Problem with configuration settings.

I have a Nokia 3110 classic .Recently I had a problem with Personal Configuration settings .
When I want to add new App types it displays "Cannot add new account.Memory Full."
So I also cannot be able to save Configuration settings as it displays"Only 70 sets allowed.Settings discarded".
So please help me.
Solved!
Go to Solution.

A workaround is available on internet, Not on this forum. But i am afraid i am not allowed to post it here.
Try to Google this keyword " Only 70 sets allowed.Settings discarded"
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

Similar Messages

  • Problem with configuration of wifi newtork- dhcp

    hi.
    i've got a small problem with configuration of wi-fi network.
    i use dhcp network.
    there are some errors about network during boot up (but its to fast for my to write it down)
    after log-in i have to setup network access by typing
    iwconfig eth2 essid SpeedTouchBCE72F
    and then i heve to run this command
    dhclient
    and after that i've got an access to internet
    this is my rc.file
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="pl_PL.UTF-8"
    HARDWARECLOCK="localtime"
    TIMEZONE="Europe/London"
    KEYMAP="-u pl2"
    CONSOLEFONT="lat2-16.psfu.gz"
    USECOLOR="yes"
    LC_ALL="pl_PL.UTF-8"
    LESSCHARSET="UTF-8"
    # HARDWARE
    # Scan hardware and load required modules at bootup
    MOD_AUTOLOAD="yes"
    # Module Blacklist - modules in this list will never be loaded by udev
    MOD_BLACKLIST=()
    # Modules to load at boot-up (in this order)
    #   - prefix a module with a ! to blacklist it
    MODULES=()
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    HOSTNAME="linugrat"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
    # interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    #   - prefix an entry in INTERFACES with a ! to disable it
    #   - no hyphens in your interface names - Bash doesn't like it
    # Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
    lo="lo 127.0.0.1"
    eth2="dhcp"
    INTERFACES=(lo eth2)
    ROUTES=(!gateway)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    #   - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.0.1"
    ROUTES=(gateway)
    # Enable these network profiles at boot-up.  These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    #   - set to 'menu' to present a menu during boot-up (dialog package required)
    #   - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network-profiles
    #NET_PROFILES=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    #   - prefix a daemon with a ! to disable it
    #   - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng ipw3945d network netfs crond)
    # End of file
    szymon

    Hi Mariano
    I think you need to <b>restart your portal Engine</b> after making correct settings.
    Also please refer to the link below to get a better insight:-
    http://help.sap.com/saphelp_nw04s/helpdata/en/0b/719a425ffac46ae10000000a155106/frameset.htm
    Regards
    Navneet

  • Problem with Mail settings - PDF document is not sending

    Hi Experts,
    During sales order confirmation, a PDF attachment used to be sent.
    But now the customer is receiving the file with extension as .OTF instead of .PDF.
    Where could be the problem with this? Is this something wrong in SOCT setttings?
    But for some other scenarios, the same is working so i don't think that there is a problem with SCOT settings.
    Please let me know if anybody has an idea about this problem or susgestion to find the problem
    Regards,
    Vijay

    Hi Gangisetty,
    I guess there is no need to change any settings.
    You just need to change format from OTF to PDF using some FM.
    You can refer following links for conversion of OTF to PDF.
    Re: sending INVOICE as attachment in PDF for  external Mail address
    FM to send an email with a PDF attachment
    http://an-abaper.blogspot.com/2009/07/sending-smartform-as-pdf-through-mail.html
    Hope this will help you.
    Regards,
    Vivek

  • TS3899 iPad mail account says problem with 'ssl settings' - can you help me?

    iPad mail account says problem with 'ssl settings' - can you help me?

    The 4Gs hardware, only 256 MB of RAM, prohibits updating beyond 6.1.6.
    Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
    App Store: Downloading Older Versions of Apps on iOS - Apple Club
    App Store: Install the latest compatible version of an app
    You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

  • Problem with configuring the application in websphere

    Hi,
    We have taken the back up of war file which was working and have deployed the same,We are using websphere as the application server due to some problem with the configuration we are getting the following error when we are trying to run the application.
    Could any one please suggest on the same.
    [7/22/08 5:04:30:766 EDT] 9f0473c WebGroup E SRVE0026E: [Servlet Error]-[GAServlet]: java.lang.NoClassDefFoundError: Error while defining class: com.xxrx.ga.al.GAServlet
    This error indicates that the class: com.objectframe.servlet.OFServlet
    could not be located while defining the class: com.xxrx.ga.al.GAServlet
    This is often caused by having the class at a higher point in the classloader hierarchy
    Dumping the current context classloader hierarchy:
    ==> indicates defining classloader
    *** indicates classloader where the missing class could have been found
    ==>[0]
    com.ibm.ws.classloader.CompoundClassLoader@1fec073f
    Local ClassPath: C:\Documents and Settings\XG\Desktop\MyWorkspace\XG_Pilot\WebContent\WEB-INF\classes;C:\Documents and Settings\XG\Desktop\MyWorkspace\activation1;C:\Documents and Settings\XG\Desktop\MyWorkspace\classes121;C:\Documents and Settings\XG\Desktop\MyWorkspace\CLIENT-GDDRel40-QA.71;C:\Documents and Settings\XG\Desktop\MyWorkspace\cos1;C:\Documents and Settings\XG\Desktop\MyWorkspace\ejs1;C:\Documents and Settings\XG\Desktop\MyWorkspace\fscontext1;C:\Documents and Settings\XG\Desktop\MyWorkspace\jfoundations1;C:\Documents and Settings\XG\Desktop\MyWorkspace\JRAPI-GDDRel40-QA.71;C:\Documents and Settings\XG\Desktop\MyWorkspace\LOADER-GDDRel40-QA.71;C:\Documents and Settings\XG\Desktop\MyWorkspace\log4j1;C:\Documents and Settings\XG\Desktop\MyWorkspace\mail1;C:\Documents and Settings\XG\Desktop\MyWorkspace\MAILER-GDDRel40-QA.71;C:\Documents and Settings\XG\Desktop\MyWorkspace\mvcf-1.0.21;C:\Documents and Settings\XG\Desktop\MyWorkspace\providerutil1;C:\Documents and Settings\XG\Desktop\MyWorkspace\REPORT-GDDRel40-QA.71;C:\Documents and Settings\XG\Desktop\MyWorkspace\XG_Pilot\WebContent;
    Delegation Mode: PARENT_FIRST
    [1] com.ibm.ws.classloader.JarClassLoader@531728191 Local Classpath: Delegation mode: PARENT_FIRST
    [2] com.ibm.ws.classloader.ExtJarClassLoader@1932756796 Local ClassPath: E:\XIP\IBM\WebSphere Studio\Application Developer IE\v5.1\runtimes\ee_v51\lib\app; Delegation Mode: PARENT_LAST
    [3] com.ibm.ws.classloader.ProtectionClassLoader@723a473c
    [4] com.ibm.ws.bootstrap.ExtClassLoader@3822873d
    [5] sun.misc.Launcher$AppClassLoader@383fc73d
    [6] sun.misc.Launcher$ExtClassLoader@3833c73d
    ---Original exception---
    java.lang.NoClassDefFoundError: com/objectframe/servlet/OFServlet
    at java.lang.ClassLoader.defineClass0(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code))
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code))
    at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:446)
    at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code))
    at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java:300)
    at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
    at java.beans.Beans.instantiate(Beans.java:201)
    at java.beans.Beans.instantiate(Beans.java:62)
    at com.ibm.ws.webcontainer.webapp.WebAppServletManager.loadServlet(WebAppServletManager.java:188)
    at com.ibm.ws.webcontainer.webapp.WebAppServletManager.getServletReference(WebAppServletManager.java:455)
    at com.ibm.ws.webcontainer.webapp.WebApp.getServletReference(WebApp.java:652)
    at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcherInfo.calculateInfo(WebAppRequestDispatcherInfo.java:187)
    at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcherInfo.<init>(WebAppRequestDispatcherInfo.java:68)
    at com.ibm.ws.webcontainer.webapp.WebApp.getRequestDispatcher(WebApp.java:1462)
    at com.ibm.ws.webcontainer.webapp.WebApp.getRequestDispatcher(WebApp.java:1421)
    at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:268)
    at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
    at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:182)
    at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
    at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
    at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:618)
    at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:443)
    at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:672)
    --- end Original exception----

    Hi Guillaume,
    I have been "playing" with section you mentioned since yesterday, but I could reach my goal :(
    An example of the problem is as following:
    Manager 1 is added to both “Project Managers” and “Resource Managers”. Accordingly he is added to “My Projects” category permission.
    Manager2.TeamLead1 (not a descendent of Manager 1) is added to only “Project Managers” and accordingly he is added to “My Projects” category permission.
    I want (Manager2.TeamLead1)’s projects to viewable only for his Manager 2 (and the Director), not for Manager 1, because the Manager1 is not responsible for managing his work
    How can I achieve that ?? :)
    Thanks,

  • Export Release Build - Problem with Server Settings

    Hello, i have a big problem and i searched the whole day yesterday but didnt found an answer...
    I started a Flex Mobile and PHP Project. The Project has a Data/Services included wich loads some customer from a database (sql)... for the first a
    used Zend and try it local (http://localhost and used the htdocs Folder of Zend)... EVERYTHING WORKS PRETTY FINE... so NOW my problem
    I wanted to export this project to a release build for my android phone... so the first warning of Flash Builder ist that the project ist currently configured to access data services from a local url. Before exporting the application, you may need to deploy your services to a remote server, then change the server root URL for your project. Click here to change server settings.
    When i click the button i get the server setting.
    Web root: C:\Program Files (x86)\Zend\Apache2\htdocs
    Root URL: http://localhost
    whe i change it now i get an eror:"The selected web root folder does not exist (i attached i screenshot of it).
    i entered de domain of my server (i also tried the ip) at Root URL. And i think there ist a problem with the Web root...? i get scary

    i know WHY Flashbuilder tells me that i have to change the setting when i deploy on the device
    my problem ist that i got this error...
    and the domain wich i have in the screenshot should only explain how i tried it...
    i entered my server url (the real domain) and i entered the folder "app" wich i have created via ftp on my server...
    BUT i also get this error (lik in the screenshot)
    i think at ROOT URL i cant make lot mistakes .... http://myserver.de or the ip
    but i think maybe my web root ist incorrect? i entered here the folder wich is directliy on my server...?
    i dont know exactly but i got an error like in the screen

  • Problems with server settings for IMAP account

    hi
    i am trying to configure Mail to work with an IMAP account. i can receive messages OK on this account, but cannot send mail. when i try to send mail i get an error message "sender verify failed".
    there was an automated process for adding the account to mail which i installed, and got the following settings:
    outgoing mail server: mail.soterianetwork.org
    server port: 26
    authentication: password
    username: soteria
    password: ****** (the password is correct)
    the error message i get is 'sender verify failed'.
    i have also tried ports 25 and 587 without success.
    on the web based control panel for the mail account it says: Be sure to enable SMTP Authentication in your E-mail client or you may not be able to send mail.
    not sure if i have done this. i have tried changing the outgoing mail server to smtp.soterianetwork.org, still without success
    i would be grateful for some help to get this set up correctly
    thanks
    nick

    it was a problem with the server. they changed some settings and all is working fine

  • Problem with Configuring Tomcat for running jsp web applications..Plz HELP

    I am using Tomcat 5.5 and Jdk 1.5.0_12 and Oracle 10g. I am using jdbc-odbc bridge connection
    to connect to the database. I have placed my project folder called
    tdm under the webapps folder in Tomcat. This 'tdm' folder consists of
    a collection of html pages,jsp pages and images of my project. Also I created a
    WEB-INF folderand in that I have lib folder which contains catalina-root.jar
    , classes12.jar and nls_charset.jar files. And also in the WEB-INF folder I have the web.xml
    file which looks like this
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!--
    Copyright 2004 The Apache Software Foundation
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
    -->
    <web-app>
    <resource-ref>
    <description>Oracle Datasource example</description>
    <res-ref-name>jdbc/gdn</res-ref-name>
    <res-type>javax.sql.DataSource</res-type>
    <res-auth>Container</res-auth>
    </resource-ref>
    </web-app>
    My Server.xml file in Tomcat\conf folder is as follows
    <!-- Example Server Configuration File -->
    <!-- Note that component elements are nested corresponding to their
    parent-child relationships with each other -->
    <!-- A "Server" is a singleton element that represents the entire JVM,
    which may contain one or more "Service" instances. The Server
    listens for a shutdown command on the indicated port.
    Note: A "Server" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <Server port="8005" shutdown="SHUTDOWN">
    <!-- Comment these entries out to disable JMX MBeans support used for the
    administration web application -->
    <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
    <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
    <!-- Global JNDI resources -->
    <GlobalNamingResources>
    <!-- Test entry for demonstration purposes -->
    <Environment name="simpleValue" type="java.lang.Integer" value="30"/>
    <!-- Editable user database that can also be used by
    UserDatabaseRealm to authenticate users -->
    <Resource name="UserDatabase" auth="Container"
    type="org.apache.catalina.UserDatabase"
    description="User database that can be updated and saved"
    factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
    pathname="conf/tomcat-users.xml" />
    <Resource name="jdbc/gdn" auth="Container"
    type="javax.sql.DataSource" driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
    url="jdbc:odbc:gdn"
    username="system" password="tiger" maxActive="20" maxIdle="10"
    maxWait="-1"/>
    </GlobalNamingResources>
    <!-- A "Service" is a collection of one or more "Connectors" that share
    a single "Container" (and therefore the web applications visible
    within that Container). Normally, that Container is an "Engine",
    but this is not required.
    Note: A "Service" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <!-- Define the Tomcat Stand-Alone Service -->
    <Service name="Catalina">
    <!-- A "Connector" represents an endpoint by which requests are received
    and responses are returned. Each Connector passes requests on to the
    associated "Container" (normally an Engine) for processing.
    By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
    You can also enable an SSL HTTP/1.1 Connector on port 8443 by
    following the instructions below and uncommenting the second Connector
    entry. SSL support requires the following steps (see the SSL Config
    HOWTO in the Tomcat 5 documentation bundle for more detailed
    instructions):
    * If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
    later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
    * Execute:
    %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
    $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
    with a password value of "changeit" for both the certificate and
    the keystore itself.
    By default, DNS lookups are enabled when a web application calls
    request.getRemoteHost(). This can have an adverse impact on
    performance, so you can disable it by setting the
    "enableLookups" attribute to "false". When DNS lookups are disabled,
    request.getRemoteHost() will return the String version of the
    IP address of the remote client.
    -->
    <!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
    <Connector
    port="5050" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" redirectPort="8443" acceptCount="100"
    connectionTimeout="20000" disableUploadTimeout="true" />
    <!-- Note : To disable connection timeouts, set connectionTimeout value
    to 0 -->
         <!-- Note : To use gzip compression you could set the following properties :
                   compression="on"
                   compressionMinSize="2048"
                   noCompressionUserAgents="gozilla, traviata"
                   compressableMimeType="text/html,text/xml"
         -->
    <!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
    <!--
    <Connector port="8443"
    maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" disableUploadTimeout="true"
    acceptCount="100" scheme="https" secure="true"
    clientAuth="false" sslProtocol="TLS" />
    -->
    <!-- Define an AJP 1.3 Connector on port 8009 -->
    <Connector port="8009"
    enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
    <!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
    <!-- See proxy documentation for more information about using this. -->
    <!--
    <Connector port="8082"
    maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" acceptCount="100" connectionTimeout="20000"
    proxyPort="80" disableUploadTimeout="true" />
    -->
    <!-- An Engine represents the entry point (within Catalina) that processes
    every request. The Engine implementation for Tomcat stand alone
    analyzes the HTTP headers included with the request, and passes them
    on to the appropriate Host (virtual host). -->
    <!-- You should set jvmRoute to support load-balancing via AJP ie :
    <Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
    -->
    <!-- Define the top level container in our container hierarchy -->
    <Engine name="Catalina" defaultHost="localhost">
    <!-- The request dumper valve dumps useful debugging information about
    the request headers and cookies that were received, and the response
    headers and cookies that were sent, for all requests received by
    this instance of Tomcat. If you care only about requests to a
    particular virtual host, or a particular application, nest this
    element inside the corresponding <Host> or <Context> entry instead.
    For a similar mechanism that is portable to all Servlet 2.4
    containers, check out the "RequestDumperFilter" Filter in the
    example application (the source for this filter may be found in
    "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
    Request dumping is disabled by default. Uncomment the following
    element to enable it. -->
    <!--
    <Valve className="org.apache.catalina.valves.RequestDumperValve"/>
    -->
    <!-- Because this Realm is here, an instance will be shared globally -->
    <!-- This Realm uses the UserDatabase configured in the global JNDI
    resources under the key "UserDatabase". Any edits
    that are performed against this UserDatabase are immediately
    available for use by the Realm. -->
    <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
    resourceName="UserDatabase"/>
    <!-- Comment out the old realm but leave here for now in case we
    need to go back quickly -->
    <!--
    <Realm className="org.apache.catalina.realm.MemoryRealm" />
    -->
    <!-- Replace the above Realm with one of the following to get a Realm
    stored in a database and accessed via JDBC -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm"
    driverName="org.gjt.mm.mysql.Driver"
    connectionURL="jdbc:mysql://localhost/authority"
    connectionName="test" connectionPassword="test"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm"
    driverName="oracle.jdbc.driver.OracleDriver"
    connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
    connectionName="scott" connectionPassword="tiger"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm"
    driverName="sun.jdbc.odbc.JdbcOdbcDriver"
    connectionURL="jdbc:odbc:CATALINA"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!-- Define the default virtual host
    Note: XML Schema validation will not work with Xerces 2.2.
    -->
    <Host name="localhost" appBase="webapps"
    unpackWARs="true" autoDeploy="true"
    xmlValidation="false" xmlNamespaceAware="false">
    <!-- Defines a cluster for this node,
    By defining this element, means that every manager will be changed.
    So when running a cluster, only make sure that you have webapps in there
    that need to be clustered and remove the other ones.
    A cluster has the following parameters:
    className = the fully qualified name of the cluster class
    name = a descriptive name for your cluster, can be anything
    mcastAddr = the multicast address, has to be the same for all the nodes
    mcastPort = the multicast port, has to be the same for all the nodes
    mcastBindAddr = bind the multicast socket to a specific address
    mcastTTL = the multicast TTL if you want to limit your broadcast
    mcastSoTimeout = the multicast readtimeout
    mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
    mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
    tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
    tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
    in case of multiple ethernet cards.
    auto means that address becomes
    InetAddress.getLocalHost().getHostAddress()
    tcpListenPort = the tcp listen port
    tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
    has a wakup bug in java.nio. Set to 0 for no timeout
    printToScreen = true means that managers will also print to std.out
    expireSessionsOnShutdown = true means that
    useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
    false means to replicate the session after each request.
    false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
    <%
    HashMap map = (HashMap)session.getAttribute("map");
    map.put("key","value");
    %>
    replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
    * Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
    * Synchronous means that the thread that executes the request, is also the
    thread the replicates the data to the other nodes, and will not return until all
    nodes have received the information.
    * Asynchronous means that there is a specific 'sender' thread for each cluster node,
    so the request thread will queue the replication request into a "smart" queue,
    and then return to the client.
    The "smart" queue is a queue where when a session is added to the queue, and the same session
    already exists in the queue from a previous request, that session will be replaced
    in the queue instead of replicating two requests. This almost never happens, unless there is a
    large network delay.
    -->
    <!--
    When configuring for clustering, you also add in a valve to catch all the requests
    coming in, at the end of the request, the session may or may not be replicated.
    A session is replicated if and only if all the conditions are met:
    1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
    2. a session exists (has been created)
    3. the request is not trapped by the "filter" attribute
    The filter attribute is to filter out requests that could not modify the session,
    hence we don't replicate the session after the end of this request.
    The filter is negative, ie, anything you put in the filter, you mean to filter out,
    ie, no replication will be done on requests that match one of the filters.
    The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
    filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
    ending with .gif and .js are intercepted.
    The deployer element can be used to deploy apps cluster wide.
    Currently the deployment only deploys/undeploys to working members in the cluster
    so no WARs are copied upons startup of a broken node.
    The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
    When a new war file is added the war gets deployed to the local instance,
    and then deployed to the other instances in the cluster.
    When a war file is deleted from the watchDir the war is undeployed locally
    and cluster wide
    -->
    <!--
    <Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
    managerClassName="org.apache.catalina.cluster.session.DeltaManager"
    expireSessionsOnShutdown="false"
    useDirtyFlag="true"
    notifyListenersOnReplication="true">
    <Membership
    className="org.apache.catalina.cluster.mcast.McastService"
    mcastAddr="228.0.0.4"
    mcastPort="45564"
    mcastFrequency="500"
    mcastDropTime="3000"/>
    <Receiver
    className="org.apache.catalina.cluster.tcp.ReplicationListener"
    tcpListenAddress="auto"
    tcpListenPort="4001"
    tcpSelectorTimeout="100"
    tcpThreadCount="6"/>
    <Sender
    className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
    replicationMode="pooled"
    ackTimeout="15000"/>
    <Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
    filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt;"/>
    <Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
    tempDir="/tmp/war-temp/"
    deployDir="/tmp/war-deploy/"
    watchDir="/tmp/war-listen/"
    watchEnabled="false"/>
    </Cluster>
    -->
    <!-- Normally, users must authenticate themselves to each web app
    individually. Uncomment the following entry if you would like
    a user to be authenticated the first time they encounter a
    resource protected by a security constraint, and then have that
    user identity maintained across all web applications contained
    in this virtual host. -->
    <!--
    <Valve className="org.apache.catalina.authenticator.SingleSignOn" />
    -->
    <!-- Access log processes all requests for this virtual host. By
    default, log files are created in the "logs" directory relative to
    $CATALINA_HOME. If you wish, you can specify a different
    directory with the "directory" attribute. Specify either a relative
    (to $CATALINA_HOME) or absolute path to the desired directory.
    -->
    <!--
    <Valve className="org.apache.catalina.valves.AccessLogValve"
    directory="logs" prefix="localhost_access_log." suffix=".txt"
    pattern="common" resolveHosts="false"/>
    -->
    <!-- Access log processes all requests for this virtual host. By
    default, log files are created in the "logs" directory relative to
    $CATALINA_HOME. If you wish, you can specify a different
    directory with the "directory" attribute. Specify either a relative
    (to $CATALINA_HOME) or absolute path to the desired directory.
    This access log implementation is optimized for maximum performance,
    but is hardcoded to support only the "common" and "combined" patterns.
    -->
    <!--
    <Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
    directory="logs" prefix="localhost_access_log." suffix=".txt"
    pattern="common" resolveHosts="false"/>
    -->
    <Context path="/tdm" docBase="tdm" debug="0" reloadable="true" />
    </Host>
    </Engine>
    </Service>
    </Server>
    I have set the context path to /tdm in the server.xml file. Should this be placed in context.xml?
    My first page in the project is called Homepage.html. To start my project I give http://localhost:5050/tdm/homepage.html
    in a browser. Here I accept a username and password from the user and then do the validation in
    a valid.jsp file, where I connect to the database and check and use jsp:forward to go to next pages
    accordingly. However when I enter the username and password and click Go in the homepage, nothing is
    displayed on the next page. The URL in the browser says valid.jsp but a blank screen appears.
    WHY DOES IT HAPPEN SO? DOES IT MEAN THAT TOMCAT IS NOT RECOGNIZING JAVA IN MY SYSTEM OR IS IT A PROBLEM
    WITH THE DATABASE CONNECTION OR SOMETHING ELSE? I FEEL THAT TOMCAT IS NOT EXECUTING JSP COMMANDS?
    IS IT POSSIBLE?WHY WILL THIS HAPPEN?
    I set the JAVA_HOME and CATALINA_HOME environment to the jdk and tomcat folders resp.
    Is there any other thing that I need to set in classpath? Should I have my project as a
    WAR file in the webapps of TOMCAT or just a folder i.e. directory structure will fine?

    I am using Tomcat 5.5 and Jdk 1.5.0_12 and Oracle 10g. I am using jdbc-odbc bridge connection
    to connect to the database. I have placed my project folder called
    tdm under the webapps folder in Tomcat. This 'tdm' folder consists of
    a collection of html pages,jsp pages and images of my project. Also I created a
    WEB-INF folderand in that I have lib folder which contains catalina-root.jar
    , classes12.jar and nls_charset.jar files. And also in the WEB-INF folder I have the web.xml
    file which looks like this
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!--
    Copyright 2004 The Apache Software Foundation
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
    -->
    <web-app>
    <resource-ref>
    <description>Oracle Datasource example</description>
    <res-ref-name>jdbc/gdn</res-ref-name>
    <res-type>javax.sql.DataSource</res-type>
    <res-auth>Container</res-auth>
    </resource-ref>
    </web-app>
    My Server.xml file in Tomcat\conf folder is as follows
    <!-- Example Server Configuration File -->
    <!-- Note that component elements are nested corresponding to their
    parent-child relationships with each other -->
    <!-- A "Server" is a singleton element that represents the entire JVM,
    which may contain one or more "Service" instances. The Server
    listens for a shutdown command on the indicated port.
    Note: A "Server" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <Server port="8005" shutdown="SHUTDOWN">
    <!-- Comment these entries out to disable JMX MBeans support used for the
    administration web application -->
    <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
    <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
    <!-- Global JNDI resources -->
    <GlobalNamingResources>
    <!-- Test entry for demonstration purposes -->
    <Environment name="simpleValue" type="java.lang.Integer" value="30"/>
    <!-- Editable user database that can also be used by
    UserDatabaseRealm to authenticate users -->
    <Resource name="UserDatabase" auth="Container"
    type="org.apache.catalina.UserDatabase"
    description="User database that can be updated and saved"
    factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
    pathname="conf/tomcat-users.xml" />
    <Resource name="jdbc/gdn" auth="Container"
    type="javax.sql.DataSource" driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
    url="jdbc:odbc:gdn"
    username="system" password="tiger" maxActive="20" maxIdle="10"
    maxWait="-1"/>
    </GlobalNamingResources>
    <!-- A "Service" is a collection of one or more "Connectors" that share
    a single "Container" (and therefore the web applications visible
    within that Container). Normally, that Container is an "Engine",
    but this is not required.
    Note: A "Service" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <!-- Define the Tomcat Stand-Alone Service -->
    <Service name="Catalina">
    <!-- A "Connector" represents an endpoint by which requests are received
    and responses are returned. Each Connector passes requests on to the
    associated "Container" (normally an Engine) for processing.
    By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
    You can also enable an SSL HTTP/1.1 Connector on port 8443 by
    following the instructions below and uncommenting the second Connector
    entry. SSL support requires the following steps (see the SSL Config
    HOWTO in the Tomcat 5 documentation bundle for more detailed
    instructions):
    * If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
    later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
    * Execute:
    %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
    $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
    with a password value of "changeit" for both the certificate and
    the keystore itself.
    By default, DNS lookups are enabled when a web application calls
    request.getRemoteHost(). This can have an adverse impact on
    performance, so you can disable it by setting the
    "enableLookups" attribute to "false". When DNS lookups are disabled,
    request.getRemoteHost() will return the String version of the
    IP address of the remote client.
    -->
    <!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
    <Connector
    port="5050" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" redirectPort="8443" acceptCount="100"
    connectionTimeout="20000" disableUploadTimeout="true" />
    <!-- Note : To disable connection timeouts, set connectionTimeout value
    to 0 -->
         <!-- Note : To use gzip compression you could set the following properties :
                   compression="on"
                   compressionMinSize="2048"
                   noCompressionUserAgents="gozilla, traviata"
                   compressableMimeType="text/html,text/xml"
         -->
    <!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
    <!--
    <Connector port="8443"
    maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" disableUploadTimeout="true"
    acceptCount="100" scheme="https" secure="true"
    clientAuth="false" sslProtocol="TLS" />
    -->
    <!-- Define an AJP 1.3 Connector on port 8009 -->
    <Connector port="8009"
    enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
    <!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
    <!-- See proxy documentation for more information about using this. -->
    <!--
    <Connector port="8082"
    maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" acceptCount="100" connectionTimeout="20000"
    proxyPort="80" disableUploadTimeout="true" />
    -->
    <!-- An Engine represents the entry point (within Catalina) that processes
    every request. The Engine implementation for Tomcat stand alone
    analyzes the HTTP headers included with the request, and passes them
    on to the appropriate Host (virtual host). -->
    <!-- You should set jvmRoute to support load-balancing via AJP ie :
    <Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
    -->
    <!-- Define the top level container in our container hierarchy -->
    <Engine name="Catalina" defaultHost="localhost">
    <!-- The request dumper valve dumps useful debugging information about
    the request headers and cookies that were received, and the response
    headers and cookies that were sent, for all requests received by
    this instance of Tomcat. If you care only about requests to a
    particular virtual host, or a particular application, nest this
    element inside the corresponding <Host> or <Context> entry instead.
    For a similar mechanism that is portable to all Servlet 2.4
    containers, check out the "RequestDumperFilter" Filter in the
    example application (the source for this filter may be found in
    "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
    Request dumping is disabled by default. Uncomment the following
    element to enable it. -->
    <!--
    <Valve className="org.apache.catalina.valves.RequestDumperValve"/>
    -->
    <!-- Because this Realm is here, an instance will be shared globally -->
    <!-- This Realm uses the UserDatabase configured in the global JNDI
    resources under the key "UserDatabase". Any edits
    that are performed against this UserDatabase are immediately
    available for use by the Realm. -->
    <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
    resourceName="UserDatabase"/>
    <!-- Comment out the old realm but leave here for now in case we
    need to go back quickly -->
    <!--
    <Realm className="org.apache.catalina.realm.MemoryRealm" />
    -->
    <!-- Replace the above Realm with one of the following to get a Realm
    stored in a database and accessed via JDBC -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm"
    driverName="org.gjt.mm.mysql.Driver"
    connectionURL="jdbc:mysql://localhost/authority"
    connectionName="test" connectionPassword="test"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm"
    driverName="oracle.jdbc.driver.OracleDriver"
    connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
    connectionName="scott" connectionPassword="tiger"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm"
    driverName="sun.jdbc.odbc.JdbcOdbcDriver"
    connectionURL="jdbc:odbc:CATALINA"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!-- Define the default virtual host
    Note: XML Schema validation will not work with Xerces 2.2.
    -->
    <Host name="localhost" appBase="webapps"
    unpackWARs="true" autoDeploy="true"
    xmlValidation="false" xmlNamespaceAware="false">
    <!-- Defines a cluster for this node,
    By defining this element, means that every manager will be changed.
    So when running a cluster, only make sure that you have webapps in there
    that need to be clustered and remove the other ones.
    A cluster has the following parameters:
    className = the fully qualified name of the cluster class
    name = a descriptive name for your cluster, can be anything
    mcastAddr = the multicast address, has to be the same for all the nodes
    mcastPort = the multicast port, has to be the same for all the nodes
    mcastBindAddr = bind the multicast socket to a specific address
    mcastTTL = the multicast TTL if you want to limit your broadcast
    mcastSoTimeout = the multicast readtimeout
    mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
    mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
    tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
    tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
    in case of multiple ethernet cards.
    auto means that address becomes
    InetAddress.getLocalHost().getHostAddress()
    tcpListenPort = the tcp listen port
    tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
    has a wakup bug in java.nio. Set to 0 for no timeout
    printToScreen = true means that managers will also print to std.out
    expireSessionsOnShutdown = true means that
    useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
    false means to replicate the session after each request.
    false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
    <%
    HashMap map = (HashMap)session.getAttribute("map");
    map.put("key","value");
    %>
    replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
    * Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
    * Synchronous means that the thread that executes the request, is also the
    thread the replicates the data to the other nodes, and will not return until all
    nodes have received the information.
    * Asynchronous means that there is a specific 'sender' thread for each cluster node,
    so the request thread will queue the replication request into a "smart" queue,
    and then return to the client.
    The "smart" queue is a queue where when a session is added to the queue, and the same session
    already exists in the queue from a previous request, that session will be replaced
    in the queue instead of replicating two requests. This almost never happens, unless there is a
    large network delay.
    -->
    <!--
    When configuring for clustering, you also add in a valve to catch all the requests
    coming in, at the end of the request, the session may or may not be replicated.
    A session is replicated if and only if all the conditions are met:
    1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
    2. a session exists (has been created)
    3. the request is not trapped by the "filter" attribute
    The filter attribute is to filter out requests that could not modify the session,
    hence we don't replicate the session after the end of this request.
    The filter is negative, ie, anything you put in the filter, you mean to filter out,
    ie, no replication will be done on requests that match one of the filters.
    The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
    filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
    ending with .gif and .js are intercepted.
    The deployer element can be used to deploy apps cluster wide.
    Currently the deployment only deploys/undeploys to working members in the cluster
    so no WARs are copied upons startup of a broken node.
    The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
    When a new war file is added the war gets deployed to the local instance,
    and then deployed to the other instances in the cluster.
    When a war file is deleted from the watchDir the war is undeployed locally
    and cluster wide
    -->
    <!--
    <Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
    managerClassName="org.apache.catalina.cluster.session.DeltaManager"
    expireSessionsOnShutdown="false"
    useDirtyFlag="true"
    notifyListenersOnReplication="true">
    <Membership
    className="org.apache.catalina.cluster.mcast.McastService"
    mcastAddr="228.0.0.4"
    mcastPort="45564"
    mcastFrequency="500"
    mcastDropTime="3000"/>
    <Receiver
    className="org.apache.catalina.cluster.tcp.ReplicationListener"
    tcpListenAddress="auto"
    tcpListenPort="4001"
    tcpSelectorTimeout="100"
    tcpThreadCount="6"/>
    <Sender
    className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
    replicationMode="pooled"
    ackTimeout="15000"/>
    <Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
    filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt;"/>
    <Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
    tempDir="/tmp/war-temp/"
    deployDir="/tmp/war-deploy/"
    watchDir="/tmp/war-listen/"
    watchEnabled="false"/>
    </Cluster>
    -->
    <!-- Normally, users must authenticate themselves to each web app
    individually. Uncomment the following entry if you would like
    a user to be authenticated the first time they encounter a
    resource protected by a security constraint, and then have that
    user identity maintained across all web applications contained
    in this virtual host. -->
    <!--
    <Valve className="org.apache.catalina.authenticator.SingleSignOn" />
    -->
    <!-- Access log processes all requests for this virtual host. By
    default, log files are created in the "logs" directory relative to
    $CATALINA_HOME. If you wish, you can specify a different
    directory with the "directory" attribute. Specify either a relative
    (to $CATALINA_HOME) or absolute path to the desired directory.
    -->
    <!--
    <Valve className="org.apache.catalina.valves.AccessLogValve"
    directory="logs" prefix="localhost_access_log." suffix=".txt"
    pattern="common" resolveHosts="false"/>
    -->
    <!-- Access log processes all requests for this virtual host. By
    default, log files are created in the "logs" directory relative to
    $CATALINA_HOME. If you wish, you can specify a different
    directory with the "directory" attribute. Specify either a relative
    (to $CATALINA_HOME) or absolute path to the desired directory.
    This access log implementation is optimized for maximum performance,
    but is hardcoded to support only the "common" and "combined" patterns.
    -->
    <!--
    <Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
    directory="logs" prefix="localhost_access_log." suffix=".txt"
    pattern="common" resolveHosts="false"/>
    -->
    <Context path="/tdm" docBase="tdm" debug="0" reloadable="true" />
    </Host>
    </Engine>
    </Service>
    </Server>
    I have set the context path to /tdm in the server.xml file. Should this be placed in context.xml?
    My first page in the project is called Homepage.html. To start my project I give http://localhost:5050/tdm/homepage.html
    in a browser. Here I accept a username and password from the user and then do the validation in
    a valid.jsp file, where I connect to the database and check and use jsp:forward to go to next pages
    accordingly. However when I enter the username and password and click Go in the homepage, nothing is
    displayed on the next page. The URL in the browser says valid.jsp but a blank screen appears.
    WHY DOES IT HAPPEN SO? DOES IT MEAN THAT TOMCAT IS NOT RECOGNIZING JAVA IN MY SYSTEM OR IS IT A PROBLEM
    WITH THE DATABASE CONNECTION OR SOMETHING ELSE? I FEEL THAT TOMCAT IS NOT EXECUTING JSP COMMANDS?
    IS IT POSSIBLE?WHY WILL THIS HAPPEN?
    I set the JAVA_HOME and CATALINA_HOME environment to the jdk and tomcat folders resp.
    Is there any other thing that I need to set in classpath? Should I have my project as a
    WAR file in the webapps of TOMCAT or just a folder i.e. directory structure will fine?

  • Problem with configuration supporting point in MD62

    Hi,
    well I have detected a problem with my planned independent requirements for some materials.
    The materials that are concerned are semifinished product which have an active BOM.
    Example :
    material A composed with material B and C.
    On the material A I have the strategy group 54. For these materials I have "VSE" PIR.
    The problem is that for many materials, the VSE needs can not be seen by components.
    Example, on material A, I have a VSE need on 15.02.2010, MRP generates a planned order on 15.02.2010 on material A. No problem but I have in MD04 an alert 52 for these PO.
    I go to material B or C in MD04 and I don't see any needs ! The planned order needs have not been splitted to the components.
    I have seen that if I go to MD62 for material A and if I click on "Configuration supporting point", everything is OK after next MRP Run but the problem seems to go back after few days.
    The strange thing is that it works perfectly for some materials and it doesn't work for others materials although there is no differences between data of these materials !
    Finally, I have to say that program RM60RR20 is turning every night and I have seen that there are some calls to function DELETE_SUPPOINT. Maybe this program is deleting the supporting point but it should recreate the supporting point after...
    Is there anybody which know how this program is working or why sometimes my supporting point is deleted without being recreate ?
    Thanks.

    Hi Frederico,
    Have you tried typing the query in query manager and are you sure you've selected the correct column? You can check the column name if you switch system information on and verifying the values in the database for that column.
    Hope it helps,
    Adele

  • Ibooks - Problem with configuration of my iPhone. Please Restore?

    I had bought a book on my iPad today .. and I sync'd it with my iPhone so I can read it on my iPhone as well .. but when I open the book it says " There is a problem with the configuration of your iPhone. Please restore with iTunes and reinstall iBooks."
    anybody know what is going on?

    Hi Kern,
    It sounds like you jailbroke you iPhone. Try restoring it and setting it up as a new device.
    This article discusses that error.
    WTH.

  • Problems with Configuration of AdobeInteractiveForms

    Hello everbody,
    I have installed/deployded
    - SP11 of Netweaver Developer Studio
    - Adobe Acrobat Reader 6.02
    - Adobe Document Services SP 11
    I have cofigured the Adobe Document Services according to the "Adobe Document Service Configuration Guide"
    Everthing worked fine, except for the Installation of The Credential:
    In page 24 in chapter "4.4 Registering the Password for a Credential" it says:
    To register the password for a credential:
    1. Log on to the Visual Administrator
    2. Choose Services -> Document Services Configuration
    3. select Credentials
    4. Choose Browse to search for the name of the credential
    When I click Browse I get the following error:
    An error occured when indexing the credential files:
    com.adobe.services.sap.configuration.ConfigurationException:...
    org.com.CORBA.BAD_OPERATION: The delegate has not been set! vmcid:0x0 minor code:0 completed:No
    Despite this problem, I have been trying to create an Interactive Form via WebDynpro. On "Deploy new Archive an run", the following error is returned in the browser:
    "java.lang.NullPointerException
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.checkResponseStatus(PDFObject.java:334)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:266)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:209)
    Another interesting effect is, that I get a 404 when calling http://localhost:50000/adobe/RegisterCredential
    Calling http://localhost:50000/AdobeDocumentServices/Config is working fine.
    I have tried already to undeploy and redeploy the Adobe Document Services without any effect.
    Has anybody experienced the same problem?
    Regards,
    Andreas Putscher

    Thanks,
    Moving the shared drive into the dock solves the problem. We have worked with it over the weekend. Access to the shared drive is now responding as expected, the problems with iTunes are gone and also the info of the files and directories is working fine.
    Regards

  • Problem with memory settings

    Hello,
    i got a brand new PC4000 PRO from corsair and i got problem setting timings with this motherboard (neo2 PFISR - bios  v3.9).
    I can't set CAS timing nor to 3 neither to 2, it automatically turns it back to 2.5.
    It seems that there is a lot of users having the same issues with this motherboard all over the net, but they told me to post here.
    Has anybody an idea why this happen and how i can fix it ?
    Thanks,
    Fab

    Hi there,
    For some reason the BIOS settings have a rather confusion relation.
    This is what my experiences have been, please try them and report your findings:
    - MAT is enabled (and overrules SPD or manual memory timings) if:
    Memory clock is set to "auto" within the frequency menu AND you set your perfomance above FAST.
    To get a stable system, I'd advice the following:
    - Go back to default BIOS settings.
    - Disable D.O.T.
    - Disable Spread Spectrum
    - Fix your memory frequency to what it should be (e.g. 400Mhz), and not AUTO.
    - Choose SPD timings for your memory (or set them below SPD timing manually).
    - Start with performance settings to SLOW.
    Check memory timing settings (chipset) with AIDA or CPU-z.
    Check stability with Prime95 & torture test on maximum RAM.
    Once the system is table, try upping the speed setting, check the actual timings and see what happens. If you still have problems, take out one memory stick and try with just one (maybe one is faulty).
    Once you got it stable, continue from here.
    Keep in mind: in my experience, if you set your memory frequency at a fixed frequency and use SPD settings, you will find that upping the performance settings, changes the memory timings! However as long as the frequency is not AUTO, MAT is not enabled, whatever the performance setting.
    It really confused me at first, as I could not get the system running with MAT enabled, whatever memory time I entered. But with fix memory frequency, I got the system stable with 2,2,2,5 timing!
    If anyone has techdoc on these matters, I'd appreciate an URL.
    Bios 2.3 on 865PE neo2-LS
    Twin Kingston ValueRam Cl2.5 (winbond)

  • Problem with Global settings panels

    Using Flash player v10,1,53,64. with IE7 and Safari 5. I am trying to turn off the auto update notification as I work in an infant school and the pop-up notifications confuse the children.
    Flash objects are working fine and the http://www.adobe.com/software/flash/about/ page tells me that I have the version of Flash installed with no problem.
    I then right click on an active Flash object on a web page and choose "Global settings..."
    Then choose Global Notification Settings Panel... , which takes me to  http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
    At this point, instead of the panel I get the "This content requires Flash" replacement item - so I can't go any further. The same sthing happens with any of the Settings panels.
    So one page on the Adobe site says I have the player installed, others don't.
    Help much appreciated.

    pwillener wrote:
    Does that happen on all browsers?
    Anyway, another way of disabling update notifications is by using a mms.cfg file; see http://kb2.adobe.com/cps/167/16701594.html for details.
    It has happened with all the browsers I have checked, some may be a bit out of date as we don't use them regularly but I have the problem with
    Internet Explorer 7.0.5730.13
    Safari 5.0
    Firefox 3.0.19
    Chrome 5.0.375.86
    I'll have a look at the mms.cfg option this afternoon.
    I'm beginning to wonder whether this is caused by a firewall problem. I don't control the firewall settings. I've been assured by our network team that there is no block, but I'm wondering if that is right. I suppose they could have a block on flash content from not specifically authorised sites (which might well include Adobe) that would still let the Adobe site interrogate to find out the Flash version - but as I'm not 100% certain how the protocols work I can't be sure, I'll have to recheck that one.
    Thanks for the help so far.

  • Problem with national settings on DS9i

    Hi all,
    I just installed Forms Developer 902 on Windows NT.
    In registry my NLS_LANG=POLISH_POLAND.EE8WIN1250.
    The Form i Menu module support my national settings
    and don't have any problem with polish font.
    My destination platform for OAS 902 is SUSE80 Linux.
    I maked ftp binary copy *.fmb and *.mmb files from NT
    to destination platform and compile everything.
    But Form and Menu module not support my national settings.
    Where is problem? Maybe any idea?
    In {ORACLE_HOME}/bin/f90genm.sh
    is NLS_LANG=POLISH_POLAND.EE8MSWIN1250 and
    in {ORACLE_HOME}/forms90/server/default.env
    is NLS_LANG=POLISH_POLAND.EE8MSWIN1250

    Hi Billhp49,
    Here are the first things I would try for being unable to send mail:
    iOS: Unable to send or receive email
    http://support.apple.com/kb/ts3899
    Cheers!
    - Ari

  • Problem with Blacklight-settings

    I recently purchased my first IPod (30GB) and I'm having a problem with a couple of settings. The blacklight is set to switch on after 10 seconds and at the same time my Ipod starts playing music (even when the lock is on). Did I forget to change a setting? I can't seem to figure it out. If anyone could get back to me about this I would really appreciate it.
    Thanks in advance!
    APPLE MA146 IPOD VIDEO 30GB BLACK   Windows XP Pro  

    I recently purchased my first IPod (30GB) and I'm
    having a problem with a couple of settings. The
    blacklight is set to switch on after 10 seconds and
    at the same time my Ipod starts playing music (even
    when the lock is on). Did I forget to change a
    setting? I can't seem to figure it out. If anyone
    could get back to me about this I would really
    appreciate it.
    Thanks in advance!
    APPLE
    MA146 IPOD VIDEO 30GB BLACK   Windows XP Pro
    That sounds like the alarm is set if it comes on after a set time. You can find the menu options for this in -- extras--clock--alarm clock. This is where you select the play list to play on wake up.
    Hope this helps

Maybe you are looking for