Problem with constant selection of keyfigure ar reporting level

I have created a multiprovider on top of a DSO and a Cube ,there is one characteristic which is not common in the DSO and Cube ,while i make constant selection on a partcular key figure at reporting level, that uncommon characterisitic data is displayed as not assigned.
Please help me in this regard.
Thanks in advance
Vikas Arya

Hi,Vikas Araya,
Try to use filter on that characteristic which is not common in the DSO and Cube.
because constant selection on key fig allows u r key fig value to become independent of all filter values.
Hope it may help u....
regards
kalyan

Similar Messages

Problem with Non Cumilative key figs at report level.

Hi Gurus,
I got an issue with the below keyfigures when I tried to display them in the report Stock Overview.
0TOTALSTCK
0VALSTCKVAL
0QMSTOCK
0TRANSSTOCK
0BLOCKEDSTK
0CNSSTCKQTY
These keyfigs are non-cumulative keyfigures. I wonder why these keyfigures show nothing at report level. The cube is IC_C03 which has the datasources 2lis_03_BX, 2LIS_03_BF and 2LIS_03_UM.
Please help.
Regards,
Sasi

Did you initialize the inventory properly?
Check if inflow and outflow exists in cube for the values you are trying to execute the report

No values when using key figure with constant selection?

Hi experts,
I have built a Webi on top of a universe that is sitting on top of a Bex query.
In my Bex query I have a bunch of key figures defined that are restricted on time and category.
This Webi works fine.
Then I added an additional key figure that required a constant selection on time and on category.
When I first added this to my Webi report it was fine. But once I refreshed my report showed no values.
The report still seems to know that it is meant to retrieve values because it is bringing back the correct records - just no values. (ie I am showing time in my columns and it's showing the correct periods that are meant to have data)
I refreshed a number of times and sometimes it would bring "#TOREFRESH" in some cells but once I refreshed again the cells are blank. Sometimes it would even show me a value in a couple of cells and others would show the "#TOREFRESH"
I went back to my Bex query and removed the key figure with constant selection and the report is working again?
Has anyone experienced something similar? Is there a way to make this work?
Thank you!
Sabine

#TOREFRESH error message appears for smart measures (measure object with aggregation type Database Delegated) when the context for the measure is changed. Refreshing data will solve the issue. Database delegated measures are used for some non-additive aggregation which webi is not able to handle properly. If you are not using such aggregation, then tou can change the aggregation type to something other than database delegated to avoid #TOREFRESH.

How to create keyfigure in Reporting level.

Hi Experts.
My question is How to create keyfigure in Reporting level {not
calculated keyfigure, Restricted
keyfigure and also Newselection,New formula}
thanks&regards
pradeep k pavan

You can use formula variable to populate numbers. Again you can use virtual key figures if you want to populate values on fly. But what exactly is the requirement?

Report Painter problem with empty selection variant

Hello,
I use the cost center selection variant for the column definition in Report Painter as characteristic value. This selection variant get only the cost centers which are valid from 1.1.2003 to 31.12.2004. The column of the report created by Report Painter which uses this selection variant display value without taking into account limitations follow from this selection variant. I expect value zero for year fiscal year 2007 in this column, because the cost centers are invalid in 2007 year but the report displays different value. The problem appeared after upgrade from 4.6C to ECC 6.0.
Best Regards
ZD

My problem with Report Painter occurred when I was creating my own report based on 1VK library.
In my example I used in the column definition characteristic Cost
Center, which is determined by selection variant, and Basic Key Figure
equal SWKG-Costs. For system date (18.07.2007) there are no valid
master data for the characteristic Cost Center but when I execute
report for fiscal year 2007 the column display no-zero value without
taking into account value of Characteristic Cost Center. I expected
zero value in this column because there are no postings for Cost
Centers (no valid cost centers were selected) in financial year 2007.
Could you help me with this problem ?

Problem with variable selections

Hi All
I am executing the report with period 46.2007-50.2007 . I am getting the result for this period.But if i run the report with same selections from 42.2007-50.2007, I am not getting the data.It says no applicable data found.
I am using interval as the option for variable .Could some one help on this?
Thanks
Raghu N

Hello
According to your selection you should get the data.
check the both selection (46 - 50) and (42 - 50) in the LISTCUBE transaction.
if data available in both cases then problem may be with other restrictions.
If no user exits are in that variable try create one more variable as it is and then try by restricting with new variable.

Problem with the selection screen in submit program

Hi Friends,
i am facing the problem wih the selection screen in submit program. in my Module pool program i am using the submit program statement, When i execute the program , The module program display the submit program selections creen.
I have implemented the code same as below.
submit ztest with tknum =p_tknum and return.
Can you pleaes help me how to avoid the submit program selection screen.
Thanks,
Charan

Hi Charan,
You have to give the selection screen values when you submit a job.
Press F1 on submit and you will see more details.
Here is an example from ABAP Documentation.
Program accessed
REPORT report1.
DATA text(10) TYPE c.
SELECTION-SCREEN BEGIN OF SCREEN 1100.
SELECT-OPTIONS: selcrit1 FOR text,
                  selcrit2 FOR text.
SELECTION-SCREEN END OF SCREEN 1100.
Calling program
REPORT report2.
     DATA: text(10)   TYPE c,
      rspar_tab TYPE TABLE OF rsparams,
      rspar_line LIKE LINE OF rspar_tab,
      range_tab LIKE RANGE OF text,
      range_line LIKE LINE OF range_tab.
rspar_line-selname = 'SELCRIT1'.
rspar_line-kind    = 'S'.
rspar_line-sign    = 'I'.
rspar_line-option = 'EQ'.
rspar_line-low     = 'ABAP'.
APPEND rspar_line TO rspar_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'H'.
APPEND range_line TO range_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'K'.
APPEND range_line TO range_tab.
SUBMIT report1 USING SELECTION-SCREEN '1100'
               WITH SELECTION-TABLE rspar_tab
               WITH selcrit2 BETWEEN 'H' AND 'K'
               WITH selcrit2 IN range_tab
               AND RETURN.
Regards,
Jovito.

Error with Constant Selection on Multiprovider

Hi All,
I have a MP, based on 1 IC and 2 DSOs.
I have created a report like: KPI NO, KPI Decription on rows pane and KPI value in KF pane.
KPI NO is available in all 3 infopro mentioned above. KPI description is available only in one DSO. I have restricted the KF (KPI value) by applying constant selection on KPI description. Hopefully this should work for my case. Unfortunately, its not working. Report is displaying only KPI No, KPI Descrp and KPI value in single col, thats fine. But here, KPI desc is displaying as "Not assigned" instead of the data display what is there in the target. Not able to figure out the cause. Could any one pls suggest what went wrong here (query creation/MP creation).
Note: KPI desc is a text bearing char InfoObject and this DSO contains only Key fileds.
Best Regards
Venkat...

In Rows:
KPI No which is present in all three providers - IC, DSO1 & DSO2.
KPI description - only present in DSO1.
In Col:
KPI Value - present in only IC.
I have restricted this KF with KPI description and applied constant selection to this.
My report lay should come like as below.
KPI NO         KPI Descrption           KPI Value
1                  Invoices pending         25000
2                  payment over due        15000
3                  error rate                       2.12
Unfortunately, the description is not come but its displaying as "not assigned". MP is correct.
Best Regards
Venkat...

Any problem with the BREAK ON COLUMN on REPORT statement

Hi All,
We are using the sql query output to print a summary report in our application.
We are taking a ref cursor variable and capturing all the data into this. There is a group by
Clause in the select statement that will populate the ref cursor variable. And there is a BREAK on one of the column.
While printing the ref cursor variable data after each group data first line there is a gap of 4 lines and then it is printing the next line.
The format is like this.
COLA COLB COLC
abc mno XYZ
kgh yop
ksjd djf
def mno XYZ
kgh yop
ksjd djf
Is there any problem with this format. Please advice.
Thanks in advance.
Regards,
Girija

This should handle your problem if you are facing the same problem like i'm showing ->
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE    10.2.0.3.0      Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:01.58
satyaki>
satyaki>
satyaki>break on job
satyaki>
satyaki>
satyaki>select *
2     from emp
3     order by job;
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7902 FORD       ANALYST         7566 03-DEC-81       3000                    20
      7788 SCOTT                      7566 19-APR-87       3000                    20
      7876 ADAMS      CLERK           7788 23-MAY-87       1100                    20
      7900 JAMES                      7698 03-DEC-81        950                    30
      7698 BLAKE      MANAGER         7839 01-MAY-81       2850                    30
      7566 JONES                      7839 02-APR-81       2975                    20
      7782 CLARK                      7839 09-JUN-81       4450                    10
      7839 KING       PRESIDENT            17-NOV-81       7000                    10
      7521 WARD       SALESMAN        7698 22-FEB-81       1250        500         30
      7844 TURNER                     7698 08-SEP-81       1500          0         30
      7654 MARTIN                     7698 28-SEP-81       1250       1400         30
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7777 SOURAV     SLS                  14-SEP-08      45000       3400         10
      9999 SATYAKI                    7698 02-NOV-08      55000       3455         10
13 rows selected.
Elapsed: 00:00:00.42
satyaki>
satyaki>
satyaki>clear break
breaks cleared
satyaki>
satyaki>
satyaki>select *
2 from emp
3 order by job;
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7902 FORD       ANALYST         7566 03-DEC-81       3000                    20
      7788 SCOTT      ANALYST         7566 19-APR-87       3000                    20
      7876 ADAMS      CLERK           7788 23-MAY-87       1100                    20
      7900 JAMES      CLERK           7698 03-DEC-81        950                    30
      7698 BLAKE      MANAGER         7839 01-MAY-81       2850                    30
      7566 JONES      MANAGER         7839 02-APR-81       2975                    20
      7782 CLARK      MANAGER         7839 09-JUN-81       4450                    10
      7839 KING       PRESIDENT            17-NOV-81       7000                    10
      7521 WARD       SALESMAN        7698 22-FEB-81       1250        500         30
      7844 TURNER     SALESMAN        7698 08-SEP-81       1500          0         30
      7654 MARTIN     SALESMAN        7698 28-SEP-81       1250       1400         30
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7777 SOURAV     SLS                  14-SEP-08      45000       3400         10
      9999 SATYAKI    SLS             7698 02-NOV-08      55000       3455         10
13 rows selected.
Elapsed: 00:00:00.21
satyaki>
satyaki>
satyaki>Regards.
Satyaki De.

Problems with the selection of text or objects

dear fireworks community!
unfortunately i have problems with my running version fireworks (CS6) and i can't find any solution or even get help via the customer support.
i can't switch between objects with a click, when i've choosen one already. i also can't cancel the entire selection. the only way (to select a new item) is to click on an empty space, hold it and pull the selection over a new item.
another thing is that i cant select a textfield with a doubleclick or switch beteween choosen tools within the usage of a shortcut …
what i already tried:
updating, deinstalling, re-storing preferences, "cleaning" the libraries, installing (this entire scenario for at least three times)
i hope someone of you can help me!
thanks in advance!

incredible!
thank you so much!

Problem with Mail, and Placceholder Columns in Report 2.5

I have two problem with Developer/2000 Report 2.5:
1. What should I configure in order my Report 2.5 can
mail the report output to Microsoft Mail or MS Exchange ?
2. Placeholder Columns have an Edit PL/SQL code as Formula
columns. But when I fill the trigger at Placeholder columns
there always some error. I never know the functions of
trigger at placeholder columns. is it a bug at Report 2.5 ?,
if not please tell me how can I use the placeholder
columns trigger ?
Thank you.
Herry H.S.
null

I found out the problem... not a problem at all... thank you...

Problem with column selection in GUI_DOWLOAD

Hi everyone !
I want to save data from an internal table to a DAT file using GUI_DOWLOAD. In this internal table, there are 2 colums that won't be downloaded so I call the FM this way :
    CALL FUNCTION 'GUI_DOWNLOAD'
         EXPORTING
              FILENAME                = L_FILE
              FILETYPE                = 'DAT'
              COL_SELECT              = 'X'
              COL_SELECT_MASK          = V_COLSELECT
         TABLES
              DATA_TAB                = TAB_OUT
              FIELDNAMES              = TAB_FIELDNAMES.
V_COLSELECT contains an 'X' for each column I need to be downloaded and a space for the 2 other columns.
In the result file, the columns that I didn't select don't appear BUT there are 2 columns with no header and filled with zeros at the right edge of the file. I don't know where these 2 columns come from. Maybe a problem with fieldnames but I'm not sure (in TAB_OUT, all columns are present but in TAB_FIELDNAMES there are only headers for the selected columns).
If anybody have an idea, please just tell me.
Points will be rewarded for helpful answers.
Thanks.
Nicolas.

Hi,
Try to keep fields same in TAB_FIELDNAMES and TAB_OUT. because anyway you are using COL_SELECT_MASK.
I think you are using COL_SELECT_MASK properly ie
if you have 6 field in the TAB_OUT out of that you need to donwload 1,3,6 then your
COL_SELECT_MASK will be X X X
aRs

Problems with getting captivate 5.5 to report completion with Internet Explorer?

Hi guys. I've been trying to get my head around this issue for quite a while now. We´ve created a pretty standard course for one of our clients, around 40 slides with some video and a quiz. We just want to check Complete/Incomplete measuring slide view completion. All reporting is as expected using browsers like Firefox or Chrome . But using Internet Explorer 8 or 9, the course reports Incomplete even with all slides visited. This occurs in both of the LMS-systems that I have access to. Has anyone else had similar problems with CP 5.5 and Internet Explorer, or does anyone have any suggestions on possible solutions?
Kind regards
/Jonas

I'm wondering if your issue is perhaps due to IE going into Quirks Mode because of the way the standard Captivate SCORM HTM templates are coded.
One thing IE does not like is having any comments outside the HTML tags at the top of a page. This is something that the Adobe Captivate templates have by default.
Take one of your published test mdoules, open up the HTM file in a text editor and remove this text at the top of the page:


Then try running this again to see if you get better results in your LMS.
If that doesn't work, try using the Pipwerks modified templates for Adobe Captivate. They are much better quality and have removed a lot of bugs that foul up some LMSs.
There's a series of articles on his blog about the changes: http://pipwerks.com/2012/01/11/cleaning-up-adobe-captivates-scorm-publishing-template-part -1-introduction/
You can find the links to download and install his version of the templates on this page: http://pipwerks.com/2012/01/25/cleaning-up-adobe-captivate%e2%80%99s-scorm-publishing-temp late-part-7-giving-the-revisions-a-home/
You need to back up your old templates before changing over to Phil's new versions (there are separate templates for SCORM 1.2 and 2004) but I recommend you at least give them a try.

Problems with customizing select lists and popup LOVs

Hi
I have 2 problems about select lists and popup LOVs.
The first one is about a select list in a tabular form.
It should be created with APEX_ITEM.SELECT_LIST_FROM_LOV or similar and take its values from a named LOV.
This worked fine but now it should also have the possibility to enter a free value.
I tried to accomplish that by creating a APEX_ITEM.POPUP_FROM_LOV, but there is a problem with the function that is called by the arrow icon right to the input field (for eg. genList_f11_5()).
If the row is added by addRow, then it works fine, but if the row is is not empty
then the function call is like genList_f11_$_row() and the input field gets no value, when a LOV option is selected.
The other problem is about a select list which should have the possibility to enter a custom value and
also there should be the possibility to select several values. I tried to implement this by a text area containing the selected values and a multiple select list, with an event handler in each option. The user could click options and they would be copied to the text area. The problem is that I couldn't make the event handler work in IE.
I would appreciate any ideas about either of these problems.
Tiina

Hi,
If you download application you can see source.
I have not write any instructions, sorry.
If you are on Apex 4 you can just load jQuery UI autocomplete library and take ideas from my app.
If you download my sample in zip there is uncompressed htmldbQuery library.
You can see that and take only function htmldbAutocomplete.
Then check jQuery UI document
http://jqueryui.com/demos/autocomplete/#method-search
There is method search that you can use open list just by click of input.
I hope this helps at start.
Regards,
Jari

Function module based generic extractor - Problem with the selection

Hi all
The following is my code in the function module. I am able to get the entire data if i dont give any selections and the number of records is also correct. But when i select a MATNR value, it returns 0 records where as it needs to return 3 records. If i give selection based on bukrs, werks, lgort its working fine. But if i give selection based on MATNR, then it is not working.... I think there is a problem in the bold part of my code. If i debug, LS_MATNR is having the correct value which indicates that there is no problem with the value being passed to LS_MATNR from my selection screen of my datasource in RSA3. Even GT_WERKS is also having data. Please help.
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT MARA~MANDT
        MARA~MATNR
        MARC~WERKS
        MARD~LGORT
        MARA~MEINS
        MARD~LABST
        MARD~EINME
        MARD~SPEME
        MARD~RETME
        MARD~INSME
        MARD~UMLME
        MARD~VMLAB
        MARD~VMEIN
        MARD~VMSPE
        MARD~VMRET
        MARD~VMINS
        MARD~VMUML
        MARC~XCHPF
        MARD~KLABS
        MARD~KEINM
        MARD~KSPEM
        MARD~KINSM
from MARA inner join MARC on
MARAMANDT = MARCMANDT AND
MARAMATNR = MARCMATNR
inner join MARD on
MARAMANDT = MARDMANDT AND
MARAMATNR = MARDMATNR
AND MARCWERKS = MARDWERKS
for all entries in gt_werks
where MARC~werks EQ gt_werks-werks
AND MARA~MATNR in LS_MATNR.
    ENDIF.                             "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.

try this
select marc~matnr MARC~WERKS into t_marc for all entries in gt_werks
where werks EQ gt_werks-werks and lvorm = space.
if t_marc is not initial.
select MARD~LGORT MARD~WERKS MARA~MEINS MARD~LABST MARD~EINME
MARD~SPEME MARD~RETME MARD~INSME MARD~UMLME
MARD~VMLAB MARD~VMEIN MARD~VMSPE MARD~VMRET
MARD~VMINS MARD~VMUML MARC~XCHPF MARD~KLABS
MARD~KEINM MARD~KSPEM MARD~KINSM MARA~MEINS from
mard inner join MARA on mard~matnr = mara~matnr
for all entries in t_marc where mard~matnr = t_marc-matnr and mard-werks = t_marc-matnr
and mard~lvorm = space.

Problem with constant selection of keyfigure ar reporting level

Similar Messages

Maybe you are looking for