Problem with connection to the driver
the gpib primary address is not correct when i plug in the usb/gpib interface-Agilent 82357A.How to set the primary address?I m using labview 6.1. There is an error like get module status.vi keep pop out at error out dialog box when i run the program.HOw do i fix that?This error happen with all the VI supply by Agilent driver(Hp816x).I m using Agilent 8163A lightwave multimeter.Thanks for answer my question.
Hello,
I think this Knowledgebase will help you to get your resource names and primary addresses correct and allow you to use LabVIEW to interact with your instrument when using the Agilent GPIB board.
http://digital.ni.com/public.nsf/websearch/E56D3D4866BE0A8A86256942006626F0?OpenDocument
Hope this helps,
Regards,
Steven B.
Applications Engineering
National Instruments
Similar Messages
-
I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?
Some of the following is going to use some technical terms — this area is inherently somewhat technical.
If you don't understand some part of the following reply, please ask.
Is this your own OS X Server system on your own network, or is this some other server within some larger organization?
You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured. This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
http://10.20.30.40
UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share. That's used if you're connecting to an Apple storage service somewhere on your network. You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server. (There can be additional requirements for connecting to Windows Server systems, too.)
If there's local IT staff available here, please contact them for assistance. If these are your own local systems and your own local OS X Server system, then some information on the server will be needed. (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.) -
Problems with connection to the Mountain Lion
Someone is having problems with connection on Mac Mountain Lion? I did a clean install and the connection is unstable.
Have you tried to reset your network settings ?
What I would do is delete the connection, and then retry the set up of that connection.
System Preferences>Network, select Wi-Fi on the left and then click on the 'minus' button -
My other Imacs and my wife's Ipad 3 have no problem with conneccting. My Ipad keeps coming up with unable to join the network. Nothing has changed with passwords--it just refuses to join my secure network. A couple minutes ago, it connected for 10 seconds, then dropped the connection. Is there a way to reconfigure the Ipad to fix this major problem, as we dropped our carrier (saved a bunch of money) and just went wifi.
Thanks so much for any help with resolving my connection problem.
GaryHello jaxgaryj,
The following article provides a number of potential resolutions for your WiFi issues.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Cheers,
Allen -
why cant itunes download songs from the itunestore,the download fails and thr error msg says check your connectivity,however the internet is connected and working fine.I did reinstall itunes
I have the same issue...I called Adobe and they said that Acrobat 8 is not compatible with Windows 7 ...so I tried installing the suite again without Acrobat and still the same issue....does anyone know if this issue is resolved by getting the new CS5 suite??? That is my only option it seems like...no one knows what's going on with the internet issue....even Adobe
HELP -
Problem with connecting [Microsoft][ODBC Driver Manager]
I am employing the Apache Tomcat 5.5.During the time of execution one Exception occur which implies [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
In ordinary way of execution of DataBase connectivity(without Apache Tomcat 5.5),it can successfully done.I dont know how to connect with database with tomcat 5.5.
Could anyone please steer me to find out the solution.Need to configure the server.xml file in tomcat .
<Resource name="jdbc/myoracle" auth="Container"
type="javax.sql.DataSource" driverClassName="oracle.jdbc.OracleDriver"
url="jdbc:oracle:thin:@127.0.0.1:1521:mysid"
username="scott" password="tiger" maxActive="20" maxIdle="10"
maxWait="-1"/>
More Info here
http://tomcat.apache.org/tomcat-5.5-doc/jndi-datasource-examples-howto.html -
Problems with connection to hard drive
Hello, I am currently using my Time Capsule for both Wi-Fi, and storing my iTunes folder on the hard drive. The Wi-Fi seems to always work perfectly. However, twice so far in the space of a week I've had an error message when using iTunes:
Server connection inturrupted: Time Capsule
At which point the icon for the hard drive dissapears from my desktop. Both times happened after my computer had been in standby mode for a while - although this hasn't happened everytime after standby.
Both times I found unplugging my Time Capsule and plugging back in re-set the connection successfully. However, I don't want to have to keep doing this, when I've spent so much money on something, I expect it to be reliable.
Is the Time Capsule fundamentally unreliable? Do you think I may just have a faulty one? Is there any settings I could change that might help stop this happening? Advice would be very gratefully received. Thanks,
MalinnaFurther to this it just happened again straight after I reset the TC. I got the following error messages:
The iTunes library file could not be saved. An unknown error occured (13005)
Connection failed. The server may not exist or is not operational at this time. Check server name or IP address and your network connection and try again.
It also might be worth mentioning that my laptop is right next to the TC.
It's my last chance to return it this weekend, so any thoughts much appreciated. Thanks,
Malinna -
Problem with Connection to the Server
From the Java Applet,
Basically when I try and connect it returns a org.omg.BAD_OPERATION - remote exception. The Serer is not registered in the implementation. It says use the putit and I have but it doesn't change things...
Basically my code for this look like
if ((tmp = ServerField.getText ()) == null)
markerServer = "";
else
markerServer = ":" + tmp;
// get host name from text field
hostName = HostField.getText ();
System.out.println("hostname:" + hostName);
System.out.println("Server:" + tmp);
// bind to server object
try {
System.out.println("Attempting to connect " + markerServer);
System.out.println("to :"+ markerServer);
System.out.println( "on "+ hostName);
wcGUI = WCGUIHelper.bind (markerServer , hostName);
Thanks in advance for any assistance you can give in solving this problem for meorg.omg.BAD_OPERATION
wcGUI = WCGUIHelper.bind (markerServer , hostName);These look like non standard classes. Are they part of a solution from another company or have you developed them yourself?
If they're from another company do they have a website, support contact or forum? you're unlikely to find an answer here I'm afraid. -
Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. I tried excluding different parts of the software from the back-up but it didn't make any difference. I even tried exluding "invisible items" to no avail. Any ideas?
When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
A full back-up on the iMac would be about 650 GB. The partial updates that I have been trying start out at 115MB and keep growing indefinitely. The original back-up never finished nor have any of the follow-up attempts.
The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
See A10 here.
Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work. -
After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.
1. Download the iOS 5.0.1: http://www.tobias-hartmann.net/2011/11/download-ios-5-0-1-veroffentlicht-direkte -downloadlinks/
2. open itunes,Click in iTunes while holding down the Shift key (on Windows) or Alt key (Mac) to restore and firmware -
Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...
I have the MacIntosh volume and the Boot Camp partition only. I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive.
The tech at the Apple Store had a previous life as a MSCE and was very helpful. I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard. I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick.
I do not have another installation, so that is not an option. I will try to create an external, I have plenty of hard drives around and see if I can get it done that way. It might take me a week or two to get back to it, but I will comment back upon completion of that effort. Thanks for your help....Dave Iverson -
Hi can anyone help me please this is driving me crazy ! I download and install Abode Digital Editions and when I try to Authorize with my Abode ID information I get the message " Activation Server Problem - check connection to the internet when I clearly am connected to the internet ?
<moved from Downloading, Installing, Setting Up to Adobe Digital Editions>
-
Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8
Hi
I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
Thanks PortozzygirlMore often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
http://captaindbg.com/how-to-update-drivers-on-windows-7/ (works on win 8 too)
Wanikiya and Dyami--Team Zigzag -
Problem with connecting to DB2 from ADFBC
I have a problem with connection to DB2 data using ADF BC components. Everything looks fine till I run the page(JSF) to see the data of a db2 table. I created a read only view object. This view is registered in the AM and from AM the view is returning the rows without any problem. But when I am running the page which has the view as a table these errors are thrown. Please help me to fix this.
JBO-30003: The application pool (od.mft.views.MFTServiceLocal) failed to checkout an application module due to the following exception:
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002)
## Detail 0 ##
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
at oracle.jbo.pool.ResourcePool.useResource(ResourcePool.java:336)
## Detail 0 ##
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:545)
## Detail 0 ##
oracle.jbo.DMLException: JBO-26061: Error while opening JDBC connection.
at oracle.jbo.server.ConnectionPool.createConnection(ConnectionPool.java:220
## Detail 0 ##
java.sql.SQLException: No suitable driver
at java.sql.DriverManager.getConnection(DriverManager.java:545)
Thanks
GangsSteve, the tester works good as expected and its retreiving the rows. As I said earlier the problem is with the JSF page when I ran the page on Embeded Oc4j of Jdev the page showing the above. The exception does not show on the console.
Please let me know if you need any more details.
thanks
Gangs -
Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.
Maybe you are looking for
-
Two message in different files widout help of UTL_FILE
Hi All..happy new year in advance..! I am in a strange scenerio by my client.I am having below type of code in which I am writing log via "dbms_output.put_line" but he needs that whenevr any error came into code eror message should be written in sepa
-
I want to connect my network printer
Printer
-
Trying to recover Outlook 2010 contacts
Trying to recover Outlook 2010 contacts and calendar from a HDD that cannot boot. therefore the .pst file cannot be exported. Is there a way to get the .pst and .ost files without actually running the Outlook program?
-
PSE 11 crashes when I attempt to add a new catalog
PSE 11 crashes when I attempt to add a new catalog to those that already exist. No programs are running that might conflict with Organizer, and I can run other functions such as downloading photos from my camera. As soon as I attempt to add a new sub
-
Hi need your help. Brought my mac off a Gumtree and had lion 10.7 installed on it. popped into the apple store and asked how i could reformat it without a disk. he advesed me to go into recovery mode and format from disk utility in there . when i