DBNAME.(''&P24_USERLIST.'');
insert into log values (1,''user locked'') ;
commit ;
end;';
EXECUTE IMMEDIATE v_statement;
END;
The problem :
The form runs sucessfully , where I the USERLIST changes dynamicaly when I change the DBNAME values , but as soon as I logout and login with another user1 , the collection does not execute and i get "ORA-01729: database link name expected".
I login with user1 in edit mode and recreate the collection , run again , the collection executes successfuly .
If I create a new user2 ( using the sample application pages ) and login with the new user2 , i have the same problem , thus I ho login with user2 in edit mode and try to run the collection .
How can I control the collection to execute regardless of the application user logged in ??
thanks in advance
yousef

Hi ,
I am having the following problem with the execution of one collection :
Reference thread : Re: APEX 4 , executing a remote procedure and populating data using collection
DBNAME ---> list item which I build from the DB links which I built ( as dynamic query in the shared components from a local table which holds entries of dblink names )
USERLIST --> list item of users which should display dynamicaly the users of that db link I choose in DBNAME ( based on a collection )
buttons CANCEL and SUBMIT
4- Initial COLLECTION page process which is calculated before Header :
DECLARE
q varchar2(4000);
BEGIN
IF APEX_COLLECTION.COLLECTION_EXISTS(P_COLLECTION_NAME => 'QRY1') THEN
APEX_COLLECTION.DELETE_COLLECTION(P_COLLECTION_NAME => 'QRY1');
END IF;
q := 'SELECT username , username FROM sys.dba_users@'||:P23_DBNAME ;
APEX_COLLECTION.CREATE_COLLECTION_FROM_QUERY_B(
P_COLLECTION_NAME => 'QRY1',
P_QUERY => Q);
END;
For USERLIST list item I am using the following in LIST OF VALUES DEFINITION :
SELECT C001, C002 FROM APEX_COLLECTIONS WHERE COLLECTION_NAME='QRY1'
5 - to submit the values from the screen to the remote database procedure I am using the following submit process ON SUBMIT AFTER CALCULATIONS:
DECLARE
v_statement varchar2(255);
BEGIN
v_statement := 'begin
Lock_User@&P24_DBNAME.(''&P24_USERLIST.'');
insert into log values (1,''user locked'') ;
commit ;
end;';
EXECUTE IMMEDIATE v_statement;
END;
The problem :
The form runs sucessfully , where I the USERLIST changes dynamicaly when I change the DBNAME values , but as soon as I logout and login with another user1 , the collection does not execute and i get "ORA-01729: database link name expected".
I login with user1 in edit mode and recreate the collection , run again , the collection executes successfuly .
If I create a new user2 ( using the sample application pages ) and login with the new user2 , i have the same problem , thus I ho login with user2 in edit mode and try to run the collection .
How can I control the collection to execute regardless of the application user logged in ??
thanks in advance
yousef

Problem with layer sets opening

Hi,
I have a problem open layer sets. In my script I get layers index and then iterate throught this layers.
Here is the script:
function getAllLayersByIndex(){
       function getNumberLayers(){
       var ref = new ActionReference();
       ref.putProperty( charIDToTypeID("Prpr") , charIDToTypeID("NmbL") )
       ref.putEnumerated( charIDToTypeID("Dcmn"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
       return executeActionGet(ref).getInteger(charIDToTypeID("NmbL"));
       function hasBackground() {
           var ref = new ActionReference();
           ref.putProperty( charIDToTypeID("Prpr"), charIDToTypeID( "Bckg" ));
           ref.putEnumerated(charIDToTypeID( "Lyr " ),charIDToTypeID( "Ordn" ),charIDToTypeID( "Back" ))//bottom Layer/background
           var desc = executeActionGet(ref);
           var res = desc.getBoolean(charIDToTypeID( "Bckg" ));
           return res
       function getLayerType(idx,prop) {
           var ref = new ActionReference();
           ref.putIndex(charIDToTypeID( "Lyr " ), idx);
           var desc = executeActionGet(ref);
           var type = desc.getEnumerationValue(prop);
           var res = typeIDToStringID(type);
           return res
       function getLayerVisibilityByIndex( idx ) {
           var ref = new ActionReference();
           ref.putProperty( charIDToTypeID("Prpr") , charIDToTypeID( "Vsbl" ));
           ref.putIndex( charIDToTypeID( "Lyr " ), idx );
           return executeActionGet(ref).getBoolean(charIDToTypeID( "Vsbl" ));;
       var cnt = getNumberLayers()+1;
       var res = new Array();
       if(hasBackground()){
    var i = 0;
          }else{
    var i = 1;
       var prop = stringIDToTypeID("layerSection");
       for(i;i<cnt;i++){
          var temp = getLayerType(i,prop);
          if(temp != "layerSectionEnds") res.push(i);
       return res;
       function getLayerVisibilityByIndex( idx ) {
           var ref = new ActionReference();
           ref.putProperty( charIDToTypeID("Prpr") , charIDToTypeID( "Vsbl" ));
           ref.putIndex( charIDToTypeID( "Lyr " ), idx );
           return executeActionGet(ref).getBoolean(charIDToTypeID( "Vsbl" ));
function makeActiveByIndex( idx, visible ){
    var desc = new ActionDescriptor();
      var ref = new ActionReference();
      ref.putIndex(charIDToTypeID( "Lyr " ), idx)
      desc.putReference( charIDToTypeID( "null" ), ref );
      desc.putBoolean( charIDToTypeID( "MkVs" ), visible );
   executeAction( charIDToTypeID( "slct" ), desc, DialogModes.NO );
var groups = getAllLayersByIndex();
    for(var i = groups.length-1; i >= 0 ; i--) {
      makeActiveByIndex( groups[i], true );
      ....working with layers....
I think, my problem is in function makeActiveByIndex, because it doesn't make active a folder and doesn't open it.
You can see it on this picture. Active layer set is "Skupina 1" and it is in layer set "hlavicka". But "hlavicka" is not open. WHY??
Can you help me fix this problem??
Thank you Domaneni

Hi, for the past days I've worked on a script to toogle opening and closing layeSets, I've taken the code that TeddyBear posted here: http://ps-scripts.com/bb/viewtopic.php?p=14773 and adjusted it a little bit, and that's what I came up with, I hope it will help you:
<javascriptresource>
<name>BCM> ToogleOpen_CloseGroup...</name>
<category>BCM</category>
</javascriptresource>
//For code readability
// http://ps-scripts.com/bb/viewtopic.php?f=9&t=3235
function getActiveLayerIndex() {
    var ref = new ActionReference();
    ref.putProperty( charIDToTypeID("Prpr") , charIDToTypeID( "ItmI" ));
    ref.putEnumerated( charIDToTypeID("Lyr "), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
    return executeActionGet(ref).getInteger(charIDToTypeID( "ItmI" ));
function cTID(s){return charIDToTypeID(s)}
function sTID(s){return stringIDToTypeID(s)}
// =============================
// The main function
function closeGroup(layerSet) {
   var m_Name = layerSet.name;
   var m_Opacity = layerSet.opacity;
   var m_BlendMode = layerSet.blendMode;
   var m_LinkedLayers = layerSet.linkedLayers;
var currINDEX = getActiveLayerIndex();
   var m_bHasMask = hasLayerMask();
   if(m_bHasMask) loadSelectionOfMask();
   if(layerSet.layers.length <= 1) {
      addTempLayerSetIn(currSetIDX-1);
      makeActiveByIndex(currSetIDX+2, false);
      ungroup();
      groupSelected(m_Name);
      deleteTempLayerSetbyIdx(currSetIDX+1);
   } else {
       makeActiveByIndex(currSetIDX, false);
      ungroup();
      groupSelected(m_Name);
   var m_Closed = activeDocument.activeLayer;
   m_Closed.opacity = m_Opacity;
   m_Closed.blendMode = m_BlendMode;
   for(x in m_LinkedLayers) {
      if(m_LinkedLayers[x].typename == "LayerSet")
         activeDocument.activeLayer.link(m_LinkedLayers[x]);
   if(m_bHasMask) maskFromSelection();
   return m_Closed;
// =============================
// Below are all necessary subroutines for the main function to work
function ungroup() {
   var m_Dsc01 = new ActionDescriptor();
   var m_Ref01 = new ActionReference();
   m_Ref01.putEnumerated( cTID( "Lyr " ), cTID( "Ordn" ), cTID( "Trgt" ) );
   m_Dsc01.putReference( cTID( "null" ), m_Ref01 );
   try {
      executeAction( sTID( "ungroupLayersEvent" ), m_Dsc01, DialogModes.NO );
   } catch(e) {}
function addLayer() {
   var m_ActiveLayer          =    activeDocument.activeLayer;
   var m_NewLayer             =    activeDocument.layerSets.add();
   m_NewLayer.move(m_ActiveLayer, ElementPlacement.PLACEBEFORE);
   return m_NewLayer;
function hasLayerMask() {
   var m_Ref01 = new ActionReference();
   m_Ref01.putEnumerated( sTID( "layer" ), cTID( "Ordn" ), cTID( "Trgt" ));
   var m_Dsc01= executeActionGet( m_Ref01 );
   return m_Dsc01.hasKey(cTID('Usrs'));
function activateLayerMask() {
   var m_Dsc01 = new ActionDescriptor();
   var m_Ref01 = new ActionReference();
   m_Ref01.putEnumerated( cTID( "Chnl" ), cTID( "Chnl" ), cTID( "Msk " ) );
   m_Dsc01.putReference( cTID( "null" ), m_Ref01 );
   try {
      executeAction( cTID( "slct" ), m_Dsc01, DialogModes.NO );
   } catch(e) {
      var m_TmpAlpha = new TemporaryAlpha();
      maskFromSelection();
      activateLayerMask();
      m_TmpAlpha.consume();
function deleteMask(makeSelection) {
   if(makeSelection) {
      loadSelectionOfMask();
   var m_Dsc01 = new ActionDescriptor();
   var m_Ref01 = new ActionReference();
   m_Ref01.putEnumerated( cTID( "Chnl" ), cTID( "Ordn" ), cTID( "Trgt" ) );
   m_Dsc01.putReference( cTID( "null" ), m_Ref01 );
   try {
      executeAction( cTID( "Dlt " ), m_Dsc01, DialogModes.NO );
   } catch(e) {}
function selectLayerMask() {
   var m_Dsc01 = new ActionDescriptor();
   var m_Ref01 = new ActionReference();
   m_Ref01.putEnumerated(cTID("Chnl"), cTID("Chnl"), cTID("Msk "));
   m_Dsc01.putReference(cTID("null"), m_Ref01);
   m_Dsc01.putBoolean(cTID("MkVs"), false );
   try {
      executeAction(cTID("slct"), m_Dsc01, DialogModes.NO );
   } catch(e) {}
function loadSelectionOfMask() {
   selectLayerMask();
   var m_Dsc01 = new ActionDescriptor();
   var m_Ref01 = new ActionReference();
   m_Ref01.putProperty( cTID( "Chnl" ), cTID( "fsel" ) );
   m_Dsc01.putReference( cTID( "null" ), m_Ref01 );
   var m_Ref02 = new ActionReference();
   m_Ref02.putEnumerated( cTID( "Chnl" ), cTID( "Ordn" ), cTID( "Trgt" ) );
   m_Dsc01.putReference( cTID( "T   " ), m_Ref02 );
   try {
      executeAction( cTID( "setd" ), m_Dsc01, DialogModes.NO );
   } catch(e) {}
function maskFromSelection() {
   if(!hasLayerMask()) {
      var m_Dsc01 = new ActionDescriptor();
      m_Dsc01.putClass( cTID( "Nw " ), cTID( "Chnl" ) );
      var m_Ref01 = new ActionReference();
      m_Ref01.putEnumerated( cTID( "Chnl" ), cTID( "Chnl" ), cTID( "Msk " ) );
      m_Dsc01.putReference( cTID( "At " ), m_Ref01 );
      m_Dsc01.putEnumerated( cTID( "Usng" ), cTID( "UsrM" ), cTID( "RvlS" ) );
      try {
         executeAction( cTID( "Mk " ), m_Dsc01, DialogModes.NO );
      } catch(e) {
         activeDocument.selection.selectAll();
         maskFromSelection();
   } else {
      if(confirm("Delete existing mask?", true, "Warning")) {
         activateLayerMask();
         deleteMask();
function groupSelected(name) {
   var m_Dsc01 = new ActionDescriptor();
   var m_Ref01 = new ActionReference();
   m_Ref01.putClass( sTID( "layerSection" ) );
   m_Dsc01.putReference( cTID( "null" ), m_Ref01 );
   var m_Ref02 = new ActionReference();
   m_Ref02.putEnumerated( cTID( "Lyr " ), cTID( "Ordn" ), cTID( "Trgt" ) );
   m_Dsc01.putReference( cTID( "From" ), m_Ref02 );
   var m_Dsc02 = new ActionDescriptor();
   m_Dsc02.putString( cTID( "Nm " ), name);
   m_Dsc01.putObject( cTID( "Usng" ), sTID( "layerSection" ), m_Dsc02 );
   executeAction( cTID( "Mk " ), m_Dsc01, DialogModes.NO );
   return activeDocument.activeLayer;
function addToSelection(layerName) {
   var m_Dsc01 = new ActionDescriptor();
   var m_Ref01 = new ActionReference();
   m_Ref01.putName( cTID( "Lyr " ), layerName );
   m_Dsc01.putReference( cTID( "null" ), m_Ref01 );
   m_Dsc01.putEnumerated( sTID( "selectionModifier" ), sTID( "selectionModifierType" ), sTID( "addToSelection" ) );
   m_Dsc01.putBoolean( cTID( "MkVs" ), false );
   try {
      executeAction( cTID( "slct" ), m_Dsc01, DialogModes.NO );
   } catch(e) {}
function TemporaryAlpha() {
   activeDocument.selection.store((this.alpha = activeDocument.channels.add()));
   activeDocument.selection.deselect();
   this.consume = function() {
      activeDocument.selection.load(this.alpha);
      this.alpha.remove();
function makeActiveByIndex( idx, visible ){
     if( idx.constructor != Array ) idx = [ idx ];
     for( var i = 0; i < idx.length; i++ ){
          var desc = new ActionDescriptor();
          var ref = new ActionReference();
          ref.putIndex(charIDToTypeID( 'Lyr ' ), idx[i])
          desc.putReference( charIDToTypeID( 'null' ), ref );
          if( i > 0 ) {
               var idselectionModifier = stringIDToTypeID( 'selectionModifier' );
               var idselectionModifierType = stringIDToTypeID( 'selectionModifierType' );
               var idaddToSelection = stringIDToTypeID( 'addToSelection' );
               desc.putEnumerated( idselectionModifier, idselectionModifierType, idaddToSelection );
          desc.putBoolean( charIDToTypeID( 'MkVs' ), visible );
          executeAction( charIDToTypeID( 'slct' ), desc, DialogModes.NO );
function deleteActiveLayer(){
   // =======================================================
   var idDlt = charIDToTypeID( "Dlt " );
       var desc752 = new ActionDescriptor();
       var idnull = charIDToTypeID( "null" );
           var ref529 = new ActionReference();
           var idLyr = charIDToTypeID( "Lyr " );
           var idOrdn = charIDToTypeID( "Ordn" );
           var idTrgt = charIDToTypeID( "Trgt" );
           ref529.putEnumerated( idLyr, idOrdn, idTrgt );
       desc752.putReference( idnull, ref529 );
   executeAction( idDlt, desc752, DialogModes.NO );
function isLayerSet( idx ) {
     var propName = stringIDToTypeID( 'layerSection' );
     var ref = new ActionReference();
     ref.putProperty( charIDToTypeID( "Prpr" ) , propName);
     ref.putIndex( charIDToTypeID ( "Lyr " ), idx );
     var desc = executeActionGet( ref );
     var type = desc.getEnumerationValue( propName );
     var res = typeIDToStringID( type );
     // alert(res);
     return res == 'layerSectionStart' ? true:false;
function openGroup1(theGroup) {
   currSetIDX= getActiveLayerIndex();
   if(isLayerSet( currSetIDX ))
    getNamesPlusIDsOfLayerSet();
makeActiveByIndex(currSetIDX, false);
function getNamesPlusIDsOfLayerSet(){
   var ref = new ActionReference();
   ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
   var count = executeActionGet(ref).getInteger(charIDToTypeID('Cnt '));
var parId = executeActionGet(ref).getInteger(stringIDToTypeID( 'layerID' ));
   var Names=[];
   var x = 0;
   var y = 0;
   var r = 0;
   currINDEX = getActiveLayerIndex();
    var i = currINDEX;
   for(i; i > 0 ; i--){
        ref = new ActionReference();
        ref.putIndex( charIDToTypeID( 'Lyr ' ), i );
        var desc = executeActionGet(ref);
        var layerName = desc.getString(charIDToTypeID( 'Nm ' ));
        var Id = desc.getInteger(stringIDToTypeID( 'layerID' ));
        var ls = desc.getEnumerationValue(stringIDToTypeID("layerSection"));
        ls = typeIDToStringID(ls);
        // alert(layerName+": _ :"+ls);
        if(ls == "layerSectionStart"){x++};
        if(layerName.match(/^<\/Layer group/) )
          y ++;
          r = x - y;
          if(r == 0 && ls == "layerSectionEnd"){break};
          continue
        if(ls == "layerSectionContent"){makeActiveByIndex(i,false);break};
        var layerType = typeIDToStringID(desc.getEnumerationValue( stringIDToTypeID( 'layerSection' )));
        var isLayerSet =( layerType == 'layerSectionContent') ? false:true;
Names.push([[Id],[layerName],[isLayerSet]]);
return Names;
function getLayersNb()//function to find out if the number of layers in the document
    var ref = new ActionReference();
    ref.putProperty( charIDToTypeID( 'Prpr' ), stringIDToTypeID('numberOfLayers') );
    ref.putEnumerated( charIDToTypeID( "Dcmn" ), charIDToTypeID( "Ordn" ), charIDToTypeID( "Trgt" ) );
    var desc = executeActionGet(ref);
    var numberOfLayers = desc.getInteger(stringIDToTypeID('numberOfLayers'));
    return numberOfLayers;
function toogleOpenCloseSet(){
myALayerIDX = getActiveLayerIndex();
myGroupP = app.activeDocument.activeLayer;
if(!isLayerSet(myALayerIDX)){
      myGroupP = app.activeDocument.activeLayer.parent;
      if(myGroupP.typename != "Document"){
        if(isSetOpened1(myGroupP)){closeGroup(myGroupP)}else{openGroup1(myGroupP)};
}else{
    if(isSetOpened1(myGroupP)){closeGroup(myGroupP)}else{openGroup1(myGroupP)};
function getFristLayerSetChildVisible(){
xx = false;
   var ref = new ActionReference();
   ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
   var count = executeActionGet(ref).getInteger(charIDToTypeID('Cnt '));
var parId = executeActionGet(ref).getInteger(stringIDToTypeID( 'layerID' ));
   var Names=[];
    var x = 0;
    var y = 0;
    var r = 0;
   currINDEX = getActiveLayerIndex();
    var i = currINDEX;
   for(i; i > 0 ; i--){
        ref = new ActionReference();
        ref.putIndex( charIDToTypeID( 'Lyr ' ), i );
        var desc = executeActionGet(ref);
        var layerName = desc.getString(charIDToTypeID( 'Nm ' ));
        var Id = desc.getInteger(stringIDToTypeID( 'layerID' ));
        var ls = desc.getEnumerationValue(stringIDToTypeID("layerSection"));
        ls = typeIDToStringID(ls);
        var vis = desc.getInteger(stringIDToTypeID( 'visible' ));
        // alert(layerName+": _ :"+vis);
/*        if(desc.hasKey(stringIDToTypeID("visible")))
          alert(desc.getType(stringIDToTypeID("visible")));
        if(ls == "layerSectionStart"){x++};
        if(vis == 1 && Id!=parId && r!=0){
          var theOBj = {id:Id, lname:layerName, idx:i};
          xx =true;
          Names.push(theOBj);
          break;
        if(layerName.match(/^<\/Layer group/) )
          y ++;
          r = x - y;
          if(r == 0 && ls == "layerSectionEnd"){break};
          continue
    return Names;
function getLastChildIdx(){
xx = false;
   var ref = new ActionReference();
   ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
   var count = executeActionGet(ref).getInteger(charIDToTypeID('Cnt '));
var parId = executeActionGet(ref).getInteger(stringIDToTypeID( 'layerID' ));
   currINDEX = getActiveLayerIndex();
    var i = currINDEX;
    var x = 0;
    var y = 0;
    var r = 0;
    var lastChIdx = 0;
   for(i; i > 0 ; i--){
        ref = new ActionReference();
        ref.putIndex( charIDToTypeID( 'Lyr ' ), i );
        var desc = executeActionGet(ref);
        var layerName = desc.getString(charIDToTypeID( 'Nm ' ));
        var Id = desc.getInteger(stringIDToTypeID( 'layerID' ));
        var ls = desc.getEnumerationValue(stringIDToTypeID("layerSection"));
        ls = typeIDToStringID(ls);
        var vis = desc.getInteger(stringIDToTypeID( 'visible' ));
        if(ls == "layerSectionStart"){x++};
        if(layerName.match(/^<\/Layer group/) )
          y ++;
          r = x - y;
          if(r == 0 && ls == "layerSectionEnd")
            lastChIdx = i;
            break;
        // alert(x+" _ "+y+" _ "+r+" _ "+layerName);
    return lastChIdx;
function getNbOfChilds(){
xx = false;
   var ref = new ActionReference();
   ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
   var count = executeActionGet(ref).getInteger(charIDToTypeID('Cnt '));
var parId = executeActionGet(ref).getInteger(stringIDToTypeID( 'layerID' ));
   currINDEX = getActiveLayerIndex();
    var i = currINDEX;
    var nb = 0;
    var x = 0;
    var y = 0;
    var r = 0;
   for(i; i > 0 ; i--){
        ref = new ActionReference();
        ref.putIndex( charIDToTypeID( 'Lyr ' ), i );
        var desc = executeActionGet(ref);
        var layerName = desc.getString(charIDToTypeID( 'Nm ' ));
        var Id = desc.getInteger(stringIDToTypeID( 'layerID' ));
        var ls = desc.getEnumerationValue(stringIDToTypeID("layerSection"));
        ls = typeIDToStringID(ls);
        var vis = desc.getInteger(stringIDToTypeID( 'visible' ));
        if(ls == "layerSectionStart"){x++};
        if(layerName.match(/^<\/Layer group/) )
          y ++;
          r = x - y;
          if(r == 0 && ls == "layerSectionEnd")
            break
          continue
        nb++;
    return nb;
function isSetOpened1( group ){
app.activeDocument.activeLayer = group;
xx = true;
currSetIDX = getActiveLayerIndex();
addTempLayerSetIn(currSetIDX-1);
var fIdx = getActiveLayerIndex();
makeActiveByIndex(currSetIDX+2, false);
if(fIdx == getActiveLayerIndex())
    xx = false;
deleteTempLayerSetbyIdx(currSetIDX+1);
return xx;
function addTempLayerSetIn(idxx){
    // =======================================================
    var idMk = charIDToTypeID( "Mk " );
        var desc58 = new ActionDescriptor();
        var idnull = charIDToTypeID( "null" );
            var ref63 = new ActionReference();
            var idlayerSection = stringIDToTypeID( "layerSection" );
            ref63.putClass( idlayerSection );
        desc58.putReference( idnull, ref63 );
    executeAction( idMk, desc58, DialogModes.NO );
    // =======================================================rename
    var idsetd = charIDToTypeID( "setd" );
        var desc202 = new ActionDescriptor();
        var idnull = charIDToTypeID( "null" );
            var ref209 = new ActionReference();
            var idLyr = charIDToTypeID( "Lyr " );
            var idOrdn = charIDToTypeID( "Ordn" );
            var idTrgt = charIDToTypeID( "Trgt" );
            ref209.putEnumerated( idLyr, idOrdn, idTrgt );
        desc202.putReference( idnull, ref209 );
        var idT = charIDToTypeID( "T   " );
            var desc203 = new ActionDescriptor();
            var idNm = charIDToTypeID( "Nm " );
            desc203.putString( idNm, "mb-dummy tempTestLayerSetOpen_Closed" );
        var idLyr = charIDToTypeID( "Lyr " );
        desc202.putObject( idT, idLyr, desc203 );
    executeAction( idsetd, desc202, DialogModes.NO );
    // =======================================================move
    var idmove = charIDToTypeID( "move" );
        var desc59 = new ActionDescriptor();
        var idnull = charIDToTypeID( "null" );
            var ref64 = new ActionReference();
            var idLyr = charIDToTypeID( "Lyr " );
            var idOrdn = charIDToTypeID( "Ordn" );
            var idTrgt = charIDToTypeID( "Trgt" );
            ref64.putEnumerated( idLyr, idOrdn, idTrgt );
        desc59.putReference( idnull, ref64 );
        var idT = charIDToTypeID( "T   " );
            var ref65 = new ActionReference();
            var idLyr = charIDToTypeID( "Lyr " );
            ref65.putIndex( idLyr, idxx );
        desc59.putReference( idT, ref65 );
        var idAdjs = charIDToTypeID( "Adjs" );
        desc59.putBoolean( idAdjs, false );
        var idVrsn = charIDToTypeID( "Vrsn" );
        desc59.putInteger( idVrsn, 5 );
    executeAction( idmove, desc59, DialogModes.NO );
function deleteTempLayerSetbyIdx(idxx){
// =======================================================
var idDlt = charIDToTypeID( "Dlt " );
      var desc = new ActionDescriptor();
          var ref = new ActionReference();
          ref.putIndex(charIDToTypeID( 'Lyr ' ), idxx);
          // ref.putIdentifier(charIDToTypeID( 'Lyr ' ), idxx);
          desc.putReference( charIDToTypeID( 'null' ), ref );
executeAction( idDlt, desc, DialogModes.NO );
toogleOpenCloseSet();

Help me please : Serious problems with collection-mapping, list-mapping and map-mappi

Hi everybody;
I have serious problems with list-mapping, collection-mapping and map-mapping.
Acording to specifications and requirements in a system I am working on it is needed to
get a "list" of values or an indivudual value.I am working with ORACLE 9i Database,
ORACLE 9i AS and ORACLE 9i JDEVELOPER.
I tried to map a master-detail relationship in an entity-bean, using list-mapping.
And this was very useful in order to get a "list" of details, ...but, when I wanted
to get a single value I have some problems with persistence, something about "saving a state"
despite I just want to get the value of a single detail.
I decided to change it to map-mapping and the problem related with a single detail
worked successfully, but I can get access to the whole bunch of details.
May anyone of you help me with that?
I am very confused I do not know what to do.
Have any of you a solution for that problem?
Thank you very much.

Have you tried a restore in iTunes?

Problem with fingerprint setting

Hey, i bought an iphone 5s yesterday. I set up the fingerprint yesterday and it worked fine. But after that i faced some problem with the system so i reset the wholephone and edit and deleted my original fingerprint. but after that, my phone cant reenter the fingerprint. it can't read any fingerprint and the name is changed to touch id. what should i do with it?

Hello annteoeena,
Congratulations on your iPhone 5s, and thank you for the details of the issue you are experiencing when using Touch ID. I recommend following the steps below for an issue like the one you described:
Troubleshooting Touch ID
Verify that you are using the latest version of iOS.
Ensure that your fingers and the Home button are clean and dry.*
Note: Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning.
Tap Settings > General > Passcode & Fingerprint > Fingerprints and verify:
Passcode Unlock or iTunes & App Store is enabled.
One or more fingerprints have been enrolled.
If one finger isn't working, tap Edit in Settings > General > Passcode & Fingerprint > Fingerprints > Edit to delete and then reenroll the finger.
If that finger still isn't working, try enrolling a different finger.
If you are unable to enroll any of your fingers, take your iPhone 5s to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for further assistance.
Find the full article here:
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
Thank you for using Apple Support Communities.
Best,
Sheila M.

Problems with version sets

I have PSE 6. When I open a JPG from the Organizer using Full Edit and then try to save, I do not get the option to save the image in a version set (even though I do have the Organizer option checked). However, I noticed that invoking Full Edit also prompts the Organizer to say there is a new file in the watched folders. This "new" file is the very same file in the very same location. If I accept to add the file to the Organizer I get two thumbnails in the Organizer, both pointing to the same file on disk. If I do this then the "Edit In Progress" banner appears on the "new" thumbnail and the editor does allow me to add the image to the version set. I am sure that I did not have to do this before, I would expect Full Edit to just open the image, mark it in the Organizer as being edited, not try to add it back to the catalog and allow me to save the edit in a version set. What might be causing this behaviour?
I also have similar and I think related problems with RAW images too, but I am hoping that resolving the above will resolve the RAW issue too.

I should have said that I did try that but it still prevented me from creating a new version in a version set when saving. It is as if the editor needs to start on a copy of the Organizer's entry to allow version sets, as if the original is somehow "locked". Could that be possible?

Problem with character set - Reports 11.1.1.4

Hi!
I have a problem with Oracle Reports 11g regarding character set configuration. The default character set WE8ISO8859P1 works, so PDF reports have a regular display except for Eastern European (EE) letters which are replaced by "¿" sign.
So, when I set any other character set in reports.sh, which would be a normal step to get EE letters, I'm always getting Greek Alphabet in PDF reports. Why Greek Alphabet?
The character sets I tried to use are: EE8ISO8859P2, UTF8 and AL32UTF8.
I changed uifont.ali and included PDF Subset with all four Arial font variants and, of course, I placed all fonts in fonts folder which is pointed by REPORTS_FONT_DIRECTORY.
In Reports Builder everything works fine, but when I have to deploy the report to the Reports Services, the problem occurs.
Also, when I've tried to execute PDF report using In-Process Reports Server (rep_wls_reports_hostnameasinst1) instead of AS Instance Reports Server (RptSvr_hostnameasinst1, which is a regular server), I'm getting Greek Alphabet in PDF reports even if the default character set is WE8ISO8859P1 in reports.sh. What is wrong with it? Where is Greek Alphabet configured?
The production environment is 64-bit Oracle Linux 5.6 with Weblogic 10.3.4 and Forms&Reports 11.1.1.4. Forms works fine with character set EE8ISO8859P2 defined in default.env file.
Thanks in advance!
Regards,
Dejan

Thank you, Denis!
Doc 300416.1 was very useful but Note 356221.1 - A Practical Methodology on Porting Reports from Windows to Unix with Different Font is actually crucial for configuring Reports on Linux.
Also, there is a bug in 11.1.1.3 and 11.1.1.4, which can be fixed using the patch ( Note 1138405.1 - PDF Reports With Font Subsetting Raises Error "Bad /Bbox" on 64-Bit Linux ).
Kind regards!

Problem with version sets in Elements 12

I have just started using elelments 12. I have been having problems with inconsistency in forming version sets. Some sets forms as expected. However, quite often after editing, when returning to Organizer the edited picture is not in a version set with the original and in fact is not even visible. I can get to the edited version only through the "Open" tab in the Editor. I have check the appropriate "Save in version set" in the save menu. Suggestions?

Seems you have the same problem :
http://forums.adobe.com/thread/1309160?start=0&tstart=0
The source of the problem is not clearly found today. It seems that happens on previously converted catalogs.
A workaround seems to have been found : killing the autoanalyzer.exe process in the task manager.

Problem with Collective billing

Hi,
I have problem doing collective billing for one of my sales order that consist of 2 item, one is a TAN and the other is a TAS. Because of the different business process, i have to combine the billing of a delivery note (for the TAN item) and the sales order (for the TAS item) into one invoice. However when i do so, i end up with 2 invoices. Pls advise.
Just wondering if the BlCat is different, can the invoice be combine?

Hi,
Invoice split will happen if you have any of the following values are different.
1.Payer
2. Inco Terms
3. Payment Terms
4. Shipping Condition
5.Country
6.Transportation Group
7. Exchange Rate
Click on the Split analysis.You will come to know why the splitting is happening.
The procedure for this split analysis is:
Goto the T.Code "VF02".
Enter the number of the first billing document that you want to compare. Click on Environment --> Split analysis.
Enter the number of the second billing document which you want to compare to the first in the dialog box given.
Click on "Continue".
The system displays the Billing document split analysis log.
Regards,
Krishna.

Problem with character set UTF-16 LE

Hello.
There were difficulties with character set change, using function convert ()
The matter is that in the list v$nls_valid_values the character set AL16UTF16LE does not appear, during too time the inquiry is successfully carried out
convert ([some-national-characters], ' CL8MSWIN1251 ', ' AL16UTF16LE ').
But at giving on an input of the data stored in CLOB, there is an error "a character set is not supported"
What are possible ways of the decision of a problem?

You can try to use DBMS_LOB. SUBSTR to access LOB data like in the following example:
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>
SQL> declare
2 v_i clob;
3 v_o clob;
4 begin
5 v_i := 'a';
6 v_o:=convert(dbms_lob.substr(v_i,1,1),'AL16UTF16LE', 'CL8MSWIN1251');
7 end;
8 /
PL/SQL procedure successfully completed.

Problem with Character set

Hi,
I am facing some problems with Oracle character sets.
I have set the database character set as UTF8.
I have set the environment variable NLS_CHAR to Portuguese_Portugal.UTF8.
I insert a Portuguese text for varchar and clob columns in a table.
However when I select the text from that table, I get some junk values for the clob.
Any help is appriciated. Thanx in advance.
Yash
null

Hi Yash,
Can u tell me how to insert values in a nchar/nvarchar column in
Indian language scripts?
I have set database characterset to 'IN8ISCII'? But while
inserting values in the table I am getting error as characterset
mismatch'
I have tried it using UTF8 chracterset also??
As fa as your problem is concerened, I think u have to set the
nls_ characterset value$ in props$ table
and same for nls_nchar_characterset column also..
Thanks in advance
Manoj mehta

Problems with initial set up for mail and other things

I am having issues with mail set up and getting printers and other things work with Mac Pro Book, since i am new convert i am feeling really frustrated with these things, anyone out there has experince in mac mail set ups and other instatlations like msn messanger etc.

Sorry you are having problems but you need to provide more detailed information about the problems such as what type of email account are you trying to set up in Mail - .Mac, IMAP or POP and is this account provided by your ISP used for connecting to the internet or by an email account provider?
What happens including error messages provided when trying to create the email account in Mail?
Regarding a printer problem, this is the Mail & Address Book forum. You should post a question about printer issues with detailed information such as the make and model of your printer and what you have tried to this point at the Printer & Faxing forum here.
http://discussions.apple.com/forum.jspa?forumID=756
Installing MSN Messenger should be easy. I believe Messenger does not include an installer and is provided as package via a disk image that only requires dragging the application from the mounted disk image to your Applications folder which copies the application package from the mounted disk image to your hard drive.
What problems are you having with installing Messenger?

Problem With Collection Sets

Similar Messages

Maybe you are looking for