Problem with connectivity stopping , may be due to interference with digital TV antenna or Roku? Help!
I am having an issue with the connectivity jumping and having to restart the Airport Extreme. No problems until I moved it to another location. It is now near the TV with a digital antenna, and closer to a ROKU box. Anyone have advice? Please help!
Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help.
Similar Messages
-
Hey, I had met a problem with installation. Can any one help me?
Hi everyone, I'm an user of Windows 7(64 bit),
I had just download "Master Collection CS5.5"
Everything are fine but Adobe Acrobat Professional can't install on my computer.
There are the details..:
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 1 warning(s)
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - 安裝時發生嚴重錯誤。
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
ThanksRe: Hey, I had met a problem with installation. Can any one help me?
This worked for an English version and the concept should work with all Adobe programs - new or old (hopefully in any language). My guess is that you have/had an older version of Acrobat/Reader on your computer hard drive that needs to be *completely* removed first. Uninstall the new (and any old) Acrobat; then try using the "kb2..." guideline link below before reinstalling the new Acrobat. I am including the lengthy instructions in order to help others with more extensive installation problems. Good luck!
I live on a fixed income and use CS for a hobby. I had problem installing Adobe Creative Suite (CS1) to Windows 7 64-bit Pro on my new computer. Also installed Adobe Photoshop LR3. What I learned: All Adobe products (Flash, Acrobat/Reader, Photoshop, Creative Suites, etc.) leave a VERY pervasive footprint on your hard drive. Logic finally worked for me.... think of building a house; there is an order you have to do things in. First, you have to clean the area before laying the foundation; then you have to build the framework before you put the roof on. You cannot install an older program over ANY newer program; and you will sometimes have a problem installing a newer program containing Flash, Reader, etc. unless you "erase" the older versions of Flash, Reader beforehand. If installing older programs, do a Custom/Manual install; do not install older versions of Flash, Reader, etc. packaged with your Adobe software.
SOLUTION (not easy, but it works):
I first tried this; it did not solve my problem (but, if applicable, may help others). http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Win dows
Before doing anything, make document and any database/presets/cache back-ups beforehand (keep notes on their designated location*); manually create a System Restore point. (Be prepared to reinstall Windows if necessary - I didn't have to.)
Completely and meticulously eradicate (clean) your hard drive of ALL Adobe programs [uninstall, remove remaining folders, and remove only the registry entries that have the Adobe name attached (unless you are an expert and fully understand the other entries)]. Use this as a guideline http://kb2.adobe.com/cps/400/kb400769.html
Do a Custom/Manual reinstall of all your Adobe products *in order of release dates* (OLDEST first).... do not include Reader, Flash, etc. If your CD will not automatically run at this point, click "Open folder to view files" (use Computer/Windows Explorer, if necessary). Click "Adobe Creative Suite (or your desired program) ==> Setup.exe" (IMPORTANT: Make sure that Reader, Flash, etc. are unchecked.)
After each of your desired Adobe programs are installed, test to insure they boot up. Then download the latest Reader, Flash, etc. apps and install them (I did this in order of release date - oldest first). Do test boot(s) again.
Copy/Paste your document and any database/presets/cache back-ups into the appropriate folders (*this will vary depending on your programs and your filing system).
It has been four weeks and all my Adobe programs work flawlessly - system is stable, no problems! -
Lightroom doesn't recognize mine camera, the Nikon D800 E to shoot tethering. There is no problem with mine laptop. Can you help me with this issue?
Ronald ( the Netherlands)Sure the laptop know's that the Nikon D800E is connected, but lightroom doesn't recognise this camera. Two weeks a go it wasn't a problem at all.
-
Why I got this email if I didn't schedule any storage plan ? This is the email I got;
On 10/07/2013 you are scheduled to be charged $20.00 for your 10 GB iCloud storage plan, but there is a problem with your payment information, Can someone help me ? I don't want to be charge for something I don't want to buy.You may want to do couple things
1. cancel auto renewal for icloud - instructions here -under downgrade storage
http://support.apple.com/kb/HT4874
2. change your payment info in itunes, to either none or other payment method - instructions here
http://support.apple.com/kb/ht1918 -
Hi,
I've always encountered this problem with digital editions: Adobe Digital Editions 2.0 has encountered a problem and needs to close. We are sorry for the inconvenience.
I'm using Windows XP pro 2002, service pack2 on an old computer AMD Duron 901 Mhz , 384 mb RAM.
is there a solution ?
ThanksHi
I had the same problem, ADE 2 won't work with older AMD computers. See http://forums.adobe.com/thread/1081859
Older version that does work at: http://kb2.adobe.com/cps/403/kb403051/attachments/setup.exe
good luck -
Problem with Digital Signature strategy in Document Managment System
Hello ALL,
I am facing problem with Digital Signature strategy in DMS. If any help its greatly appreciated.
I have senario where Approvers in DMS will review the document and approve the document and put on their digitial signature. if i have multiple approvers maintained in the characterstics it has to check weather it has been approved by all approvers otherwise it has to reset the status to for approval.
My problem is i am able to reset the status back from approved to for approval using the badi document_status01 but when the next approver logs in to the document and change the status to approved he is not able to get the digital signature pop up which it comes only first user approves it.
can any one help me out on whats going wrong in it.
Thanks
Srikanth Aduri.Hi,
maybe the reason for this is that the status of the digital signature is not changed. Then the system thinks that the digital signature is still completed and therefore the user is not getting the pop-up again. The database table for the digital signature for documents is TC77. I hope this information is usefull for you.
Best regards,
Christoph -
Problem with TouchSmart tx2-1275dx Starting. Help!
Hello all,
I am having a huge problem with my pc! In the last week, I have had to do 2 system recoveries on my computer after I receive a message at startup that says that my pc has failed to start windows, which may be due to the last shut down or a software change. Now I havent messed with either of those and when I try to start windows normally, it tries to start up but then goes right back to that screen and the only way I have been able to get around that is to do full system recoveries and restore the pc to its factory settings. Does anyone have any idea what is causing this? I dont know if I have the energy to go through this a 3rd time! Please help and thank you!!!I wonder if you have WIndows Update turned on as "automatically download and update", some timesmultiple hotfixes and service packs may mess up the os. If this stops with windows update turned off, then set windows update to "download but let me decide when to update", and review what you are updating first. And apply the necessary ones only, one at a time.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!*** -
Trying to download iOS 5 it says there is a problem with my Windows Installer Package?Help?
I'm trying to download the iOS 5 and I get almost all the way done but then it stops when it's on Status and goes to an error and says "There is a problem with this windows Installer Package. A program run as part of the set up did not finish as expected. Contact your support personnel or package vendor." I have a windows vista computer.. but it should be able to run on it...
Any ideas on how to fix this??
Thanks!!'NOsaint09' - I was getting your same error message trying to install the iTunes 10.5 update on my Windows XP machine (in order to install iOS 5 on my iPhone 4). Tried uninstalling and reinstalling iTunes several times to no avail - same message, no install.
Well, after reading the above post by 'wiss...' i went to start Apple Software Update and was getting another (very cryptic) error message just trying to start ASU. I thought perhaps the problem with this program was causing iTunes 10.5 not to install - so I went to uninstall Apple Software Update using Windows Add/Remove Programs, and got another error message (not allowing the uninstall)!
Knowing there are programs out there just for the purpose of doing a forced & thorough uninstall, I search Cnet Downloads for the best free Uninstaller and downloaded Revo Uninstaller. Used Revo to uninstall Apple Software Update (and all associated files/data it found in registry).
Then to be sure, ran Disk Cleanup in windows to empty the Temp files/folders and Restarted the computer.
Finally, I ran the iTunes Setup.exe for 10.5 and it installed successfully!! Woohoo! I hope my experience may help others with similar troubles!
And thanks to Wiss for directing me to the problematic ASU program! -
Authorization Problem with 9.2.. Please HELP!
I recently got a new laptop, only my second so I'm not at the max. I downloaded 9.2, which I didn't have before. I imported all of my "Purchased" CDs, and keep getting prompted to authorize my computer, which I already did. When I try it again, it tells me I already have the computer authorized. So I go to play the song, and it again prompts me to authorize...
I have gone through every troubleshooting tip, I emailed them (with no answer, even after 48 hours...) I stopped in teh local apple store where the man proceeded to smirk the entire time, and had the nerve to tell me if I had a MAC it would work fine.
I tried to get an apple "specialist" to call me, but while I was setting it up, I was informed I would need to PAY TO GET SERVICE!! What happened to the 1,000 songs that I PAID FOR??
Needless to say I'm livid. If anyone could help me here I would really appreciate itI have in my room 2x usb keyboards and one ps/2 . I have also conenctor USB->PS/2 and the keyboard is not working at all when im using it to connect it to my PC. My friend told me that i should have no problems with getting into bios on usb keyboard. Probably i turned off an option in bios which is called USB Legacy Device Support and thats why i cannot get into bios with my usb keyb. But im worried, if I reset my bios settings, And that option will be on ? Will i be able to get into bios then ?
Could an owner of this board told me, what happens with this "USB Legacy Device Support" after bios reset ? Is EN or DIS ?
Regards -
Sound Problems with Mainbord....Please help!
MSI K8N SLI Platinum nForce4 Ultra 4DDR-DIMM 3PCI 3PCIe SATA-II Raid Audio GB-LAN Firewire Socket939 ATX
Hi are having huge problems with my sound.
Got all the gadgets last week. And have built the computer now. Everything is installed, all the drivers i got with the Box.
Now the problem is that the sound i very "crappy". It sound´s like a broken speaker. i have tried with different speakers and the problem persist.
Ive tried changing drivers and all that, and checked all setting. But nothing changes...
I get sound, but it sounds like hell. Cant almost not hear what´s playing or what are said through the speaker.
Is it a hardware problem, something broken on Mainbord??????
Somebody know?
Please help.Just as a suggestion. . . .
I would remove the soundcard and clean the edge pin connectors. The "static" type sound could be comming from a resistive connection in the edge connector. You may also try running dxdiag from your "start / run" menu and see if the sound results are better.
Also, (even though the sound card is new), you may want to blow out the pin connector in the back of the card (where you plug in your speakers) and try reseating your speaker cable again.
Someone above mentioned power. That could easily be an issue if you have alot of hardware and a power supply that is not up to par with your gear.
EDIT: For some reason, I thought you had a soundblaster card. So, pls forgive the card removal information. just trying to help!
Just some stuff to check. . . GL!
doggy -
Problems with my eMac. NEED YOUR HELP!
Hai,
I'm new right here, and i'm not very good at english, but I have problems with my eMac so I hope that someone can help me!
When I boot my Emac there's a screen that says:'
'to continye booting, type 'mac-boot' and press return.'
When I typed mac-boot I pressed enter(because I don't know the return-button) and then I get this screen:
'panic(cpu0): Unable to find driver for this platform: PowerMac6,4'
and other text with a lot of numbers.
Also in that screen stands:
'you need to restart your computer. hold the power button for several seconds or press the restart button'
I hold the power butten for several seconds and I put the computer on again, but than I'm getting the same texts&things.
So, can anyone help me, or do I have to go to the Macstore?(Does anybody know how much that costs?)
Thanks for reading& maybe helping!
Kisses from Amsterdam!There are so many unknowns here it is hard to know the right advice to give.
+I didn't get any disks with it. Do you know if I can buy them somewhere?+
You may be able to get 10.4 Tiger disks from an Apple store, but that depends on where you live. Apple usually only sells their latest OS which is currently 10.5 Leopard, but I would think your eMac would be best with 10.4 Tiger. If you can get them from an Apple store, ask if they give a student discount if you are eligible as that can be a saving.
Normally every Mac, _new or used has its own disks,_ including an Apple Hardware Test CD. These disks are useful if you want to reinstall your operating system, but also useful for diagnostics and and some software repairs. The thing is, you could get hold of some disks and still find your machine has something broken in the hardware, and you will have spent money on the disks for nothing.
It would be better to determine if the computer is fixable before you purchased any OS disks.
Do you know anyone with an Apple computer who has some disks you could borrow? Or do you know someone who has an iBook which you could use in
FireWire target disk mode to connect the two together , and use the Disk utility in the iBook to run a test on your hard drive.
Even without a disk, you could still try starting up your computer in single user mode and perform some of the steps in this article.
http://support.apple.com/kb/TS1411?viewlocale=en_US
which assumes you have 10.3.9 which you may have seeing as it is an old computer. -
The mail application on my I-Mac dates all emails, in or out, as 5th (of whatever month it is). It seems to get the time right.
The computer clock is fine. I have no problem with my MacBook - just with the I-Mac. Any ideas, please?OK Vicky, good clues...
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544 -
I am having problems with hullu plus, to wach tv shows or any, I call them but they say the problem is with my iPad, bur I used to wach with no problems do you have any suggestion. On wath to do?
Update your iPad to iOS 5.1.1. Connect your iPad to your computer, launch iTunes then click on the Check for Update button.
-
Problem with Digital Cinema Desktop Preview on Macbook Pro
I hava a Macbook Pro 2.2 GHz with 2 GB RAM. I would like to use a connected 24"-Display for preview of my HD-Material (ProRes and HDV). Unfortunately I am not getting my Macbook Pro to playback all frames. Whend Digital Cinema Desktop Preview is activated, there are only still frames displayed. No smooth playing back neither in the canvas window nor the 24" display. I have External Video -> All Frames checked.
Does the Macbook Pro 2.2 not meet the specs for this feature?
Or is it a problem with Leopard? Is anyone with Tiger able using Digital Cinema Desktop Preview with succes?
Regards,
JoergSo are you saying that the DVI output on my MacBook Pro IS true HD resolution and not a proxy like the canvas?
What I am saying is that the video feed coming out of the DVI port is YUV. Computer monitors take that YUV information and convert it to RGB for displaying purposes. So if you connect an Apple monitor to the DVI port, and then use that for Digital Cinema Preview, you are seeing a converted proxie image. The MXO takes the actual YUV footage and outputs that to the Apple display as YUV, and therefore presents full quality broadcast colors. And it does it pixel for pixel...the 23" display is 1920x1200, so there are thin black lines on the top and bottom.
AND the MXO software has a proc amp for adjusting color bars, and a BLUE ONLY option for proper monitor calibration. THis really is an amazing little box.
I'm using a Dell ultrasharp 20" that looks very good that way; I just didn't think it was HD.
It is, but it is a converted RGB image...and since it is 20", it isn't pixel for pixel (well, it would be for 720p, not 1080), and if it isn't pixel for pixel, then it is a converted image. Not suitable for color correction.
then using a DVI to HDMI cable I should be seeing HD from my Sony bravia also?
Yup...sure can. It will look pretty good too. But it being a consumer set, and again having a YUV>RGB converted image, it won't look as good as it could. The MXO would feed it a proper YUV signal, as would an Decklink HDP (but you need a decklink card with SDI out for that).
Shane -
Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help
Hi there Clairemcaula,
You may find the troubleshooting steps in the article below helpful.
iCloud: Troubleshooting restoring an iCloud backup
http://support.apple.com/kb/ts4036
-Griff W.
Maybe you are looking for
-
How do i add a rescue email to an existing apple id
Is it possible to add a rescue email to an existing apple ID? If so, what are the steps?
-
I need to design a Crystal report that shows the average number of scheduled appointments per day in the next 4 weeks. (This will be a rolling weekly report.) The fields I am working with are "ApptDateTime" and "PatientNumber" (Our database has no "
-
What permissions does a user need to be able to access a document library's workflow settings menu?
A group has created some out of the box SP 2010 workflows in a standard document library. Some users have the "Workflow Settings" icon available to click on, but other staff only see a grayed out icon. I have been trying to determine what change is n
-
Did SRM 4.0 can work together with ECC 6?
Hi: We are in a process of upgrade, we are plannig to move from R3 4.7c to ECC 6, and also we have a SRM 4.0. Do you know if it is possible to SRM 4.0 to work with ECC 6?? We want to know if we can stay our current version of SRM, and just upgr
-
How to record receipt write off for the PO receipt ?
How to record receipt write off for the PO receipt ?