Problem with Connecting to VPN after migrated to snow leopard

Hi,
I recently migrated to Snow Leopard server, I have a strange issue when connecting to the VPN Server.
Please find the below error.
Fri Jan 1 14:38:22 2010 : CHAP peer authentication succeeded for jasmine
Fri Jan 1 14:38:22 2010 : DSAccessControl plugin: User 'jasmine' authorized for access
Fri Jan 1 14:38:22 2010 : MPPE required, but keys are not available. Possible plugin problem?
Fri Jan 1 14:38:22 2010 : sent LCP TermReq id=0x2 \"MPPE required but not available\"
Fri Jan 1 14:38:22 2010 : Connection terminated.
Fri Jan 1 14:38:22 2010 : Connect time 0.0 minutes.
Fri Jan 1 14:38:22 2010 : Sent 0 bytes, received 0 bytes.
Fri Jan 1 14:38:22 2010 : PPTP disconnecting...
Fri Jan 1 14:38:22 2010 : PPTP disconnected
2010-01-01 14:38:22 IST --> Client with address = 192.168.1.76 has hungup
Please let me know what is the cause and how can i fix it.
Thanks,
Gulab Pasha

More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
http://captaindbg.com/how-to-update-drivers-on-windows-7/ (works on win 8 too)
Wanikiya and Dyami--Team Zigzag

Similar Messages

Problem connecting with VPN after migrated to SNOW LEOPARD SERVER,

Hi,
I recently migrated to Snow Leopard server, I have a strange issue when connecting to the VPN Server.
Please find the below error.
Fri Jan 1 14:38:22 2010 : CHAP peer authentication succeeded for jasmine
Fri Jan 1 14:38:22 2010 : DSAccessControl plugin: User 'jasmine' authorized for access
Fri Jan 1 14:38:22 2010 : MPPE required, but keys are not available. Possible plugin problem?
Fri Jan 1 14:38:22 2010 : sent LCP TermReq id=0x2 \"MPPE required but not available\"
Fri Jan 1 14:38:22 2010 : Connection terminated.
Fri Jan 1 14:38:22 2010 : Connect time 0.0 minutes.
Fri Jan 1 14:38:22 2010 : Sent 0 bytes, received 0 bytes.
Fri Jan 1 14:38:22 2010 : PPTP disconnecting...
Fri Jan 1 14:38:22 2010 : PPTP disconnected
2010-01-01 14:38:22 IST --> Client with address = 192.168.1.76 has hungup
Please let me know what is the cause and how can i fix it.
Thanks,
Gulab Pasha

Did you turn on the Printer Sharing in the "Share" preferences panel?
And, for Windows computers to access your printer, they need to install "Bonjour for Windows", which is a part of the iTunes+Quicktime install package, I believe.
Alternatively, you can turn on SMB sharing on your Mac, which is also in the "Share" preferences panel. You first highlight and turn on "File Sharing", then there is an "Options..." button to the right, clicke it and check the checkbox of "Share files and folder via SMB (Windows)".

Problems with wireless mouse/keyboard after upgrade to snow leopard

Hi!
I am wondering if someone has some insight for me. I recently upgraded to Snow Leopard from Tiger. I have been using a Logitech S 530 wireless keyboard/mouse combo for a few years. I am now having problems with them irratically.
1. When on line and the page is large, I often cannot move the blue bar at the bottom of the screen to scroll to the right. What happens is like a stutter; as I am dragging the bar, it and the page shake rapidly side-to-side. Sometimes, I can drag it to the right, but as soon as I let go, it snaps back to the left. This does not happen in Word.
2. When in boxes with dropdown options, only occasionally does that happen. The dropdown either doesn't show, or it flashes quickly. Sometimes it will work after clicking many times. This happens with dropdown menus as well as search boxes that have dropdown choices for previous searches or suggested searches a la Google.
3. When I use my function key or mouse to display all windows, I can't choose the one I want. Regardless of which one I put my cursor over, only the left-most one is highlighted and comes to the front when I click.
4. There is a varying lag. Sometimes the system is responsive, and other times there is a lag of varying lengths before the system responds to the mouse action (click, drag, zoom, etc.)
5. For a while, my left mouse button wouldn't work. I reconfigured it, that seems to have done the trick.
6. Today, I can't open any of the menu items on Firefox. I can move the cursor there, but when I click on any of them, nothing happens. This is okay in Safari.
I have disconnected and reconnected the usb, restarted the computer, and tried to reinstall the software for the mouse and keybord. When I did that, I got a message saying it couldn't install on the current OS, so I went to Logitech and dowloaded and installed the latest version (which indicated it is for OS X 10.6.8.)
I don't know if this is a Snow Leopard problem, but it started sometime after I upgraded. Thanks in advance for any help!
Donna

Update all your third party software or uninstall and reinstall 10.6 versions.
If your going to 10.7, be warned a lot of software will not work at all and your 10.5 era machine will be slow, perhaps even have problems as 10.7 is problematic on older hardware.
http://roaringapps.com/apps:table
IMO save for a new 10.8 machine after this summer.
See #1-15 here, tune yourself up good.
 Step by Step to fix your Mac

Please help, after migrating to snow leopard Server my VPN is not working

Hi,
After migrated to Snow Leopard Server, my VPN settings are not working, My users not able to connect to VPN.
Please find below log. Please let me know the solution for it.
2010-01-05 13:19:32 IST Incoming call... Address given to client = 192.168.1.72
Tue Jan 5 13:19:33 2010 : Directory Services Authentication plugin initialized
Tue Jan 5 13:19:33 2010 : Directory Services Authorization plugin initialized
Tue Jan 5 13:19:33 2010 : PPTP incoming call in progress from '95.222.205.164'...
Tue Jan 5 13:19:33 2010 : PPTP connection established.
Tue Jan 5 13:19:33 2010 : using link 0
Tue Jan 5 13:19:33 2010 : Using interface ppp0
Tue Jan 5 13:19:33 2010 : Connect: ppp0 <--> socket[34:17]
Tue Jan 5 13:19:33 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x2794ebf2> <pcomp> <accomp>]
Tue Jan 5 13:19:34 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x29205274> <pcomp> <accomp>]
Tue Jan 5 13:19:34 2010 : lcp_reqci: returning CONFACK.
Tue Jan 5 13:19:34 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x29205274> <pcomp> <accomp>]
Tue Jan 5 13:19:36 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x2794ebf2> <pcomp> <accomp>]
Tue Jan 5 13:19:36 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x2794ebf2> <pcomp> <accomp>]
Tue Jan 5 13:19:36 2010 : sent [LCP EchoReq id=0x0 magic=0x2794ebf2]
Tue Jan 5 13:19:36 2010 : sent [CHAP Challenge id=0x8d <620015595e4967664c1310241b4b3254>, name = "nova.thecoverstory.com"]
Tue Jan 5 13:19:36 2010 : rcvd [LCP EchoReq id=0x0 magic=0x29205274]
Tue Jan 5 13:19:36 2010 : sent [LCP EchoRep id=0x0 magic=0x2794ebf2]
Tue Jan 5 13:19:36 2010 : rcvd [LCP EchoRep id=0x0 magic=0x29205274]
Tue Jan 5 13:19:39 2010 : sent [CHAP Challenge id=0x8d <620015595e4967664c1310241b4b3254>, name = "nova.thecoverstory.com"]
Tue Jan 5 13:19:40 2010 : rcvd [CHAP Response id=0x8d <c68742dc9457be5a61e444f00f53371d000000000000000044c6f89fa49ed8bf4c17a2861a2cfd 04ae1e6b9199527f9f00>, name = "jenny"]
Tue Jan 5 13:19:40 2010 : DSAuth plugin: Error -25300 while retrieving key agent password from the system keychain.
Tue Jan 5 13:19:40 2010 : DSAuth plugin: Could not retrieve key agent account information.
Tue Jan 5 13:19:40 2010 : sent [CHAP Success id=0x8d "S=B503F226B4DE4105A4711C0EA2E7C21B1A9A935D M=Access granted"]
Tue Jan 5 13:19:40 2010 : CHAP peer authentication succeeded for jenny
Tue Jan 5 13:19:40 2010 : DSAccessControl plugin: User 'jenny' authorized for access
Tue Jan 5 13:19:40 2010 : MPPE required, but keys are not available. Possible plugin problem?
Tue Jan 5 13:19:40 2010 : sent [LCP TermReq id=0x2 "MPPE required but not available"]
Tue Jan 5 13:19:40 2010 : Connection terminated.
Tue Jan 5 13:19:40 2010 : Connect time 0.2 minutes.
Tue Jan 5 13:19:40 2010 : Sent 0 bytes, received 0 bytes.
Tue Jan 5 13:19:40 2010 : PPTP disconnecting...
Tue Jan 5 13:19:40 2010 : PPTP disconnected
2010-01-05 13:19:40 IST --> Client with address = 192.168.1.72 has hungup
Thanks,
Gulab Pasha

Great !! save my trouble too
thanks a lot for the tip.

Mail "unexpectedly quits" after migration from snow leopard to new iMac running Mountain Lion

Mail "unexpectedly quits" after migration from snow leopard time machine files to new iMac running Mountain Lion. I can run connection doctor OK. But the activity window is blank. If you try to open message viewer window then mail program crashes. Would really like to get my old emails back as the old imac is totally dead. Thanks for any help.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Problem with Backup 3 (3.1.2) under Snow Leopard

Okay so I use Apple's Backup 3.1.2 which is free to all .Mac members as you know to back up all of my Macs to a NAS (networked drive). Anyway, under Snow Leopard this stops working. When you try to tell it to save the back ups on a mapped or mounted network drive it will not let you choose it and defaults back to the Macintosh HD. Under Leopard it had no problem doing this. What is interesting is that if I reinstall Backup 3 it will start to work and allow me to save to the network drive but as soon as Backup tries to do its backup by it self AND if the network drive is not mounted for some reason (has to be mounted manually), BackUp breaks the save point with the NAS and you can not tell it to save to the NAS again. As you also probably know everytime you restart your mac all the mounted network drives are not connected until you manually open them your selves. Under Leopard Backup would actually say "Waiting for Christian_BackUp" until I would open it and then it would start the backup automatically. Please help me get this working...I can not use Time Machine because I need a smooth, reliable, and working way to back up to a NAS.
Thanks for your help in advance!
PS: I have confirmed this problem on three macs all running Snow Leopard with different NAS setups.

Whenever I put my Mac to sleep Backup 3.1.2 stops running scheduled backups to my iDisk automatically. This behavior started only after I installed Snow Leopard. They always ran just fine under Leopard whether I had put my iMac into sleep mode or not. If I reboot now and never put my computer into a "hard" sleep the automatic backups work fine, but as soon as I manually select "Sleep" mode the automatic backups stop happening even if the computer is awake when the backups are scheduled to occur.
Message was edited by: Joseph Snodgrass

Iphoto wont start after migration from snow leopard to mountain lion

Hello everyone hope you can help me, I've migrate from Snow Leopard to Mountain Lion and my IPhoto (8.1.2) won't start, I cant reinstall from app store because it came with the copy of Snow Leopard already instaled on my Imac...And I cant find the original Disc, so anyone can help ? felling desperate...

You should be able to Software Update and that will bring your iPhoto up to date.
iPhoto was 9.2.3 at 10.6.8, so I don't know why yours was stuck at 8.1.2
However you can stick the #2 10.6 disk into your machine and should be able to run the bundled app installer.
If that doesn't work there is Pacifist from CharlesSoft that you can extract iPhoto and replace your corrupted one, then run Software Update to bring it current.
Once you have replaced iPhoto, rebuild the database
https://support.apple.com/kb/HT2638
If your still having problems, perhaps a user account or drive permissions issue
..Step by Step to fix your Mac

Problem with 8.1.6 after migrating to Tru64 5.1A

We just migrate our OS from Tru64 4.0G to Tru64 5.1A.
Our database are 8.1.6.3.1.
After migration the OS we had problem (ORA-07445) with some of our database. It seems that the problem is related to direct IO and a workaround is to set the DISK_ASYNCH_IO parameter to FALSE.
What is the impact of setting this parameter to false ? Should I expect a big decrease in performance ?
Does anybody know if there is a patch for Tru64 5.1 that woudl correct this problem ?
Thanks

After having a closer look at metalink it seems to be obvious, that Forms 6i (8.0.6.) only supports user exits generated with the 8.0.6. precompiler.
If this is the case new questions follow:
Is there a way to get a 8.0.6. precompiler?
Is it possible to connect to a 8.1.5. database with such a user exit? Does anybody have corresponding experiences?
Our customer uses a 8.1.7. database. What about connecting to that database with the user exit?
/Ralph

Problems with connecting to internet after power loss w WRT54G v3

I'm having problems connecting to the internet after a power loss with my WRT54G v3 wireless router. I'm at the latest firmware version (4.21.1).
I found similar problems with the V2 version of this router.
After a power failure, I can access the http interface to the router,all of my settings are there (not set to factory settings),the unit is connected to my ISP provider,I can ping from the router, but none of my wired or wireless PCs can ping.
To "fix" this condition, I have to reset to factory settings, then re-load my saved configuration.This usually works, but sometimes I have to hard reset the unit.
Anyone having this problem? Anyone have a fix?

Sudden loss of power for extended periods of time will 9x out of 10 will corrupt the saved configurations and can only be fixed in the way you already described.
A solution for this is getting an UPS incase of a power failure your equipment will be on battery back up until either the battery runs out or power is restored (depending on the model changed the battery time)
With Knowledge… Impossible means nothing.
Credentials
Computer experience: 11 years
Cisco networks experience: 8 years
Network administrator: 6 years
N.E.T. networks experience: 6 years
Linksys networks experience: 6 years
Recent additions: A+ | Networks+ | Linux+ | Security+

Problem with Java Native Type after Migration from 7.0 to 7.1

Hi,
after Migration from Netweaver 7.0 to Netweaver 7.1 I get following error:
FileDownload 'FileDownload.data': Context attribute 'PrintSelectedView.PdfToDownload.resourceInputStream' has the Java native type 'com.sap.tc.webdynpro.progmodel.api.IWDInputStream' and cannot be bound to this property. Hint: Remove the binding or bind a context element matching the property's type.
What have I done wrong?
How could I fix this problem?
Best regards,
Peter

Hi,
thanks, this solved the problem.
Thank you.
Best regards,
Peter

Problems with new iMac (Alu) after Migration with the Bluetooth settings

Hallo, at first, apology for my bad English
I have bought a new iMac 24". After Migration of my datas from my "old" one (iMac 20" C2D) it works all very fine. The only thing that don´t work is the Bluetooth Settings. When i want to install a new device, there is no text in the Window, only a few characters...
Can anyone help me??

Try downloading and installing the 10.4.10 Combo update. Let the update run alone. Don't use the Mac for anything else while it installs the update, including Airport and Bluetooth. Use a wired keyboard and mouse if you can.
Mac OS X 10.4.10 Combo Update v1.1 (Intel)
Repair Disk Permissions after the update is installed and you have restarted the Mac.

ITunes, iPhoto and system clock crash after migrating from Snow Leopard

Hello everyone,
I had MacBook Pro with Snow Leopard but had to migrate to older one with 10.5.8 today.
After 4 hours it finished and everything seems fine except 3 things:
1. iTunes crashes on each launch attempt. I even followed an article to uninstall it, got a new one from apple.com but I still have the same issue.
2. iPhoto opens with success and shows folders overview, but when I click to enlarge a photo I get a blank screen. After about 2 minutes the program quits unexpectedly.
3. System clock behaves really strange. It seems to ignore time zone settings completely. I select Melbourne, Australia and quit Sys preferences but when I get there back I still have GMT time. Setting manually gives me nothing - time of email is still GMT.
Anyone have seen similar problems after migrating? My primary guess is that this issues are caused by migrating to older Mac OS version, but maybe it's not the point. Anyway, would be great to have this fixed. Without iPhoto, iTunes and proper times in e-mail inbox my Mac is pretty useless...

I installed this update, restarted but nothing helped. By permissions - what do you exactly mean, how could they change or what could be broken?
I also noticed that what is broken as well are the PYM Player and Quick Time. When I open a movie, I got the sound but no video output at all. It is similar to iPhoto where I see the miniatures but normal size viewing goes blank.
Does anyone has a clue what can be broken that causes such problems?
My Mac is now really just an e-mailing and surfing machine...

Connecting to server after upgrading to Snow Leopard

I'm trying to connect to a hard drive wirelessly which is connected to a router. I used to have Leopard and connected fine by going Finder > Connect to Server and inputting:
smb://FND/Media
Since upgrading to Snow Leopard I haven't been able to connect. I've tried connecting using the same address as above and also with:
smb://192.168.1.11/Media
Both open a dialog box asking for user name and password. As no password is setup just hitting enter should work (it did on Leopard). However, this time it brings up an error message saying:
Connection Error
There was an error connecting to the server “192.168.1.11”. Check the server name or IP address, and then try again.
If you are unable to resolve the problem contact your system administrator.
Also when trying to browse for the server it doesn't appear. I'm not sure if it did on Leopard as I never needed to look for it. I can get into the hard drive by typing the IP address into Safari, but just can't connect to it.

First, make sure caps lock is not on.
Another reason why your password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. At the login screen, you can cycle through the available layouts by pressing the key combination command-space or command-option-space. See this support article.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

Lost pictures in iWeb after migration to Snow Leopard

Dear Forum,
I recently upgraded my MacBook by inserting 4 GB RAM, a 500 Gb harddisc and a brand new snow leopard. Before I did this, I made a full time machine backup, so I would be able to get back to my initial state asap. This proved to have worked for everything, except for iWeb as I discovered yesterday evening:
All my sites and pages are still there, and even the pages with published videos are still intact, but none of the pictures (and this is infact the main content of my web page) do show...
All pictures are still in my iPhoto library so i did not expect this. Also all pages are now labeled as 'changed' so my next publishing routine would take forever (given the fact that I get all my pictures back) because I publish our Kindergarten pictures since 2005 through this site.
Any suggestions? Where does iWeb store the information about where to find those pictures?
Any help would be highly appreciated!
Thanks in advance!
Petra

Dear Old Toad,
I tried the first part of your suggestions, but no luck there. But doing so I suddenly thought of the fact that the situation has one other quite important issue I did not think of before:
My iPhote library and all the pictures used to be on a volume that was once the internal hard drive of my iMac that died two years ago. Since than I used this hard drive as an external drive for my MaBook (keeping the original user/pictures/ structure it always had.
After upgrading my MacBook I finally had enough room to store all material on the internal hard drive.
So I copied the content of my external Picture folder to the Picture folder of my hard drive. I use the same user name and after disconnecting the external drive I renamed the internal hard drive to the same name as the external and before the iMac used to have (iMac HD). After launching iPhoto all pictures where there and could be found in the finder by iPhoto so everything was fine so far. The same thing worked for iTunes. Only iWeb proves to have a problem. Do you still think the last part of your suggestions could work?
I tried reconnecting the original external disc, and if I do that, all pictures are visible as they used to be. The iPhoto library available in the media area is still the one from the internal hard drive though.
So, now you have the whole picture... any suggestions? Would there be a way to kind of import all pictures from the external drive into the iWeb file? I do not understand why some pictures (for the events and the blog pages with a video file on it) are stored within the package and others (all the picture pages) are not...
Thanks for any kind of advice!
Petra

Trouble with Safari and keychain after upgrade to Snow Leopard

I just upgraded from Leopard to Snow Leopard. Previously in Safari (with Leopard), when logging in to a website, I entered the first character of my login and, depending on the settings in Keychain, the login/password was autofilled or I was prompted for my Keychain Access password and then it autofilled. This worked great because no one could use my laptop and be able to log in to sensitive websites without my Keychain Access password. And, because I have multiple accounts on some websites, I could choose which login ID to use based on the first character. I don't know if Safari was set to autofill or not, but I suspect not because I never wanted autofill.
After I upgraded to Snow Leopard, Safari would not connect to Keychain at all. I figured out I had to check Safari's autofill User Names and Passwords box in order for it to recognize Keychain. But now it autofills whenever I land on a website login page, even though the Keychain items are set to require my Keychain password. Further, for those websites that have multiple accounts, Safari is autofilling the one that is first listed in Keychain.
What do I need to do for Safari to use Keychain Access without immediately autofilling (like it did with Leopard)?

Yes, thank you. I have done that on most of them and it works well. My frustration is that the autofill in Safari seems to be the only way to engage Keychain. When I don't select autofill in Safari, I can't engage Keychain at all (without manually opening it and viewing an individual key). I'd like to be able to activate Keychain selectively as I did in Leopard.
For those sites where I have multiple accounts, I have discovered that if I deny the first pop-up from Keychain, I can then delete the autofilled login and enter the first character of the one I want, and the pop-up appears again. It's just frustrating to have to take those extra steps.

Problem with Connecting to VPN after migrated to snow leopard

Similar Messages

Maybe you are looking for