Problem with Compaq Presario V6000 laptop

Hi forum members! I am a newbie to this forum and i would like to introduce myself, my name is Hammy and I am from Glasgow. I have a problem with my laptop whih is a Compaq Presario V6000 running windows Vista, 32 bit product number V6254EA.
A few weeks ago when i turned on the computer it failed to boot up, the only thing visible on the screen is the bar at the bottom of the screen with `Microsoft Corporation` displayed below it.
I have tried starting it up in SAFE MODE but all that happens is that a certain amount of windows system drivers are loaded and then goes no further!
I have purchased recovery discs with no joy! I have also tried a hard reset which has not solved the problem. I tried the `hard drive self test, which after approx 30 seconds carrying out a quick test displayed the following message #1- 07 Fail.
If it is the hard drive or the motherboard that has failed is it possible to replace them.
Thanks

Did you burn the recovery disks? Will follow up with the manual and a link to buy the hdd.

Similar Messages

Problem with Compaq Presario CQ60 Laptop

Periodically laptop will not turn on. I had a message "critically low battery". Tried plugging in and no response. couple of days later, computer responded and did turn on. This situation causes great distress as I fear work will be lost forever. do i need new battery? Please advise. Helene

Hi,
Let me summarize, your laptop won't start from time to time and you had (have?) a "critically low battery" message.
When your laptop doesn't start, plugging in does not help.
When you face the problem, try to remove the battery from your laptop, plug it in and try to boot without the battery.
Batteries are well known to cause that kind of issue and if your computer does start without the battery then you may need to replace it with a new one.
But before you purchase a new battery, have a look there :
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00821536&lc=en&cc=us&dlc=en&product=3791961
This tool will certainly help you.
Regarding your files, even though at that point there seems to be little to fear, you should always back them up as they are more valuable to you than any piece of hardware!
With an up to date backup, anything can happen to your computer, you're safe otherwise there is always a tiny chance they can't be recovered (it's impossible, as an example, to recover files from a stolen laptop...)
Cheers.
Service is the lifeblood of any organization.
Everything flows from it and is nourished by it.
Customer Service is not a department... It's an attitude

I want ribbon cable for my compaq presario V6000 laptop

I want ribbon cable for my compaq presario V6000 laptop: cable code is: AWM E118077 2896 80C VW-1 POWER RIBBON CABLE.
where to get it from?
Please help as i am unable to find this on online sites ,all are from USA,China etc.

MaheshGupta wrote:
I want ribbon cable for my compaq presario V6000 laptop: cable code is: AWM E118077 2896 80C VW-1 POWER RIBBON CABLE.
where to get it from?
Please help as i am unable to find this on online sites ,all are from USA,China etc.
Cable code isn't going to help what you need the the cable part number. Without this no one will be able to help you locate the cable. Also you should tells us the P/N that will insure someone can look into what the part is and also what is that cable for as there is no discription what it does or connects to.
How Do I Find My Model Number or Product Number?
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Installation problems in Compaq Presario V2617LA Laptop

Hello,
I am new in all of this Unix-Linux world and I need some help, here's my problem:
I have already partitioned and prepared my HDD to install Solaris, Windows and maybe Fedora (if someone recommends a better Linux it'll be appreciated), all of those three partitions perfectly identified and ready for the OS (it happens that I learn quickly, but I'm still new on this). I perfectly pass all Solaris 10 11/06 installation windows and requirements and Solaris begins installation, BUT when it all looks great, the installation (progress bar) just stops moving having 209.29 MBytes remaining and installing the 'Solstice Enterprise Agents 1.0.3 files for root file system', the wierdest thing is that the little slash-dash at the end is still turning around, the working processor light is on and nothing freezes (except when I navigate through the menu options), I have waited for a whole day and the installation does not finish and even re-downloaded Solaris and burn the image again two times and nothing.
Could it be a hardware compatibility problem? What do you think?
My Laptop specs are the following:
Product Name      Compaq Presario V2617LA
Product Number      EW998LA#ABM (Spanish version)
Microprocessor      1.8 GHz Mobile AMD Sempron� Processor 3000+ with PowerNow!� Technology
Microprocessor Cache      128KB L2 Cache
Memory      512 MB 333 MHz DDR Dimm 2
Video Graphics      ATI RADEON XPRESS 200M IGP
Video Memory      128MB DDR (shared)
Hard Drive      60 GB 4200RPM
Multimedia Drive      DVD�R/RW and CD-RW Combo Drive with Double Layer support
Display      14.0� WXGA High-Definition BrightView Widescreen Display (1280 x 768)
Fax/Modem      High speed 56K modem
Network Card      10/100BASE-T Ethernet LAN (RJ-45 connector)
Wireless Connectivity      54g� 802.11b/g WLAN with 125HSM SpeedBooster support
Sound      Internal Speakers
Keyboard      101 key compatible
Pointing Device      Touch Pad with On/Off button and dedicated vertical and horizontal Scroll Up/Down pad
PC Card Slots
* 1 Type I/II 32-bit card bus (also support 16-bit)
External Ports
* 2 USB 2.0
* 1 VGA (15-pin)
* 1 RJ -11
* 1 RJ -45 (LAN)
* 1 headphone-out
* 1 microphone-in
* TV-Out (S-video)
Power
* 65W AC adapter
* 6-Cell Lithium-Ion (43Whr)
Thank you in advance!!

I `m sure that i completely uninstall it from the 1st laptop..
I don`t want to sight out from my desktop,the 1st laptop is in an...other country. [of course a friend of mine have it]
I mail to him to try to uninstall any files or something from there..
if i solve the problem i install to 2nd laptop

Sound Problem with Compaq Presario

Hi,
I am using a Compaq Presario SR 1630IL desktop, Prod # EG224AA#ACJ, S/N INI54709VG. In my system Windows XP and Ubuntu 9.4 are installed with Ubuntu as the default OS. The PC is using Realtek ALC 880 sound card. The linux sound module is snd-hda-intel.
My problem is with the sound in linux. In windows the sound is very fine but in Ubuntu it is very less although my external amplifier is in full volume and the internal audio mixer too. I am using ALSA latest version for ubuntu.
I have tried all the howto's available in the webbut couldn't improve the situation. Is there any problem with ALC880 chipset in lunux.
Eagerly waiting for the assistanse from HP
Thanks
Message Edited by asamay81 on 07-03-2009 10:53 AM

I formated my c-drive....and currently i am using updated HP audio driver Conexant High-Definition Audio Driver
and other drivers like modem,chipset....even then only back graund music is comin but voice is not(vispering type of voice)
I dont know which BIOS version i am using.... How to see that...
I went to HP service center they told me.......may be port problem will be thr......and port is integreted in motherbpard so...u hav to replace the motherboard........I realy dont know what to do.....
And one more thing what I notice is that.......start<control pannel<sound.....here only speaker option is coming not the headset.....so i dont know exactly...what should i do...........
shraddha

Wireless and batter problems with Compaq Presario CQ45-315TX Notebook PC

Was using my Compaq a year or so when it suddenly stopped detecting the battery. Short time after it stopped detecting the wireless module (listed as error 702 during startup).
I've already made sure all of my drivers are up-to-date, automaticaly and manually. I read in other forums that a BIOS update would fix both of these problems. I downloaded the reccomended update to go from BIOS Version F.66 to F.66A. I'm not sure if it actually worked as the update was to the same versio and ID as the existing BIOS.
Is there another update for BIOS F.66 as the ones I've tried don't seem tio change its version after they run, or is there another solution to this problem?

Hi,
Try the following.
Download the Conexant HD Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45166.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the Conexant device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the Conexant installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Problem With Compaq presario V3500

Currenty i have used Compaq V3500 since september 2008 ( before i bought CQ40-308TU, since i feel satisfied with HP-Compaq product). but a few days ago, my notebook suddenly crash, after (unfortunally) my guarantee has expired. After i can solve the crash, and can enter into system, my ram only detected 1GB( i have been upgraded into 2GB). i tried to check and test whetever sodimm is dead. but after i check, the reslt for my sodimm is alive. i found later, the problem is on the socket for sodimm, one socket is dead. since my guarantee is expired, i tried to service at general notebook service centre. but they also give up for this matter. they suggestion is to change the mainboard with new ones, and this will be costly enough. could anyone suggest the other option to fix this problem without replace the mainboard with the new one??or this was already general problem for V3500 user from the start?( maybe v3500 is a failure product from HP-compaq?)
This question was solved.
View Solution.

With a dead memory slot your only option is a new motherboard. Yes, the whole V3000 line is a cousin to the Pavilion dv6000 line, which has not been a sterling performer to say the least.

Intermittent boot problem with Compaq Presario V6305NR

On pressing start button, laptop starts, but blank screen comes. After every few seconds, it keeps on rebooting, but nothing happens.
I have tried pressing F10 and Esc button on startup, but nothing happens.
Moving finger over multimedia touch buttons causes them to beep.
Few times, it shows the BIOS, but does not detect the hard-drive.
Very rarely, everything works fine and OS boots and works fine (without any sign of problem).
I replaced RAMs, hard-drive and DVD Reader in other laptop and there they worked absolutely fine.
I even tried removing the battery, connecting external monitor, keyboard, but nothing worked.
BIOS version is F.3D.
When opened, CPU fan and heatsink were dustfree.
Product Specs: HP Presario V6305NR, 1.6 GHz AMD Turion™ 64 X2 Dual-Core Mobile Technology TL-50, 1024MB DDR2 System Memory (2 Dimm), NVIDIA GeForce Go 6150 (UMA)
Rahul Singhai
This question was solved.
View Solution.

After few days my laptop stopped starting.
It showed no activity, as its motherboard had got fired up.
It was fault on their side (the faulty BIOS fan control algorithm), that let the motherboard to over heat.
I updated the BIOS, but it was too late by then.
Luckily my laptop was still in extended warrenty period (2 years from date of purchase).
I sent it to their service center and they repaired my laptop free of cost.
Its working fine now.
Rahul Singhai

Problem with Compaq Presario F700, F767NR

I am having trouble with my laptop,
-The bottom gets hot fast
-Shuts off unexpectedly (it is almost like the battery dies but it is within 30 minutes or less of the computer being fully charged)
- When the computer is started up the screen that has the horizontal scroll bar, it will stay on the screen not leaving it until the computer is restarted manually with the button and the computer is restored. ( I believe there is a correlation with the installation of updates and programs makes this more likely to happen)
-When the computer is on and the lid is closed, when it is opened again it takes and unusual amount of time upwards of 5 min to get a picture to show up.
I would greatly appreciate any help anyone could give.

try cleaning the fan. I had to open mines up and clean the fan real good and also put new thermal paste on the cpu also

Problems with Compaq Presario CQ61

I have a Presario CQ61 and recently updated the iTunes software installed. Everything worked fine until I went to shut down the computer. While waiting for the windows menu to load it crashed, since then it hasn't worked (some 5 days).
When I turn it on it asks if I want to restart in normal windows mode of safe mode (recommended).
I have tried both options. They both seem to work, the green bar moves but then I am faced with an indeffinate blank screen.
I have tried removing the battery, making sure there is a full charge and that everything is connected properly. The power button is lit up white and the WIFI button is blue.
Any advice would be greatly appreciated

Hello,
I see that you're having an issue booting the notebook up. You could be having an issue with Hard Drive in the notebook, Sometimes when the Hard Drive is bad it prevents the notebook from booting windows.
Try and test the Hard Drive in the BIOS. Follow this document and it should guide you through testing the Hard Drive and the memory.
Please let me know the outcome. If you have any more questions let me know.
THX

No audio output device is installed(code 10 error), in compaq presario v6000

Hi,
I have compaq presario v6608AU laptop with vista OS installed
I got a small red cross mark near the sound icon in the taskbar.
I read the forum and tried all possible ways to get back the sound but nothing worked.
when i switched on the bluetooth, it shows audio connected to bluetooth but no audio in laptop
In device manager i was not able to find any drivers for laptop audio but wireless audio is installed.
I tried downloading audio driver for my notebook but it doesnt get installed, saying no audio device found code 10 error
It would be a great help if some one would help me.
Thanks,

Hi,
Please follow the following link
http://support.microsoft.com/kb/2011656
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Bios Update Failed HP Compaq Presario V3000 Laptop

I have a HP Compaq Presario V3000 Laptop, and I tried to performed a HP Flash BIOS update, but the computer restarted during the update. After that the laptop starts but nothing happens, its a totally blank screen. I have tried removing the battery (Both the CMOS Clock batthery) aswell as the main battery, but the BIOS does not gets restored.
How can I undo the Flash BIOS update performed in my laptop, and restore it back to its orignal. Because I cannot interact with the laptop, as nothing happens. Would be appreciated, if anyone could help me on this.
Thanks

my laptop presario v3000 s.no. i want to bios recovry disk or file

Upgrading Compaq Presario V2000 laptop

hello everyone,
I am planning on upgrading a Compaq presario V2000 laptop i currently own. I heard that it cna can only run on PC2700 RAM with a max of 1gb per slot. Currently, I have 2 X 256mb sticks installed so i plan to remove one of them and install a 1GB stick and i was wondering whether this is compatible with the laptop:
http://www.shoppingsquare.com.au/p_3274_PNY_Sodimm_1GB_DDR333_PC_2700_for_Laptop
I also wanted to upgrade the hard-drive as 40gbs just doesn't cut it for me. Does anyone know whether the V2000 can hold two hard-drives? Also what hard-drives are supported by the V2000? Will any IDE 2.5" hard-drive fit in or does it only support 5400rpm drives?
Thank you,
Babaquazi

Your max memory is 2 gigs or 2 x 1 gb and yes it uses DDR333 SO-DIMM memory. Here is the Crucial.com page for it:
memory
Here is the Manual:
Manual
Turn to Page 5-6 for hard drive replacement. Don't forget to save the little connector piece that goes over the hard drive pins and place it on the new drive. There is only room for one (1) drive.
You can use any IDE (PATA) 2.5 inch laptop drive of any size and rotation speed. A 7200 rpm drive will boost performace significantly.
Not sure if you have the Intel or AMD version of the V2000 but the processor is also upgradeable if you happen to have one using the Celeron or Sempron processor.

Compaq Presario CQ62 laptop does not see SD card

I have a Compaq Presario CQ62 laptop (Windows 7 64bit) that has a built in media card reader that has never worked.
When I insert the SD card it makes the "USB Beep Up sound" that says it sees the card - but when I go to MY COMPUTER, there is no device listed for the SD card. How do I read and write to an SD card with this laptop?

I have done that.
In DEVICE MANAGER I can see the SD Card show up under "Disk Drives" when the SD card is inserted, and disappear when it is removed.
Under Storage>Disk Management the SD card shows up as drive 1 (main drive is drive 0) but no drive letter.
When I right-click on the SD card Drive 1 and try to change to a drive letter, I get an error message and it will not let me. It will not let me format either.
The driver is from microsoft and is old - 6/21/2006. I did some google searching and read that a driver update would fix the issue. I uninstalled the card reader driver, got a new driver from HP and installed it, and when I inserted the SD card it loaded up the old driver...ugh.

I need the manual for replacng the battery clock an old Compaq Presario 1247 laptop

Once upon a time I had a link to a document that showed how disassemble my Compaq Presario 1247 laptop to get to the clock battery. Can anyone provide the link to retrieve that manual?

Hi,
Please try this:
http://www.retrevo.com/support/HP-1247-Laptops-manual/id/610ag710/t/2/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problem with Compaq Presario V6000 laptop

Similar Messages

Maybe you are looking for