Problem with Continous Cheque printing

Requirement:
Continous printing of cheques through FBZ5 on Epson LQ 2180 printer without Tearing.
Cheque lengths:
Width: 240 MM
Height: 93 MM
Actions performed:
Created the Page size , Page Format, Device Types, Formats
Also changed in SAP script for the Page format.
Now from fbz5
If I give the printout for the Cheque,(print privew we can see the exact size as configured for ZCHEQUE) but It prints on that page properly but after print it ejects A4 size.
Because of this situation I can not give continuous printout for the Cheque,
At present we are performing following action.
After printout of each individual check we need to tear off and again load the page .
Printer used is : EPSON LQ 2180.
Please Help

Hi Friend,
Please check where u copy action from standard Page format i,e, DIN4 to ur custamize page format.
If not then copy it from copy button and use SAPWIN printer driver.
Step 1 : GOTO 'SPAD' TC.
Step 2: Device type 'SAPWIN'
3 : Assign format 'Z..'
4 : Copy Action from 'DIN4'
5:save and use that driver for printing.
Replay me if any problem

Similar Messages

Continous Cheque Printing !!!!

hello everybody,
the problem i am facing is with the <b>continous cheque printing</b>,
using the TCODE - f110 ,everything is working fine,
but the problem is, out of the multiple cheque it prints only one cheque
at a time. after triggering the print command ,it print the same cheque.
pls help me out , 2 print the continous cheque
waiting 4 ur reply,
Rakesh

Hi,
I am working on cheque printing using sapscript f110_prenum_check and standard program rffous_c. I had made changes so as to display line items for that document number Iwhich desiplays Bill no, Bill date, TDS, Net Amount etc.) . This works fine for single vendor. But, now I want to do cheuqe printing for multiple vendors. I suppose you had worked on that..Please help me how to go about..and what changes I am supposed to make in the program..Please respond me ..its very urgent...
Thanks in advance..
Ujjwala

Problems with your HP printer after upgrading to Windows 8.1

If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
www.hp.com/go/tools.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions work just fine.
I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up

My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft. Now I cannot print at all. I get an error that says, "windows cannot print due to a problem with the current printer set up". I have tried reinstalling and a ton of other solutions to no avail. Can someone PLEASE Help!

Hello there, @jesseangelique ,
Welcome to the Community!
I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
Also, let me know which Officejet 8500 Model you have:
HP Officejet Pro 8500 All-in-One Printer - A909a
HP Officejet Pro 8500 All-in-One Printer - A909b
HP Officejet Pro 8500 Premier All-in-One Printer - A909n
HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Problem with countinuous paper printing in dot matrix printer

Hi All,
I have problem with dot matrix printer (Devise Type EPESCP) while printing continuos printing. If i am printing 2 or more than that prints at a time, 2nd page is printing 5 lines up.
I have developed one smartform for this and i have used A4 size page format.
I have tried to change the Printer initialization code to 86 lines for DINA4. Still no change in continuous printing.
     Printer initialization
     Reset after exit
     Cover page
     First Page
     Start of even page
     Start of odd page
     Start of page
     End of first page
     End of even page
     End of odd page
     End of page
     Start of line on an even page
     Start of line on an odd page
     Start of line
     End of line on an even page
     End of line on odd page
     End of line
Printer initialization
# reset
\e\0x40
# select character table 3 -> PC 437 character set
\e\0x74\0x03
# set line spacing 6 LPI
\e\0x32
# set page length 86 lines
\e\0x43\0x46
# cancel bottom margin
\e\0x4F
# set left margin to 0
\e\0x6C\0x00
# select LQ quality
\e\0x78\0x01
# select non-proportional spacing
\e\0x70\0x00
Can any one help me.
Thanks,
Vishnu

Hi Vishnu,
Above you have the following commands:
set line spacing 6 LPI
\e\0x32
set page length 86 lines
\e\0x43\0x46
46 HEX = 70
So the above settings mean 70 lines at 6 LPI = 11.66 inches.
So is the paper length 11.66 inches? If not, you should adjust the settings accordingly.
Regards,
Aidan

Problem with Photoshop Elements Printing

I have been using Photoshop Elements for a couple of years now and know it pretty well. Today while attempting to print, a strange problem came up: After going through the protocol to make a print, just before the image prints PE does a very fast auto correction that basically ruins all the color correction I have made on the image. How do I disable this function?

Hi and thanks for your reply. I checked the settings under "Print", "More Options", then "Color Management" and it only has "Print Space", none of the three options that you said I should have. Am I looking in the wrong place?
Date: Mon, 3 Sep 2012 11:14:57 -0600
From: [email protected]
To: [email protected]
Subject: Problem with Photoshop Elements Printing
    Re: Problem with Photoshop Elements Printing
    created by 99jon in Photoshop Elements - View the full discussion
Check your color management by clicking More Options in the print dialog There are basically three options:1) Printer Manages Color2) Elements Manages color3) No color Management Make sure everything is consistent e.g. if you choose Elements manages color make sure color management is switched off in the print driver.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4669848#4669848
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4669848#4669848. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Cannot print due to a problem with the current printer

Cannot print (anymore) due to a problem with the current printer is the message I get every time I try to print something out. I tried to reinstall the printer's software, I changed the cables, but nothing happened. It seems to be something related to the printer setup utility. Any big idea on how to solve this? I was printing without problems until this afternoon. I have a HP Laserjet 1022 and sometimes I use Adobe Acrobat Writer. None is currently working.
Thanks for any help.
Power Book G4 Mac OS X (10.3.9)

I just had the opererational system (10.3.9) reinstalled . Back to normality again.

Problem with the MVMapView.print(printMapDiv,) function.

Hello,
I have a problem with the MVMapView.print(printMapDiv,) function.
My FOIs are displayed correct on the screen but on the printed letter
the stroke(border) color and the labels of a circle are not displayed.
the fois have a custom style:
var xmlDef = '<svg width="1in" height="1in">'+
'<g class="marker" '+
'style="width:40;height:40;stroke:0xff0000;fill:0x00ff00;stroke-width:1.5">'+
'<circle r="20"/>'+
'</g>'+
'</svg>';
markerStyle = new MVXMLStyle("my_vector_icon_" + i + '_' + j, xmlDef)
and are created like this:
v_result = new MVFOI(p_geofeature.foiId, p_geofeature.foiGeomertyObject, markerStyle, null, 30, 30);
v_result.setHTMLElement('1',0,0);
Browser: I can see the map with a green circle, a red border and '1' as a label on
top of the Circle.
Printed Letter: I see the map with the green circle but no red border Color and no label.
The implmentation of the printing function uses the same techique like the "Oracle Maps Tutorial"
It is a javascript function called through a href link:
function mapPrint()
var a=document.getElementById("printmap");
global_gdi.mapviewer.mapview.print(a);
Version is Ver11_1_1_5_B110527
Does anbody know how to print the map properly including the contents of the
MVFOI class set trough setHTMLElement function?
Greetings
Andre

Thanks for your reply but it is not working and i can prove that.
I have a small example based on the mapviewer print tutorial. To run it you need a
mapviewer installation and copy the text into a html file. In the browser you can see
a green point with a red border and red label text on a map.
If you use the print button everything except the label text will be printed.
I think this is a mapviewer css-api bug.
<html>
<head>
<META http-equiv="Content-Type" content="text/html; charset=UTF-8">
<style type="text/css">
@media screen
.noscreen {display: none;}
@media print
.noprint{display: none;}
</style>
<script language="Javascript" src="/mapviewer/fsmc/jslib/oraclemaps.js"></script>
<script language=javascript>
var mapview;
var baseURL = "http://"+document.location.host+"/mapviewer";
function showMap()
mapview = new MVMapView(document.getElementById("map"), baseURL);
mapview.addMapTileLayer(new MVMapTileLayer("mvdemo.demo_map"));
mapview.setCenter(MVSdoGeometry.createPoint(-122.45, 37.6706,8307));
mapview.setZoomLevel(4);
mapview.display();
//adds custom foi with label
var xmlDef = '<svg width="1in" height="1in">'+
'<g class="marker" '+
'style="width:40;height:40;font-family:sans-serif;font-size:20pt;stroke:0xff0000;fill:0x00ff00;stroke-width:1.5">'+
'<circle r="20"/>'+
'</g>'+
'</svg>';
var markerStyle = new MVXMLStyle("my_vector_icon_", xmlDef);
mpoint = MVSdoGeometry.createPoint(-122.30, 37.73,8307);
var v_result = new MVFOI("11", mpoint, markerStyle, null, 60, 60);
v_result.setHTMLElement('test label',0,0);
mapview.addFOI(v_result);
function mapPrint()
var a=document.getElementById("printmap");
mapview.print(a);
</script>
</head>
<body onload=javascript:showMap()>
<div id="map" style="position:absolute;top:50px; left:10px; width:600px; height:450px;border:0px"></div>
<div id="printmap" class="noscreen"></div>
<p>Please click <a href="javascript:mapPrint()">here</a> to print map</p>
</body>
</html>
Edited by: user12005064 on 27.02.2012 02:37

Problem with NIReport.llb\Print HTML Report using IE.vi on different machines

We have 5 machines here in our workgroup which have the same state regarding security patches and other system updates. We recently found out that there is a problem with the NIReport.llb\Print HTML Report using IE.vi on the different machines.
If I would open the VI on MachineA the control could be loaded. If I would open the VI on MachineB the control could be loaded. If I would copy the VI from MachineB to MachineA and open the VI the control could not be loaded. If I would copy the VI from MachineA to MachineB and open the VI on MachineB the control could be loaded. MachineB could load the version from MachineA and MachineB but on MachineA only the own version will load. I have seen that both versions have the same GUID for the Microsoft Webbrowser but are different in some other aereas.
Since printing HTML Reports is part of the application which will be distributed as application I want to know if someone else have seen such a behaviour or has got problems distributing an application.
Also I want to know which additional information is stored in an Active-X container about the control beside the GUID.
We have Win XP Prof SP2 with MS IE 6.0.2900.2180 on all machines in the workgroup.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Hi Tom,
this is the VI <vi.lib>\Utillitiy\NIReport.llb\Print HTML Report using IE.vi copied from a machine that can load and run the VI and it will print. On this machine the control in the VI is white.
This VI will give the "Control could not be loaded" message on my machine.
The file shdocvw.dll is 2006-10-23 16:18 size 1.460 KB and I verifyed that both machines have the same version of this file.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions
Attachments:
Print HTML Report using IE.png ‏11 KB

Problems with stopped HP Print Jobs on Mac OS 10.5.

I have several Mac Stations with different Mac OS X versions (Mac OS X 10.5-10.7) and bought 2 HP Laser Printers:
- HP LaserJet Pro 400 M401dw
- HP LaserJet Pro 200 M276nw
After installing the HP Driver SW on all Mac Stations I changed then on the Printers the dynamic IP address to static ones. The printing didnt work anymore from the Mac Stations. I re-installed all Driver SW on every Mac Station. Then Printing worked on every Mac, except only on the Mac OS X 10.5. Station the Print Jobs were always stopped after any Print attempt.
This appeared on the Mac OS X 10.5. Machine in the Printer Spooler Job Message Window and within the error_log File content:
- can't create PictWPSDoc from `/private/var/spool/cups/xxx'.ERROR during execution of pictwpstops. Error number -9783
As it seems like problems existed with file permissions I ran a complete Disk Utility File Permission Repair. Then another reinstall of the HP Driver Packages. - Still the same failures with stopping Print Jobs.
Then I read the README file of the Installation Package. And the quite simple solution was:
DE-INSTALL the HP Driver SW FIRST (with the HP Deinstallator), BEFORE RE-INSTALLING the HP Driver SW again.
So I did this, then no Print Jobs were stopped anymore and both Printer are happily printing.
The conclusion is, I guess, Mac 10.6..10.7 does not have problem with multiple re-installation of the HP driver SW. Only the Mac OS 10.5. did NOT work anymore after another reinstall of the Driver SW Package, and without de-installing it properly. The bottom line is to de-install the driver SW (and maybe disk repair) properly BEFORE another insallation wants to be done. This however solved my printing problems on the Mac OS X 10.5. machine.

Hi,
Please follow the link below :
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

HP Laserjet 1020 problem with double-side printing

Hi, everyone!
I have a problem with my printer HP laserjet 1020. From the community I know that there is no driver for 1020, but there is for 1022 (http://support.apple.com/kb/DL907). I installed it and everything was fine until I tried to print 2-sided page... It appears 2-sided option disappeared and I don't know how to fix this...
Can anyone help, please?
Thank you for looking.

AMW122,
The part in the photograph appears to be part of the fuser assembly. If it is part of the fuser assembly, I would recommend you replace the fuser. An internet search on "LaserJet 3300 fuser" found several links.
From what I can see, it appears that the fuser sleeve is damaged which will continue to worsen.
If it is not the fuser, can you post another photograph further away so that we can see the location on the printer where it is located, etc...
Kaz
Kazman
I am an HP Employee
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Problem with exporting and printing from pages to PDF

I have a problem with my Pages
My font will not be embeded in my pdf files.
I have saved as a ps file and in to the destiller and my fonts are missing.
I need to send my file to the print shop but they will not accept my file and i now understand why.
fonts are missing...
Is there a workaround.
I have no problem in Indesign or quark but pages.....
I need help
thanks a zillion

The font is coming from a notation software Sibelius 4 and is namned opus
Hmmm ... Sibelius is a music notation software and notations are marked up in MusicXML. Presumably the font file is an SFNT with TrueType splines, but it is probably not installed in OS X system folders - rather in an internal Sibelius application font folder. So presumably you do not see the font in FontBook and OS X font auditing does not apply to the font.
Sibelius exports EPS files, right? If memory serves, an EPS is still legal even if the font resource is not embedded. And in any case, we know from the behaviour that the font resource is not embedded for some reason. So how do you get Sibelius to put the font resource inside the graphic ... normally there is a button in the EPS export procedure that gives you the option to Embed All Fonts.
You do not seem to get this button, though. Or why else would you not have checked it already and the problem would have gone away already.
The next point in troubleshooting this is that you are not following the path that would let OS X detect that an external font resource is not embedded.
I go from pages-print-printer- acrobat Pro 8-save as Pdf-x
What you are doing here is telling Pages to tell OS X to generate a PostScript program within which is nested your Encapsulated PostScript program with the call to an unresolved external font resource.
So why does Acrobat Pro not detect the unresolved external font resource? Hmm ... did you try the Preflight option in Acrobat 8 Pro? It should provide information on unresolved embeddings.
I have also tried pages-print-printer- acrobat Pro 8 and save pdf as postscript and put the postscript file in destiller 8 pro with defalt setting high quality print
The whole problem with EPS and PS is that this sort of situation is possible in the first place (plus, what is worse, the PS program can include custom additions to the graphics model that then fail in the PS interpreter whence Apple GX normalizing, Adobe Distiller normalizing, and Apple Quartz normalizing). You want to get as far away from EPS and PS as possible, believe me.
So, you have not done what I posted that you should do in the first place. If I were you, I would first get rid of the problem that the EPS is making a call to an external font and then get rid of the problem that the PostScript is preserving the external call.
To get rid of the problem that the EPS is preserving an external call, simply open the EPS in Apple Preview which includes a NORMALIZER for EPS/PS, and then save out the graphic as PDF. Alternatively, if you don't trust Quartz for some reason, set up a hotfolder for Distiller, make sure the option to embed all fonts is enabled, and convert the EPS to PDF.
Now replace your EPS in Pages with PDF in Pages, and don't save PostScript to disk but save PDF to disk through the proper procedure which is File > Print > PDF > Save as PDF/X [for your custom configuration of the PDF/X-3 filter considering that no sane person in North Europe prints lowend US SWOP, we use ISO].
If you begin by telling OS X that you want PDF within which fonts are supposed to be embedded ALWAYS, then you have started the right way. Otherwise, you have not told the operating system what you want to do, and this then leads you into places where you are unlikely to have the expertise to troubleshoot problems.
So, forget placing EPS in the first place, place PDF. And forget saving PostScript to disk, save PDF to disk. If that does not sort your problem, here is the dirty solution for professional prepress.
Adobe Photoshop has an EPS rasterizer that has wide tolerances for poor PostScript programming (so does Adobe Illustrator 6 and higher by the way).
Therefore, if an EPS is posing problems, one workaround is to rasterize the EPS at high resolution in Photoshop and place that high resolution PDF in your layout.
Take care that you rasterize as 1 bit at the required resolution of the print provider, probably 2450 dpi. When you save the 1 bit as PDF, Photoshop automatically compresses to a very, very small file (don't be surprised if 15Mb compresses to something like 0.5Mb).
Rasterizing in Photoshop should not be necessary if you simply start by telling the operating system what it is you are trying to do. Then the operating system should be able to take the right decisions for you, and tell if you if finds problems it cannot resolve without turning to you.
Good luck,
Henrik
would-be technical writer

Problem with colors when print to pdf in FM9

Hi,
we have some problems with printing colors to pdf with FM9.
The FM document contains (1) eps file with a green box and (2) a rectangle created with FM graphic tools, filled with the same green color values (91/0/60/44)
In FrameMaker the two colors really looks different, but so what, in the PDF both colors (eps) and rectangle got the same correct green color.
Ok, the were different in creation, so they were CMYK and RGB, but your print shop could manage that.
Now in FM 9:
(1) If I do a "save as PDF" and switch OFF "convert CMYK to RGB" the resulting PDF is the same as from FM8 (correct)
(2) If I print to PDF via distiller and define the job options to "convert all colors to CMYK" the resulting rectangle green is very different from the eps green.
I tried different job options, the best result was "convert all colors to CMYK", other options just very more ugly.
Does someone of you know a solution for your problem? Help is very appreciated. I could send example files if necessary.
Thanks in advance.
PK

PK-ulm wrote:
But we want to use the print option, using the distiller.
Pia,
this last sentence needs some explanation, I think. Why do you want to use the print option?
Using the print option, you still go the same route as FrameMaker Win always did, which is using the RGB-only Windows postscript driver. Now, with FM9, you have the option to get CMYK colors directly to PDF, as defined, without any color conversion. And it *does* work, as long as you restrict your documents to either CMYK colors or spot colors coming from the FM libraries.
So, again: why do you want to use the print option?
On a sidenote: I'm not sure if I interpret your username correctly, but if you are able to understand German, you'll find some in-depth color tests made with FM9 here: http://www.hilfdirselbst.ch/foren/FM_9_und_Farben_in_PDFs____getestet_P387800.html
Bernd

Problem with line items print in Script MAIN window.

Dear Friends,
I am facing a problem with display the line items in main window.
Here i have created my form with 2 pages,
in first page i have created header window(my header information is full length of page), in second page i have created 2 windows, one for MAIN window and second for FOOTER window,
i am having the Footer information about to off the page.
and in my main window total 3 line items are coming, if i am having 3 line items then it is displaying properly (first 3 line items then immediately footer information on same page) but if am having more then 3 line items say four, then in my second page first it is printing 3 line items then it is switching into another page. After that footer is coming but. in previous page after printing 3 line items the remaining page is empty..
my client want me to remove that place also. he wants to display continue..
i think so u people r understand what is my problem...pls advice me what i want to do to solve this problem.
Thanks
Sridhar.

Hi Sridher,
If you want to display the footer information only on the last page why dont you use a table to display your details and place the footer details in the table footer instead of a seperate footer window.
Regards,
Vidya.

Problem with PO output print format

Hello all,
I have a problem with PO print output. When I am creating a new PO and taking the printout, the printout is coming perfectly fine.
But when I am making any changes to the PO and then trying to taking the printout one more time, the system is not showing ANY data in the output. It is showing only the data that is hardcoded.
Our ABAPers have tried to debug this issue, but it looks like there is an issue with the SAP standard program itself. I have also raised an SAP OSS note but till now didn't get any reply from them.
Please suggest me if I am missing any customization activity in this case. I have to resolve this issue ASAP.
Please provide some of your valuable suggestions. I will be thankful to you all.
Regards,
Umakanth.

Ramesh,
When I am taking the print of the purchase order after making some changes, the system is not showing data like, material number, vendor number, Bill to address, delivery address, quantity, etc. There are some hardcoded data like country United Kingdom since my client belongs to UK. So only this hardcoded data is displaying in the print preview of the PO after making changes and also the printout.
The output types are triggered in the change mode. I have given a temporary solution to the user saying that once the changes are done to the PO, delete the output types that were triggered automatically in change mode. And enter the output types again manually and fill all the relevant data. In this way the CHANGE field is not ticked and when we save the PO, the printout is coming perfect.
This is a temporary solution as it is practically not possible for the users to enter the output types manually for a lot of POs.
Also Ramesh, I didn't understand your statement "Also check whether the Fine Tuned Control is maintained for Operation 2 under Message Types of PO". Please tell me the importance of this and where do we check this?
Regards,
Umakanth.

Problem with Continous Cheque printing

Similar Messages

Maybe you are looking for