Problem with ./config
I'm currently following
this
tutorial to set up Alchemy. I got to the step where it says to
enter ./config, and at this point I get the output:
quote:
Add "source /home/Nicholas/ALCHEMY_HOME/alchemy-setup to your
login script.
"alc-home" takes you to the Alchemy install folder.
"alc-on" puts Alchemy gcc toolchain replacements at the
front of your path.
"alc-off" restores original path.
"alc-util" shows you various Alchemy-related environment
vars
You need Flash 10 or AIR 1.5 and the Flex 3.2 SDK installed
for testing.
Nothing past that point in the tutorial seems to do anything.
What should I do now? Please be as specific as possible; I am using
Cygwin and I just installed it today, thus I am not the least bit
familiar with it.
Of course I hope that you have installed the package - -
Alchemy Toolkit
for Cygwin on Windows
Edited
Then you have to run cygwin shell -> it will create a
directory and several files and - .bashrc, in the /home / Nicholas
Open this file, and added to it strings.See my example:
my CYGWIN setup in drive - C: \. But my virtual drive - C: \
will be so->
/cygdrive/c/
my ALCHEMY installed in C: \alchemy directory
But the virtual path will be /cygdrive/c/alchemy/
my FlexSDK installed in C:\flex directory
But the virtual path will be /cygdrive/c/flex/bin
Then, I simply added into file - . bashrc next path
Example:
source /cygdrive/c/alchemy/alchemy-setup
PATH = ALCHEMY_HOME /achacks:/cygdrive/c/flex/bin:$PATH
export PATH
And after the restart, all should work fine.But....-if you
install correct CYGWIN!!!
Importantly!
Do not forget! during the installation CYGWIN to install
these additions - zip, perl,gcc.Using only - setup.exe
added:
Then follow the instructions- Step13:
http://labs.adobe.com/wiki/index.php/Alchemy:Documentation:Getting_Started#Windows
Perhaps if do you see an
java.lang.UnsupportedClassVersionError... Unsupported
major.minor version 49.0' error
Please - Install The Latest Java JDK
Similar Messages
-
Problem with config sync between two CSM-S modules
Hi everybody,
I have a problem with config sync between two CSM-S modules.
I am using CSM-S software version 2.1(8).
The acitve module is used in a 6509 with WS-SUP720-BASE supervisor running software version 12.2(18)SXF12a.
The standby module is used in a 6509-V with VS-S720-10G supervisor (no VSS setup) running software version 12.2(33)SXI3.
Failover seems to work fine:
switch-active#sh modu csm 2 ft
FT group 1, vlan 398
This box is active
Configuration is out-of-sync
priority 150, heartbeat 3, failover 40, preemption is on
switch-standby# sh modu csm 2 ft
FT group 1, vlan 398
This box is in standby state
Configuration is out-of-sync
priority 80, heartbeat 3, failover 40, preemption is on
The command (on active side) "hw-module contentSwitchingModule 2 standby config-sync" leads to following result:
switch-active:
2010-04-14T16:21:45+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56042: Apr 14 16:21:44.223: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Bulk sync started
2010-04-14T16:21:45+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56043: Apr 14 16:21:44.251: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configurations to Standby CSM, this may take several minutes!
2010-04-14T16:21:46+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56044: Apr 14 16:21:45.995: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:21:51+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56045: Apr 14 16:21:50.831: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:21:57+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56046: Apr 14 16:21:56.151: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56047: Apr 14 16:22:58.791: %CSM_SLB-3-REDUNDANCY: Module 2 FT error: Active: Manual bulk sync timed out
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56048: Apr 14 16:22:58.803: %CSM_SLB-3-REDUNDANCY: Module 2 FT error:
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56049: FT CONFIG SYNC: Failed config sync entity send
switch-standby:
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2475: Apr 14 16:21:44.232: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Bulk sync started
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2476:
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2477: Apr 14 16:21:44.240: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: STANDBY:Configuration is being received, This may take several minutes!
2010-04-14T16:21:49+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2478: Apr 14 16:21:48.824: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Receiving configuration from Active CSM
2010-04-14T16:21:54+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2479: Apr 14 16:21:53.964: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Receiving configuration from Active CSM
2010-04-14T16:21:59+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2480: Apr 14 16:21:58.852: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Started clearing configuration
2010-04-14T16:21:59+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2481: Apr 14 16:21:59.400: %CSM_SLB-4-REDUNDANCY_WARN: Module 2 FT warning: Standby: Config Sync does not save running-config to startup-config
2010-04-14T16:22:00+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2482: Apr 14 16:21:59.400: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Previous configuration are being deleted from supervisor
The last log message on standby device seems to be correct - there is no CSM configuration after the attempted config sync.
Our configuration includes about 3500 lines and it is really uncomfortable to keep in sync manually.
Maybe someone has the same problem?
kind regards,
ChristophHi Christoph,
I am running into the exact same issue. Upon further investigation I've discovered that this is a known bug, CSCtd09117. You can read more about it here: http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtd09117 . Apparently this is fixed in ver 12.2(32.8.11)SX323 .
I haven't had a chance to upgrade yet, so I can't verify the fix, but if it works for you please let me know.
Regards,
Brandon -
Problems with config nodemanage SSL setings weblogic10.3
Hi,
I am new to build weblogic cluster. But I got some problems when I build it.
I tried to build a simple architecture as a demo to understand the cluster.
I have two PCs with XP
PC1 and PC2
I defined machine0 to PC1 and machine1 to PC2 in the weblogic.
pc1 IP:192.168.1.102
pc2 IP:192.168.1.103
I created a domain on the PC1 testDomain
I created a admin server and one node on the PC1(machine0):testAdmin, testNode1
I created another node on the PC2(machine1):testNode2
Cluter: testCluster, testNode1, testNode2 added
Cluster Address:192.168.1.102
I launch the nodeManager menully.
I wanted to start testNode1 in the admin console(web page)
It's seems working, I can see the status changed to "RUNNING". But I got the message in the console
Invalid/unknown SSL header was received from peer localhost - 127.0.0.1 during SSL handshake
It seems there is something wrong with the SSL handshanke, this message will appeared when I enter the
testDomain->Environment->Server page in the admin console.
I launched the nodeManager with the SecureListener=false
and the setting in the testAdmin, testNode1, testNode2 is SSL Listen Port Enabled UNCHECKED
keystores setting is "Dome identity and Demo Trust"
In the machine0 the node manger tab Type is Plain.
My question is:
1. I didn't setting the SSL why the server will use SSL to communitate each othe.
2. If I want to use Nodemanager to control the node server, is the SSL must be setting?
3. What cause the message I got, is between nodemanager and testAdmin or testAdmin and testNode1? Is there any way to solve it?
4. I found weblogic tool utils.CertGen can generate SSL certificates, how to use it to recreate the DemoIdentity.jks and DemoTrust.jks, is it possible?
My operations are all focus on the PC1 I believe the SSL setting is the cause, please give me some advise.
ThanksMake sure you restart the nodemanger service or script when you make changes to the nodemananger.properties file. They don't usually pick up on the fly. Previous post was correct in that the errors are probably within the cert. Turn off SSL and test and it will confirm. If still getting issues turn off the hostname verifier on the admin server (on keystore page or SSL under the admin server config).
-
Problems with Config Tool; ADS not running
Hello everyone,
I'm trying to create an Interactive Form, but I get the following error
com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (404) Not Found.
I assume that Adobe Document Services is not running. I typed http://localhost:50000/AdobeDocumentServices/config in my browser. The result was an Error 404, too.
In a documentation sheet about administration of ADS, I found that service IIOP in the config tool should be set to startup mode "always".
When I tried to apply the changes in the config tool, it terminated with a critical error. Logfile says the following:
Error occurred while working with Configuration.
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: ,
at com.sap.engine.core.configuration.impl.persistence.rdbms.UpdateProcessor.flush(UpdateProcessor.java:294)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.commitConfigurationHandler(ConfigurationCache.java:1217)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.commit(ConfigurationHandlerImpl.java:833)
at com.sap.engine.configtool.batch.task.TaskUtil.changeProperties(TaskUtil.java:335)
at com.sap.engine.configtool.batch.task.ChangeServicePropsTask.go(ChangeServicePropsTask.java:64)
at com.sap.engine.configtool.batch.task.TasksThread.run(TasksThread.java:46)
Caused by: com.sap.dbtech.jdbc.exceptions.BatchUpdateExceptionSapDB: [-3018]: Invalid numeric parameter(input position 2)
at com.sap.dbtech.jdbc.CallableStatementSapDB.executeBatch(CallableStatementSapDB.java:649)
at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1102)
at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1066)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBAccessDefault.execInsertEntryBatch(DBAccessDefault.java:1170)
at com.sap.engine.core.configuration.impl.persistence.rdbms.UpdateProcessor.flush(UpdateProcessor.java:257)
... 5 more
What can I do about the two problems?Just for the sake of learning how to use the tool i start with drawing a rectangle then click and drag the gradient tool across the box. i see the gradient line appear but when i release the mouse the gradient line disappears
i end up witha box with a gradient but all my editing has to be done in the gradient box as shown in this screen shot:
What I'm wanting to achieve is how the lades hat is edited in this video Working with gradients | Visual Design CS4 | Adobe TV -
hello,
my scenario
EJB application, with JCA and JAAS.
My problem is, that I'm not able to read the config file. where i have to copy the .conf file that my application find that file.
System.setProperty("java.security.auth.login.config", "demo.conf");
kind regards
JohannesHello!
I've done the following tasks:
Searched for jazn-data.xml file of OC4J-installation.
Added information of jaas.conf-file to a new entry of application.
e.g.
TestJaas { com.sun.security.auth.module.Krb5LoginModule required debug=false useTicketCache=false; };
<application>
<name>TestJaas</name>
<login-modules>
<login-module>
<class>com.sun.security.auth.module.Krb5LoginModule</class>
<control-flag>required</control-flag>
<options>
<option>
<name>debug</name>
<value>false</value>
<name>useTicketCache</name>
<value>false</value>
</option>
</options>
</login-module>
</login-modules>
</application>
It should work.
regards
Harald. -
Hello together,
I have noticed that I can only distribute configuration parameter with my agent when I distribute an application at the same time. Can I distribute only configuration parameters to my devices? Perhaps exists a parameter for this behavior in DOE?
Greetings
WaldemarHi Waldemar,
Have you tried assigning Agents to your device through the "Manage Agents" link of your device, as suggested by Rohith?
Please note that the parameters of "standard" agents "CONFIG", "TRACE" are the only once that are "consumable" by the client because there is a semantic/logic defined within the client to handle these parameters. Are you trying to assign agent parameters other than "CONFIG" / "TRACE"? This may not work.
If you are assigning the "right" agent parameters and still think that they haven't reached the client, then the only reason could be that either your device's "SAP BASIS" SWCV is still NOT operational and hence the "AGENT_CONFIG" messages are not reaching the outbound queue. Please verify this.
Ensure that before registering your client with the device in DOE, you should have uploaded the same version of NWMCLIENT.SCA file in the DOE as that of your client. Otherwise, the SAP BASIS SWCV doesn't get "operational".
Please verify both of the above and let me know if my suggestions helped.
Best Regards,
Kranti -
Problem with config of new install
Hello,
I just installed VO 1.61 on a NW65SP5 box. I got the config screen ok,
and selected the "Typical" install which ended as follows:
Schema was successfully upgraded.
The following error occurred with the portal object in the directory:
javax.naming.NameNotFoundException::[LDAP: error code 32 - NDS error: no
such entry (-601)]
The following portal modules were installed:
Administration Module
Community Services Module
Forgotten Password Module
Virtual Office Module
Now, if I try to go to http://server/vo I just get a page with the above
information.
In the KB it says that the error is due to using invalid characters in
the LDAP name, but what name was it and how do I fix it? How do I
reconfigure or otherwise correct this?
Your help appreciated.
Cheers,
KenAfter rebooting the server, I now get:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented
it from fulfilling this request.
exception
javax.servlet.ServletException: Missing setting: System.GUID
at com.novell.vo.configManager.ConfigManager.init(Con figManager.java:392)
at com.novell.vo.PortalServlet.init(PortalServlet.jav a:262)
at
org.apache.catalina.core.StandardWrapper.loadServl et(StandardWrapper.java:888)
at
org.apache.catalina.core.StandardWrapper.allocate( StandardWrapper.java:621)
at
org.apache.catalina.core.StandardWrapperValve.invo ke(StandardWrapperValve.java:163)
at
org.apache.catalina.core.StandardPipeline$Standard PipelineValveContext.invokeNext(StandardPipeline.j ava:596)
at
org.apache.catalina.core.StandardPipeline.invoke(S tandardPipeline.java:433)
at org.apache.catalina.core.ContainerBase.invoke(Cont ainerBase.java:948)
at
org.apache.catalina.core.StandardContextValve.invo ke(StandardContextValve.java:144)
at
org.apache.catalina.core.StandardPipeline$Standard PipelineValveContext.invokeNext(StandardPipeline.j ava:596)
at
org.apache.catalina.authenticator.AuthenticatorBas e.invoke(AuthenticatorBase.java:504)
at
org.apache.catalina.core.StandardPipeline$Standard PipelineValveContext.invokeNext(StandardPipeline.j ava:594)
at
org.apache.catalina.core.StandardPipeline.invoke(S tandardPipeline.java:433)
at org.apache.catalina.core.ContainerBase.invoke(Cont ainerBase.java:948)
at
org.apache.catalina.core.StandardContext.invoke(St andardContext.java:2358)
at
org.apache.catalina.core.StandardHostValve.invoke( StandardHostValve.java:133)
at
org.apache.catalina.core.StandardPipeline$Standard PipelineValveContext.invokeNext(StandardPipeline.j ava:596)
at
org.apache.catalina.valves.ErrorDispatcherValve.in voke(ErrorDispatcherValve.java:118)
at
org.apache.catalina.core.StandardPipeline$Standard PipelineValveContext.invokeNext(StandardPipeline.j ava:594)
at
org.apache.catalina.valves.ErrorReportValve.invoke (ErrorReportValve.java:116)
at
org.apache.catalina.core.StandardPipeline$Standard PipelineValveContext.invokeNext(StandardPipeline.j ava:594)
at
org.apache.catalina.core.StandardPipeline.invoke(S tandardPipeline.java:433)
at org.apache.catalina.core.ContainerBase.invoke(Cont ainerBase.java:948)
at
org.apache.catalina.core.StandardEngineValve.invok e(StandardEngineValve.java:127)
at
org.apache.catalina.core.StandardPipeline$Standard PipelineValveContext.invokeNext(StandardPipeline.j ava:596)
at
org.apache.catalina.core.StandardPipeline.invoke(S tandardPipeline.java:433)
at org.apache.catalina.core.ContainerBase.invoke(Cont ainerBase.java:948)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(Co yoteAdapter.java:152)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyo teHandler.java:300)
at org.apache.jk.common.HandlerRequest.invoke(Handler Request.java:374)
at org.apache.jk.common.ChannelSocket.invoke(ChannelS ocket.java:743)
at
org.apache.jk.common.ChannelSocket.processConnecti on(ChannelSocket.java:675)
at org.apache.jk.common.SocketConnection.runIt(Channe lSocket.java:866)
at
org.apache.tomcat.util.threads.ThreadPool$ControlR unnable.run(ThreadPool.java:683)
at java.lang.Thread.run(Thread.java:534)
Ken McLeod wrote:
> Hello,
>
> I just installed VO 1.61 on a NW65SP5 box. I got the config screen ok,
> and selected the "Typical" install which ended as follows:
>
> Schema was successfully upgraded.
> The following error occurred with the portal object in the directory:
> javax.naming.NameNotFoundException::[LDAP: error code 32 - NDS error: no
> such entry (-601)]
> The following portal modules were installed:
> Administration Module
> Community Services Module
> Forgotten Password Module
> Virtual Office Module
>
> Now, if I try to go to http://server/vo I just get a page with the above
> information.
>
> In the KB it says that the error is due to using invalid characters in
> the LDAP name, but what name was it and how do I fix it? How do I
> reconfigure or otherwise correct this?
>
> Your help appreciated.
>
> Cheers,
> Ken -
I have changed the server name from dev to test in config file, it worked fine but when I try to change it back to dev it reflect the change. Package still executes fro test configuration. What could be the problem. I have reloaded the package many times
also.
Thanks,
sreeWhat I have noticed is that when I create a new config for a package and edit the server name, it is reflecting only once. Next time it is not changing.
Let me explain how I configured my package
-created a variable called servername and on configuration manager I have edited the expression to map property:Servername to the variable I have created .
-Next under configuration manager I have selected the value of variable which I'm editing by opening the config file in notepad
I'm I doing it right?
sree -
Problem with config.txt size 32kb
Hi, Some body can help-me about how can I store the file config.txt on Cisco aironet AP1231g when the size of this file is more than 32kb (ex: 45kb long)?, the size of the NVRAM is 32KB.
After I have had a error message of buffer size, i was send BOOT BUFFERSIZE 80000, it solved the error, but the file was not stored in NVRAM because of the size limit of 32KB.Have you tried
d:\\mydir\\myconfig.txt ?? -
Problems with Config.xml in weblogic 6.1 sp2
I?ve got a web application that runs under weblogic 6.1 sp1 but it doesn?t work under weblogic 6.1 sp2. It seems that the problem is that i?ve got 3 libraries (jdom.jar, xerces.jar,xalam.jar) in the lib directory under WEB-INF directory.
Can anybody help me?
Thanks in advanceHi
Can you send the error you are getting.
Send the Stack Trace if you are getting any.
What version of xerces are inluding the web application
Ajay
Agustin <[email protected]> wrote in message
news:3d2c743d$[email protected]..
I?ve got a web application that runs under weblogic 6.1 sp1 but it doesn?twork under weblogic 6.1 sp2. It seems that the problem is that i?ve got 3
libraries (jdom.jar, xerces.jar,xalam.jar) in the lib directory under
WEB-INF directory.
Can anybody help me?
Thanks in advance -
Problem with ASA 5505 VPN config
Hi to all,
I have a problem with ASA 5505 remote access vpn. I have site-to-site VPN and I need that my VPN clients can access IP subnets that I have behind site-to-site VPN. All that I have tried I get and error to my log “Flow is a loopback”.
So what I need : for example I need that vpn client with ip 10.0.0.1 can go to 192.168.1.2
My config:
access-list Test_splitTunnelAcl standard permit host 10.0.2.3
access-list Test_splitTunnelAcl standard permit host 10.0.2.4
access-list Test_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list nonat_outside extended permit ip 10.0.0.0 255.255.255.0 192.168.1.0 255.255.255.0
ip local pool VPN_Client_Pool2 10.0.0.1-10.0.0.200 mask 255.255.255.0
nat (outside) 0 access-list nonat_outside
nat (outside) 1 10.0.0.0 255.255.255.0
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Test_splitTunnelAcl
Site-to-Site:
crypto map outside_map 3 set peer 195.233.x.x
access-list outside_3_cryptomap extended permit ip object-group DM_INLINE_NETWORK_2 object-group DM_INLINE_NETWORK_4
object-group network DM_INLINE_NETWORK_2
network-object 10.0.2.0 255.255.255.0
network-object 10.0.3.0 255.255.255.0
object-group network DM_INLINE_NETWORK_4
network-object host 192.168.2.70
network-object host 192.168.3.55
network-object 192.168.1.0 255.255.255.0
I hope that someone can post an answer and solve my problemA few things are required:
1) You don't need the following 2 lines, so it can be removed:
nat (outside) 0 access-list nonat_outside
nat (outside) 1 10.0.0.0 255.255.255.0
2) On the ASA, you need to configure:
same-security-traffic permit intra-interface
3) Object group: DM_INLINE_NETWORK_2 needs to include 10.0.0.0/24
4) On the remote lan-to-lan end, the crypto ACL also needs to include 10.0.0.0/24 as the destination subnet.
5) The NAT exemption (NONAT) on the remote lan-to-lan end also needs to include 10.0.0.0/24 as the destination subnet.
Hope that will resolve your problem. -
Itunes cannot run because it detected a problem with your audio config.
I keep coming up with this message. I feel like I have tried everything. Uninstalling---reinstalling---installing earlier versions---even tried apple's help page regarding this error. Nothing seems to work. Anyone have any ideas?
I have exactly the same problem. Everytime I try to open itunes it shows the dialog "itunes has detected a problem with your audio config..." and then when it "opens"
has no background, so it's impossible to do something. I've tried to reinstall itunes and quicktime in different ways like both of them separately and following every instruction in Apple's Web site like article #304424. I've installed prior versions for those programs too and the problem persist, tried to clean up the registry, etc. I don't want to reinstall Windows to solve this issue 'cause it seems to be only way to get rid of this! =( HELP!!! -
Hi all,
I have a problem with my TMS config.
When I adjust the transport queue, the "No system found in another group for import queue QAS" message appears.
My landscape includes a DEV-QAS and a PRD systems.
can somebody help me?
thanks in advance.Hello,
I have the same problem. I just forund the alert from RZ20. When we are doing transport and checking RFC connections from SM59, seems to be all working fine. So I am not sure where this alert is coming from.
Command TMS_MGR_READ_TRANSPORT_QUEUE
Service Transport Service
Start Online
Function TMS_MGR_TRANSMIT_TR_QUEUE
Message TRANSMIT_QUEUE_FAILED
No system found in another group for import queue <SID>
I run into this thread but there is no information on how the problem got resolved. Please let me know if you have any ideas.
Regards,
Tony -
Build shared problem with configure / config.guess
Hi,
I'm constructing some 3rd party libraries from source level with configure/automake in Suse 9.2. A common mistake in all libs is done by config.guess: it prints out "i686-pc-linux-gnuaout" which switch off the shared support at all. It's easy to workaround by print "i686-pc-linux" instead directly from configure:
ac_config_guess="echo i686-pc-linux"
Then the shared support is enabled and there left some minor problems with linker options -soname and --rpath. Then some libs can create the shared libs, for instance the apr and xml2.
Others do not, for instance log4cxx and acetao, but they do not produce any error. It looks like that simply the shared link step is not done, however the symbolic links to the release version are done. I also tryed with LD=CC and LD=cc instead of the gnu ld, but then already in config.log the shared support is not recognized. If I build by hand:
cc -shared *.o -o libACE.so
it seems to work and the result usable by applications. Since acatao includes lots of libraries to build, the manual creation is not handy / possible. So any hint to solving that are welcome. I'm using the latest sunstudio version (feb2007).
thanx rolfIt really depends on autoconf/libtool version those libs are using.
Till the most recent versions libtool had absolutely no clue that SunStudio exists on Linux. And default fallback happened to be gcc.
If you give me some specific lib (source URL or name/version) I can tell you why this lib does not configure with Sun Studio :)
Most recent version of autoconf is wize enough to handle Sun Studio on Linux. So one of the solutions for the libs might be to upgrade to a newer autoconf. Not what common user would commonly do though...
regards,
__Fedor. -
Problem with the config.xml
Dear all,
After doing a wscompile on the config.xml file (JWSDP1.6), I am able to generate the wsdl for the interface defined.
But now the config.xml shows an error
"Cannot find the declaration of element 'configuration' "
for the attribute xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config"
Any idea what is the problem as "http://java.sun.com/xml/ns/jax-rpc/ri/config" is no longer available on the sun site.
Any alternate references to be made to this xml namespace declaration.
Rgds,
SeeteshMy point above is that Project 2007 was extremely buggy and unless files are saved using Project 2007 SP3 first you are likely to experience problems with the files when opening in project 2010. Project 2007 to 2010 with no service packs is problematic.
With SPs applied you should have far fewer problems.
Doesn't look like a exe with SP2 is available yet so you need to add the service pack separately, probably in the updates folder.
If all Project 2007 installs are already at SP3 then no need for this.
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz -
Problem with reading config file
Hello,
I have problem with reading config file from the same dir as class is. Situation is:
I have servlet which working with DB, and in confing file (config.pirms) are all info about connection (drivers, users, passw, etc.). Everything work fine if I hardcoded like:
configFileName = "C:\\config.pirms";I need to avoid such hardcoding, I tryied to use:
configFileName = Pirms.class.getClassLoader().getResourceAsStream ("/prj/config.pirms").toString();but it isn't work.
My config file is in the same directory as Pirms.class (C:\apache-tomcat-5.5.17\webapps\ROOT\WEB-INF\classes\prj)
Also I tryied BundledResources, it isn't work fo me also.
Can anybody help me to solve this problem? with any examples or other stuff?
Thanks in advance.
AndrewThanks, but I am getting error that "non-static method getServletConfig() cannot be referenced from a static context"
Maybe is it possibility to use <init-param> into web.xml file like:
<init-param>
<param-name>configFile</param-name>
<param-value>/prj/config.pirms</param-value>
</init-param>If yes can anybody explain how to do that?
I need to have that file for:
FileReader readFile = new FileReader(configFile);Thanks in advance.
Maybe you are looking for
-
found no related post for my question which I find hard to believe no one else has questioned; after installing AIO_CDB_Net_Full_Win_WW_130_141 (1).exe driver I have lost automatic duplex printing fro my hp 7310 all in one. Another problem there is n
-
Hi, I've been trying to connect to a MySQL database from Java. I have no problems from PHP so the db is fine, but suspect this is a driver issue. I was using the Netbeans IDE but have now switched to a basic texteditor and command line to try underst
-
I can't (within actionscript 3) determine where the mouse is relative to the flash player window. I can get stage.mouseX and stage.mouseY but those coordinates are in relation to the size of the entire ORIGINAL stage at compile time. I need to know w
-
Portal Backing file -- ClassNotFoundException
I am using weblogic8.1 SP3. I try to give a backing file for .portal desktop. I put this backing file, PortalBacking.java in the portal project root directory which is the same directory as .portal file. And give PortalBacking.java in Backing File pr
-
How to run your form in IE instead of firefox
Dear all, I have Oracle database10g and oracle forms 10g in my personal PC , the plate form it's windows xp after i install firefox the form builder execute it's forms in firefox, my question could some help me to turn it back to internet explorer re