Problem with Connector Pins??

Since Wednesday, I've had this issue with either the cable or the connector pins. If the wire is connected to the iPhone and and I push the plug slightly, the phone will cease to charge and sync with the computer until I've stopped touching it.
If I hold the phone at a certain angle, it again loses connection to the computer. Lose connection enough times and a pop up appears on my laptop saying something like "this device can perform faster on USB 2.0."
So, is it a problem with the connector pins? I tested out the cables on a different comp in case it was a problem with the USB port and it did the same thing.
Any opinion and/or help would be grateful.
Thanks.
P.S. I'll try to post a video of the problem.

You can utilize any iPod cable. All the way back to iPod Nano's first model or maybe a few iPod classic models earlier than that. As long as the cable is USB 2.0 to iPod, it will work with connect and sync. You can't use FireWire to iPod however. FireWire doesn't have enough juice to sync devices except the first gen iPod era.
If other iPod cables don't work with your iPhone syncing there may be a problem with the connector pins which you can have an Apple employee inspect or visit an AT&T store for a probable swapout.
You can also purchase a battery case and utilize them for syncing. This replaces the iPod connector with Micro USB or Mini USB. You would connect your Mac/PC to the Micro/Mini USB and after it recognizes the new method, it'll know your iPhone and sync as well as charge your battery case.

Similar Messages

Problem with colors pinned to the taskbar.

Good evening, today I bought a Lenovo Z50-75 and I have a problem that is not normal for appear colors below in the taskbar when I have a couple of three or more Pin programs and go to right click on them with the colors that appear there is too deep blue unlike other computer that has black and also not so great the eikonideio of Pin nor iconand the exit the program. What can I do about that?So it seems my http://s30.postimg.org/lmuwdaqht/index_php.png
http://s30.postimg.org/waync50gx/index_php2.png Thanks very much.

Is this a problem with the Pinned section of the Jump List for the Firefox icon? Assuming so, a few questions:
* Did anything significant happen before the data was lost, such as using the Reset feature or uninstalling/reinstalling Firefox?
* Are other sections of the Jump List (such as Frequent and Tasks) operating normally?
* Are you able to pin a new site to the Jump List?
Windows uses a binary file format for Jump List data, meaning that viewing it in a text editor reveals a lot of gibberish in addition to scattered text (if you can even determine which file is relevant). There are utilities to extract this data. I haven't tried any myself, but this one came up in a search: http://www.nirsoft.net/utils/jump_lists_view.html

Problem with connector for ABAP Webdynpro

Hello,
I have a problem with a new Business Package :
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/specialist/com.sap.pct.erp.instructor.bp_folder/com.sap.pct.erp.instructor.roles/com.sap.pct.erp.instructor.instructor/com.sap.pct.erp.instructor.instructor/overview/com.sap.pct.erp.instructor.work_overview/com.sap.pct.erp.instructor.work_overview/com.sap.pct.erp.instructor.instructor_worklist
Component Name : com.sap.portal.appintegrator.sap.WebDynpro
I think the problem is coming that I have no customized the connector with good values. Do you know a good blog or document to create a system alias dedicated to abap wedynpro or its bsp ?
Regards,

Yes, the UserId is the same in the portal and the BackEnd.
Previously we used the ITS for our ESS and now we are using the Portal, so all have an UserId and all personal have the same Id as before.
The first month it worked fine but when the password went out, in Back End, after 30 days, the question for login information appeared.
Regards
Ingvar

Problem with 30-pin adapter

When I use an apple 30-pin to lightning adapter for charging or listening to music I am not able to receive any call... is someone having the same problem??

Does the dock manufacture say it will work with iOS 6? Some docks do not.
Is there a firmware update available for your dock?
Have you went to theri support sute?
Have you tried resetting the dock?
Sometimes this works
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Problems with the pin to charge iPhone 5 in the car

There is a problem using the very nice cases BELKIN to protect the iPhone 5 and trying to charge the phone in the car. The adapter- pin provided by MAC is to big (square) and do not allow the pin enter in the phone. It sems like it was a miscommunication between Apple and the manufactures of cases. The problem do not exist with the charger for home

likely they were just guessing
when it comes to charging then the only! thing that matter is the volt level
if one charge a device which was made to charge by 5volts with 12Volts it's big trouble
nothing else can give issues

Problem with MAC Pinning and new VLAN

[Cross posting to Nexus 1000V and UCS forums]
Hi all, I have a working setup of UCS 1.4 (3i) and Nexus 1000V 1.4 and as per the best practice guide am using 'channel-group auto mode on mac-pinning' on the Nexus uplinks. I am having trouble when adding a new VLAN into this environment, and it is a reproducable problem across two different installations.
I go through the usual VLAN creating process on the Nexus, the upstream network and within UCS itself. I create the new vethernet port profile and set it as an access port in the new VLAN. However when I attach a VM (either existing or new) to this new vethernet port profile within vCentre the VM cannot communicate with anything. However, if I disable MAC pinning with 'no channel-group auto mode on mac-pinning', the VM instantly starts to talk to the outside world and the new VLAN is up and running. I can then turn MAC pinning back on again and everything continues to work.
So the question is, is this behaviour normal or is there a problem? Disabling MAC pinning does have a brief interruption to the uplink so is not a viable long-term solution for the customer when they want to add new VLANs. Is there a way to add new VLANs in this scenario without any network downtime, however brief?
Thanks

Simon,
Let's gather some further outputs if you're able to recreate this (if this is prod, let me know and I'll whip this up in my lab).
Go through the process of setting up the new VLAN. Once you confirmed your VM has no connectivity when using a PP tied to the new VLAN, gather the following outputs into a text file and attach to this thread:
From the VSM:
show vlan
show int trunk
show log last 15
module vem x execute vemcmd show vlan y (x = module of VEM where VM is running, y is the VLAN ID)
module vem x execute vemcmd show bd y (y = VLAN ID)
module vem x execute vemcmd show pc
module vem x execute vemcmd show port
module vem x execute vemcmd show pinning
module vem x execute vemcmd show trunk
From the CLI of UCS Interconnect:
connect NXOS
show vlan
show int trunk
Also please highlight or Identify:
- Problem VLAN ID #
- VM veth # in question (1000v)
- vEth # for each Service Profile vNIC used for your VEM uplinks (UCS)
We'll start with this and work from here. Once I have these outputs I'll let you know if I need anything else.
Regards,
Robert
(I'll keep this as the main thread, and update the 1000v forum once we resolve)

Problem with BBM PIN

I am receiving annonyms multiple requests on Balckberry messenger. Can somebody help me in getting it stopped or can I remove the app ??
Thanks

Hi pallavi
Sorry to hear that but one must know your PIN to send such request .
But if you want to delete it for a while then yes you can do it , for that On your Homescreen Go to Option > Device > Application Management > Scroll down and locate BlackBerry Messenger , highlight it , press the Menu Key and click on Delete .
Once deleted Perform a Battery pull restart bu removing the battery while it is Powered On , wait for a min then reinsert it back . That's all .
Whenever you feel and need BBM you can download it from BlackBerry world or simply from your BlackBerry browser browse to www.blackberry.com/bbm and download it again.
Good luck.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Adobe Muse problem with the "pin" feature

I am creating a prototype under the tablet setup. I can't access the "pin" function for some reason. It won't activate at all. Seems deactivated. Anyone know why?

Hi thanks again,
I'm a little weary of providing the url's as they are prototypes of a product not yet released and this work is being done as part of client pitch. I have been using muse as a means of prototyping our work to communicate with development and test out visuals, and transitions. This tool has been extremely helpful for me as I am a designer that has very limiting coding skills.
I can tell you that I'm not using a web font (I find the image output of text [not web-friendly] is pretty jaggedy) so I have been doing the majority of my work as part of png's as pages. Both sites are making use of the same png's output from Photoshop. They are completely one png. All assets are image files actually, which lends me to believe that somehow the web output of muse is rendering the images better than the desktop output.
re: Were the desktop and tablet layouts created in the same or different .muse files? No they were created in different .muse files.
re: Do they both have the same setting for "Convert opaque PNG to JPEG" in the "Content" panel of Site Properties? Yup they both have those checked.
Hope that helps:) I love the program, but am looking forward to enhancements. I would love to provide user feedback somehow. Do you know how I may accomplish this?

Never met problem with connector

Hi,
I have the source and target on the same oracle instance but in different schema.
Owb automatically creates the connector but when I try to validate it, I found this warning:
VLD-3064: Owning and referenced locations of this connector are on the same database instance. Unless explicitly referenced in configuration settings, no generated code will use the database link resulting from deployment of this connector.
What should I change to make it work?
Please help me!
Vieruzzo.

Hi AP,
thanks for help me.
I have registered the location but when I try to deploy the mapping I found these warning:
TIPO_MISURATORE_MAP Create Warning
ORA-06550: line 26, column 3:
PL/SQL: SQL Statement ignored
TIPO_MISURATORE_MAP Create Warning
ORA-06550: line 37, column 8:
PL/SQL: ORA-00942: tabella o vista inesistente
I don't understand why it don't found the table that are in a different schema but in the same database instance.

Problem with 68-pin cable

How can I fix the cable SH68-68-EP to the connector block CB-68LP (there is a gap of 5 mm between screw and hole) and to the DAQ card 6024E (there is no hole at all; it seems to me that some clip is necessary there!).

NI moved from a clip-style cable to a screw-lock style cable. While this was done over a few years and most boards and cables are cross-compatible, this doesn't appear to be the case for you. My best suggestion would be to call into NI technical support and explain the situation. Either a new cable or a cable-adaptation kit will most likely be required.
Regards,
Justin

Need help with my PIN

Hello everyone, I have got my BlackBerry Curve since christmas but I never got my PIN working, I did some research online and it said it should work as soon as you buy it, but mine isn't I know my PIN and I tried to had a friend of mine and it wouldn't send the request to my friend, so I asked my friend to add me and I didn't get the request either. My friends PIN is working so it's a problem with my PIN or something?
Also I can not use anything that I download from "BlackBerry App World".
What shall I do?

Hi and Welcome to the Forums!!
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your wireless service provider to ensure that you have a data plan adequate to enable the services you desire to have:
http://www.blackberryfaq.com/index.php/What_do_I_need_a_Data_Plan_for%3F
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

TS2634 I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

I have the same problem.
Two similar discussions:
https://discussions.apple.com/message/23081658#23081658
https://discussions.apple.com/message/23281391#23281391
I have not yet seen any official response to the question: "Is the Apple AV Composite cable fully supported with 30pin connector devices upgraded with iOS7 - specifically ? - eg. iPad 2, iPhone 4, iPhone 4s"
If it is not currently supported is that then due to a bug / oversight and in that case is it something that will be fixed in the near future?
Please let us know what feedback you got from asking Apple support.

Problem with front panel USB connector

Motherboard: MS-6750
I have a problem with my front panel USB connector JUSB2 not working.
I have checked the connection to be sure that it is oriented correctly.
I also made sure that it was enabled in the BIOS.
Still no luck. There is not any voltage on this either.
I see a jumper or pin labeled JGS1 just below the JDLED1...do not know what this is and cannot find it in the manual.
Any ideas on what this is and how I might trouble shoot the USB connector?

Which 6570 MB do you have, if its the K7N2 Delta 2 Platinum and came with the Dled bracket try plugging that into that port on the mainboard and see if those usb ports work as it could be the usb hub itself not working on the front. Hope this helps Dok

HT1476 my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?

my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?
It seems to me that the connection port is faulty.
George

Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Problem with sun outlook connector, Microsoft LDAP services

Dear All
I have big problem with sun outlook connector and I can find any way to fix the problem,
I am using sun java system connector deployment to create installation script for my clients.
in the tool I have specify the location of Microsoft LDAP services, I am using outlook 2003 and sun say this option is not needed for outlook 2003, if I try to create the script and run the script on target client I will receive below error,
I tried the office CD-ROM as path for LDAP services but the outlook connector says there is no LDAP services on the CD and I receive same error,
19:02:29 [5365] Outlook version is 11.0.5608.0.
19:02:29 [5376] Adding MAPI directory 'C:\Program Files\Common Files\System\MAPI\1033' to PATH.
19:02:29 [5475] TMP directory is 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp'.
19:02:31 [5362] Checking Windows version.
19:02:31 [5363] Windows version is 5.1.
19:02:31 [5364] Checking Outlook version.
19:02:31 [5509] Checking default mail client.
19:02:31 [5508] Default mail client is 'Microsoft Outlook'.
19:02:31 [5178] Verifying that Outlook is not running.
19:02:31 [5179] Trying to login to shared session.
19:02:31 [5369] Installing Sun Java System MAPI Service Providers using 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp\Sun Outlook Connector\sunone-mapi-services.msi'.
19:02:32 [5502] Upgrading the Sun Java System MAPI Service Providers.
19:02:40 [5370] Finished installing Sun Java System MAPI Service Providers.
19:02:40 [5366] Checking whether Sun Java System MAPI Service Providers are installed.
19:02:40 [5367] Sun Java System MAPI Service Providers are installed.
19:02:40 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
19:02:40 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
19:02:40 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
19:02:40 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
19:02:40 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
19:02:40 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
19:02:41 ERROR: Microsoft LDAP Directory MAPI Service Provider must first be installed.
Best regards
Mo

This is likely to depend on the version of the OC you have. The released one isn't supposed to work with Outlook 2003. Please contact Tech Support for the latest version and help.

Problem with Connector Pins??

Similar Messages

Maybe you are looking for