Problem with complex folder

Hi,
We have our EUL set up and working fine until last week. Today I received a call from the user saying that they are unable to open any workbooks, complaining that it has lost the joins.
Upon investigation found that, these workbooks are built upon a couple of complex folders and when looked into the EUL found that these Complex Folders are DISAPPEARED.
I know my database is in Archive Log mode and the EUL owner is in USERS tablespace. I do not know at what point these folders disappeared. And we do not have a back-up of the EUL.
Can somebody plz suggest how to restore the EUL schema from the tablespace.
Many Thanks
MK

Hi
Thanks for the reply.
Yes, I did check the EUL as EUL Owner and I do not see those folders.
Can you please explain me bit more how I can restore the EUL tables from back up. We have the database in Archive Log mode and I am not sure how often the database is backed up. Can we restore the tables from Archive Log files.
Awaiting your response.
Thanks Again.
MK

Similar Messages

Problem with "watch folder" and Windows 7

I have just switched to Windows 7 and Elements 9 - so far things are working quite well, but I am having a problem with "Watch folder" It is watching my odf folder "My Pictures" but all my new photos are going into Libraries/Pictures and PSE9 won't let me add that to the watch folder section. I am afraid that if I ask PSE9 to Get Photos and Videos / From Files and folders I may get a whole buch of duplicates in my Organizer.
Any help would be appreciated.

Thank you - I followed your directions
and found that I had already tagged it to watch, but hadn't realized that it was tagging both the old and the new. Big learning curve for me.

I had this problem with the folder with the question mark in it

hello guys, so i had this problem with the folder with the question mark in it and now i just keep the options button pressed till it shows me the option to boot and so how can i get that solved and my mac can just boot normally and something else is that i press on system preferences and nothing happens it basicly does not exist so if you guys could help me it would be great
<Re-Titled By Host>

It sounds like either the system on your disk drive is corrupt or the disk drive died.
Assuming the information in your profile is correct then boot from the install DVD for you MBP. From there you should be able to run Disk Utility to check out the disk drive.

Extremely annoying problem with user folder name in windows 8.1

Here is the thing:
Friend of mine bought the laptop (very strong and expensive asus - republic of gamers) with installed windows 8.1 on it, but after a few days only I bought that computer from him because he didn't need it and he didn't use it at all!
But, his name stayed in the windows. I changed all user accounts names and everything which was possible to be changed, but when i go to C/users his name is still there on folder!
I can say it is very annoying because that laptop cost almost 3.000 USD and I still need to look at someone else's name in my user folder!
I tried to change "ProfileImagePath" in: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ .... but after that windows logged in as a temporary profile and I spend another hour to figure out
how to reverse the thing!
How is possible that some so basic and simple things can't be changed at all in newest windows??? Only because some name was entered first it's not possible to be changed ever again???? Seriously?
Not only this problem, there is too many problems with this windows 8.1! Too many! You definitely made the worst thing ever!
I am extremely unhappy and upset with this operative system! I,m cursing the day when i gave so much money for computer with crap called windows 8.1!!!!
Very very angry!!!
(P.S English is not my native language)

Hi,
According to your description, it seems that you have resolve that issue.
Not only this problem, there is too many problems with this windows 8.1! Too many! You definitely made the worst thing ever!
Please let us know what problem did you encounter? Please give us more detailed information in order to provide the further help.
Here is a overall guide for you to know well the Windows 8.1
Windows 8.1: frequently asked questions
No Karen, I didn't resolve the issue.
I asked very simple question how to change something so basic like user folder name in Windows 8.1
You know: "C:/Users/"user name"
All the links you are giving to me doesn't provide any concrete answer to this question. I spent hours and hours googling and researching about this question and only solution which i found is that i need to create completely new user account and delete completely
the old one, just to be able to remove an old name of user folder! Are you kidding me?
How is possible that such a basic thing is so complicated?
Is there any way to change folder user name in any other way because i don't want to create a new user account!
Simple question, but, like always, no any concrete answers - just some empty talks, and totally useless links and SPINNING IN THE CIRCLE all the time without the CONCRETE solution.
As for part of my post which you quoted, and your request for more informations in order to provide me further help, i just gave it to you again. I want to change user folder name. What you don't understand in that question?
UPDATE:
Ok, i came back to edit this post because i have a feeling that maybe you don't understand the question and giving me this link because maybe you simply don't know that when you go to:
Control panel/user accounts/change your account name... and change the name, and after that, when you go to C:/users, the folder with the user name still have an old user name. Which means that any changes in control panel or anywhere else doesn't make any
changes on C:/users/ folder itself!!!!!
In previous windows versions was possible to change it by editing "ProfileImagePath" in:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ ....
But when I try to do that in Windows 8.1, when I reboot computer it logs in with some temporary account, so i need to reverse everything to be able to use computer with the real account!
So basically it seems that is absolutely impossible to change user folder name in Windows 8.1, which is simply unbelievable!
I really think i explained very good now.

Web service call problem with complex types input

We are trying to call a web service and pass as parameter
some complex types. When invoking the web service everything works
well on flex side, but on the server side the input parameters we
get from flex are not correct - complex type is removed and the
elements of the complex type are sent. See the example:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:WebService id="ws_id" wsdl="link" useProxy="false"
fault="wsFault(event)">
<mx:operation id="op_id" name="op"
result="wsResult(event)">
<mx:request>
<parameters>
<parameter1>{value1}</parameter1>
<parameter2>{value2}</parameter2>
<parameter3>{value3}</parameter3>
<parameter4>
<parameter4_1>{value4_1}</parameter4_1>
<parameter4_2>{value4_2}</parameter4_2>
<parameter4_3>{value4_3}</parameter4_3>
</parameter4>
</parameters>
</mx:request>
</mx:operation>
</mx:WebService>
</mx:Application>
on server side we get this:
<parameters>
<parameter1>{value1}</parameter1>
<parameter2>{value2}</parameter2>
<parameter3>{value3}</parameter3>
<parameter4_1>{value4_1}</parameter4_1>
<parameter4_2>{value4_2}</parameter4_2>
<parameter4_3>{value4_3}</parameter4_3>
</parameters>
Instead of :
<parameters>
<parameter1>{value1}</parameter1>
<parameter2>{value2}</parameter2>
<parameter3>{value3}</parameter3>
<parameter4>
<parameter4_1>{value4_1}</parameter4_1>
<parameter4_2>{value4_2}</parameter4_2>
<parameter4_3>{value4_3}</parameter4_3>
</parameter4>
</parameters>
Any idea how is it possible to send complex type as web
service input from flex ?

Hi,
I also have similar type of problem where I need to invoke a Web service with Complex input parameters.
I followed Susan's blog but I stuck at a point where methos getItem is created.
Can anyone tell me how to get that method for my requirement.
If possible can you guys share your solutions here.
Thanks in advance.

Problem with Watched Folder endpoint

Hi,
We have a problem with a watched folder endpoint. The watched folder is set in a directory in a linux server. The directory then is mapped to a windows directory where files arrive from time to time. Everything works fine until the watched folder service stops for no particular reason. After that we need to restart the service from the admin UI console.
I found in another post something related to the MySql database losing connection with livecycle after some inactivity, but I'm not sure if this is our case or even how to solve the problem.
Here's what we found in the log
2010-11-11 17:10:31,890 INFO [com.adobe.idp.dsc.provider.service.file.write.impl.FileResultHandlerImpl] FileResultHandlerImpl ----- preserved- source ----/data/livecycle/lc_wrk/edi/stage/Wx130df02e731a9c7b14738905/C0158_208.dat--- to ---/data/livecycle/lc_wrk/edi/preserve/ /C0158_208.dat
2010-11-11 20:39:46,366 INFO [com.adobe.idp.scheduler.jobstore.DSCJobStoreTX] Handling 1 trigger(s) that missed their scheduled fire-time.
2010-11-11 20:40:22,056 ERROR [com.adobe.idp.scheduler.jobstore.DSCJobStoreTX] Error retrieving job, setting trigger state to ERROR.
org.quartz.JobPersistenceException: Couldn't retrieve job: Prepared statement needs to be re-prepared [See nested exception: java.sql.SQLException: Prepared statement needs to be re-prepared]
at org.quartz.impl.jdbcjobstore.JobStoreSupport.retrieveJob(JobStoreSupport.java:1338)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.triggerFired(JobStoreSupport.java:2789)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$37.execute(JobStoreSupport.java:2757)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.executeInNonManagedTXLock(JobStoreSupport.ja va:3662)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.triggerFired(JobStoreSupport.java:2751)
at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:313)
Caused by: java.sql.SQLException: Prepared statement needs to be re-prepared
at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:2928)
at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1571)
at com.mysql.jdbc.ServerPreparedStatement.serverExecute(ServerPreparedStatement.java:1124)
at com.mysql.jdbc.ServerPreparedStatement.executeInternal(ServerPreparedStatement.java:676)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1030)
at org.jboss.resource.adapter.jdbc.CachedPreparedStatement.executeQuery(CachedPreparedStatem ent.java:90)
at org.jboss.resource.adapter.jdbc.WrappedPreparedStatement.executeQuery(WrappedPreparedStat ement.java:255)
at org.quartz.impl.jdbcjobstore.StdJDBCDelegate.selectJobListeners(StdJDBCDelegate.java:843)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.retrieveJob(JobStoreSupport.java:1319)
... 5 more
2010-11-11 20:40:22,061 ERROR [org.quartz.core.ErrorLogger] An error occured while firing trigger 'WatchedFolder.WatchedFolder:1107'
org.quartz.JobPersistenceException: Couldn't retrieve job: Prepared statement needs to be re-prepared [See nested exception: java.sql.SQLException: Prepared statement needs to be re-prepared]
at org.quartz.impl.jdbcjobstore.JobStoreSupport.retrieveJob(JobStoreSupport.java:1338)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.triggerFired(JobStoreSupport.java:2789)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$37.execute(JobStoreSupport.java:2757)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.executeInNonManagedTXLock(JobStoreSupport.ja va:3662)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.triggerFired(JobStoreSupport.java:2751)
at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:313)
Caused by: java.sql.SQLException: Prepared statement needs to be re-prepared
at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:2928)
at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1571)
at com.mysql.jdbc.ServerPreparedStatement.serverExecute(ServerPreparedStatement.java:1124)
at com.mysql.jdbc.ServerPreparedStatement.executeInternal(ServerPreparedStatement.java:676)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1030)
at org.jboss.resource.adapter.jdbc.CachedPreparedStatement.executeQuery(CachedPreparedStatem ent.java:90)
at org.jboss.resource.adapter.jdbc.WrappedPreparedStatement.executeQuery(WrappedPreparedStat ement.java:255)
at org.quartz.impl.jdbcjobstore.StdJDBCDelegate.selectJobListeners(StdJDBCDelegate.java:843)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.retrieveJob(JobStoreSupport.java:1319)
... 5 more
2010-11-11 20:56:46,550 INFO [com.adobe.idp.scheduler.jobstore.DSCJobStoreTX] Handling 1 trigger(s) that missed their scheduled fire-time.
thanks

Originally Posted by bjbradleyUSC
Is there a problem with running the ZCM client and the Endpoint client on the same machine?? I am having problems getting both of them to install on a single machine.
If I install the ZCM Client, it will pull down the policies and work correctly. Then I try to install Endpoint and it will not finish up it's checkin procedure and it will not get the policies set in place for it.
Otherwise, I'll start with Endpoint on a fresh machine install it and it works great pulling down the policies. But the ZCM doesn't seem to pull down the policies correctly?
Just wondering if this was known problem or is there something I am not doing correctly...
Thanks
BJ Bradley
This is issue that you are seeing is just for the client, correct? The ZESM server and ZCM server are on separate machines, correct?

Problem with public folder initialization on exchange load generator 2010

hi,
we need to make some stress charge for a migration between 2010 and 2013. Before that we need to populate our exchange 2010 lab with full mailbox and public folders. So we tried Exchange load generator 2010 for this task ( initialization only).
Loadgen did well for the mailbox but we have some problems with the public folders. we have an empty public folder database and the user we run loadgen with has organization admin and public folder management right. the problem is that when we run this command
(for initializing public folder only, mailbox's done) :
loadgencmd.exe /p /c config.xml /add trace.log
IT create only one public folder with the user we run loadgen with, and 5-8 objects inside. We need that It create a public folder for each users it created before. Maybe we do not understand loadgen
correctly...

I found my solution :
customize the <PublicStoreProfile> section in the configuration file as follows:
<PublicStoreProfile>
    <MessageFiles />
    <TopLevelFolderCount>1</TopLevelFolderCount>
    <NonTopLevelFolderCount>1</NonTopLevelFolderCount>
    <MinimumFolderDepth>1</MinimumFolderDepth>
    <AverageFolderDepth>2</AverageFolderDepth>
    <MaximumFolderDepth>3</MaximumFolderDepth>
    <MinimumMessageCount>5</MinimumMessageCount>
    <AverageMessageCount>10</AverageMessageCount>
    <MaximumMessageCount>15</MaximumMessageCount>
    <UseOrdinalFolderName>false</UseOrdinalFolderName>
</PublicStoreProfile>
Simply put differents values for each variables.

Problem with Complex Web Dynpro Webservice Model

Hi all,
in my Web Dynpro application I am using a Webservice which seems to be too complex for the Web Dynpro Model. I think I am getting the same kind of problems like:
HELP for WebDynpro web service model with complex structure
But I dont have a complex structure in my input parameters (like in this thread), <b>I have a complex structure in my output.</b>
This is the structure of my WSDL. I have a customer (KUNDE) which has an array of contracts (Vertrag).
<wsdl:types>
<schema targetNamespace="urn:Rentenkonto" xmlns="http://www.w3.org/2001/XMLSchema">
   <import namespace="http://schemas.xmlsoap.org/soap/encoding/"/>
   <complexType name="Vertrag">
    <sequence>
     <element name="aufschubfrist" type="xsd:int"/>
     <element name="brutto" type="xsd:double"/>
     <element name="eintrittsalter" type="xsd:int"/>
     <element name="endalter" type="xsd:int"/>
     <element name="laufzeit" type="xsd:int"/>
     <element name="renteKapital" type="xsd:double"/>
     <element name="rentenbeginn" nillable="true" type="xsd:dateTime"/>
     <element name="rentenbeginnAlter" type="xsd:int"/>
     <element name="versichererName" nillable="true" type="xsd:string"/>
     <element name="vertragsablauf" nillable="true" type="xsd:dateTime"/>
     <element name="vertragsartTx" nillable="true" type="xsd:string"/>
     <element name="vertragsbeginn" nillable="true" type="xsd:dateTime"/>
     <element name="vertragsnummer" nillable="true" type="xsd:string"/>
     <element name="zahlungsweise" nillable="true" type="xsd:string"/>
    </sequence>
   </complexType>
   <complexType name="ArrayOfVertrag">
    <complexContent>
     <restriction base="soapenc:Array">
      <attribute ref="soapenc:arrayType" wsdl:arrayType="impl:Vertrag[]"/>
     </restriction>
    </complexContent>
   </complexType>
   <complexType name="Kunde">
    <sequence>
     <element name="geburtsdatum" nillable="true" type="xsd:dateTime"/>
     <element name="kundenkennzeichen" nillable="true" type="xsd:string"/>
     <element name="pkNummer" nillable="true" type="xsd:string"/>
     <element name="vertraegeDcKapital" nillable="true" type="impl:ArrayOfVertrag"/>
     <element name="vertraegeDcRente" nillable="true" type="impl:ArrayOfVertrag"/>
     <element name="vertraegeDv" nillable="true" type="impl:ArrayOfVertrag"/>
     <element name="vertraegePk" nillable="true" type="impl:ArrayOfVertrag"/>
     <element name="vertraegeRdv" nillable="true" type="impl:ArrayOfVertrag"/>
    </sequence>
   </complexType>
</schema>
</wsdl:types>
When I execute the Webservice basically I get an empty response. I think this is because the WSModel isnt fully mapped to the WS proxy. This should be done via coding.
Can someone give me some hints on this?
Kind regards
Christoph

Hi Christoph,
First test the webservice itself. Maybe it is required to give some input parameter in the request and then get some output parameters in the Response. But therefore you should test the webservice yourself and take a look.
Give more detail about ur case.
Greetings, Sandhya

The problem with Complex Job Manager in Business Connector.

Hi,
I have a problem with the service "Complex Job Manager" in Business Connector.
Sometimes this service hangs and a minus value (such as -83452 sec) appears in the column "Next run".
What can I improve?
I have BC ver. 4.7 with CoreFix 9, Java ver. 1.3.1 (46.0), system AIX.
Please help me.
Thanks,
Robert

Sorry, Raja.
I saw many questions about Business Connector in this category (Process Integration) and I thought that is a right place for my question.
In your opinion, where is a better place for my question?
Regards,
Robert

Problem with complex predicates

Hi,
i'm trying to create a complex predicate to query for some tasks.
I have 2 predicates, and i'm trying to create a complex one with the following code:
complexPred = new Predicate(pred1, Predicate.AND, pred2);
I have no problems when querying for tasks with either pred1 or pred2, but when executing the query with complexPred, i get a null pointer exception.
I realised that complexPred has an empty clause list. Am I missing something when creating the complex predicate?
Thanks in advanced

Thanks for the example, but i have the same problem running it as I exposed in my previous post.
When I reach this point in the code...
Predicate predicate = null;
if ( predicateSearch == null ) {
predicate = predicateBasic;
} else {
predicate = new Predicate (predicateBasic,Predicate.AND,predicateSearch);
...both predicateSearch and predicateBasic have content, and when they are combined into predicate, this new variable predicate has an empty clause list (predicate.getPredicateClauseList() is an empty ArrayList, while predicateSearch.getPredicateClauseList() and predicateBasic.getPredicateClauseList() have both content)
The rest of the components of the variable predicate (tables, values...) seems to be ok and a result of the combination of predicateBasic and predicateSearch
This is part of the log I get:
<*::*> <displayColumn xmlns="http://xmlns.oracle.com/bpel/workflow/taskQuery">urlAttribute1</displayColumn>
<*::*> <displayColumn xmlns="http://xmlns.oracle.com/bpel/workflow/taskQuery">urlAttribute2</displayColumn>
<*::*> </displayColumnList>
<*::*> <optionalInfoList xmlns="http://xmlns.oracle.com/bpel/workflow/taskQuery">
<*::*> <taskOptionalInfo xmlns="http://xmlns.oracle.com/bpel/workflow/taskQuery">Actions</taskOptionalInfo>
<*::*> </optionalInfoList>
<*::*> <predicate xmlns="http://xmlns.oracle.com/bpel/workflow/taskQuery">
<*::*> <assignmentFilter xmlns="http://xmlns.oracle.com/bpel/workflow/taskQuery">My+Group</assignmentFilter>
<*::*> </predicate>
<*::*> <ordering xmlns="http://xmlns.oracle.com/bpel/workflow/taskQuery">
<*::*> <clause xmlns="http://xmlns.oracle.com/bpel/workflow/taskQuery">
<*::*> <col
As you can see after assigmentFilter, the label predicate is closed, and is missing a label clause with all the clauseList information
Thanks in advanced,
Cris
Edited by: user7352348 on 07-nov-2011 23:47

Problem with junk folder showing up when I don't want it and have set to not have it

Just updated Thunderbird. Have settings set to NOT create junk folder, but a junk folder keeps showing up with emails in it (that are not junk!). Also, and even worse, there is no notification that there are new emails in the junk folder- I have to click on the folder to check for emails in that folder. I have disabled all setting related to junk. We use thunderbird at work and everybody who has recently updated has this problem. Obviously, it is a bug in the new update. Help!!!

Does your anti virus program filter spam or junk mail? does your mail provider? are these accounts IMAP or POP?

Problem with voucher folder.

I have got a problem, when I download a book, adobe digital editions show an error. http://img5.imgup.eu/Untitled-1.png

Hello,
I have also accents in my name.
I actually have this original path
C:\Documents and Settings\Frédéric ALLIER\Application Data\Macromedia\Flash Player\www.macromedia.com\bin\digitaleditions2x0
And created this one
C:\Documents and Settings\Fred ALLIER\Macromedia\Flash Player\www.macromedia.com\bin\digitaleditions2x0
to test the software i use a "test docuement" link present on the BLL web site
http://www.bl.uk/sed
I have a shortcut for Digital edition on my desktop and, there in the propeeties I changed the path to the Fred ALLIER path.
I deleted the MACROMEDIA folder from the Frédéric ALLIER folder but the Frédéric ALLIERR folder is still there (with other under-folders).
I still have the error message
I can't change the "read olny status of the digitaleditions2x0
folder, it systemetically comes back ton read only.
Any idea.?
Thanks for any help.

Windows 7 pro problem with redirected folder for 1 computer in the domain only.

Hi.
We have a computer in the domain we have that started to behave strangely.
We have redirected folder on the GPO for the Desktop, favorites, and my documents folder.
The server is 2012 essentials
Sometimes the customer want to save it's document and the computer refuse to save the file saying that the folder doesn't exist (path unknow). Mostly restarting the machine solve the problem.I verified the synchro between the server and the computer and
everything seem fine. What I have seen is that went I unplug the system from local network this specific folder disapear. So what I fear is that somethimes the machine can't connect to the server and then the problem start to appear.
I have tested other account on the domain and they run fine.
Any idea where I might look?
Thanks you.

Hi MD Info,
Do you mean that only one account have this issue?
What policy do you set?
Please take the following steps for troubleshooting:
1. Use this account to log in other computers and check if this issue still exists
2. When this issue occurs, ping the IP address and server name of the server 2012, and share us the result
3. As you mentioned in the post ‘Mostly restarting the machine solve the problem’, please run the command
gpupdate /force in powershell and check if this issue still exists.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Problem with empty folder showing up in incorrect release folder

Thanks to several forum contributors I've got conditional build expressions working correctly to create five Single Source Layouts. To keep it simple, I'll use letters for the SSLs.
SSL
Build Tag
Available Tags in Conditional Build Tag Expression
A (the Core Help)
A
A
B (licensed module)
B
B + A
C (licensed module)
C
C + A
D (licensed module)
D
D + A
E (licensed module)
E
E + A
As you can see, all the licensed modules can access topics in the Core Help, but cannot access topics in any module that they have not licensed.
There are no untagged topics in the Help.
When I generate the Help for the licensed modules, RoboHelp creates an empty folder in each target Release folder that is related to one of those licensed modules. For example, the B, C, D, and E Release folders ALL contain an empty E folder.
I have gone through the project with a fine-tooth comb, verifying that the tags are correctly applied, checking images and baggage files, etc. But that empty E folder continues to appear.
Any thoughts about the next step that I might want to take to clean this up?
Thanks.
Carol

HI Carol
Are you using Inclusive or Exclusive build expression?
Sounds like it's Inclusive, but thought I'd ask.
If so, you might try using Exclusive. Just clear tags with anything related to A. After all, it's included by default anyway, no? As an aside, if the folder is empty, not really seeing the concern. Just curiosity?
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Problem with complex dataBinding within concat

Im trying to create a link with a databound onClick attribute like so:
<link ....>
<boundAttribute name="onClick">
<concat>
<fixed text="submitForm('result',0,{'event':'action','action':'"/>
<dataObject select="defaultAction" source="fti:search"/>
<dataObject select="##','index':'%index%'});return false;" source="resultRow@fti:search"/>
</concat>
</boundAttribute>
</link>
fti:search is a dataObject that returns another dataObject for the selectString resultRow. The resultRow dataObject should then be called with the selectString ="##','index':'%index%'});return false;
However the resultRow dataObject is never called with that selecString.
I also tried writing:
<fixed data:text="##','index':'%index%'});return false;@resultRow@fti:search"/>
but with the same result.
I'm using this syntax for many other controls, but for the text attribute of a <fixed> element it doesn't seem to work.
So how can I do a complex dataBinding within a <concat> element?
Thanks,
Guido

Hi Guido
I think you need this
<dataObject select="##,'index':'%index%});return false;" data:source="resultRow@fti:search"/>Cheers
Ian

Problem with complex folder

Similar Messages

Maybe you are looking for