Problem with Config Agent

Hello together,
I have noticed that I can only distribute configuration parameter with my agent when I distribute an application at the same time. Can I distribute only configuration parameters to my devices? Perhaps exists a parameter for this behavior in DOE?
Greetings
Waldemar

Hi Waldemar,
Have you tried assigning Agents to your device through the "Manage Agents" link of your device, as suggested by Rohith?
Please note that the parameters of "standard" agents "CONFIG", "TRACE" are the only once that are "consumable" by the client because there is a semantic/logic defined within the client to handle these parameters. Are you trying to assign agent parameters other than "CONFIG" / "TRACE"? This may not work.
If you are assigning the "right" agent parameters and still think that they haven't reached the client, then the only reason could be that either your device's "SAP BASIS" SWCV is still NOT operational and hence the "AGENT_CONFIG" messages are not reaching the outbound queue. Please verify this.
Ensure that before registering your client with the device in DOE, you should have uploaded the same version of NWMCLIENT.SCA file in the DOE as that of your client. Otherwise, the SAP BASIS SWCV doesn't get "operational".
Please verify both of the above and let me know if my suggestions helped.
Best Regards,
Kranti

Similar Messages

Problem with the agent console created in the ESSO-Logon Manager 64 bits

Friends,
When I use the installer that I created in the console ESSO-Logon Manager for 32-bit, this I install it on the client side and when I synchronize with the console-Logon Manager ESSO brings me and I can see the agent all the templates I configured.
I have a problem with the agent console created in the Logon Manager ESSO-64bit.
When I use this installer on the client stations and then by the agent does not envision the applications that I have configured in the console.
This causes you can not do single sign on to applications that I have configured in the client stations
To generate this installer use the source name: ESSO-LMx64.msi
Can someone please help me with this problem, this only happens when I use the msi installer on 64-bit client stations.
Thanks.

Jackson_Bill wrote:
What IDE are you using and what platform?Read first.
Moh Bob wrote:
I'm using J2ME platform SDK 3.0
db

How to complain to Apple about this company and how to get a formally answer for problem with Apple agent in Kuwait??

How to complain to Apple about this company and how to get a formally answer for problem with Apple agent in Kuwait??

You did not buy your iphone from an Apple store. No Apple employee sold you anything.
Your complaint is not with Apple. You bought from an unauthorized seller. Your complain is with that seller.
As you have been told more than once, Apple has nothing to do with this.

Problem with config sync between two CSM-S modules

Hi everybody,
I have a problem with config sync between two CSM-S modules.
I am using CSM-S software version 2.1(8).
The acitve module is used in a 6509 with WS-SUP720-BASE supervisor running software version 12.2(18)SXF12a.
The standby module is used in a 6509-V with VS-S720-10G supervisor (no VSS setup) running software version 12.2(33)SXI3.
Failover seems to work fine:
switch-active#sh modu csm 2 ft
FT group 1, vlan 398
This box is active
Configuration is out-of-sync
priority 150, heartbeat 3, failover 40, preemption is on
switch-standby# sh modu csm 2 ft
FT group 1, vlan 398
This box is in standby state
Configuration is out-of-sync
priority 80, heartbeat 3, failover 40, preemption is on
The command (on active side) "hw-module contentSwitchingModule 2 standby config-sync" leads to following result:
switch-active:
2010-04-14T16:21:45+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56042: Apr 14 16:21:44.223: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Bulk sync started
2010-04-14T16:21:45+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56043: Apr 14 16:21:44.251: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configurations to Standby CSM, this may take several minutes!
2010-04-14T16:21:46+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56044: Apr 14 16:21:45.995: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:21:51+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56045: Apr 14 16:21:50.831: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:21:57+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56046: Apr 14 16:21:56.151: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56047: Apr 14 16:22:58.791: %CSM_SLB-3-REDUNDANCY: Module 2 FT error: Active: Manual bulk sync timed out
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56048: Apr 14 16:22:58.803: %CSM_SLB-3-REDUNDANCY: Module 2 FT error:
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56049: FT CONFIG SYNC: Failed config sync entity send
switch-standby:
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2475: Apr 14 16:21:44.232: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Bulk sync started
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2476:
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2477: Apr 14 16:21:44.240: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: STANDBY:Configuration is being received, This may take several minutes!
2010-04-14T16:21:49+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2478: Apr 14 16:21:48.824: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Receiving configuration from Active CSM
2010-04-14T16:21:54+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2479: Apr 14 16:21:53.964: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Receiving configuration from Active CSM
2010-04-14T16:21:59+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2480: Apr 14 16:21:58.852: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Started clearing configuration
2010-04-14T16:21:59+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2481: Apr 14 16:21:59.400: %CSM_SLB-4-REDUNDANCY_WARN: Module 2 FT warning: Standby: Config Sync does not save running-config to startup-config
2010-04-14T16:22:00+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2482: Apr 14 16:21:59.400: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Previous configuration are being deleted from supervisor
The last log message on standby device seems to be correct - there is no CSM configuration after the attempted config sync.
Our configuration includes about 3500 lines and it is really uncomfortable to keep in sync manually.
Maybe someone has the same problem?
kind regards,
Christoph

Hi Christoph,
I am running into the exact same issue. Upon further investigation I've discovered that this is a known bug, CSCtd09117. You can read more about it here: http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtd09117 . Apparently this is fixed in ver 12.2(32.8.11)SX323 .
I haven't had a chance to upgrade yet, so I can't verify the fix, but if it works for you please let me know.
Regards,
Brandon

Problem with the Agent

Following a problem I had with saving to a shared location on windows nt using RMAN. (see note 145843.1 in metalink, also see bottom of this text)
When I got to the stage of assigning the service to the domain administrator the agent failed. Can anyone shed any light on the situation on to why it is doing whats its doing.
Thanks to all
Note 145843.1
Doc ID: Note:145843.1 Type: BULLETIN
Last Revision Date: 21-OCT-2005 Status: PUBLISHED
PURPOSE
Following are step-by-step instructions for configuring RMAN to write
to mapped (shared/networked) drive(s) on Windows NT, 2000 or 2003.
SCOPE & APPLICATION
RMAN users who are familiar with basic RMAN functionality
as well as database configuration on the Windows Platform.
WRITING FILES TO A MAPPED DRIVE WITH RMAN
The problem of backing up to a mapped network drive using the SYSTEM account
is a security issue. By default, Oracle requires the SYSTEM user to have
privileges to write to the drives. Microsoft considers granting SYSTEM owned
service access to a shared drive a security issue.
However, there is a workaround that allows Oracle to access a shared drive.
The Oracle services are originally configured to log on using the SYSTEM
account. The SYSTEM account should not be granted access to the shared drive,
therefore the Oracle services for the TARGET DB need to be reconfigured to
logon using an Administrator account (preferably a Domain Administrator).
THE STEPS NEEDED TO RESOLVE THIS ISSUE
1. On the machine where you wish to write the files to, create a shared drive
granting the user 'Administrator' FULL Control.
Note: For reference below, this Administrator will use the password 'test',
this will be referred to as the "Destination" machine.
2. On the machine with the TARGET DB, verify the Administrator user has the
same password of the user that shared the drive on the destination machine.
In the example here, the password would be 'test'.
3. Map a network drive on the TARGET machine to the shared drive on the
destination machine. When mapping this drive, use the Administrator
user with the password 'test'.
4. On the TARGET machine, BOTH the OracleTNSListener Service and the
OracleService<SID> services must be configured to start using the
Administrator/test account.
(As discussed above, Oracle uses the Local System account by default.)
a. Go to the Control Panel and then open up the Services panel.
b. Double click on the appropriate service
(TNSListener or OracleService<SID>).
c. Change the "Log on as" user from the "Local System Account" to
ShowDoc https://metalink.oracle.com/metalink/plsql/f?p=130:14:176254058330...
2 of 3 12/06/2008 08:48
"This Account".
d. Specify the service to log on as the Administrator user.
c. Click on "OK".
5. Shutdown the TARGET database and stop and start the services on the Target
machine. Restart the TARGET database.
6. You should now be able to use RMAN from the Catalog machine to copy the
datafiles. In the RMAN script, specify the drive letter that you mapped
in step 3.
Special Windows 2003 Update :
As Windows 2003 has a changed access behavior compared to Windows 2000,
the solution is a little restrict :
Don't use local drive letters for mapping network shares.
Workaround is to use UNC locations directly, e.g. backup to \\B\share
Since this is in fact an absolute location this is always the same for any
node in the network.
So whether accessed from node A or node B, \\B\share is always the shared
location on B.
FINAL NOTES
It is recommended to use the Domain Administrator account to ensure that
passwords are the same across the various machines. If there is no domain,
use the local Administrator account and ensure that the passwords are the same
for this account across all of the machines.
If your backups are to be automated using the AT command, it is best to start
up the SCHEDULE service under the same Administrator account that the
OracleService<SID> and the OracleTNSListener services use.
In the event that you HAVE to use a user account for the Oracle Services,
rather then using the SYSTEM account, you can create a batch file that
reconnects the shared drives at system startup. The batch file runs
automatically as a service when the server starts and would establish the
connection to the shared drives, regardless of which user logs into the
system. This process of creating the batch file is outlined in the Microsoft's
Knowledgebase article Q243486 - "How to Run a Batch File Before Logging on
to Your Computer." The batch file is not supported by Oracle and is only
mentioned here as an alternative way to reconnect the shared drives.
COMMON MISTAKES
If the OracleService<SID> and OracleTNSListener services are not configured
to use the same account as the shared drive, you can expect the following
errors:
RMAN-10035: exception raised in RPC: ORA-19504: failed to create file
"<file name>"
ORA-27040: skgfrcre: create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 5) Access is denied.
ORA-19600: input file is datafile 1(<path and file name of Datafile 1>)
ORA-19601: output file is datafile-copy 0(<path and file name of file
to be created>)
RMAN-10031: ORA-19624 occurred during call to
DBMS_BACKUP_RESTORE.COPYDATAFILE
If the mapped drive is created on the CATALOG machine and NOT on the TARGET
machine, you can expect the following errors.
RMAN-10035: exception raised in RPC: ORA-19504: failed to create file
"<file name>"
ORA-27040: skgfrcre: create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
ORA-19600: input file is datafile 1 (<path and file name of Datafile 1>)
ORA-19601: output file is datafile-copy 0 (<path and file name of file to
be created>)
RMAN-10031: ORA-19624 occurred during call to
DBMS_BACKUP_RESTORE.COPYDATAFILE

If there's more information required, Please do not hesitate to send a post. I check this post Daily.

Problems with config nodemanage SSL setings weblogic10.3

Hi,
I am new to build weblogic cluster. But I got some problems when I build it.
I tried to build a simple architecture as a demo to understand the cluster.
I have two PCs with XP
PC1 and PC2
I defined machine0 to PC1 and machine1 to PC2 in the weblogic.
pc1 IP:192.168.1.102
pc2 IP:192.168.1.103
I created a domain on the PC1 testDomain
I created a admin server and one node on the PC1(machine0):testAdmin, testNode1
I created another node on the PC2(machine1):testNode2
Cluter: testCluster, testNode1, testNode2 added
Cluster Address:192.168.1.102
I launch the nodeManager menully.
I wanted to start testNode1 in the admin console(web page)
It's seems working, I can see the status changed to "RUNNING". But I got the message in the console
Invalid/unknown SSL header was received from peer localhost - 127.0.0.1 during SSL handshake
It seems there is something wrong with the SSL handshanke, this message will appeared when I enter the
testDomain->Environment->Server page in the admin console.
I launched the nodeManager with the SecureListener=false
and the setting in the testAdmin, testNode1, testNode2 is SSL Listen Port Enabled UNCHECKED
keystores setting is "Dome identity and Demo Trust"
In the machine0 the node manger tab Type is Plain.
My question is:
1. I didn't setting the SSL why the server will use SSL to communitate each othe.
2. If I want to use Nodemanager to control the node server, is the SSL must be setting?
3. What cause the message I got, is between nodemanager and testAdmin or testAdmin and testNode1? Is there any way to solve it?
4. I found weblogic tool utils.CertGen can generate SSL certificates, how to use it to recreate the DemoIdentity.jks and DemoTrust.jks, is it possible?
My operations are all focus on the PC1 I believe the SSL setting is the cause, please give me some advise.
Thanks

Make sure you restart the nodemanger service or script when you make changes to the nodemananger.properties file. They don't usually pick up on the fly. Previous post was correct in that the errors are probably within the cert. Turn off SSL and test and it will confirm. If still getting issues turn off the hostname verifier on the admin server (on keystore page or SSL under the admin server config).

Problems with Config Tool; ADS not running

Hello everyone,
I'm trying to create an Interactive Form, but I get the following error
com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (404) Not Found.
I assume that Adobe Document Services is not running. I typed http://localhost:50000/AdobeDocumentServices/config in my browser. The result was an Error 404, too.
In a documentation sheet about administration of ADS, I found that service IIOP in the config tool should be set to startup mode "always".
When I tried to apply the changes in the config tool, it terminated with a critical error. Logfile says the following:
Error occurred while working with Configuration.
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: ,
     at com.sap.engine.core.configuration.impl.persistence.rdbms.UpdateProcessor.flush(UpdateProcessor.java:294)
     at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.commitConfigurationHandler(ConfigurationCache.java:1217)
     at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.commit(ConfigurationHandlerImpl.java:833)
     at com.sap.engine.configtool.batch.task.TaskUtil.changeProperties(TaskUtil.java:335)
     at com.sap.engine.configtool.batch.task.ChangeServicePropsTask.go(ChangeServicePropsTask.java:64)
     at com.sap.engine.configtool.batch.task.TasksThread.run(TasksThread.java:46)
Caused by: com.sap.dbtech.jdbc.exceptions.BatchUpdateExceptionSapDB: [-3018]: Invalid numeric parameter(input position 2)
     at com.sap.dbtech.jdbc.CallableStatementSapDB.executeBatch(CallableStatementSapDB.java:649)
     at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1102)
     at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1066)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBAccessDefault.execInsertEntryBatch(DBAccessDefault.java:1170)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.UpdateProcessor.flush(UpdateProcessor.java:257)
     ... 5 more
What can I do about the two problems?

Just for the sake of learning how to use the tool i start with drawing a rectangle then click and drag the gradient tool across the box. i see the gradient line appear but when i release the mouse the gradient line disappears
i end up witha box with a gradient but all my editing has to be done in the gradient box as shown in this screen shot:
What I'm wanting to achieve is how the lades hat is edited in this video Working with gradients | Visual Design CS4 | Adobe TV

Oracle on Redhat 5.2 - Problem with Intelligent Agent

After installing Oracle 8.0.5 with Redhat 5.2 Linux,
the Intellient Agent would not work?
Did anybody have similar problems?
thank you
Petra
null

Hello Jay,
I have changed the read/write permissions and it now looks like this
ls -ll
drwxrwxrwx 4 oracle dba 4096 Jul 30 18:20 11g
drwxrwxrwx 3 oracle dba 4096 Jul 30 00:35 linux_11gR1_database_1013.zip_FILES
drwxrwxrwx 2 oracle dba 4096 Jul 30 18:31 oraInventory
As you can see now that the dump linux_11gR1_database_1013.zip_FILES which i have downloaded from oracle website is owned by user oracle and oraInventory as well could you please tell me what error it could be...
Thanks a lot
Edited by: msyed on Jul 30, 2009 6:38 PM

Installation problems with SAPCCM4X Agent

Hi!
I would like to install a SAPCCM4x agent on windows and have two problems.
By one of the systems when i execute the commando for the installation sapccm4x -R pf=...
I get the following error message:
ERROR: Cannot open Monitoring Segment 0 rtc = 245
Last reported error: 249 CCMS monitoring segment has wrong EYE CATCH: CCMS monitoring segment belongs to a non-ABAP
SAPCCM4X of release 7.00 is to be used only to monitor ABAP instances of kernel release 7.00 (NW04s) or 6.40.
By the second system I can install the SAPCCM4X agent, but the agent is stopped after 3 seconds.
I have looked into the log files I do not detect any problems.
Can some one help to solve the problems ?
Thank you very much!
regards
Thom

Hi,
I could install XE in my (physical) machine with FC4 without any particular issue (just had to add some swap space); I also had to remove reference to ORACLE* environment variables prior to install the rpm (the rpm install warned me about both of the issues)
I just miss the menu icons that are correctly installed in suse: did you manage to have them?
Regards,
Andrea

Big problem with ARD agent and versions.

This is going to be a bit lengthy so please bear with me. At my company I'm in charge of our 6 production G5 computers. My boss has permitted me to install ARD on them so that I can run the specialty programs we have on one without having to walk all the way across the department time and time again. The computers are from varying times in terms of processor speed and RAM but they are all running the same OS with all the same updates. All were running the ARD 3.0 Agent as it was in an update from apple not too long ago. I have uninstalled the agent and used a custom client install pack from ARD 2.2.
My computer is a dual 2GHz G5 and is the oldest of the 6. (here on referred to as Mac2) The other computer with problems is a dual 2.5GHz G5 and is called Mac7.
Mac2 is supposed to have the admin program on it, and I can install it but the program fails to start because it was either installed wrong or the computer needs a restart. I had this same error on my laptop at home but that is a MBP which is Intel. To solve the problem on intel computers i've been told to remove the remote-management folder from core-services and let ARD reinstall it on launch. This has not worked for the G5 at work. Furthermore at one point i could get control of Mac2 remotely from another computer, but after trying to reinstall the admin program again I cannot do that anymore. Even if i reset all ARD software and use the custom client install .pkg again.
As for Mac7, that computer was being run with the 3.0 agent on it and i could connect fine but couldn't lock the screen because of the mismatch. I did the exact same uninstall and reinstall of the ARD Agent that I did on the other computers and now I can't access that one either.
At the very least I need to be able to control these two computers, and I would like to have the Admin software work on Mac2 if possible. I see no reason why these problems should be occurring.
All systems are running 10.4.10 and have no third party remote software installed on them. On both Mac2 and 7 the ARD menu drop-down is showing as not active. All sharing preferences have been set right and there is no firewall. All accounts on both computers have been given all the rights possible for control.
If anyone has any advice please reply to this.

OK, I am still a bit confused - Mac2 is your computer, the one on which you want run the admin app to control other computers, correct? If ARD 2.2 will not start on that one, does it give an error message? I really suspect there are traces of 3.x agent causing the trouble, as I have had this problem myself. In essence, if you have version 2.2 admin, there is no reason to have 3.x agent for any reason whatsoever, it will just cause problems both on the admin and client side since Apple completely rewrote the way it works.
And, based on the first paragraph of your initial inquiry, I wonder if ARD is worth the trouble anyway, since it seems you could accomplish what you need with a simple VNC viewer (my up and coming favorite is JollysFastVNC). If you can't connect with a simple VNC viewer, you also won't be able to use ARD, as it's an extension of the VNC protocol.
However, if you want to make this work, let's work on Mac2 - follow the instructions at this page, down at the bottom: http://docs.info.apple.com/article.html?artnum=108021
It says: "Mac OS X 10.2 clients" but it's also the correct procedure for a complete and clean removal in 10.3 and 10.4
Then reinstall ARD 2.2 admin (you may have an earlier version installer, then install the admin updater). Don't mess with your custom client installer stuff. Just install the 2.2 admin app, and it will install the client it needs. I think this will make Mac2 work for you.

JAAS problem with config file

hello,
my scenario
EJB application, with JCA and JAAS.
My problem is, that I'm not able to read the config file. where i have to copy the .conf file that my application find that file.
System.setProperty("java.security.auth.login.config", "demo.conf");
kind regards
Johannes

Hello!
I've done the following tasks:
Searched for jazn-data.xml file of OC4J-installation.
Added information of jaas.conf-file to a new entry of application.
e.g.
TestJaas { com.sun.security.auth.module.Krb5LoginModule required debug=false useTicketCache=false; };
<application>
<name>TestJaas</name>
<login-modules>
<login-module>
<class>com.sun.security.auth.module.Krb5LoginModule</class>
<control-flag>required</control-flag>
<options>
<option>
<name>debug</name>
<value>false</value>
<name>useTicketCache</name>
<value>false</value>
</option>
</options>
</login-module>
</login-modules>
</application>
It should work.
regards
Harald.

[SOLVED] a problem with gpg-agent and ssh keys

I'm baffled by a strangle problem:
My setup is as follows: I use gpg-agent with --enable-ssh-support, so that my ssh keys are handled by it. All was fine (when I ssh'ed to another machine, a pinentry window popped up, asked for a password, and if I entered the correct one, gpg-agent would decrypt its copy of my private ssh key and use it for identification). But: I needed to change my ssh key, and so I generated a new one. Next, I ssh-add'ed it to gpg-agent (one password to decrypt the private key, then twice another password for gpg-agent). I uploaded the public key to a server. The setup should be complete.
The problem is that when I ssh to a machine, a pinentry window comes up, but it does not accept my password (the one that I entered twice when ssh-add'ing the key). I tried adding with various different passwords (always deleting ~/.gnupg/private-keys-v1.d/*, since 'ssh-add -d ~/.ssh/id_rsa.pub' would not work for some reason - it would not make gpg-agent forget the key), different pinentry programs ( -qt4, -gtk-2, -curses), and still the same problems. Pinentry itself seems to work fine, since if I enter two different things when it asks for a new passphrase for the key, it detects that there's a problem.
So, can anyone help? What could I try (please don't post just to say that I could/should use ssh-agent, or keychain, or anything else. I have used various things, and I like this setup the most. It worked before, and I would like to find out why it stopped working and how to get it back to speed.)
Thanks.
Last edited by bender02 (2010-02-15 09:52:54)

Thats a known bug with the new gpg version.
http://lists.gnupg.org/pipermail/gnupg- … 38045.html
You could use an older version of gpg or use a development version.

Problem With Policy Agent 2.2 for APACHE on WINDOWS !!!!

I have been getting a nasty error for weeks configuring PolicyAgent 2.2 for Apache (tried 2.2.x and 2.0.x) on a Windows Server. After the configuring apache could not even start. I get the following error :
Syntax error on line 1 of "C:/Sun/Access_Manager/Agents/2.2/apache/config/apache_80/dsame.conf":
Cannot load C:/Sun/Access_Manager/Agents/2.2/apache/bin/libamapc2.dll into server. The specified module does not exist
Does anyone have any ideas? (I have been pulling my hair off trying to resolve this and I am about to lift up the server and drop it !!! ) The dll file above is available in that path.
Message was edited by:
lreju

This dll file may need/depend other dlls. So sometimes you may still get this error after you download the dll into your windows system folder. But you can use a tool such as http://www.dependencywalker.com to find out which other dlls are needed for your installation....Hope this helps someone !!!

Problem with Grid agent

Hi,
I installed Grid control on Instance A and grid agent at Instance B where im able to monitor Instance B from Grid control ,but when i tried to install another grid agent an say Instance C during installtion when i gave the INstance C details its not connecting with INstance C when i tried to ping from Instance A(where i installed Grid control) im able to ping from A--->B
Please help me in to solve this issue
Regards,
Pradeee

Whats exactly the error it throw

Problem with config of new install

Hello,
I just installed VO 1.61 on a NW65SP5 box. I got the config screen ok,
and selected the "Typical" install which ended as follows:
Schema was successfully upgraded.
The following error occurred with the portal object in the directory:
javax.naming.NameNotFoundException::[LDAP: error code 32 - NDS error: no
such entry (-601)]
The following portal modules were installed:
Administration Module
Community Services Module
Forgotten Password Module
Virtual Office Module
Now, if I try to go to http://server/vo I just get a page with the above
information.
In the KB it says that the error is due to using invalid characters in
the LDAP name, but what name was it and how do I fix it? How do I
reconfigure or otherwise correct this?
Your help appreciated.
Cheers,
Ken

After rebooting the server, I now get:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented
it from fulfilling this request.
exception
javax.servlet.ServletException: Missing setting: System.GUID
at com.novell.vo.configManager.ConfigManager.init(Con figManager.java:392)
at com.novell.vo.PortalServlet.init(PortalServlet.jav a:262)
at
org.apache.catalina.core.StandardWrapper.loadServl et(StandardWrapper.java:888)
at
org.apache.catalina.core.StandardWrapper.allocate( StandardWrapper.java:621)
at
org.apache.catalina.core.StandardWrapperValve.invo ke(StandardWrapperValve.java:163)
at
org.apache.catalina.core.StandardPipeline$Standard PipelineValveContext.invokeNext(StandardPipeline.j ava:596)
at
org.apache.catalina.core.StandardPipeline.invoke(S tandardPipeline.java:433)
at org.apache.catalina.core.ContainerBase.invoke(Cont ainerBase.java:948)
at
org.apache.catalina.core.StandardContextValve.invo ke(StandardContextValve.java:144)
at
org.apache.catalina.core.StandardPipeline$Standard PipelineValveContext.invokeNext(StandardPipeline.j ava:596)
at
org.apache.catalina.authenticator.AuthenticatorBas e.invoke(AuthenticatorBase.java:504)
at
org.apache.catalina.core.StandardPipeline$Standard PipelineValveContext.invokeNext(StandardPipeline.j ava:594)
at
org.apache.catalina.core.StandardPipeline.invoke(S tandardPipeline.java:433)
at org.apache.catalina.core.ContainerBase.invoke(Cont ainerBase.java:948)
at
org.apache.catalina.core.StandardContext.invoke(St andardContext.java:2358)
at
org.apache.catalina.core.StandardHostValve.invoke( StandardHostValve.java:133)
at
org.apache.catalina.core.StandardPipeline$Standard PipelineValveContext.invokeNext(StandardPipeline.j ava:596)
at
org.apache.catalina.valves.ErrorDispatcherValve.in voke(ErrorDispatcherValve.java:118)
at
org.apache.catalina.core.StandardPipeline$Standard PipelineValveContext.invokeNext(StandardPipeline.j ava:594)
at
org.apache.catalina.valves.ErrorReportValve.invoke (ErrorReportValve.java:116)
at
org.apache.catalina.core.StandardPipeline$Standard PipelineValveContext.invokeNext(StandardPipeline.j ava:594)
at
org.apache.catalina.core.StandardPipeline.invoke(S tandardPipeline.java:433)
at org.apache.catalina.core.ContainerBase.invoke(Cont ainerBase.java:948)
at
org.apache.catalina.core.StandardEngineValve.invok e(StandardEngineValve.java:127)
at
org.apache.catalina.core.StandardPipeline$Standard PipelineValveContext.invokeNext(StandardPipeline.j ava:596)
at
org.apache.catalina.core.StandardPipeline.invoke(S tandardPipeline.java:433)
at org.apache.catalina.core.ContainerBase.invoke(Cont ainerBase.java:948)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(Co yoteAdapter.java:152)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyo teHandler.java:300)
at org.apache.jk.common.HandlerRequest.invoke(Handler Request.java:374)
at org.apache.jk.common.ChannelSocket.invoke(ChannelS ocket.java:743)
at
org.apache.jk.common.ChannelSocket.processConnecti on(ChannelSocket.java:675)
at org.apache.jk.common.SocketConnection.runIt(Channe lSocket.java:866)
at
org.apache.tomcat.util.threads.ThreadPool$ControlR unnable.run(ThreadPool.java:683)
at java.lang.Thread.run(Thread.java:534)
Ken McLeod wrote:
> Hello,
>
> I just installed VO 1.61 on a NW65SP5 box. I got the config screen ok,
> and selected the "Typical" install which ended as follows:
>
> Schema was successfully upgraded.
> The following error occurred with the portal object in the directory:
> javax.naming.NameNotFoundException::[LDAP: error code 32 - NDS error: no
> such entry (-601)]
> The following portal modules were installed:
> Administration Module
> Community Services Module
> Forgotten Password Module
> Virtual Office Module
>
> Now, if I try to go to http://server/vo I just get a page with the above
> information.
>
> In the KB it says that the error is due to using invalid characters in
> the LDAP name, but what name was it and how do I fix it? How do I
> reconfigure or otherwise correct this?
>
> Your help appreciated.
>
> Cheers,
> Ken

Problem with Config Agent

Similar Messages

Maybe you are looking for