Problem with connecting wirelessly

I'm using the linksys wrt54gs with a motorolla cable adapter to connect to cox internet. Right now I am typing on the computer that is connected physically to the linksys. The problem is that all my wireless devices have lost wireless connection at same time, 2 computers and ps3. I tried other deivices that connects wirelessly and they either don't connect or connect and say not internet avialbe. This problem was worse last time it occured because that time my main computer had to be connected straight to the motorolla. I am using LInksys easylink advisor and it shows a green line (internet that only goes to the desktop but shows a gray line to the other computers. This has happened a few times before and is there anything that can be done to avoid this in the future? The firmware on the router has not been upgraded at all

It is always recommended to upgrade/re-flash the firmware on the router.So, first upgrade/re-flash the firmware on the router and then check the connection on the computer.

Similar Messages

Problem with connecting ipad 2 with crestron cp2e...help plss its urgent... I hv a ipad 2 with mobile pro g connected with cp2e. when i pressed any button in ipad its connet with cp2e but after 4-5 sec one error comes (warning wifi was powered off while t

problem with connecting ipad 2 with crestron cp2e...help plss its urgent...
I hv a ipad 2 with mobile pro g connected with cp2e. when i pressed any button in ipad its connet with cp2e but after 4-5 sec one error comes (warning wifi was powered off while the device was in auto -lock(sleep)press connect to reconnect) when i pressed again its connected with cp2e. i am using netgear wireless access point . i also has been changed access point as well as updated ipad firmware bt problem is as it is .. pls help.

Hi have you solved the issue ?
Cause I have the same problem.
Tnx

I am having problems with connecting to my router wireles...

I am having problems with connecting to my router wirelessly. How do I determine my access point's network key?

Follow this from a computer already connected: 1. Open setup page of router by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name. Use your password if you have changed it earlier. 2. Go to wireless tab. 3. Go to wireless security sub-tab. 4. If security mode is wpa or wpa2 note down pass phrase/shared key, if security mode is WEP note down wep key number 1. This will be your network key.

Pls help me.i have a problem with WRT54G wireless router.

Dear all, Now i got face some problem with WRT54G wireless router.The problem is after i connect to the internet...the wireless will automatic drop..is that any ppl here got face this and got any solution to solve it...?thanks for sharing..

hi...logon to router's setup page and try changing channel to 11, go to advanced wireless settings, try changing transmission rate to 54Mbps, beacon interval to 50, fragmentation and RTS threshold to 2304, also try upgrading latest firmwar on the router...check whether it maks any difference or not and let me know.

A problem with the wireless profile

[nikos@dell ~]$ sudo netctl stop Nexus
[nikos@dell ~]$ sudo netctl start Nexus
Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
[nikos@dell ~]$ journalctl -xn
-- Logs begin at Sun 2014-08-24 18:22:31 EEST, end at Wed 2014-08-27 15:55:28 EEST. --
Aug 27 15:55:23 dell sudo[4263]: pam_unix(sudo:session): session closed for user root
Aug 27 15:55:28 dell sudo[4269]: nikos : TTY=pts/0 ; PWD=/home/nikos ; USER=root ; COMMAND=/usr/bin/netctl start Nexus
Aug 27 15:55:28 dell sudo[4269]: pam_unix(sudo:session): session opened for user root by nikos(uid=0)
Aug 27 15:55:28 dell systemd[1]: Starting Automatically generated profile by wifi-menu...
-- Subject: Unit [email protected] has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit [email protected] has begun starting up.
Aug 27 15:55:28 dell network[4275]: Starting network profile 'Nexus'...
Aug 27 15:55:28 dell network[4275]: The interface of network profile 'Nexus' is already up
Aug 27 15:55:28 dell systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
Aug 27 15:55:28 dell systemd[1]: Failed to start Automatically generated profile by wifi-menu.
-- Subject: Unit [email protected] has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit [email protected] has failed.
-- The result is failed.
Aug 27 15:55:28 dell systemd[1]: Unit [email protected] entered failed state.
Aug 27 15:55:28 dell sudo[4269]: pam_unix(sudo:session): session closed for user root
[nikos@dell ~]$ netctl list
* wlp2s0-Nexus
[nikos@dell ~]$ sudo ip link set down wlp2s0
[nikos@dell ~]$ sudo netctl start wlp2s0-Nexus
the above solved the problem but i dont understand why this probelem emerges after each reboot forcing me to regive these commands each time.
How can i entirely fix it and what is causing it?
and a 2nd issue is the 'pacman -Syy/u' fails each time to find a sinle one workin g mirror so i cannot update/upgrade

Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting

Problems with Verizon Wireless BlackBerry Tour BlackBerry OS 4.7.1.61 update:

Problems with Verizon Wireless BlackBerry Tour BlackBerry OS 4.7.1.61 update - I was anxious to download the update to see if it addressed the sticky trackball problems and the low volume issue when using a blue tooth device. However, in the process of updating my BB Tour yesterday, the install stopped on the 8th out 12 updates. After a couple of 'retrys', the BB error message on the desktop came up which instructed me to: i) disconnect the device, ii) restart the computer. iii) restart the loading process and, iV) restore my data by loading the loader back-up file using Restore. Unfortunately my Tour was left without any software and the Desktop manager couldn't recognize it. The error message on the Tour was 503. Called Verizon Wireless tech and bottom line, the only fix is a new Tour, which they're sending me. Anyone else having issues with the update? Also, does it address the trackball and blue tooth issues?

I had issues with the trackball and had to have my Tour replaced. I was told this model does not have a removable trackball so the entire phone has to be replaced. My current one is working OK but does stick a bit. Seems to get worse over time. My wife's tour is newer and so far she is not experiencing the problem. Have not experienced a problem with the Blue Tooth volume.
I have another issue with this upgrade that I am wondering if anyone else has seen. My wife has the Tour as well. She was prompted to do the upgrade and went through it. It appeared to work except it blew out her Contact Alerts. When we put them back in we can no longer get the sound to play when she receives an SMS message in her holster. Vibration works but doesn't do any good when it is in her purse. Phones calls, calendar alerts, alarms all work in holster. As soon as we delete the contact alert the default SMS alert will play in the holster. If she takes her phone out of the holster the Contact alert will play. My phone is still running 4.7.1.40 and this function works fine. I am thinking about trying to put her's back to my version if possible but not sure the best way to go about this

Problem with connecting and syncing (quicktime.qts)

Hi,
I have a problem with connecting and syncing my Iphone to itunes.
iphone alone on PC -> uploading files (fotos) is possible
itunes starts normaly, if iphone is not conected.
if i connect iphone after starting itunes, or if i start itunes after connecting iphone i get an itunes-error with message:
AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
ModVer: 7.65.17.80 Offset: 00909a47
i test different things...
- used another USB-port
- used another PC
- used macbook of my wife instead PC
- deinstalled and new installed of itunes (older and newer versions) folow tutorials of apple
- use another USB-Cable...
I'm resigned, Please help me..
Tom

AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
In this context, that can sometimes indicate trouble with a content file on the phone (or Touch).
Do you have any podcasts stored on the iPhone at the moment? If so, if you delete them from the phone, can you connect to iTunes without the error?

HT204053 I have a problem. I bought Pages and Numbers for my iMac and so far everything was OK. Suddenly i have a problem with connection to iCloud. Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded in iCloud.

I have a problem.
I bought Pages and Numbers for my iMac and so far everything was OK.
Suddenly i have a problem with connection to iCloud.
Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded to iCloud. There is a sign (small shape of iCloud), that they are waiting to be uploaded to iCloud.
I think the iCloud is OK.
i can see and manage documents in iCloud. i can create them on iPad and see them and delete them in iCloud.
But not on iMac.
i dont know what has happened and I am not abble to find the solution. It was OK till some days ago….

I have a similar problem! Everything stopped working after upgrading to Mac OS 10.8.4 through the App Store. Help!

Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

Hi
I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
Thanks Portozzygirl

More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
http://captaindbg.com/how-to-update-drivers-on-windows-7/ (works on win 8 too)
Wanikiya and Dyami--Team Zigzag

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

1. Download the iOS 5.0.1: http://www.tobias-hartmann.net/2011/11/download-ios-5-0-1-veroffentlicht-direkte -downloadlinks/
2. open itunes,Click in iTunes while holding down the Shift key (on Windows) or Alt key (Mac) to restore and firmware

How do I get connected to a server on my network via an IP address? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

Some of the following is going to use some technical terms — this area is inherently somewhat technical.
If you don't understand some part of the following reply, please ask.
Is this your own OS X Server system on your own network, or is this some other server within some larger organization?
You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured. This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
http://10.20.30.40
UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share. That's used if you're connecting to an Apple storage service somewhere on your network. You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server. (There can be additional requirements for connecting to Windows Server systems, too.)
If there's local IT staff available here, please contact them for assistance. If these are your own local systems and your own local OS X Server system, then some information on the server will be needed. (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.)

Problem with connecting to DB2 from ADFBC

I have a problem with connection to DB2 data using ADF BC components. Everything looks fine till I run the page(JSF) to see the data of a db2 table. I created a read only view object. This view is registered in the AM and from AM the view is returning the rows without any problem. But when I am running the page which has the view as a table these errors are thrown. Please help me to fix this.
JBO-30003: The application pool (od.mft.views.MFTServiceLocal) failed to checkout an application module due to the following exception:
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002)
## Detail 0 ##
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
at oracle.jbo.pool.ResourcePool.useResource(ResourcePool.java:336)
## Detail 0 ##
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:545)
## Detail 0 ##
oracle.jbo.DMLException: JBO-26061: Error while opening JDBC connection.
at oracle.jbo.server.ConnectionPool.createConnection(ConnectionPool.java:220
## Detail 0 ##
java.sql.SQLException: No suitable driver
at java.sql.DriverManager.getConnection(DriverManager.java:545)
Thanks
Gangs

Steve, the tester works good as expected and its retreiving the rows. As I said earlier the problem is with the JSF page when I ran the page on Embeded Oc4j of Jdev the page showing the above. The exception does not show on the console.
Please let me know if you need any more details.
thanks
Gangs

Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth, Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth

Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth, Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth

Hello NiiTeye,
I'm sorry to hear you are having these issues with your iPhone. If you are having issues connecting to your car stereo via Bluetooth, you may find the troubleshooting steps outlined in the following articles helpful:
Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
iOS: Troubleshooting Bluetooth connections - Apple Support
Sincerely,
- Brenden

Problems with connection to the Mountain Lion

Someone is having problems with connection on Mac Mountain Lion? I did a clean install and the connection is unstable.

Have you tried to reset your network settings ?
What I would do is delete the connection, and then retry the set up of that connection.
System Preferences>Network, select Wi-Fi on the left and then click on the 'minus' button

Contribute 3: Problem with Connection Key

Hi,
I'm having a problem with connecting Contribute 3 to our web
site.
I have Contribute running on two PC's, one running XP Pro
Service Pack 1 and the other Service Pack 2, the one with SP 1 is
at home and connects fine. I used this one to generate a connection
key for my office computer (the one with SP2). Everything should be
fine, but it isn't.
The office PC refused to connect to the site: After double
clicking on the connection key and selecting Open, it presents a
dialog box with the name: Import Connection Key, and I enter a new
username, email and the password for the connection key.
When I click OK, it presents the following message: "Unknown
host. Contribute could not find the server "ftp.myhost.com". Please
check your connection information or contact your administrator."
When I click OK on this dialog box, it presents the following
dialog box: "Contribute could not verify your connection key. A
network connection to the server could not be established. Please
contact your administrator for assistance." Damn,I'm the
adminstrator and I have run out of ideas!
I can connect to the site with WS_FTP without any problems,
but I cannot do so with Contribute, neither with the connection key
containing all the FTP details, nor bypassing the connection key
and simply manually entering the FTP details.
What is going on

which windows version do you have?
connect your phone to your PC > disable your firewall and antivirus > your PC should download the drivers also you might want to try SUS
Update Service (SUS)
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Problem with connecting wirelessly

Similar Messages

Maybe you are looking for