Problem with communication channel on receiver side with file adapter
Hi all,
I m doing a scenario of collection of multiple idocs into a file.When i m testing this scenario,i m getting a flag successfully executed in SXMB_MONI.But,my file isn't created in my directory.When i monitor the communication channel in Runtime workbench,it's showing error :<b>Channel has not been correctly initialized and cannot process messages</b> for my receiver file adapter?I am not able to figure out the error.Anybody having idea about this problem.
Regards,
Anoop
Hi Anoop
Check it - File adapter is active ? try to Re-activate the same.
Also do CPACache Refresh.
Still problem, tyr out by restarting the Adapter Engine
Cheers..
Vasu
<i>
Reward Points if found useful **</i>
Similar Messages
-
How to archive file on the receiver side using file adapter
Hi All,
In our company we have many file to file scenarios some of them for B2B communication. We want to archive all the files that are sent from vendor to our company. Is there a way of archiving the orignal files being sent by the vendors?
Regards,
Xier
Message was edited by:
XIerhey
>>we want to archive the files before they are processed by XI, i.e the way the sender adapter picks it up.
well if the files are not picked up by XI then they will stay in the sender directory then why do u want to archive them and create a duplicate copy.
files are archived when they are picked by sender file adapter so that in future if we have any issue in message transfer we can resend them,simple set the mode as archive in the sender CC.
Thanx
Aamir -
How the campaign with communication channel telephone picks the mobile No.?
Hello All
I created a marketing campaign with communication channel telephone the cal l list is only generated for the telephone number but I want it to pick the mobile phone number and use it. If I put the mobile number only it gives me error that the communication is missing
Regards
Jacopo FransoicePlease try this:
Assign the target group again. Assign the already prepared target group to your campaign. Assign the Channel: Telephone (with activity creation). Release and Execute the campaign on the Assignment Block Campaign Details. Execute the campaign for the target group. Schedule the batch job to be executed immediately.
Please tell me if it doesn´t work.
Thanks,
Marcus -
XI - restrict access to Communication Channel and Receiver Agreement
Hello Experts,
We are trying to restrict the access to certain communication channels and receiver agreement in our XI system. We are able to restrict access to business service but not the afore mentioned objects.
Our XI system version is 7.0 with SP level 17.
Thanks
VijayaWe raised an OSS message and found that the issue was due to a missing JAVA patch
-
Problem in Communication channel monitoring..
Dear friends,
I am facing a problem in Communication channel monitoring.
Problem:
I have designed several communication channels in the Integration directory.
To check the status of channel i will go to RWB->Component Monitoring->Adapter Engine->Communication channel monitoring, then we have a selection screen to filter out the channel, adapter,etc..
Here i am NOT seen any channels to filter out. I.e. Channels in the Integration directory are not reflecting here.
Can you please help out on this?HI,
Do the CPACache refresh .
ALso check this SAP Note- 937382
Regards,
Moorthy -
Do we have any Acknowledgement concept At receiver side of JDBC Adapter
Helo,
Do we have any Acknowledgement concept At receiver side of JDBC Adapter?
Thanks,
SooryaHi venkat,
For receiver JDBC adapter message can be sent synchronously and asynchronously.
In case of SELECT statement only synchronous makes sense..since the JDBC adapter will select some rows/columns and return it.
In case of other statements (UPDATE,INSERT,DELETE) if the message is sent synchornously.. u will get only the no of rows affected..so these can be treated as acknowledgement...
Regards
Biplab
**Reward points if it helps u** -
MQ 2 FILE scenrio - can not communicate with communication channel
hello
trying to run MQ 2 file and the file is in the MQ and the communication channel of the sender write me in the RWB this message
XI inbound processing failed for message at 2008-04-15. JMS and XI identfers for message are ID:.......
JMS adapter will rollback database and JMS session tranactions.
does any one know what is the problem with the Queue? why does the sender does not recieve the message and I dont see it in SXMB moni?Seube wrote:
mmm it seems I spoke too quickly, things seems to work as expected now. I don't know what I did change since.
I've retested between two cards: it seems also ok except 2 strange things:
- when CAN2 is physically connected on PC2, it seems CAN1 that listens instead (as if CAN1 was connected)
- trames sent from CAN0 and CAN1 on PC1 seems to be repeated from IXXAT card: they are returning respectively on CAN1 and CAN0.
Sorry, no idea on these two. As for the first one, what happens if you connect CAN1 to CAN2 on PC2 (no connetion to PC1)? I don't know anything about the IXXAT card. Is there some switch that internally bridges the two ports? -
Party communication channel for multiple stores with multiple user id and passwords in sap pi
Hi Exeperts,
I have a scenario proxy to SAOP . where i am sending some information from my stores to third party company with single user id and password in communication channel.
but requirement is changed now i have 20 stores with 20 user id and password for communication channel.how can i achieve this requirement?
Can i create 20 communication channels for 20 stores or can handle through the party based communication ?
Please help us achieve the requirement.
Regards
Ravinder.sHi,
In the SOAP Receiver adapter, you can only store 10 userid/password combinations via Authorization Keys. These are called via Dynamic Configuration via technical name TAuthKey. In your case, for it to work, you need:
1. 2 business components/2 SOAP receiver communication channels.
2. 1 receiver determination with xPath for username to determine correct business component
3. 1 interface determination
4. 2 receiver agreements (one for each cc)
Hope this helps,
Mark -
Creating Multiple Files with different name at Receiver side
Gurus -
Can anybd tell me how to generate multiple files at the Receiver side in the given target directory with different file names?
One source message will contain number "N" using which we have to generate files "N" number of times at the Receiver side.
Kindly help.hi,
are you following this blog?
provided you have SP>14 and no IDOC/HTTP involved.
and have you got the error you mentioned when testing with sample payload?
from where did you take the payload? if is from SXMB_MONI make sure you dont have <MESSAGE> tags in the payload,generally systems adds <MESSAGE> tags when you do multi mapping.
get the payload from SXMB_MONI right click ->view source payload(this is raw data) and test it.
it should be ok now.
and refer my discussion in the thread ,as I got he same error.
Split mapping created no messages -Mluti Mapping -
Synchronous JDBC adapter(receiver side) with stored procedure
Hi experts,
Can some database processing logic be included in receiver JDBC (synchronous) adapter...to put it simply
I have synchronous JDBC adapter in the receiver side..Using this JDBC adapter I want to get some response back from the table..
The requirement is not a simple fetch from the table..It involves some processing in the database side which I guess will be done by stored procedure..After this database processing , this output will be picked up by the JDBC adapter and will send to PI.
How can this be achived ..Any Blog..
Thanks
AyanYes u can use stroed procedure and send back the response,
refer this link for stored procedure structure.
http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
chirag. -
Problem in communication channel
Hi
I am new to xi and doing file to file scenario. In Receiver communication channel i am using file content conversion for text file. In adaptor monitering it is showing the error
Initialization error: Conversion initialization failed with java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Parameter '.fieldFixedLengths' or '.fieldSeparator' is missing
Eventhough i specified the fieldFixedLengths and fieldSeparator.
Thanks
N.Surendrahiii,
You have to give recordset.fieldSeparator = 'nl'
I think u give record.fieldseparator
Could u paste ur receiver structure and also paste ur Recv CC parameter here..
Regards,
Balaji -
Dynamic Communication Channel in Receiver Agreement
Hi Experts,
I have the situation: one Receiver System with one Inbound Interface. This Receiver System is able to receive messages on this interface through different Communication Channels.
I want to have a possobility, based on message content, to dynamically select which Communication Channel to use.
So is it possible to do such a config, without dublicating the Inbounb Interface with a different name (maybe to set some values in Java Mapping?)?
Best RegardsI have one Receiver System, so maybe, you mean conditions in Interface Determination
No. I meant receiver determination only. You use same receivers in more than one cases.
As asked, why do you need multiple channels?
Regards,
Prateek
Edited by: Prateek Raj Srivastava on Feb 27, 2009 6:58 PM -
Wi-Fi Access Point with B Channel or Wi-Fi with B Channel
What does Wi- Fi with B channel or Wi-Fi Access point with B Channel mean. Can someone explain me. I am confused
I don't know what your asking. if your talking about 802.11b, that is a standard and you can compare the difference of 802.11b, 802.11a, 802.11g, 802.11n and or 802.11ac. Wireless devices, that means client devices have to be able to support the standard that the access point is using. So if an access point is 802.11b only, the wireless client device has to be able to support 802.11b. If for example, the access point is 802.11b/g/a/n/ac, that means the client has to be able to support at least one of those standards to be able to connect.
Just take a look at the standards, here is a link to a quick comparison.
http://compnetworking.about.com/cs/wireless80211/a/aa80211standard.htm
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered" -
OS command in Communication channel to change property of file...
Hi All
Can anybody let me know the OS command (to be written in command line prompt in receiver file channel) to change the property of a file written on Application server.
A file is getting written on PI application server by a communication channel. Now how can we direct that channel to change the file's property of Read/Write/modify(777) while writing it to the location.
Thanks in advance.Hi
If you want it dynamically, use a post processing srcipt
For unix Application system command is
chmod <file name> 777
For Windows Application system command is
ATTRIB [+ R|-R] [A|-A] [ H|-H] [+ S|-S] [d:][path]filename [/S] -
Receive location disabling(File Adapter)
Receive location is automatically disabling . Note: In the rcv loc. I am giving proper authentication details of user(who has full control on "Folder"
Errors:" The Messaging Engine failed to add a receive location "Receive Location1" with URL "\\Server\Folder\File" to the adapter "FILE". Reason: "File transport does not have read/write privileges for receive location
"\\Server\Folder\". "."
"File transport does not have read/write privileges for receive location "\\Server\Folder\"."
"The receive location "Receive Location1" with URL "\\Server\Folder\File" is shutting down. Details:"The Messaging Engine failed while notifying an adapter of its configuration. "."Hi,
"This behavior occurs because the account or accounts that the BizTalk Server receive location is using to access a folder or a file share do not have the correct permissions at the file system level or at the file share level. " - Refer this Knowledge Base
from Microsoft:
A BizTalk Server receive location that is configured to use the File transport type is disabled
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.
Maybe you are looking for
-
Printing 1 page on screen over 8 pages- why?
Here's a frustrating print problem Yosemite: The problem is that a single page document open On SCREEN prints multiple pages in large print size instead of the 1 page on screen Example: Quicken 2007 updated for Yosemite has a financial one page repor
-
Every time a site presents pdf documents and I select one - all I get is a black window.
-
Cannot use &SAP_EDIT command on SE16N on some tables
Hi, this is probably something easy to explain for all the experts out there: I was asked by one of our developers the reason why he couldn't use the &SAP_EDIT command on some Z* tables. When I tried it for myself, I could see that in fact the comman
-
[URGENT]: BSEG performance issue
Hi experts, Need help on how to improve on the performance of select from BSEG table. Points will be rewarded. Thanks! IF i_vbappay[] IS NOT INITIAL. SELECT bukrs belnr zuonr vbel2 posn2 gvty
-
About account determination in cash sales
there are five standard criterias in account determination: chart of accounts, sales org, payer, material, and account key; my question is when i process cash sales, the five criterias maybe the same as the standard sales, how can i differentiate the