Problem with continuous loading logo when accessing YouTube

How do I overcome a continuous 'loading' logo when trying to access YouTube?

If you're stuck within an app or you've noticed a problem, simply hold both the home button and sleep/wake button at the same time. It's important to keep your fingers on these buttons until step 3.
After a few seconds the red ‘slide to power off' screen will appear, simply ignore this. Ensure your fingers are still holding down the home and sleep/wake switch.
Shortly after you should see the Apple logo, it's now safe to let go of the iPad's buttons. Your iPad should now boot, beware this process can take up to 15 minutes or so.

Similar Messages

Problem with MX440. Error when accessing tabs under Display in Contro

I just bought a new GF4 MX420, but am having lots of difficulty with it. I replaced a ATI Radeon 7000 with this card, and didnt have any difficulty with the ATI.
After installing the latest drivers for the MX420 and trying to access the MSI Information tab, or the MSI Clock tab under display in control panel I get the following error "An exception occurred while trying to run "shell32.dll, Conrol_RunDLL " C:Windowssystem32desk.cpl, Display.
I have ensured that the card is properly seated in the AGP slot. Further, I have tried to reflash the bios but I get the following error: "Can not locate VGA BIOS state "
Everything else on the card seems fully operational. The store that I bought the card from will not take it back unless I prove the card is defective.
i have an AMD 1800XP, Asus A7s333... Someone please help me. I ahve also installed the lastest AGP drivers.
And the 3D turbo experience doenst work either..

Sorry I should refrase my last remark.
Certain ppl get this problem, but there is no clear cut way to solve it.
It is a program error that is coming up because of an imcompatability with XP, your drivers, Gf4 and new Gf3 and maybe your MoBo,
My brother had the exact same thing, and he solved it by a MoBo bios update, plus older drivers.
But this doesn't help in all cases
He has Abit MoBo and they brought out a bios specifically for XP and Gf4, thats why I said for you to check with Asus, as they have a new bios for your card and it may solve this.
I would say 350w maybe undermanned for your needs but to rule out Powersupply probs, if it runs at AGP2x with drivers reinstalled, then this could be the case.
A thorough test would be to unplug all unneeded hardware and then reinstall drivers and test card.
Another thing could be that remnants of the old drivers are still clogging up the system somewhere.
40.41 fix
could try this program. Or uninstall drivers, revert back to standard display, delete any registry setting for Nvidia, then install new drivers

HT4623 After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.

After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.

IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost

Ive got this problem with itouch 4th gen when im trying to upgrade my ios to ios 6.1.3 when it is verifying it suddenly shutdown and it keeos on blinking with the logo and i cannot open it...what is the main cause of thst..tnx

ive got this problem with itouch 4th gen when im trying to upgrade my ios to ios 6.1.3 when it is verifying it suddenly shutdown and it keeos on blinking with the logo and i cannot open it...what is the main cause of thst..tnx

- Reboot the computer
- Try DFU mode and then restore/update
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Delete the update file so that new one has to be download.
IPSW file location for Mac and Windows
- Try on another computer to help determine if you have an iPod or computer problem.

Hello I have an Iphone 3, but I had a problem with the wifi connection when I want to connect the wifi icon is gray and I can choose to access the wifi

hello
I have an Iphone 3, but I had a problem with the wifi connection when I want to connect the wifi icon is gray and I can choose to access the wifi

Read here:
http://support.apple.com/kb/ts1559
If nothing works, you most likely have a hardware issue.

My iPod Touch 2g is stuck on the home screen with the loading logo

My iPod touch 2g is stuck on the home screen with the loading logo in the middle of the screen, here is some backround information about an hour and a half ago I had turned it back on from it being powered off so then I continued too use it and then an hour and a half later after I locked it then unlocked it my iPod was frozen at the home screen with the loading logo and a weird part about it is that at the top of the screen the time is the same time it was when I unlocked my iPod also it turned down the brightness I attached a picture but is really dark because my flash caused it to be blurry and it was already really dark any one have any ideas how I can fix this there and i cant remember what the operating system was i havent updated it in a while so cant remember

- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT201412 Have a problem with iPad2, apple logo appears but iPad won't boot up, then logo disappears & iPad dies - probably caused due to insufficient hard disk space (too many apps) - any help greatly appreciated

I have a problem with iPad2, apple logo appears but iPad won't boot up, then logo disappears & iPad dies - probably caused due to insufficient hard disk space (foolishly loaded up too many apps) - any help/advice greatly appreciated

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

I have Windows 7 and just recently experienced a problem with itunes freezing up when I clicked on the "apps" tab. Everything else seems to work okay in itunes. I have uninstalled it and reloaded it 4 or 5 times, but still freezes up.

I have Windows 7 and just recently experienced a problem with itunes freezing up when I clicked on the "apps" tab which shows the apps that are loaded on my phone. Everything else in the itunes software seems to be working okay. The problem is in the part where you sync the newly purchased apps. The apps will all be blank that are downloaded and that part of the software crashes itunes or freezes up. I can get out of itunes okay after the freeze up, but it just stops me from syncing anything that I have newly added. If anyone has had this problem before or knows someone that has, please let me know how I can fix it. I have uninstalled and reloaded itunes 4 or 5 times, but the problem is still there. I might add that I have been using itunes and purchasing apps for 2 to 3 years without any problems. HELP.

You would get better response from the iTunes community forum.
Have a nice day!

Problems with Safari Loading Sites and Photos

For the past week (Feb. 2015) I've experience problems with Safari loading websites on my 2009 20" iMac desktop. Running version OSX Lion 10.7.3 4 GB. Intel Duo Core 2.66 GHz
Mac also will frequently not upload photos at websites like Yahoo News or Facebook. It does this throughout the day.
So, I downloaded Chrome, thinking it would be a better browser if Safari is not functioning. Chrome is just slightly better, and when it won't load a website I get the following error message from Chrome: DNS_PROBE_FINISHED_NO_INTERNET.
I'm debating taking the Mac to the Apple store for diagnosis or repair today, but if anyone else is experiencing similar problems, could you please offer some solutions as to what is going on.
Thank you.
AngieRK

Non-responsive DNS server or invalid DNS configuration can cause long delay before webpages load - Apple Support
Unless you have a good reason not to, you should update the OS to version 10.7.5.

My ipod touch is having problems with the headphone jack when I rotate a little song stops

my ipod touch is having problems with the headphone jack when I rotate a little song stops

Hey Silverdemon, sounds like a short, most likely in the headphones. Try a different set of headphones with this iPod or try the headphones with a different device. If the problem stops with your iPod or it moves to another device, then replace the headphones. If within 1 year of date of purchase Apple will replace the headphones for free if problem is a defect, not abuse. If the problem continues with a different set of headphones, check the port for damage and foreign debris. If you note debris, attempt to remove it, if damage noted contact Apple and set up an appointment to have it evaluated. if nothing appears wrong, try plugging / unplugging to jack about 12 times maybe corrosion on the contacts if so that should clean it. Next thing to try reset your iPod. After that try restore from backup. Last resort, restore to new. Just make sure you make a full backup to your computer before you restore so no data is lost. If nothing works, contact Apple and set up an appointment to have your iPod evaluated. Good luck, Cheers.

I'm having problem with my iphone4S first when i updated software to 7.1 after a month or so wifi turned grayed, second when i tried to turn off in the night as soon as i turn it on battery empty now its totaly dead. What should i do with it?

I'm having problem with my iphone4S first when i updated software to 7.1 after a month or so wifi turned grayed, second when i tried to turn off in the night as soon as i turn it on battery empty now its totaly dead. What should i do with it?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Just recently, I have encountered a problem with my iPhone. When someone calls, I can clearly hear the caller, but the caler canno hear me speak. Sometimes the problem goe off and works properly, b most of the times, I am facing this problem.

Just recently, I have encountered a problem with my iPhone. When someone calls, I can clearly hear the caller, but the caller cannot hear me speak. Sometimes the problem is nt there and works properly, but most of the times, I am facing this problem. I have tried plugging in the earphone and speak, but its the same.... can anyone advse what may be the problem?

iphone 4g have this problem
first solution :change the flex micro
second solution : ic audio must reballed
also watch video
http://www.youtube.com/watch?v=C-n1LJEK3PM
http://www.youtube.com/watch?v=prSZ9yJnofY
http://www.youtube.com/watch?v=tkEiR6OPhhc

When I turn my computer on I receive a message that Apple wants to make a change to the hardware. I click on yes but nothing happens. I think this has something to do with Apple "push". I had a problem with this in iTunes when I tried to sync my iPod Touc

When I turn my computer on (Windows 7) I receive a message that Apple wants to make a change to the hardware. I click on yes but nothing happens. The change has something to do with Apple "push". I recently had a problem with"push" on iTunes when I tried to sync my iPod Touch. I have latest software for iTunes and iPod. Can anyone tell me what to do to get this change to install?

ptford wrote:
When I turn my computer on (Windows 7) I receive a message that Apple wants to make a change to the hardware
Since hardware cannot be changed with software, perhaps you would be so kind as to post the exact wording of the message?

I have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

i have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

Will u help me or not?

I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server wher

I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server where the PDFs open fine) I get an error 'There was an error processing a page. Invalid function resource' The other one just doesn't open at all. Can anyone help with this please?

Hello,
Are the pdf linked correctly in the website? Is this a public website? If yes, please post the link here.
~Deepak

Problem with continuous loading logo when accessing YouTube

Similar Messages

Maybe you are looking for