Problem with colour used in plot legend

Hi I have problem setting the colour for lines at Plot 0 and 15
Here's attached. I am using LV 7.1 Not sure if it carries bug
regards
Clement
Attachments:
plotlegend.vi ‏27 KB

Hi Clement,
Did this occur after you had been using the plot and changing properties programatically? Do you have ideas on how you arrived at this? It looks like all the plot properties are set up the same.
Regards,
Clint M
National Instruments

Similar Messages

Problem with BAPI_CUSTOMER_CREATEFROMDATA1 using JCo on IDES

sorry, wrong board - i opened a new post
Problem with BAPI_CUSTOMER_CREATEFROMDATA1 using JCo on IDES
Hello everyone,
we are working on a student project and would like to create customers (debtors) in an SAP IDES system.
Using the ref-customer to copy from, and some personal-data below, we get the error message
'Internal error: External no.assignment for reference customer/customer'
We also tried with BAPI_CUSTOMER_GETINTNUMBER, and ACCOUNTGROUP ZINT (New Internet Customer, others won't work?). But CREATEFROMDATA1 takes no CustomerNo created this way, nor it wants to create one 'internal'?
Any suggestions? Thanks a lot for your help,
Greetings,
Tobias Schmidbauer
          inParams = function.getImportParameterList().getStructure(
               "PI_COPYREFERENCE");
          inParams.setValue("0000001000", "REF_CUSTMR");
          inParams.setValue("1000", "SALESORG");
          inParams.setValue("10", "DISTR_CHAN");
          inParams.setValue("00", "DIVISION");
          inParams =function.getImportParameterList().getStructure(
               "PI_PERSONALDATA");
          inParams.setValue("Simpson", "LASTNAME");
          inParams.setValue("Homer", "FIRSTNAME");
          inParams.setValue("Jay","MIDDLENAME");
          inParams.setValue("Springfield", "CITY");
          inParams.setValue("DE", "LANGU_P");
          inParams.setValue("DE", "LANGUP_ISO");
          inParams.setValue("DE", "COUNTRY");
          inParams.setValue("EUR", "CURRENCY");
          inParams.setValue("12345", "POSTL_COD1");
Message was edited by: Tobias Schmidbauer

Hello Brian,
Thanks for your pointer. Actually The customer's reference number i was providing in the PI_COPYREFERENCE structure was a sold-to party customer and it uses external customer number assignment. When i used "New Internet Customer" (that doesnt use external assignment by default) as customer's account group, the customer was created successfully and assigned customer number was returned.
I want to ask now how could we give a customer number in the BAPI as i am unable to find any such column in any of the tables. (Customer number is an "out" parameter so it can only return the number of created customer). Secondly, how to chnage the external assignment property of a particular account group (like sold-to party). i.e, how could we change the account group configurations through SAP GUI??
- Umair

I have problems with colours of the pictures in Aperture:

I have problems with colours of the pictures in Aperture: they becomes pink and green totally "flashy"
I made all of the base reset's but it's already destroy>.
Please, could you help me ?
Thank's,
Philippe

Solution
Delete or restore from Time Machine
/System/Library/CoreServices/RawCamera.bundle
/System/Library/CoreServices/RawCameraSupport.bundle
Download
http://support.apple.com/kb/DL1666
Reinstall 4.07. Finished.

Problems with XY Graph "forgetting" plot properties

I am having trouble with an XT Graph in my loop.
The graph has 10 plots which at any time can have anything from 0 to ~1000 points, often some plots will have significantly less ploints than others. There is a user selectable option to display all points or just the most recent set.
My problem is that I want the graph to reflect the input data by plotting a single point at the time of an update, so I have a string of points rather than a line.
When I right click the graph and go into properties, I change the point style to solid circle and turn off line interpolation. I then click save these values as default, and save the vi.
However, once I run the vi, the graph always reverts plots 1 to 9 (not plot 0, this stays as I want it) to have no points displayed and line interpolation on.
Has anyone had this problem before? Ho did you fix it?
I know it can be fixed, as I had this probelm a few months ago on a similar vi and after weeks of struggle I solved it, however I just cannot remember how I did it.
Thank you for any help, at the moment I can't post any code. Note that the data the graph shows is all perfectly fine, just the plot properties are being forgotten.
Solved!
Go to Solution.

HI DarraghCorrigan,
In relation to the problem expressed in your initial post:
"once I run the vi, the graph always reverts plots 1 to 9 (not plot 0, this stays as I want it) to have no points displayed and line interpolation on"
This is due to a bug in the LabVIEW software whereby any changes that are made to the plot properties (e.g. to change the colour of a plot) will not be retained, except in plot 0 which is unaffected. Our R&D department are currently investigating this problem so that it can be fixed in future version of the software. The recommended workaround for this problem is to pragmatically set the plot settings at the beginning of the code using property nodes.
As I understand it, this is not the main problem that you are experiencing. If you set up the properties for a plot (using some of the described property nodes) which is subsequently removed or rewritten on an XY Graph, my understanding is that there is no way that LabVIEW can remember and retain these properties.
As you rightly suggested, one way of conveniently overcoming this problem would be to set default plot properties so that when you remove/rewrite a plot and then add it again, it will always default to those properties. Unfortunately, it is not currently possible to do this though it has been recommended as a product suggestion so it is a feature that is under consideration for implementation in future releases of LabVIEW.
I think the issue you need to be addressing is the fact that you are at some point resetting the graph by sending an empty array to it such that all of your properties are lost. If you can find and remove this section in your code, you should be able to overcome your problem.
I hope this helps.
Best Regards,
Christian Hartshorne
NIUK

5700 TV-OUT problem with colours

Hi!!! I'm trying to fix the problem with my vga, but I could not get it fixed... The problem is that sice yesterday the colours in TV-Out mode is wrong, it appears that is on iverse colours, but I cannot change it. I had already reinstaled the nVidia 56.72 driver, reinstaled Windows XP SP1, and didn't work. Earlier today, I tried to connect the composite video cable and get the right colours, but just before I connected the S-Video again to check if the colours was right as composite, but for my sadness, it wasn't. Then I reconnected the composite and the colours was worg that out too, now the two TV-Outs, composite and S-Video are with the wrog colours... I don't know what else to do... help me!!!
Thank you anyway.

Hi,
Try changing the TV standard. Brazil uses a less common PAL-M standard, which uses NTSC line and field rates (525 lines,60 fields/sec) and a unique colour subcarrier frequency, which is close to the standard NTSC frequency. For more details on TV standards, look here.
You might have to experiment to find the combination which works best with your TV set.
Cheers

Gradient Problems with colours

Hi I am new to Illustrator (just bought CS5) and I am having trouble with the colours when using gradients (colours are generally duller as well) but when I make a gradient from red to black the computer automatically puts a grey inbetween, (photoshop has no problems the colours are clear and bright) I recently did a tutorial http://veerle.duoh.com/design/article/illustrator_inset_effect_on_text_in_combination_with _clipping_mask (she had the same tutorial in photoshop, which worked great) but my colours in illustrator are having this grey issue and the image came out looking very dull.
Is there some file setting I may have changed to cause this?
Thank you

The color setup in AI is trying to simulate the way CMYK actually looks in print. Sometimes the simulated display goes overboard, and it's impractical to write you a textbook on the whole color management (color calibration) subject in a user forum. (Plus, replies in a user forum are as often wrong as right.) There is plenty of reading material out there for you on this. (Start with the Help files, as the Color Settings dialog suggests.)
When designing for CMYK print, work in a CMYK document. Switching color modes is bad practice, especially if you intend for your on-press values to actually be the values you specify in the document. For example:
1. Set up your red (100M, 100Y) to black (100K) grad.
2. Change Document Color Mode to RGB.
3. Change Document Color Mode to CMYK.
4. Look at what has happened to your original CMYK values.
The best way to work in CMYK is to have a basic understanding of CMYK and the real-world principles of process printing. For example, if you do as Jacob suggests, and make the black end of your grad also contain the "red" (100M, 100Y), you will have a 300% total ink coverage at that end of your grad. That may or may not be a problem, depending on the target printing environment.
Generally speaking, yes; CMYK print is almost always "dull" compared to viewing RGB on a monitor (and you are always viewing RGB on a monitor, even if it is shifted to simulate CMYK). This is true regardless of color calibration. Common sense goes a long way. Monitors glow; paper doesn't.
One of the most overlooked facts is that human vision is highly adaptive. Even in RGB, your monitor never displays anything even approaching a true black. Yet your eye nonetheless sees a dark rich black.
CMYK process, for example, is very poor at reproducing brilliant blues. Yet the combination of knowledgeable image color correction (as opposed to mere calibration), quality printing, and the adaptive nature of human vision can nonetheless result in printed blues that seem to "glow."
If you're designing for commercial print, you should seek to understand the process enough that you would be comfortable assigning colors while working on a grayscale monitor. Again, that comes from both study and real-world exposure. Actually visit the press room whenever you have the opportunity. Maybe even take a course in commercial repro at the local tech school. You can't really gain the understanding you need in a software user forum. This is a huge subject.
JET

Having a problem with creating/using a primary key on a view

I have a problem with a primary key on a view
I created the view and primary key as follows:
CREATE OR REPLACE FORCE VIEW "MDD"."ROCK_LU" ("DESCRIPTION",
UNIQUE ("DESCRIPTION") RELY DISABLE,
CONSTRAINT "ROCK_LU_PK" PRIMARY KEY ("DESCRIPTION") RELY DISABLE) AS
SELECT DESCRIPTION
FROM MRMC_LU
WHERE ROCK = 'T';
The view with the primary key appears to have been created as there were no error messages. (The above was from the sql tab in sql developer.)
When I try to create the foreign key on my mdd_hr table - I get an error
/* hr_name - foreign key */
ALTER TABLE mdd_hr add CONSTRAINT hr_name_fk FOREIGN KEY (hr_name) REFERENCES rock_lu(description);
Error report:
SQL Error: ORA-02270: no matching unique or primary key for this column-list.
When I lookup the index in sql developer, rock_lu_pk is not there.
All my other foreign keys work - but I don't understand what I am doing wrong with this one. Please help.
glenn
Background - as to why I want to use a view as a lookup table.
The MRMC_LU table that the view is created from is structured like:
DESCRIPTION - MINERAL - ROCK - MODIFIER - COMMODITY
ANHYDRITE - T - T - T
APLITE - T - - T
GRAPHITE - T - - - T
GREYWACKE - - T
DESCRIPTION is a list of all names of minerals, rocks, modifiers and commodities. T is entered in each valid field. Often a description name is used for both a mineral and a rock or a mineral and a commodity or any other combination. Because this database is just starting up, it was more efficient to create one table that could be updated (and thereby automatically update the MINERAL_LU, ROCK_LU, MODIFIER_LY, COMMODITY_LU views) rather than create and maintain four separate but similar tables. A primary key cannot be generated for the MRMC_LU table as there are nulls in each column
except DESCRIPTION.
Perhaps there is a smarter way to do this?

http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_85a.htm#2065512
You can specify constraints on views and object views. You define the constraint at the view level using the out_of_line_constraint clause. You define the constraint as part of column or attribute specification using the inline_constraint clause after the appropriate alias.
Oracle does not enforce view constraints. However, operations on views are subject to the integrity constraints defined on the underlying base tables. This means that you can enforce constraints on views through constraints on base tables.
Restrictions on View Constraints
View constraints are a subset of table constraints and are subject to the following restrictions:
You can specify only unique, primary key, and foreign key constraints on views. However, you can define the view using the WITH CHECK OPTION clause, which is equivalent to specifying a check constraint for the view.
Because view constraints are not enforced directly, you cannot specify INITIALLY DEFERRED or DEFERRABLE.
View constraints are supported only in DISABLE NOVALIDATE mode. You must specify the keywords DISABLE NOVALIDATE when you declare the view constraint, and you cannot specify any other mode.
You cannot specify the using_index_clause, the exceptions_clause clause, or the ON DELETE clause of the references_clause.
You cannot define view constraints on attributes of an object column.
Rgds.

Problem with sendRedirect using relative URL in WebLogic 5.1 with SP7 & 8

I patched to SP 7 (and also 8), and the request.sendRedirect() with relative
          URL failed. The browser simply displayed "404 - Page not found".
          This problem only happens in a cluster environment attached to a web server.
          SP6 or earlier does not have such problem.
          I noticed that the latest SP always formats the URL and returns it as a full
          absolute URL to the browser. The problem is it uses the Weblogic Server host
          URL where the request is processed (not the Web Server host URL) which is
          not visible to the internet.
          Is it possibly a bug in SP?


I patched to SP 7 (and also 8), and the request.sendRedirect() with relative
          URL failed. The browser simply displayed "404 - Page not found".
          This problem only happens in a cluster environment attached to a web server.
          SP6 or earlier does not have such problem.
          I noticed that the latest SP always formats the URL and returns it as a full
          absolute URL to the browser. The problem is it uses the Weblogic Server host
          URL where the request is processed (not the Web Server host URL) which is
          not visible to the internet.
          Is it possibly a bug in SP?

Problems with text using Photoshop CC on Windows 8.1

I am using Photoshop CC on Windows 8.1. I get flickering on the screen as described by others. My main problem, however, is that when I try to use the text tool the layer goes completely black and I cannot see what I am typing or edit the text. I have tried updating my video card driver and my monitor driver. I have deleted the font cache file, I have tried using Photoshop without plug ins (I use Nic plug ins). The only thing that has worked is resetting the preferences by holding down alt+control+shift keys when starting photoshop. This allows me to enter text normally on one photograph and one only. Once I have completed that first photograph and load another I get the black layer. I desperately need help. If this continues I will have to cancel my membership as I was much better off using my Photoshop Elements 11 disc.
Any help will be very gratefully appreciated...............help seems to be very difficult to come by Adobe you make it very difficult for your customers!

Ok,I can appreciate that I may not have given enough information. You state that without proper system information nobody can help, but I need to know what information is needed. You also state that I should simply turn off hardware acceleration in the perfs. What does that mean? How do I do that? I have tried changing the GPU Drawing Mode to basic and it didn't work. Is this what you mean? You may be assuming a level of knowledge I do not have. From research I have done this seems to be a problem with windows 8.1 that Adobe have been aware of for about a year. I have followed all the online advice I have been able to find but nothing seems to be working.
Siren2110

Problems with navigation using JSF 1.0 RI

I have a problem with faces in that navigation simply stops working. I have a page which have prev/next buttons on it, and a cancel button. Each button is of the form
<h:form id="viewxxx">
<h:commandButton value="XXX" styleClass="buttonInput" action="#{somebean.doSomeAction}"/>
</h:form>
The code behind the next/prev button action returns "success", the cancel returns an action string which returns the user to the previous screen.
After clicking on prev/next a few times one of two possible things happen:-
(1) the navigation stops working (all buttons do nothing)
(2) or after pressing a button a few times the navigation starts to work.
I tried to simplify things to find out if my backing code was causing the problem. I included a very simple button:-
<h:form id="view_c_getridofme">
<h:commandButton value="Test" styleClass="buttonInput" action="success"/>
</h:form>
and after clicking this a few time it also breaks the navigation. So I suspect something strange is going on inside the Faces implementation.
I checked the faces-config.xml and this is correct:

<navigation-case>
<from-outcome>success</from-outcome>
<to-view-id>/viewcorr.jsp</to-view-id>
<redirect />
</navigation-case>
I tried (albeit briefly) MyFaces 1.0.3 and the navigation does not break although it does present some other issues for me. My preference would be to use Sun's JavaFaces implementation if possible.
Can anyone shed light on this - why this may be happening?

I experienced the same problem while re-submitting to the same page about 15 times via a command button (a list page that would get updated with every new submit).
After having turned JSF logging on I discovered that my stylesheet (!) was interpreted by JSF as a Faces view (because of the /faces/-mapping before it) and that this caused the list page to be (incorrectly) added up towards the maximum of 15 views in the session. After 15 reloads JSF would remove the list page from view, re-create it, and I experienced the same problems as you described in the top post - no navigation worked.
My stylesheet used to be:
<link rel="STYLESHEET" type="text/css" href="../../css/foo.css">
... which kept the /faces/ mapping from the page containing the css reference, and made it look like a faces view to JSF.
When I switched to:
<link rel="STYLESHEET" type="text/css" href="/css/foo.css">
... the problem disappeared.
Hope that helps all of you that have this problem. It certainly took me quite a while to figure it out!
Mattias L

Problem with scrolling using my touchpad with the new Firefox update

I just updated Firefox to 9.o.1, I run Windows 7 and I'm using a HP G62 Notebook PC. Ever since I have updated, I can no longer scroll on webpages using my touchpad. If I use an external mouse, I have no problems. I have also not had any problems with other applications, so I assume that this problem is related to the new update. Is there anything that I can do to fix this now, or will I have to wait for the next update?

I just updated Firefox to 9.o.1, I run Windows 7 and I'm using a HP G62 Notebook PC. Ever since I have updated, I can no longer scroll on webpages using my touchpad. If I use an external mouse, I have no problems. I have also not had any problems with other applications, so I assume that this problem is related to the new update. Is there anything that I can do to fix this now, or will I have to wait for the next update?

Problems with output using html2fo function

Hello,
I have a problem with output when using html2fo function.
My sample xml:
<?xml version="1.0" encoding="UTF-8"?>
<RTECODE>
<![CDATA[
<table border="1">
<tr>
<td>row 1, cell 1</td>
<td>row 1, cell 2</td>
</tr>
<tr>
<td>row 2, cell 1</td>
<td>row 2, cell 2</td>
</tr>
</table>
]]>
</RTECODE>
Can anybody explain why the rtf template output is different in pdf, rtf, excel ? It looks ok only in pdf.
Thanks in advance.

Check these
http://docs.oracle.com/cd/E23943_01/bi.1111/e22254/create_rtf_tmpl.htm#CHDCEEIJ
https://blogs.oracle.com/xmlpublisher/entry/html_in_xml_support
If helps mark
Edited by: Srini VEERAVALLI on Feb 25, 2013 10:04 AM

Problems with "new" used iPhone

hey guys,
i have a problem with my new iphone. i bought an iphone on ebay and now i want to use ist with my t-mobile-sim-card, but it doesn't work. First it worked, but i found out, that the iPhone was jailbreaked, so I updated it to firmware 3.1.3 to delete this jailbreak. but it doesn't work now with my simcard (it's not a prepaid) and itunes says, that the card isn't compatible. maybe someone can help me... it makes me very angry. i spend so much time to get the money for the iphone and now this ****...

When you installed the new 3.1.3 firmware you locked the phone back with att. Previously being jailbroken and unlocked allows you to use other sim cards but now that you updated the firmware its not possible. What you can do is wait for someone to come out with a way to jailbreak the new firmware and unlock it yourself.

Problems with Restoring using Migration Assistant

Hi
I'm trying to restore my files from time machine using Migration Assistant. I keep getting this message which I don't understand. Can anyone advice ? Thanks.
+NTFS-3G could not mount /dev/disk1 at Volumes/Untitled because the following problem occured: Error reading bootsector: Input/Output error. Failed to mount 'dev/rdisk1':Input/output error NTFS is either inconsitent or there is a hardware fault or its a SoftRAID/ FakeRAID hardware. In the first case run chdksk/f on Windows then reboot into Windows. The usage of the /f parameter is very important! f the device is a SoftRAID/ FakeRAID thenfirst activate it and mount a different device under the /dev/mapper/ directory, Ie.g. /dev/mapper/nvidia+eahaabcc1). Please see the 'dmraid' documentation for more details.+
Jojos

I don't do Windoze, but that looks like you've backed-up a virtual machine via Time Machine, and there's a problem with it.
First question: why are you restoring, and why are you using +MIgration Assistant?+
If you want to restore everything from your backups, do a full system restore, per #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
Most folks exclude those from Time Machine, and back them up separately.
Your best bet is to skip the contents of the folder they're in while running +MIgration Assistant+, then restore everything else in that folder selectively, via the "Star Wars" display. You may or may not be able to restore the vm file(s), but at least you should be able to get everything else that way.

I have problems with my used iphone.

Hello there. I recently purchased a used iphone from a friend. However he took the sim card out as he needed it for his other phone.
I have tried inserting my new at&t sim card, as well as a new blank one but when i want to activate the phone itunes keeps saying "there is a problem with your iphone". What can i do in this situation? Thanks.

Yes, you should go back to AT&T and let them know the SIM card is for an iphone. Only iphone SIM cards will work in the iphone. AT&T sells SIM cards that will work in many different phones, but only the SIM card designed for the iphone will work in it correctly.

Problem with colour used in plot legend

Similar Messages

Maybe you are looking for