Problem with configuration supporting point in MD62
Hi,
well I have detected a problem with my planned independent requirements for some materials.
The materials that are concerned are semifinished product which have an active BOM.
Example :
material A composed with material B and C.
On the material A I have the strategy group 54. For these materials I have "VSE" PIR.
The problem is that for many materials, the VSE needs can not be seen by components.
Example, on material A, I have a VSE need on 15.02.2010, MRP generates a planned order on 15.02.2010 on material A. No problem but I have in MD04 an alert 52 for these PO.
I go to material B or C in MD04 and I don't see any needs ! The planned order needs have not been splitted to the components.
I have seen that if I go to MD62 for material A and if I click on "Configuration supporting point", everything is OK after next MRP Run but the problem seems to go back after few days.
The strange thing is that it works perfectly for some materials and it doesn't work for others materials although there is no differences between data of these materials !
Finally, I have to say that program RM60RR20 is turning every night and I have seen that there are some calls to function DELETE_SUPPOINT. Maybe this program is deleting the supporting point but it should recreate the supporting point after...
Is there anybody which know how this program is working or why sometimes my supporting point is deleted without being recreate ?
Thanks.
Hi Frederico,
Have you tried typing the query in query manager and are you sure you've selected the correct column? You can check the column name if you switch system information on and verifying the values in the database for that column.
Hope it helps,
Adele
Similar Messages
-
Hello,
I have a problem with comma and point in a double-digit.
I use a english driver for HM8142. When I get the values then I only get
int-digits. How can I change "Use comma as separator" . I tried to change
the option in LabVIEW.
I changed it, then I got the window. "To change, restart the programm". I
have done this. But when I have a look at the option, it is not changed.
What can I do?
I am not the admin on the computer.
MartinHi Martin,
you do not have to change any system settings neither in LabVIEW nor in your windows.
All instrument drivers should use a point as decimal separator. You can overwrite the decimal point handling in the string functions "Scan from string" and "Format into string".
Make a right click on the function and use "Edit Scan String". In the dialog open the ring under "Selected operation", the last entry allows you to set the character for the decimal separator. This separator will be used for all the following floating point numbers.
From your name and problem I think you are located in central europe. I do not have a german version of LV so I cannot tell you how the elements are named in german.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions -
Problem with configuration of wifi newtork- dhcp
hi.
i've got a small problem with configuration of wi-fi network.
i use dhcp network.
there are some errors about network during boot up (but its to fast for my to write it down)
after log-in i have to setup network access by typing
iwconfig eth2 essid SpeedTouchBCE72F
and then i heve to run this command
dhclient
and after that i've got an access to internet
this is my rc.file
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="pl_PL.UTF-8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/London"
KEYMAP="-u pl2"
CONSOLEFONT="lat2-16.psfu.gz"
USECOLOR="yes"
LC_ALL="pl_PL.UTF-8"
LESSCHARSET="UTF-8"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by udev
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to blacklist it
MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="linugrat"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
# interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth2="dhcp"
INTERFACES=(lo eth2)
ROUTES=(!gateway)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng ipw3945d network netfs crond)
# End of file
szymonHi Mariano
I think you need to <b>restart your portal Engine</b> after making correct settings.
Also please refer to the link below to get a better insight:-
http://help.sap.com/saphelp_nw04s/helpdata/en/0b/719a425ffac46ae10000000a155106/frameset.htm
Regards
Navneet -
I have a problem with adobe support advisor, how can i reinstall this program
i have a problem with adobe support advisor, how can i reinstall this program
hi wie kann ich adobe support advisor reinstalieren mac , ich bekomme fehlermeldung beim photoshop installation
Von meinem iPhone gesendet
Am 17.08.2014 um 07:17 schrieb Willi Adelberger <[email protected]>:
i have a problem with adobe support advisor, how can i reinstall this program
created by Willi Adelberger in Deutsche Foren - View the full discussion
Kannst Du mal anfangen Deine Frage zu stellen?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6647388#6647388
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Deutsche Foren by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Problem with Configuring Tomcat for running jsp web applications..Plz HELP
I am using Tomcat 5.5 and Jdk 1.5.0_12 and Oracle 10g. I am using jdbc-odbc bridge connection
to connect to the database. I have placed my project folder called
tdm under the webapps folder in Tomcat. This 'tdm' folder consists of
a collection of html pages,jsp pages and images of my project. Also I created a
WEB-INF folderand in that I have lib folder which contains catalina-root.jar
, classes12.jar and nls_charset.jar files. And also in the WEB-INF folder I have the web.xml
file which looks like this
<?xml version="1.0" encoding="ISO-8859-1"?>
<!--
Copyright 2004 The Apache Software Foundation
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<web-app>
<resource-ref>
<description>Oracle Datasource example</description>
<res-ref-name>jdbc/gdn</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
My Server.xml file in Tomcat\conf folder is as follows
<!-- Example Server Configuration File -->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="8005" shutdown="SHUTDOWN">
<!-- Comment these entries out to disable JMX MBeans support used for the
administration web application -->
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<!-- Global JNDI resources -->
<GlobalNamingResources>
<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users -->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
<Resource name="jdbc/gdn" auth="Container"
type="javax.sql.DataSource" driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
url="jdbc:odbc:gdn"
username="system" password="tiger" maxActive="20" maxIdle="10"
maxWait="-1"/>
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Catalina">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 5 documentation bundle for more detailed
instructions):
* If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
<Connector
port="5050" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" />
<!-- Note : To disable connection timeouts, set connectionTimeout value
to 0 -->
<!-- Note : To use gzip compression you could set the following properties :
compression="on"
compressionMinSize="2048"
noCompressionUserAgents="gozilla, traviata"
compressableMimeType="text/html,text/xml"
-->
<!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
<!--
<Connector port="8443"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" disableUploadTimeout="true"
acceptCount="100" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" />
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
<!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector port="8082"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" acceptCount="100" connectionTimeout="20000"
proxyPort="80" disableUploadTimeout="true" />
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- You should set jvmRoute to support load-balancing via AJP ie :
<Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
-->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Catalina" defaultHost="localhost">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.4
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Because this Realm is here, an instance will be shared globally -->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
<!-- Comment out the old realm but leave here for now in case we
need to go back quickly -->
<!--
<Realm className="org.apache.catalina.realm.MemoryRealm" />
-->
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority"
connectionName="test" connectionPassword="test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
connectionName="scott" connectionPassword="tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<!-- Defines a cluster for this node,
By defining this element, means that every manager will be changed.
So when running a cluster, only make sure that you have webapps in there
that need to be clustered and remove the other ones.
A cluster has the following parameters:
className = the fully qualified name of the cluster class
name = a descriptive name for your cluster, can be anything
mcastAddr = the multicast address, has to be the same for all the nodes
mcastPort = the multicast port, has to be the same for all the nodes
mcastBindAddr = bind the multicast socket to a specific address
mcastTTL = the multicast TTL if you want to limit your broadcast
mcastSoTimeout = the multicast readtimeout
mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
in case of multiple ethernet cards.
auto means that address becomes
InetAddress.getLocalHost().getHostAddress()
tcpListenPort = the tcp listen port
tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
has a wakup bug in java.nio. Set to 0 for no timeout
printToScreen = true means that managers will also print to std.out
expireSessionsOnShutdown = true means that
useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
false means to replicate the session after each request.
false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
<%
HashMap map = (HashMap)session.getAttribute("map");
map.put("key","value");
%>
replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
* Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
* Synchronous means that the thread that executes the request, is also the
thread the replicates the data to the other nodes, and will not return until all
nodes have received the information.
* Asynchronous means that there is a specific 'sender' thread for each cluster node,
so the request thread will queue the replication request into a "smart" queue,
and then return to the client.
The "smart" queue is a queue where when a session is added to the queue, and the same session
already exists in the queue from a previous request, that session will be replaced
in the queue instead of replicating two requests. This almost never happens, unless there is a
large network delay.
-->
<!--
When configuring for clustering, you also add in a valve to catch all the requests
coming in, at the end of the request, the session may or may not be replicated.
A session is replicated if and only if all the conditions are met:
1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
2. a session exists (has been created)
3. the request is not trapped by the "filter" attribute
The filter attribute is to filter out requests that could not modify the session,
hence we don't replicate the session after the end of this request.
The filter is negative, ie, anything you put in the filter, you mean to filter out,
ie, no replication will be done on requests that match one of the filters.
The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
ending with .gif and .js are intercepted.
The deployer element can be used to deploy apps cluster wide.
Currently the deployment only deploys/undeploys to working members in the cluster
so no WARs are copied upons startup of a broken node.
The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
When a new war file is added the war gets deployed to the local instance,
and then deployed to the other instances in the cluster.
When a war file is deleted from the watchDir the war is undeployed locally
and cluster wide
-->
<!--
<Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
managerClassName="org.apache.catalina.cluster.session.DeltaManager"
expireSessionsOnShutdown="false"
useDirtyFlag="true"
notifyListenersOnReplication="true">
<Membership
className="org.apache.catalina.cluster.mcast.McastService"
mcastAddr="228.0.0.4"
mcastPort="45564"
mcastFrequency="500"
mcastDropTime="3000"/>
<Receiver
className="org.apache.catalina.cluster.tcp.ReplicationListener"
tcpListenAddress="auto"
tcpListenPort="4001"
tcpSelectorTimeout="100"
tcpThreadCount="6"/>
<Sender
className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
replicationMode="pooled"
ackTimeout="15000"/>
<Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt;"/>
<Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
tempDir="/tmp/war-temp/"
deployDir="/tmp/war-deploy/"
watchDir="/tmp/war-listen/"
watchEnabled="false"/>
</Cluster>
-->
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across all web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
This access log implementation is optimized for maximum performance,
but is hardcoded to support only the "common" and "combined" patterns.
-->
<!--
<Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<Context path="/tdm" docBase="tdm" debug="0" reloadable="true" />
</Host>
</Engine>
</Service>
</Server>
I have set the context path to /tdm in the server.xml file. Should this be placed in context.xml?
My first page in the project is called Homepage.html. To start my project I give http://localhost:5050/tdm/homepage.html
in a browser. Here I accept a username and password from the user and then do the validation in
a valid.jsp file, where I connect to the database and check and use jsp:forward to go to next pages
accordingly. However when I enter the username and password and click Go in the homepage, nothing is
displayed on the next page. The URL in the browser says valid.jsp but a blank screen appears.
WHY DOES IT HAPPEN SO? DOES IT MEAN THAT TOMCAT IS NOT RECOGNIZING JAVA IN MY SYSTEM OR IS IT A PROBLEM
WITH THE DATABASE CONNECTION OR SOMETHING ELSE? I FEEL THAT TOMCAT IS NOT EXECUTING JSP COMMANDS?
IS IT POSSIBLE?WHY WILL THIS HAPPEN?
I set the JAVA_HOME and CATALINA_HOME environment to the jdk and tomcat folders resp.
Is there any other thing that I need to set in classpath? Should I have my project as a
WAR file in the webapps of TOMCAT or just a folder i.e. directory structure will fine?I am using Tomcat 5.5 and Jdk 1.5.0_12 and Oracle 10g. I am using jdbc-odbc bridge connection
to connect to the database. I have placed my project folder called
tdm under the webapps folder in Tomcat. This 'tdm' folder consists of
a collection of html pages,jsp pages and images of my project. Also I created a
WEB-INF folderand in that I have lib folder which contains catalina-root.jar
, classes12.jar and nls_charset.jar files. And also in the WEB-INF folder I have the web.xml
file which looks like this
<?xml version="1.0" encoding="ISO-8859-1"?>
<!--
Copyright 2004 The Apache Software Foundation
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<web-app>
<resource-ref>
<description>Oracle Datasource example</description>
<res-ref-name>jdbc/gdn</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
My Server.xml file in Tomcat\conf folder is as follows
<!-- Example Server Configuration File -->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="8005" shutdown="SHUTDOWN">
<!-- Comment these entries out to disable JMX MBeans support used for the
administration web application -->
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<!-- Global JNDI resources -->
<GlobalNamingResources>
<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users -->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
<Resource name="jdbc/gdn" auth="Container"
type="javax.sql.DataSource" driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
url="jdbc:odbc:gdn"
username="system" password="tiger" maxActive="20" maxIdle="10"
maxWait="-1"/>
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Catalina">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 5 documentation bundle for more detailed
instructions):
* If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
<Connector
port="5050" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" />
<!-- Note : To disable connection timeouts, set connectionTimeout value
to 0 -->
<!-- Note : To use gzip compression you could set the following properties :
compression="on"
compressionMinSize="2048"
noCompressionUserAgents="gozilla, traviata"
compressableMimeType="text/html,text/xml"
-->
<!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
<!--
<Connector port="8443"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" disableUploadTimeout="true"
acceptCount="100" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" />
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
<!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector port="8082"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" acceptCount="100" connectionTimeout="20000"
proxyPort="80" disableUploadTimeout="true" />
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- You should set jvmRoute to support load-balancing via AJP ie :
<Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
-->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Catalina" defaultHost="localhost">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.4
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Because this Realm is here, an instance will be shared globally -->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
<!-- Comment out the old realm but leave here for now in case we
need to go back quickly -->
<!--
<Realm className="org.apache.catalina.realm.MemoryRealm" />
-->
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority"
connectionName="test" connectionPassword="test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
connectionName="scott" connectionPassword="tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<!-- Defines a cluster for this node,
By defining this element, means that every manager will be changed.
So when running a cluster, only make sure that you have webapps in there
that need to be clustered and remove the other ones.
A cluster has the following parameters:
className = the fully qualified name of the cluster class
name = a descriptive name for your cluster, can be anything
mcastAddr = the multicast address, has to be the same for all the nodes
mcastPort = the multicast port, has to be the same for all the nodes
mcastBindAddr = bind the multicast socket to a specific address
mcastTTL = the multicast TTL if you want to limit your broadcast
mcastSoTimeout = the multicast readtimeout
mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
in case of multiple ethernet cards.
auto means that address becomes
InetAddress.getLocalHost().getHostAddress()
tcpListenPort = the tcp listen port
tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
has a wakup bug in java.nio. Set to 0 for no timeout
printToScreen = true means that managers will also print to std.out
expireSessionsOnShutdown = true means that
useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
false means to replicate the session after each request.
false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
<%
HashMap map = (HashMap)session.getAttribute("map");
map.put("key","value");
%>
replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
* Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
* Synchronous means that the thread that executes the request, is also the
thread the replicates the data to the other nodes, and will not return until all
nodes have received the information.
* Asynchronous means that there is a specific 'sender' thread for each cluster node,
so the request thread will queue the replication request into a "smart" queue,
and then return to the client.
The "smart" queue is a queue where when a session is added to the queue, and the same session
already exists in the queue from a previous request, that session will be replaced
in the queue instead of replicating two requests. This almost never happens, unless there is a
large network delay.
-->
<!--
When configuring for clustering, you also add in a valve to catch all the requests
coming in, at the end of the request, the session may or may not be replicated.
A session is replicated if and only if all the conditions are met:
1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
2. a session exists (has been created)
3. the request is not trapped by the "filter" attribute
The filter attribute is to filter out requests that could not modify the session,
hence we don't replicate the session after the end of this request.
The filter is negative, ie, anything you put in the filter, you mean to filter out,
ie, no replication will be done on requests that match one of the filters.
The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
ending with .gif and .js are intercepted.
The deployer element can be used to deploy apps cluster wide.
Currently the deployment only deploys/undeploys to working members in the cluster
so no WARs are copied upons startup of a broken node.
The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
When a new war file is added the war gets deployed to the local instance,
and then deployed to the other instances in the cluster.
When a war file is deleted from the watchDir the war is undeployed locally
and cluster wide
-->
<!--
<Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
managerClassName="org.apache.catalina.cluster.session.DeltaManager"
expireSessionsOnShutdown="false"
useDirtyFlag="true"
notifyListenersOnReplication="true">
<Membership
className="org.apache.catalina.cluster.mcast.McastService"
mcastAddr="228.0.0.4"
mcastPort="45564"
mcastFrequency="500"
mcastDropTime="3000"/>
<Receiver
className="org.apache.catalina.cluster.tcp.ReplicationListener"
tcpListenAddress="auto"
tcpListenPort="4001"
tcpSelectorTimeout="100"
tcpThreadCount="6"/>
<Sender
className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
replicationMode="pooled"
ackTimeout="15000"/>
<Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt;"/>
<Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
tempDir="/tmp/war-temp/"
deployDir="/tmp/war-deploy/"
watchDir="/tmp/war-listen/"
watchEnabled="false"/>
</Cluster>
-->
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across all web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
This access log implementation is optimized for maximum performance,
but is hardcoded to support only the "common" and "combined" patterns.
-->
<!--
<Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<Context path="/tdm" docBase="tdm" debug="0" reloadable="true" />
</Host>
</Engine>
</Service>
</Server>
I have set the context path to /tdm in the server.xml file. Should this be placed in context.xml?
My first page in the project is called Homepage.html. To start my project I give http://localhost:5050/tdm/homepage.html
in a browser. Here I accept a username and password from the user and then do the validation in
a valid.jsp file, where I connect to the database and check and use jsp:forward to go to next pages
accordingly. However when I enter the username and password and click Go in the homepage, nothing is
displayed on the next page. The URL in the browser says valid.jsp but a blank screen appears.
WHY DOES IT HAPPEN SO? DOES IT MEAN THAT TOMCAT IS NOT RECOGNIZING JAVA IN MY SYSTEM OR IS IT A PROBLEM
WITH THE DATABASE CONNECTION OR SOMETHING ELSE? I FEEL THAT TOMCAT IS NOT EXECUTING JSP COMMANDS?
IS IT POSSIBLE?WHY WILL THIS HAPPEN?
I set the JAVA_HOME and CATALINA_HOME environment to the jdk and tomcat folders resp.
Is there any other thing that I need to set in classpath? Should I have my project as a
WAR file in the webapps of TOMCAT or just a folder i.e. directory structure will fine? -
Problem with configuring the application in websphere
Hi,
We have taken the back up of war file which was working and have deployed the same,We are using websphere as the application server due to some problem with the configuration we are getting the following error when we are trying to run the application.
Could any one please suggest on the same.
[7/22/08 5:04:30:766 EDT] 9f0473c WebGroup E SRVE0026E: [Servlet Error]-[GAServlet]: java.lang.NoClassDefFoundError: Error while defining class: com.xxrx.ga.al.GAServlet
This error indicates that the class: com.objectframe.servlet.OFServlet
could not be located while defining the class: com.xxrx.ga.al.GAServlet
This is often caused by having the class at a higher point in the classloader hierarchy
Dumping the current context classloader hierarchy:
==> indicates defining classloader
*** indicates classloader where the missing class could have been found
==>[0]
com.ibm.ws.classloader.CompoundClassLoader@1fec073f
Local ClassPath: C:\Documents and Settings\XG\Desktop\MyWorkspace\XG_Pilot\WebContent\WEB-INF\classes;C:\Documents and Settings\XG\Desktop\MyWorkspace\activation1;C:\Documents and Settings\XG\Desktop\MyWorkspace\classes121;C:\Documents and Settings\XG\Desktop\MyWorkspace\CLIENT-GDDRel40-QA.71;C:\Documents and Settings\XG\Desktop\MyWorkspace\cos1;C:\Documents and Settings\XG\Desktop\MyWorkspace\ejs1;C:\Documents and Settings\XG\Desktop\MyWorkspace\fscontext1;C:\Documents and Settings\XG\Desktop\MyWorkspace\jfoundations1;C:\Documents and Settings\XG\Desktop\MyWorkspace\JRAPI-GDDRel40-QA.71;C:\Documents and Settings\XG\Desktop\MyWorkspace\LOADER-GDDRel40-QA.71;C:\Documents and Settings\XG\Desktop\MyWorkspace\log4j1;C:\Documents and Settings\XG\Desktop\MyWorkspace\mail1;C:\Documents and Settings\XG\Desktop\MyWorkspace\MAILER-GDDRel40-QA.71;C:\Documents and Settings\XG\Desktop\MyWorkspace\mvcf-1.0.21;C:\Documents and Settings\XG\Desktop\MyWorkspace\providerutil1;C:\Documents and Settings\XG\Desktop\MyWorkspace\REPORT-GDDRel40-QA.71;C:\Documents and Settings\XG\Desktop\MyWorkspace\XG_Pilot\WebContent;
Delegation Mode: PARENT_FIRST
[1] com.ibm.ws.classloader.JarClassLoader@531728191 Local Classpath: Delegation mode: PARENT_FIRST
[2] com.ibm.ws.classloader.ExtJarClassLoader@1932756796 Local ClassPath: E:\XIP\IBM\WebSphere Studio\Application Developer IE\v5.1\runtimes\ee_v51\lib\app; Delegation Mode: PARENT_LAST
[3] com.ibm.ws.classloader.ProtectionClassLoader@723a473c
[4] com.ibm.ws.bootstrap.ExtClassLoader@3822873d
[5] sun.misc.Launcher$AppClassLoader@383fc73d
[6] sun.misc.Launcher$ExtClassLoader@3833c73d
---Original exception---
java.lang.NoClassDefFoundError: com/objectframe/servlet/OFServlet
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code))
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:446)
at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java:300)
at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
at java.beans.Beans.instantiate(Beans.java:201)
at java.beans.Beans.instantiate(Beans.java:62)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.loadServlet(WebAppServletManager.java:188)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.getServletReference(WebAppServletManager.java:455)
at com.ibm.ws.webcontainer.webapp.WebApp.getServletReference(WebApp.java:652)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcherInfo.calculateInfo(WebAppRequestDispatcherInfo.java:187)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcherInfo.<init>(WebAppRequestDispatcherInfo.java:68)
at com.ibm.ws.webcontainer.webapp.WebApp.getRequestDispatcher(WebApp.java:1462)
at com.ibm.ws.webcontainer.webapp.WebApp.getRequestDispatcher(WebApp.java:1421)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:268)
at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:182)
at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:618)
at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:443)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:672)
--- end Original exception----Hi Guillaume,
I have been "playing" with section you mentioned since yesterday, but I could reach my goal :(
An example of the problem is as following:
Manager 1 is added to both “Project Managers” and “Resource Managers”. Accordingly he is added to “My Projects” category permission.
Manager2.TeamLead1 (not a descendent of Manager 1) is added to only “Project Managers” and accordingly he is added to “My Projects” category permission.
I want (Manager2.TeamLead1)’s projects to viewable only for his Manager 2 (and the Director), not for Manager 1, because the Manager1 is not responsible for managing his work
How can I achieve that ?? :)
Thanks, -
Problem with basis support pack 12 ERP 2004s 700 release
Hi,
I am into implementing support packages. basis support package 12 implementing under dialog work process. it has strucked in middle. when i am trying to open new sessions it is going under short dump. and also before login in to system it is showing the error
"status 0020 of the user interface SAPMSYST missing"
short dump:
Runtime Errors SYNTAX_ERROR
Date and Time 10.01.2008 10:38:06
Short text
Syntax error in program "SAPMSEM1 ".
What happened?
Error in the ABAP Application Program
The current ABAP program "????????????????????????????????????????" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPMSEM1 " in include
"CL_SALV_FORM_ELEMENT==========CU " in
line 13:
"The type "IF_SALV_FORM_CONFIG" is unknown."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error analysis
The following syntax error was found in the program SAPMSEM1 :
"The type "IF_SALV_FORM_CONFIG" is unknown."
Trigger Location of Runtime Error
Program ????????????????????????????????????????
Kindly help me how to rectify this error?Hi Mahesh,
This problem what your facing is typical of implementing of support packages. Mahesh , there is a problem with the import . What you can do is reimport the Support Package thru OS level.
tp import <support patch> <sid> pf=\usr\sap\trans\bin\TP_DOMAIN_ACD.PFL tag=spam -Dclientcascade=yes -Drepeatonerror=8
After You Import Restart the Server by stopping SAP. hope this solves your problem
wish u luck and God bless u.
thanks and regards
Joel Anthony Trinidade
Points rewarded would be appreciated. -
Build shared problem with configure / config.guess
Hi,
I'm constructing some 3rd party libraries from source level with configure/automake in Suse 9.2. A common mistake in all libs is done by config.guess: it prints out "i686-pc-linux-gnuaout" which switch off the shared support at all. It's easy to workaround by print "i686-pc-linux" instead directly from configure:
ac_config_guess="echo i686-pc-linux"
Then the shared support is enabled and there left some minor problems with linker options -soname and --rpath. Then some libs can create the shared libs, for instance the apr and xml2.
Others do not, for instance log4cxx and acetao, but they do not produce any error. It looks like that simply the shared link step is not done, however the symbolic links to the release version are done. I also tryed with LD=CC and LD=cc instead of the gnu ld, but then already in config.log the shared support is not recognized. If I build by hand:
cc -shared *.o -o libACE.so
it seems to work and the result usable by applications. Since acatao includes lots of libraries to build, the manual creation is not handy / possible. So any hint to solving that are welcome. I'm using the latest sunstudio version (feb2007).
thanx rolfIt really depends on autoconf/libtool version those libs are using.
Till the most recent versions libtool had absolutely no clue that SunStudio exists on Linux. And default fallback happened to be gcc.
If you give me some specific lib (source URL or name/version) I can tell you why this lib does not configure with Sun Studio :)
Most recent version of autoconf is wize enough to handle Sun Studio on Linux. So one of the solutions for the libs might be to upgrade to a newer autoconf. Not what common user would commonly do though...
regards,
__Fedor. -
Ibooks - Problem with configuration of my iPhone. Please Restore?
I had bought a book on my iPad today .. and I sync'd it with my iPhone so I can read it on my iPhone as well .. but when I open the book it says " There is a problem with the configuration of your iPhone. Please restore with iTunes and reinstall iBooks."
anybody know what is going on?Hi Kern,
It sounds like you jailbroke you iPhone. Try restoring it and setting it up as a new device.
This article discusses that error.
WTH. -
Problem with apple support , help me plz !! don't remove my thread plzz
hello all first of all please accept my apologies for my bad english language .I'm an American who lived outside of America since childhood. i hope you understand me . i am one of the apple fans that many times i contact with apple support team for solving my itunes problems, some of supports were great But on other side there are many employee in the apple company that they just give us some PREPARED answers without thinking about what i ask them !
i want to report my problem here to get rid of those useless persons and ofcourse those weak answers in the apple company. before of explaining my problem , let me tell you a short thread:
some months ago i bought one microsoft XBOX live CODE to charge my LIVE account , i bought that from a retail store at France. Code was redeemed before i buy that , that was obvious that seller had decide to scam me with a used voucher ! and he did not accept my words and he just needed proof. so i go to microsoft.com on support section then i start talking with online chat support
please help me to solve my problem , please tell me that how i can report some one on apple?
<Edited By Host>hi bleach i explain whole the story in the post 1 but the forum moderator removed that and this time he EDIT my thread.
i bought 3 iTunes code and i want to know the date and time of redeeming, this issue happened to me manytimes in the past and each time apple support answered me with the time of redeeming of the code.
but some times some persons in apple support they don't help me and they don't give me date and time of redeeming ! and they just give me some prepaid and Irrelevant answers.
all i want to say is that many persons in apple are useless really, and we have report their weak support.
yes you are right we are all users but what we have to do when a bad person support us on the apple ?
yourself just send me a link for this matter :www.apple.com/support/contact
what i have to do on that link ?
where i have put my complaint ??
hey peoples , many support persons in apple have no any Creativity to solve our porblems . what we have to do againts of them ??
many times apple support employees tell us "I do understand how important it must be for you to know the details, but I do apologize as I won't be able to provide any more details regarding your concern."
is it giving the date and time of redeeming so hard? Why he/she can't give me more details regarding my concern BUT others can do ?? -
Problems with Configuration of AdobeInteractiveForms
Hello everbody,
I have installed/deployded
- SP11 of Netweaver Developer Studio
- Adobe Acrobat Reader 6.02
- Adobe Document Services SP 11
I have cofigured the Adobe Document Services according to the "Adobe Document Service Configuration Guide"
Everthing worked fine, except for the Installation of The Credential:
In page 24 in chapter "4.4 Registering the Password for a Credential" it says:
To register the password for a credential:
1. Log on to the Visual Administrator
2. Choose Services -> Document Services Configuration
3. select Credentials
4. Choose Browse to search for the name of the credential
When I click Browse I get the following error:
An error occured when indexing the credential files:
com.adobe.services.sap.configuration.ConfigurationException:...
org.com.CORBA.BAD_OPERATION: The delegate has not been set! vmcid:0x0 minor code:0 completed:No
Despite this problem, I have been trying to create an Interactive Form via WebDynpro. On "Deploy new Archive an run", the following error is returned in the browser:
"java.lang.NullPointerException
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.checkResponseStatus(PDFObject.java:334)
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:266)
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:209)
Another interesting effect is, that I get a 404 when calling http://localhost:50000/adobe/RegisterCredential
Calling http://localhost:50000/AdobeDocumentServices/Config is working fine.
I have tried already to undeploy and redeploy the Adobe Document Services without any effect.
Has anybody experienced the same problem?
Regards,
Andreas PutscherThanks,
Moving the shared drive into the dock solves the problem. We have worked with it over the weekend. Access to the shared drive is now responding as expected, the problems with iTunes are gone and also the info of the files and directories is working fine.
Regards -
Problem with Color Sampler Points
I'm using PSCS4 on a Mac Pro, and recently upgraded to Snow Leopard 10.6.3 from Leopard 10.5.8.
I regularly use color sampler points in Photoshop when adjusting curves. I seem to be having problems getting a sampler point to show up in the info palette when shift-clicking with the eye-dropper tool, or directly using the color sampler tool. I've also tried shift-clicking from within the Threshold command, but the points I click just don't seem to take a sample and show up. I never had this problem before. I'm bringing RAW, sRGB and ARGB digital images into PS from Bridge, and have tried 8 and 16 bit.
After trying for awhile, sometimes it just suddenly starts working again. For instance, I was writing this post after not being able to get PS to take samples. Then I went back and forth between the internet and PS, and it started working all of a sudden. Very odd.
Anyone else seeing this? Am I doing something wrong? Any workarounds?
Thanks, LouThanks, Mark. You may be right, and I will try it.
I have my workspace setup saved, but I presume it is lumped in with all the other preferences. Is there a way to "Export" my saved workspace setup from Photoshop, so after I trash my preferences, I can reimport at least my workspace? I didn't see the ability to do that, but it may be hiding somewhere. I like my current dual monitor setup and prefer not to have to 'redo' it from scratch.
Thanks,
Lou -
Problem with configuration settings.
I have a Nokia 3110 classic .Recently I had a problem with Personal Configuration settings .
When I want to add new App types it displays "Cannot add new account.Memory Full."
So I also cannot be able to save Configuration settings as it displays"Only 70 sets allowed.Settings discarded".
So please help me.
Solved!
Go to Solution.A workaround is available on internet, Not on this forum. But i am afraid i am not allowed to post it here.
Try to Google this keyword " Only 70 sets allowed.Settings discarded"
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4 -
Problems with technical support in Argentina
Hello,
I'm having a bit of trouble with my "AppleCare Extended Service" here in Argentina, and I wondered if someone was kind enough to help me understand.
I've recently had problems with my MacBook Pro's HD. It just died. I had to connect my laptop to another Mac, and use Disk Warrior in Target Disk mode to recover my info.
After that, I tried formatting my HD in Target Disk Mode using Disk Utility, so that I could reinstall the system. No luck, it whould just show error messages, and sometimes it would not even show up at all.
I also tried booting my MBP from the DVD but it would not read the DVD at all for some reason.
Anyway, my real problem is that I have "AppleCare Extended Service" so I imagined it would be just about replacing the HD. I took the laptop to an official reseller, which offers support. They told me I was covered by the guarantee.
A few days later I get a call, and they tell me that they have to charge me around $50 because my HD is ok, and the guarantee does not cover the software. I told them I didn't ask for any changes to the software, and they told me it was either $50 to fix it, or $20 to get it back untouched.
I got a few emails from the technician explaining to me that the MacBook Pro was OK, but after a few mails back and forth, he told me that the computer had a defective DVD drive, covered by guarantee, and "serious communication problems" between the vram and other devices, which required a firmware update that was not covered by the guarantee.
After fighting a bit over the emails, he told me he was going to replace the optical drive, but put back the original firmware, and charge me nothing for it. But he also said my disk won't work with this original firmware.
Please forgive my very long explanation, but I just wanted to know if this sounds like correct procedure, or if it sounds odd to you as it sounds to me.
Is there any official channel to raise complaints about the way this is being handled?
Regards,
DiegoYou need to call AppleCare and speak to a customer representative. This is a forum with users like yourself. Apple is not here.
-
Problems with language support (interpunction)
Hi, i am writing screenplays in slovak language and i have encountered a serious problem with interpunction in Adobe Story. There are few letters that are not working. Concretely ľ,š,č,ť,ž. Other ones in the same row (ý,á,í,é) are working correctly. Please correct me if i am doing something wrong but i couldnt figure out solution to this problem alone so i am writing here. My tools: Win7, current version of Google Chrome, online version of St (standalone app has the same issue). Are you planning to fix this issue and if then when? I am using different solution to writing scripts, Adobe Story looks definitely better but without proper interpunction i cant use it. Thanks for answer.
Hi,
ES is the Language for spanish..But the Flat file should have to represent 'S' for Spanish.
Check in Table T002 for the symbols which represent Languages and that to be used in flat file.
Maybe you are looking for
-
Hi , This is the first time I am doing OOPS ABAP Program. I am trying to convert the new HR-ABAP report which I have developed in the procedural way into OOPS ABAP.It is a HR Report.So it is using PNP Logical database. But in OOPS ABAP, it
-
IPod Classic and iHome, alarm feature is not available!
yeah, the most important feature to the ihome (even the latest version, iH8) is not available with the new ipods. i know mine works because i used to have the 30gb video. here are my troubleshooting specs: scenario 1: -set the alarm for a minute late
-
Frozen screens - iPod with dock connector
My ipod freezes up whenever it is disconnected from the computer. The Ok to disconnect doesn't go away. If I perform a reset, the apple logo doesn't disappear. I have restored my ipod many times to no avail. I can synch songs to it, and even play the
-
Hi all, i've integrated the Sample gyroscope ANE from here http://www.adobe.com/devnet/air/native-extensions-for-air/extensions/gyroscope.html inside my app. Basically, this will be a retro race game ( similar to OutRun ) , with the possibilyt to dri
-
AkAttachmentCategory sort order
Hello! I tried to change sort order of drop-down menu form ASC to DESC. But with no results. By dafault sort was disabled so I changet it to descendig, but nothing changed. <customization xmlns="http://xmlns.oracle.com/jrad" version="9.0.5.4.89_560"