Problem with conversations view in messages

After the Belle update, all my sms-messages were deleted. So i got them back by restoring them from the back up i made before updating. Now they are not displayed in the right order, by date. Instead, first i get the mms messages, then when I scroll up I get all my sent messages to that contact, en even more up all the received messages. So it's not a conversation anymore. Within the "sent" and "received" messages groups they are ordered by date and time. How can i fix this so i can see the actual conversation again, with alternating sent and received messages? The mms messages also have the time and date from restoring from the back up, the regular sms-messages still have the original time and date correctly.
I hope someone can help me to fix this. It's really annoying.

I have the same issue after updated to Belle. Have to manually copy each "sent" and "inbox" per contact from Nokia Suite back to phone one by one according to the time. Very annoying since the backup and restore during upgrading from Anna to Belle did not work properly. I don't think Nokia did not acknowledge this issue and Nokia will solve this issue for Symbian phone since this had happened in Anna update last time and is now happening again in this Belle update. Forfunately there is Nokia Suite in the host PC that can manually do the task but consume users' time.
angler

Similar Messages

Problem with a view in XK01 transaction

Hi All,
I am working on upload conversion for Vendor Master. While doing conversion, i am getting a problem with a Contact person view in XK01 transaction. In contact person view the telephone field column sometimes allowing to add data ,sometimes it's not allowing data which results an error in conversion program saying that the telephone field in not an input field. I don't know why the view is showing the telephone field like that.
Can any one suggest the solution for this problem. I know this is configuration problem with a view but i posted in ABAP forums.
Thanks

Hi Ben,
I assume that you are writing a BDC program to upload contact person information. If so, you are trying to populate a table control here. Please check to see if you are calculating the index to assign values to the correct rows.
if you are calculating index in your program then i think it should be configuration problem as you said.
Thanks,
Ganesh.

Problem with conversion of strings like THISStr - this_str capitalization

Problem with conversion of strings like. THISStr -> this_str
Can anybody pass on the reverse code. I have one, but its faulty.
public static String convertFromPolycaps(String str) {
          Pattern pattern = Pattern.compile("\\p{Upper}+");
          Matcher matcher = pattern.matcher(str);
          StringBuffer result = new StringBuffer();
          // We do manual replacement so we can change case
          boolean notFirst = false;
          int grpP = 0, grpA = 0;
          String last = "";
          String now = "";
          while (matcher.find()) {
               grpA = matcher.end();
               if (notFirst) {
                    now = matcher.group().substring(0).toLowerCase();
                    if (grpA - grpP > 1) {
                         matcher.appendReplacement(result, now);
                         result =
                              new StringBuffer(
                                   result.substring(0, (result.length() - 1))
                                        + "_"
                                        + result.substring(result.length() - 1));
                    } else {
                         matcher.appendReplacement(result, "_" + now);
               } else {
                    matcher.appendReplacement(result, matcher.group().substring(0).toLowerCase());
                    notFirst = true;
               grpP = matcher.end();
               ////index++;
               last = now;
          matcher.appendTail(result);
          System.err.println(str + " : " + result.toString());
          return result.toString();
     }succesfully converts :
AccountNmnc : account_nmnc
CustNameJ : cust_name_j
Resume : resume
BeneBrCode : bene_br_code
ApprovedPerson : approved_person
but fails for:
GLCode : glcode
VISHALErrCode : vishalerr_code
GHASUNNAcNo : ghasunnac_no

Can anybody pass on the reverse code. I have one, but
its faulty.Post it, I'm sure we can fix it...

Problem with HTML viewer

Dear All ,
I am facing a problem with HTML Viewer . My senario is as follows :
1. I have created one HTML page . On that page there are 4 Images
2. I imported that HTML page in SAP with the help of transaction SMW0
3. I Called that HTML page in my ABAP program using the method "load_html_document" of class cl_gui_html_viewer
4. This is happening perfectly ok on the machine on which all this developement was done.
But the issue is when I execute my ABAP program on a different machine , those Images on that HTML page are not displaying.
Can you please guide me how to remove that machine dependancy?
Regards,
Nikhil

Hi Nikhil,
Please check if the image is properly imported properly. Also check if there is any option which you might have forgotten while imported like dependeency.
Regards
Abhii...

Problem with Materialized Views after an export

Hi @ everybody,
At an Oracle 11g R2 (11.2.0.3.0) instance, all actual CPU's/SPU's are installed, on a Red Hat 6 Machine i have a problem with Materialized Views from a schema, which i have exportet from an old database machine on Oracle 10g (10.2.0.1.0) to the new machine.
I've exportet with the old exp and imported with imp, because i know, that i get some strange errors because of the materialized views when i'm using the new expdp and impdp tools.
At the old machine the materialized views are so programmed, that they get an update of data at a defined time like this:
START WITH TRUNC(SYSDATE) + 21/24
      NEXT SYSDATE+1
...But after the export this "update function" of the materialized view is not available. So i have deleted that views and recreated them with the START WITH parameters. So now they are running.
But why do i have this problem?
Is this "START WITH" somewhere written as a job or so in, for example, DBMS_SCHEDULER or something else? So i had forgotten to export these jobs or where is that defined?
Is this a bug?
Thanks for answers and help!
Best regards,
David

I can't remember the error of expdp/impdp. That is some days ago, i have to rebuild this.
I think in my scenario for the import i don't need the TABLE_EXISTS_ACTION, because by importing at the new server i've just createt the naked tablespace for the data and the users, not more. So he didn't has something to overwrite.
And i have to tell you: i'm just the dbA. The desining of the tables and materialized views is many years ago by installing the old server. I'm just to young in my company to know about the design of the instance and why it was designed so.
Anyway: my problem is, that after the import of the schemas to a new server the "START WITH" option in the materialized views is not there anymore and i just want to why so i can think about a solution for that and create it with the database designers of my company.
EDIT: And here are the SQL Statements for creating the Materialized Views:
First, at the OLD Server (Oracle 10g 10.2.0.1.0)
CREATE MATERIALIZED VIEW "DUPONT_CCG2_P"."PR_PRODUCT_ITEMS"
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "DUPONT_14523"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1
USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS (SELECT DISTINCT
      PR_CUSTOMER_MASTER_DATA.CLIENT_ID,
      PR_CUSTOMER_MASTER_DATA.ILN_USER,
      PR_ARTICLE.EAN,
      PR_ARTICLE.CODE,
      PR_USED_ARTICLE_TEXT.ARTICLE_TEXT,
      PR_USED_ARTICLE_TEXT.LANG_CODE,
      PR_ARTICLE.SUP_ITEM_NO,
      PR_ARTICLE.OLD_ITEM_NO,
      PR_COMPANY_ITEM_MATCH.ITEM_BY_NO,
      PR_COMPANY_ITEM_MATCH.UOM_UNIT,
      PR_COMPANY_ITEM_MATCH.PRICE_UOM,
      PR_COMPANY_ITEM_MATCH.PRICE,
      PR_COMPANY_ITEM_MATCH.CURRENCY,
      PR_COMPANY_ITEM_MATCH.PRICE_QTY,
      PR_COMPANY_ITEM_MATCH.SALES_UNIT,
      PR_COMPANY_ITEM_MATCH.START_DATE,
      PR_COMPANY_ITEM_MATCH.END_DATE,
      PR_ARTICLE.UPDATED_AT
        FROM PR_ARTICLE, PR_COMPANY_ITEM_MATCH, PR_USED_ARTICLE_TEXT, PR_CUSTOMER_MASTER_DATA, PR_ADDRESS
        WHERE PR_ADDRESS.ORDER_TYPE='REP'
      AND PR_CUSTOMER_MASTER_DATA.ILN_USER=PR_ADDRESS.ILN_USER
      AND PR_COMPANY_ITEM_MATCH.ILN_USER=PR_ADDRESS.ILN_LINK
      AND PR_CUSTOMER_MASTER_DATA.SALES_ORG=PR_COMPANY_ITEM_MATCH.SALES_ORG
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_COMPANY_ITEM_MATCH.CLIENT_ID
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_ADDRESS.CLIENT_ID
      AND PR_ARTICLE.SUP_ITEM_NO=PR_COMPANY_ITEM_MATCH.SUP_ITEM_NO
      AND PR_COMPANY_ITEM_MATCH.SALES_ORG=PR_USED_ARTICLE_TEXT.SALES_ORG
      AND PR_ARTICLE.SUP_ITEM_NO=PR_USED_ARTICLE_TEXT.SUP_ITEM_NO
      AND PR_CUSTOMER_MASTER_DATA.LANG_CODE=PR_USED_ARTICLE_TEXT.LANG_CODE
      AND ( PR_COMPANY_ITEM_MATCH.END_DATE IS NULL OR to_date(PR_COMPANY_ITEM_MATCH.END_DATE,'YYYYMMDD') - sysdate > 0)
      AND ( PR_COMPANY_ITEM_MATCH.START_DATE IS NULL OR sysdate - to_date(PR_COMPANY_ITEM_MATCH.START_DATE,'YYYYMMDD') > 0)
)And here the at the NEW Server (Oracle 11g R2 11.2.0.3.0)
CREATE MATERIALIZED VIEW "DUPONT_CCG2_P"."PR_PRODUCT_ITEMS" ("CLIENT_ID", "ILN_USER", "EAN", "CODE", "ARTICLE_TEXT", "LANG_CODE", "LANR", "OLD_LANR", "ITEM_BY_NO", "UOM_UNIT", "PRICE_UOM", "PRICE", "CURRENCY", "PRICE_QTY", "SALES_UNIT", "START_DATE", "END_DATE", "UPDATED_AT")
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1
BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "DUPONT_14523"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1
USING DEFAULT LOCAL ROLLBACK SEGMENT
USING ENFORCED CONSTRAINTS DISABLE QUERY REWRITE
AS (SELECT DISTINCT
      PR_CUSTOMER_MASTER_DATA.CLIENT_ID,
      PR_CUSTOMER_MASTER_DATA.ILN_USER,
      PR_ARTICLE.EAN,
      PR_ARTICLE.CODE,
      PR_USED_ARTICLE_TEXT.ARTICLE_TEXT,
      PR_USED_ARTICLE_TEXT.LANG_CODE,
      PR_ARTICLE.SUP_ITEM_NO,
      PR_ARTICLE.OLD_ITEM_NO,
      PR_COMPANY_ITEM_MATCH.ITEM_BY_NO,
      PR_COMPANY_ITEM_MATCH.UOM_UNIT,
      PR_COMPANY_ITEM_MATCH.PRICE_UOM,
      PR_COMPANY_ITEM_MATCH.PRICE,
      PR_COMPANY_ITEM_MATCH.CURRENCY,
      PR_COMPANY_ITEM_MATCH.PRICE_QTY,
      PR_COMPANY_ITEM_MATCH.SALES_UNIT,
      PR_COMPANY_ITEM_MATCH.START_DATE,
      PR_COMPANY_ITEM_MATCH.END_DATE,
      PR_ARTICLE.UPDATED_AT
        FROM PR_ARTICLE, PR_COMPANY_ITEM_MATCH, PR_USED_ARTICLE_TEXT, PR_CUSTOMER_MASTER_DATA, PR_ADDRESS
        WHERE PR_ADDRESS.ORDER_TYPE='REP'
      AND PR_CUSTOMER_MASTER_DATA.ILN_USER=PR_ADDRESS.ILN_USER
      AND PR_COMPANY_ITEM_MATCH.ILN_USER=PR_ADDRESS.ILN_LINK
      AND PR_CUSTOMER_MASTER_DATA.SALES_ORG=PR_COMPANY_ITEM_MATCH.SALES_ORG
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_COMPANY_ITEM_MATCH.CLIENT_ID
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_ADDRESS.CLIENT_ID
      AND PR_ARTICLE.SUP_ITEM_NO=PR_COMPANY_ITEM_MATCH.SUP_ITEM_NO
      AND PR_COMPANY_ITEM_MATCH.SALES_ORG=PR_USED_ARTICLE_TEXT.SALES_ORG
      AND PR_ARTICLE.SUP_ITEM_NO=PR_USED_ARTICLE_TEXT.SUP_ITEM_NO
      AND PR_CUSTOMER_MASTER_DATA.LANG_CODE=PR_USED_ARTICLE_TEXT.LANG_CODE
      AND ( PR_COMPANY_ITEM_MATCH.END_DATE IS NULL OR to_date(PR_COMPANY_ITEM_MATCH.END_DATE,'YYYYMMDD') - sysdate > 0)
      AND ( PR_COMPANY_ITEM_MATCH.START_DATE IS NULL OR sysdate - to_date(PR_COMPANY_ITEM_MATCH.START_DATE,'YYYYMMDD') > 0)
)The own differences i can see is at the "header". In the new one is the NOCOMPRESS LOGGING Option and in the first line the code has the columns diretcly defined.
But, i think, for my problem this line is determining:
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1And this line is the same at both server.
Edited by: David_Pasternak on 12.04.2013 00:06

Problems with Street View

new street view from new google map release shows black screen

I'm having similar problems with Street View on openSUSE. For the time being you can try to switch back to the classic Google Maps.
https://support.google.com/maps/answer/3045828?hl=en&ref_topic=3093612

I cant export my pdf to excel - Problem with conversion

I cant export my pdf to excel - Problem with conversion
Somebody is having this problem?

Hi,
May i know what is the challenge you are facing?
Check with another file.
You can try with different browser as well.
Regards,
Florence

Safari is having problem loading messages in gmail. When using other browsers, there is no problem loading and viewing the messages. What is going on? please help!

safari is having problem loading messages in gmail. When using other browsers, there is no problem loading and viewing the messages. What is going on? please help!

I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.

Problems with sending/receiving picture messages

Does anyone know how to sort problems with sending/receiving picture messages on the iphone 4S? I've gone through all the re-setting etc at the place I bought it and it still doesn't work!! Spoken to 02 and they said it's an issue with Apple software?? Any help appreciated.

Can you send/receive SMS's? If so, and you can't send/receive MMS's, and MMS is turned on in Settings, 99.9% of the time the problem is on your carrier's end...most likely MMS is not provisioned properly on your account, regardless of what your carrier is telling you. Call back & have them remove MMS from your account & then re-provision your account for MMS.

Lightroom 4.2 - Experiencing problems with images viewed on 2nd monitor

Hi All,
This problem seems to have started with my updating from 4.1 to 4.2. I have my second monitor set as Loupe - Normal and Fit. As I crop an image on my main monitor, the 2nd monitor view does not always change to the cropped view. If I switch to a different photo and then back to the one I just cropped, the 2nd monitor view will then show the cropped image, but it is almost always blurry. Sometimes I can click the image in the 2nd monitor view to change to a 1:1 view and it will look sharp, and then click again back to Fit and then it too will be sharp. Other times I get a message in the 2nd monitor view that says "no image selected" and bouncing back and forth between a different image will correct this.
This all started off with the majority, but not all cropped images showing as blurred and progressed to what I have described above. I seriously though I had a focus problem with my camera!
Is anyone else experinecing this since updating? Suggestions?
Below is the suggested information to provide...
What version of Lightroom? 4.2
Have you installed the recent updates? Yes, 4.2
What operating system? Windows 7 Ultimate 64 bit
What kind(s) of image file(s)? All images are converted to .dng upon import
If you are getting error message(s), what is the full text of the error message(s)? No error messages.
What were you doing when the problem occurred? I am in the develop module cropping images etc.
What other software are you running? Silver Efex Pro 2, but I have had that installed in many prior versions of Lightroom
Tell us about your computer hardware. How much RAM is installed? 32 GB - Yes, I know - overkill...
How much free space is on your system (C:) drive? 119 GB of 223 GB of my solid state drive c:\
Has this ever worked before? Yes
If so, do you recall any changes you made to Lightroom, such as adding Plug-ins, presets, etc.? No other changes other than updating to 4.2
Did you make any changes to your system, such as updating hardware, printers or drivers, or installing/uninstalling any programs? No, no other changes.
Thanks!

Same problem. Not a soloution, but this may be relevant.
http://forums.adobe.com/message/4782916#4782916
Alan

Problem With Image View After Cropping

Hi All,
I have a problem when I try to crop an image in CS4. The crop tool works perfectly, however sometime the cropped image has parts of the image “out of line” I believe the problem is just with the view, not the actual file. I have saved the image and opened it in MS Picture Viewer and the image is perfect.
I was using Windows XP without a problem. I have only experienced this since I upgraded to windows 7 64 bit.
Below is a screen shot of the problem, not the bottom right of the image. Any suggestions please.
Thanks - Vicki

No, it was me. Feel free to review the thread history at this URL if you'd like: http://forums.adobe.com/message/4206899
Your display driver IS out of date. You really don't want the one from Microsoft's WHQL
If you would like to be able to use the OpenGL-specific features, listed on the page below, as well as not have display corruption, I recommend you update SPECIFICALLY to Catalyst 11.7 (which carries driver version 8.872). Anything up to 11.12 is probably okay, but 12.1 has some very specific problems with Photoshop. Several of us on the forum here have had particularly good, solid results from 11.7.
http://kb2.adobe.com/cps/405/kb405745.html
-Noel

Problem with BMM layer warning messages.

Hi,
I have modelled with the following tables in BMM layer.
Dimension tables: Regions,Countries,Departments, locations, Employees, jobs, job history
Fact table: HR Facts (measured columns like salary, max salary, min salary, commission)
The model is consistent with the following warnings:
Logical dimension table REGIONS has a source REGIONS that does not join to any fact source.
Logical dimension table DEPARTMENTS has a source DEPARTMENTS that does not join to any fact source.
Logical dimension table COUNTRIES has a source COUNTRIES that does not join to any fact source.
Logical dimension table LOCATIONS has a source LOCATIONS that does not join to any fact source.
and also in the answers section (Presentation services) i could not able to view data, it's giving the following error (when i am trying to display REGION NAME field values)
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: REGIONS.REGION_NAME. Please fix the metadata consistency warnings. (HY000).
I could not able to trace the problem where exactly is to be fixed.
regards
chandra kanth.

Hi,
Thanks for the information. Ideally that works out without any hierarchies. But the problem with which i was facing is somewhat different.
Let me explain the problem scenario exactly:
I have an employee, region tables in physical layer. Employee table has SALARY Column. Region table dont have any
join with Employee table. In BMM layer i have created a fact table "HR Facts" and crated a logical fact column SALARY.
The logical fact table source is Employee table. I have drag dropped Region table into BMM layer and joined with HR
Facts table. While consistency check its given a warining message: Logical dimension table REGIONS has a source
REGIONS that does not join to any fact source.
What is the problem exaclty?
regards
chandra kanth.

Problem with MATERIALIZED VIEW (snapshot)

Hi,
I've any problem with creating MATERIALIZED VIEW (snapshot)
My table is ROOMS:
SQL> DESC ROOMS
Name Null? Type
LS_ID VARCHAR2(32)
BL_ID NOT NULL VARCHAR2(32) PRIMARY KEY1
FL_ID NOT NULL VARCHAR2(4) PRIMARY KEY2
RM_ID NOT NULL VARCHAR2(8) PRIMARY KEY3
SITE_ID VARCHAR2(32)
SQL> SELECT COUNT(*)
2 FROM ROOMS;
COUNT(*)
203973
SQL> SELECT COUNT (TOT)
2 FROM (SELECT COUNT(*) TOT, LS_ID, SITE_ID
3 FROM ROOMS
4 GROUP BY LS_ID, SITE_ID);
COUNT(TOT)
11673
I'd like to create one MATERIALIZED VIEW that refresh every 30 seconds when I insert, update or delete on ROOMS table.
I tried this:
CREATE MATERIALIZED VIEW ROOMS_SNAP
BUILD IMMEDIATE
REFRESH complete
START WITH to_date(sysdate,'dd/mm/yyyy hh24:mi:ss')
NEXT sysdate + 30/86400
disable QUERY REWRITE
AS
SELECT LS_ID, SITE_ID
FROM ROOMS
GROUP BY LS_ID, SITE_ID
but when I insert, update or delete one record on ROOMS table, ROOMS_SNAP not refresh.
What I wrong?
How Can I write MATERIALIZED VIEW to maintain synchronization
between ROOMS_SNAP AND LS_ID, SITE_ID by ROOMS?
Thanks

Try this way:
SQL> SHOW PARAMETER JOB
NAME                                 TYPE        VALUE
job_queue_processes                  integer     0
SQL> ALTER SYSTEM SET JOB_QUEUE_PROCESSES=20 SCOPE=MEMORY;
SQL> create materialized view log on emp tablespace jam_ts
2 with rowid, primary key;
Materialized view log created.
SQL> create materialized view emp_mat
2 tablespace jam_ts
3 refresh fast start with sysdate
4 next sysdate + interval '15' second as
5 select * from emp where deptno=30;
Materialized view created.
SQL> update emp
2 set     ename=lower(ename)
3 where   deptno=30;
6 rows updated.
SQL> commit;
Commit complete.
---"After 15 seconds it will be refreshed automatically...."
SQL> select * from emp_mat;
EMPNO ENAME      JOB           MGR HIREDATE      SAL    COMM DEPTNO
   7499 allen      SALESMAN     7698 20-FEB-81    1600     300      30
   7521 ward       SALESMAN     7698 22-FEB-81    1250     500      30
   7654 martin     SALESMAN     7698 28-SEP-81    1250    1400      30
   7698 blake      MANAGER      7839 01-MAY-81    2850              30
   7844 turner     SALESMAN     7698 08-SEP-81    1500       0      30
   7900 james      CLERK        7698 03-DEC-81     950              30
6 rows selected.Message was edited by:
Jameel

Problems with tilt viewer in FLEX

I have a problem with the tilt viewer component in a FLEX
prpoject that uses AS2 and AS3 we can't seem to resolve. Looking
for someone who would like to help us out to fix the problems and
provide assistance in creating a functioning PC and MAC code base.
James Pearson, Project Manager
Metaxpert
[email protected]

"italiantometa" <[email protected]> wrote in
message
news:gk5em7$3s7$[email protected]..
> Hi Amy,
>
> This isn?t spam and I hope you get the email. The tilt
viewer is a
> component
> that allows the images on the screen to be moved about
from a central
> point in
> a see-saw fashion ? kind of like a flat panel can be
tilted
> up/down/left/right.
> I?m looking for someone with FLEX, AS2 and AS3
experience to take a look
> at
> this and fix it for us. Interested?
Is this a Flash component or a Flex component? What's the
issue?

Problem with 2 View Objects based on One Entity -Probably a Bug in ADF BC

Hi
I am using JDeveloper 10.1.3(SU5) and adf faces and ADF BC and to explain my problem I use HR schema.
First, I created 2 view objects based on countries table named as TestView1 and TestView2. I set TestView1 query where clause to region_id=1 and TestView2 query where clause to region_id!=1 in the view object editor and then I created 2 separated form on these 2 view objects by dragging and dropping from data control palette.
Now when I insert a record in the form based on TestView1 with region_id set to 1 and commit the record and go to the next form I can see the record in the second form which is completely wrong since it is against the where clause statement of the second form.
I am really confused and the situation is very wired and it seems to me something like bug in adf bc.Am I right.Is there any work around or solution for solving this problem.
Any help would be highly appreciated.
Best Regards,
Navid

Dear Frank,
Thank you very much for your quick response.
Reading your helpful comments now I have some questions:
1- I have commited the record in the database so shouldn't the query of view objects be re-queried?
2- We try to use ClearVOCaches (entity_name,false) in afterCommit of the base entity object but unfortunately it does not work correctly. after that,We got root app module and used findViewObject method to find all the view of that entity (we have found them by using name not automaticlly) and called executeQuery of all views. From my point of view it has 2 big disadvantages. First suppose that this entity is an important entity and 4 or 5 viow objects are based on it. Now, For inserting one record we should re-execute 4 or 5 view which I think makes some performance issues. Besides, If during the development one programmer add a new view object based on this entity and don't add the executeQuery in the afterCommit for this view, again we have the same problem. Isn't there at least a way that automatically refresh all related view objects however the performance issue still exists.
3- You mentioned that this issue is handled in the developer guide. Could you kindly give me a refrence which developer guide you mean and which section I should read to overcome this problem.(I have ADF Developer's Guide for Forms/4GL Developer's Guide , however I search for clearVOCaches and surprisingly nothing was found!!!)
4- Could you please give me some hints that from your point of view what is the best method to solve this problem with minimum performance effect.
Any comment would be of some great help.
Thanks in advance,
Navid

Problem with conversations view in messages

Similar Messages

Maybe you are looking for