Problem with convert_otf Ecc 6.0

Can you help with this?
So basically we are focussed on why convert_otf is behaving differently in ECC 6 and its working fine in 4.6C. Fields were getting clipped in the final output is what we found in the debugger and the logo did not show up when we saved a copy of the program as a local object
Thanks
Mike

I have a similar issue. In CRM 3.0 everything is fine but in 5.0 the .pdf file is not being created properly. I've traced it back far enough to see that the otf table is not being constructed properly. It's different in the new system (much smaller) so when convert_otf is called the pdf file is unreadable.
Anyone help?
Matt

Similar Messages

Problem with 'CONVERT_OTF'

Hi,
We send email confi to the customer along with a PDF attachment that contains the information regarding the material, quantity, price etc. In the program I used CONVERT_OTF to convert OTF format to PDF and sending the mail using 'SO_DOCUMENT_SEND_API1'. The problem is, the material number 'VJ0402A3К3KXJ' is converted to 'VJ0402A33KXJ' (observe carefully character 'K' 9th position is removed ) automatically.
Similarly 'VJ0402A7К7KXJ' is converted to 'VJ0402A77KXJ' ;'VJ0402A9К9KXJ' is converted to 'VJ0402A99KXJ' .
We do not have any material conversion in the program logic. Can you please let me know the reason/solution?
Thanks in advance,
Arjun

Arjun,
That is not a "K" (Unicode Character 'Latin Capital Letter K' (U004B)). It is a different character "К". I believe it is Unicode Character 'Cyrillic Capital Letter KA' (U041A). On a windows machine, ALT+41A
It is usually undesirable from a business perspective to mix similar Roman and Cyrillic characters in the same object. It sounds like your conversion routine is not expecting Cyrillic characters. Before you invest much time with this, ensure that the Material number has been properly created.
Best Regards,
DB49

Problem with CONVERT_OTF, special character '-' printing not properly

Hi experts,
when printing PO item text; in Print Preview, text displays correctly. But in program by using 'CONVERT_OTF' FM output is converting into PDF and this PDF is send it to the PO creator through mail, In the PDF present in the mail, the special character ' - ' is not displaying properly; i.e the special character ' - ' is replaced by ' ' space. For the text we are using Text editor and Font family is 'COURIER' , device type is 'PDF'. And also i tried with different Font fammilies, for that it beheaves differently but not displays as it is the special character ' - '.
Thanks and regards
Aumprakasharya T

Hi,
Which device type is used to create the PDF? i.e. which deivce type is used in the OTF data that is converted to PDF? If you use device type PDFUC or SWINCF, then it should work fine. (see SAP not #999712 about unicode PDF conversion)
Regards,
Aidan

Problem with DDR ECC

Hello Friends!
I am in trouble!I've got a MSI-746f with 746FX SiS chipset, the original Bios firmware, AMD Atlhon Xp 2200+, and a single Stick of DDR 266mhz 1024mb ECC PC2100 that won't work!
This DDR module is perfectlly working in a server (Made by IBM) but in my mainboard no !If someone can help me I'd be happy!!
Thank you very much

registered ECC
were is the word registered in your first post or the second
i suggest you lighten up
as im not prepared to donate my time for free
to people with your kind of attitude

Error while posting GR from EWM in ECC. "Problem with receiver finding"

Hi
I have completed putaway of inbound delivery in EWM. This has triggered PPF to ECC for GR posting. This is stuck in ECC SMQ2 with error "Problem with receiver finding".
I have checked ECC>EWM interface configuration. Handling unit management setup in ECC and EWM. Do not see any issues there. Also tested GR account postings with IM storage location for Po in ECC. This is also working fine...so no issue with account determination.
Unable to figure out what is causing issue. Please help. Thank you.
Best Regards
phani sai MN

Hi All
Thanks for your responses. Issue was with distrubution model fiter parameters. for message type InboundDelivery.Deliverychange there was additional filter parameter for logical system. Removed values for logical system and only retained warehouse number.
With this issue is resolved. GR is posted succesfully in ECC.
Best Regards
Phani sai MN

URGENT : EP 7.0 /ECC 5.0 - Problem with Business Package : ESS/MSS

Dear Portal Gurus,
We are facing a problem with business package for ESS/MSS
Our system Info is as under :
Portal:- NW 2004s
ERP2004: - (R3 ECC 5.0)
ESS:- BP for Employee Self-Service (mySAP ERP 2004) 60.2
MSS:- BP for Manager Self-Service (mySAP ERP 2004) 60.1.1
SAP XSS à (SAP ESS 100, SAP MSS 100 and SAP PCUI_GP 100 , all upto SP 12)
After the Business Packages were installed,found that some ess apps where not deployed...so manually deployed it.
The JCO connections are OK.
Do we need to set up the backend Homepage Framework for the same......even for preview.....was thinking not.
Also, here is the error and exception that we get when we preview any ESS iview.
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
You dont have the authorization to start service sap.com/pcui_gp~xssutils/XssMenuArea.
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: You dont have the authorization to start service sap.com/pcui_gp~xssutils/XssMenuArea.
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.initBackend(BackendConnections.java:234)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModel(BackendConnections.java:159)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.connectModel(InternalBackendConnections.java:183)
Thanks.
Message was edited by: Ashutosh Rana

I got the same problem :/
not the authorization, but the fields in working time is displaying wrong.. (too big)
Any solution to this?
Best Regards
Kristoffer Engh

Problem with ITS after ECC 6.0 upgrade

Hi All,
I am facing problems with customized ITS application created based on CATW. It does not work properly after an upgrade to ECC 6.0 from 4.7. Some of the screens user interface is different when i compared that of with 4.7. I came to know that ECC 6.0 uses the Integrated ITS where as 4.7 uses the Stand-alone ITS. What is the difference between them? Is there any way to deactivate the Integrated ITS and run the application on ECC 6.0 as it was before on 4.7?
Any help much appreciated.
Thanks,
Naga Bokkisam

Hello Naga,
can you be more specific about the differences between 4.7 and ECC 6.0? Are you using the SAP GUI for HTML (~webgui 1)?
With best regards,
T. J. Domsalla

Problem with PDF content generated by CONVERT_OTF

Hi,
We are facing a problem with the version of the pdf content generated by FM CONVERT_OTF.
Data returned by this FM in the parameter BIN_FILE is in XSTRING or HexaDecimal Format.
As I am sending this PDF content to a Portal through RFC, they are unable to open the file in lower versions of Adobe.
The file is opened only in 8 and above versions of Adobe.
Is there anything which can be done in SAP so that the PDF content generated in SAP will be opened in the lower versions also.

Can you try with the belos stuff?
Converting to PDF
          CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
            EXPORTING
              src_spoolid              = loc_spool (pass spool number here)
              no_dialog                = ' '
            IMPORTING
              pdf_bytecount            = numbytes
              pdf_spoolid              = pdfspoolid
              btc_jobname              = jobname
              btc_jobcount             = jobcount
            TABLES
              pdf                      = pdf
            EXCEPTIONS
              err_no_otf_spooljob      = 1
              err_no_spooljob          = 2
              err_no_permission        = 3
              err_conv_not_possible    = 4
              err_bad_dstdevice        = 5
              user_cancelled           = 6
              err_spoolerror           = 7
              err_temseerror           = 8
              err_btcjob_open_failed   = 9
              err_btcjob_submit_failed = 10
              err_btcjob_close_failed = 11.
Map PDF table into 'flat' table acording to Unicode flag
        LOOP AT pdf INTO wa_pdfline.
          ASSIGN wa_pdfline TO <l_xline> CASTING.
          CONCATENATE pdf_xstring <l_xline> INTO pdf_xstring IN BYTE MODE.
        ENDLOOP.
Use this PDF_XSTRING as the output of the RFC and same you can use it JAVA webdynpro. I hope this will provide the solution
Let me know if you still have any problem
Best Regards,
JR

Problem with UE ZXKKEU11 in ECC 6.0

Hi Guys,
I have a problem with UE ZXKKEU11.
When it was called from VA01 during material insert, the structure i_copa_item is empty and I don't know why.
Have you got any suggestion???
Thank you in advance for any useful answer
If you could I need help urgently. thanks.
Edited by: Salvatore Bruno on Jan 15, 2009 6:59 PM

Hi Salvatore,
Could you help me? I face the same problem you posted some moths ago. In your last message of the thread you said, "The problem was in KEDR configuration".
What was wrong in your configuration?
Thanks in advance 4 ur answer.
llr

Problem with PRD upgrade from 4.6C to ECC 6.0

Hello,
I'm experiencing a problem with our live Productive system, and hoping for some ideas on how to resolve. First, we have successfully upgraded our DEV and QA environment, and are now upgrading PRD. I was successful in getting through the uptime SAPup of our downtime minimized upgrade. Note that I did not need to log into the Shadow instance at all, because all modifications will be transported from DEV during downtime.
However, I did want to log into the Shadow instance to take a look at it. I first had to start the instance in the SAP Management console, and then when I attempted to access via the SAPGUI, I recieved error "Internal TSKH error. Session terminated". Also, I noticed that as soon as I started up the Shadow instance, I am now getting "SYSTEM_CANT_CLEAR" short dumps every minute. Error says: Error when initializing the work area "SYST".
Since I don't need to log into the Shadow instance to complete the upgrade, I'm not sure if this is going to be an issue for me or not while I complete the upgrade.
Any assistance would be greatly appreciated.
Thank you,
Leeanna Travis

Hello,
I'm experiencing a problem with our live Productive system, and hoping for some ideas on how to resolve. First, we have successfully upgraded our DEV and QA environment, and are now upgrading PRD. I was successful in getting through the uptime SAPup of our downtime minimized upgrade. Note that I did not need to log into the Shadow instance at all, because all modifications will be transported from DEV during downtime.
However, I did want to log into the Shadow instance to take a look at it. I first had to start the instance in the SAP Management console, and then when I attempted to access via the SAPGUI, I recieved error "Internal TSKH error. Session terminated". Also, I noticed that as soon as I started up the Shadow instance, I am now getting "SYSTEM_CANT_CLEAR" short dumps every minute. Error says: Error when initializing the work area "SYST".
Since I don't need to log into the Shadow instance to complete the upgrade, I'm not sure if this is going to be an issue for me or not while I complete the upgrade.
Any assistance would be greatly appreciated.
Thank you,
Leeanna Travis

A problem with return order with free goods

Hello
I am working on ECC 6.0
I am facing a problem with the return order the case is I created an order of 1000 pc with inclusive free goods (w/o item generation) condition record that for every 10 pc over the 100 the customer will take 1 free pc
1 pc = 10 $
100 pcs = 900 $
120 = 1080 $
the problem when I am creating a return order with 30 pcs the system calculate the price as if there are free goods the system returns the 30 pcs with 270 $ instead of 180 $ and it should not calculate the free goods because the remaining items are 90 pcs that should not take a free goods discount
Regards
Jacopo Francios

hi ,
Such scenerios can be tackled by different pricing procedure in return scenerio.
See Pricing procedure Depends on sales area + customer pricing procedure + Document pricing procedure .
So for Return document type please maintain different pricing than the normal scenerio this will solve ur problem.
This is generally done also for tackling such scenerios.
Thanks & Regards

IDES installation problem with DDIC password

Hello everybody,
After hours of searching and trying..
I have here a problem during a local installation of IDES ECC 6.0 on Windows Server 2008 with MAXDB. The installation stops in phase 27 of 29 u201Ccheck DDIC passwordu201D - test logon to SAP system failed, with the error message FRF-00007 "Unable to open RFC connection" in sapinst.
The MMC shows in the process list that the following processes stands oon "green": igswd, mag_Server and disp+work are running. The message of servers connection is OK, acts dialogue queue time is 0.00 sec.
I have already searched the forum, but I am not able to logon as user SAP* with u201C060. u2026u201D or as user DDIC with the password u201C199. u2026u201D to change the DDIC password to my password set during the installation (transaction -S000 / SU01). The login fails over the MMC as well as over the SAP GUI 7.10. I have tried this on the client 000, 001 and 800. The error message is u201CSAP Logon Failed - connection closed without message (CM_NO_DATA_RECEIVEDu201D). The SAP GUI gets down with "Work process restartet, session terminated".
What can help to solve the problem? Can it be a problem with the ms loop adaptor? Which static address IP must assign to the loop adaptor? Did i have to update the kernel of the data bank or is this not necessary? Can the information from dev_w help?
Can this link help me: BI 7.0 Installed but errored out during DDIC password check !!!!!!!
Thanks in advance
Lenvy
Edited by: Lenvy Gee on Sep 6, 2009 2:30 AM
Edited by: Lenvy Gee on Sep 6, 2009 2:34 AM

Good Morning everybody,
I started a next try, the mmc is running on green, the login starts up and......failed.
So the network setting seems to be correct.
The log files included following:
..........................................(just the last lines).............................
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server BASIS_A23_00 on host BASED (wp 0)
M * ERROR       ThSigHandler: signal
M *
M * TIME        Mon Nov 26 08:06:26 2009
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          11
M * MODULE      thxxhead.c
M * LINE        10688
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M Entering ThSetStatError
M ThIErrHandle: incomplete previous roll out, do a full roll out
M ThRollOut: roll out T17/U25/M0/I0 (level=7, short_roll_out=0)
M ThRollOut: call rrol_out (1)
M ThRollOut: act roll state = DP_ROLLED_OUT
M ThRollOut: roll level <> 0, don't call ab_rollout
M ThRollOut: full roll out of U25 M0 I0 (Level 7) ok
M ThIErrHandle: prv_action of W0: 0x8
M ThCallDbBreak: use db_sqlbreak
C CANCEL rejected, because there is no SQL statement active
M ThIErrHandle: don't try rollback again
M ThIErrHandle: call ThrCoreInfo
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
M ThContextId: context_id = >0001700020019C010D31F2D5BD12D1714B103838<
M ThContextId: context_id_uuid = {29019C01-7F24-F235-BD12-D1714B103838}
M ThGetTransId2: got trans id (spa) >29019C017F24F239BD12D1714B103838< (32)
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
M RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 000000000F67D3C8/0000000000000000/0/0/1
M RmCleanUpResources3: no resources registered
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_RETURN
M ThIErrHandle: ThrCoreInfo o.k.
M ThIErrHandle: Entering ThReplyToMsg
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (11)
M ThErrHdlUser: save context
M ThEmContextDetach2: detach T17/M0 from em memory (em_hdl=0, force=0)
M ThEmContextDetach2: reset local em info
B Disconnecting from ALL connections:
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       YES YES NO 000 255 255 20401126 080533 BASIS
C Disconnecting from connection 0 ...
C Now I'm disconnected from SAP DB
B Disconnected from connection 0
B statistics db_con_commit (com_total=4, com_tx=0)
B statistics db_con_rollback (roll_total=1, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 816) [dpnttool.c   327]
M return from clean-up function ...
and:
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        A23
systemid   562 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    144
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        2928
Mon Nov 26 08:03:01 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2928) [dpxxdisp.c   1243]
     shared lib "dw_xml.dll" version 144 successfully loaded
     shared lib "dw_xtc.dll" version 144 successfully loaded
     shared lib "dw_stl.dll" version 144 successfully loaded
     shared lib "dw_gui.dll" version 144 successfully loaded
     shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Nov 26 08:03:10 2040
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 9 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >BASIS_I23_00                            <
DpShMCreate: sizeof(wp_adm)          25168     (1480)
DpShMCreate: sizeof(tm_adm)          5652128     (28120)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm)          552080     (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1864)
DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000D800050, size: 6348592)
DpShMCreate: allocated sys_adm at 000000000D800050
DpShMCreate: allocated wp_adm at 000000000D802150
DpShMCreate: allocated tm_adm_list at 000000000D8083A0
DpShMCreate: allocated tm_adm at 000000000D808400
DpShMCreate: allocated wp_ca_adm at 000000000DD6C2A0
DpShMCreate: allocated appc_ca_adm at 000000000DD72060
DpShMCreate: allocated comm_adm at 000000000DD73FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000DDFAC30
DpShMCreate: allocated gw_adm at 000000000DDFACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000DDFACE0
DpShMCreate: allocated wall_adm at 000000000DDFACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 4093MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 4096MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1633]
***LOG Q0K=> DpMsAttach, mscon ( BASIS) [dpxxdisp.c   11822]
DpStartStopMsg: send start message (myname is >BASIS_I23_00                            <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Nov 26 08:03:11 2040
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 144
Release check o.K.
Mon Nov 26 08:03:17 2040
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Mon Nov 26 08:04:26 2040
SoftCancel request for T17 U18 M0 received from IC_MAN
SoftCancel request for T19 U20 M0 received from IC_MAN
ERROR => DpWpKill(3092, SIGUSR2) failed [dpxxtool.c   2496]
Mon Nov 26 08:04:30 2040
ERROR => DpHdlDeadWp: W0 (pid 3200) died [dpxxdisp.c   14532]
Mon Nov 26 08:04:31 2040
ERROR => DpHdlDeadWp: W1 (pid 3220) died [dpxxdisp.c   14532]
DpHdlDeadWp: restart wp (pid=3092) automatically
ERROR => DpHdlDeadWp: W3 (pid 3296) died [dpxxdisp.c   14532]
DpHdlDeadWp: restart wp (pid=3268) automatically
ERROR => DpHdlDeadWp: W10 (pid 2032) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W15 (pid 3312) died [dpxxdisp.c   14532]
Mon Nov 26 08:04:45 2040
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c   6971]
Mon Nov 26 08:05:10 2040
ERROR => DpHdlDeadWp: W4 (pid 3260) died [dpxxdisp.c   14532]
Mon Nov 26 08:05:30 2040
ERROR => DpHdlDeadWp: W0 (pid 3788) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W1 (pid 2108) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W6 (pid 3108) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W15 (pid 464) died [dpxxdisp.c   14532]
Mon Nov 26 08:05:33 2040
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c   6971]
The kernel is not patched. I just (try) to install the kernel files from the sap market place
IDES download destination. The install kernel file was: 51033508_7 - NW7 SR3 Kernel 7.00 for Windows / LNX X86_X64. I got an update / upgrade file, which is called: 51033508_8 - NW7 SR3 Kernel .... Upg ABAP.
Can anybody give me an adwise by reading those logfiles? Is the file ok for updating the kernel?
How do I upgrade the kernel by having no .exe - file? May the installation go on after patching the kernel?
Thanks you really much
Lenvy

Problem with RFC connection - tp program not registered

Hello everyone
recently there has appeared a problem with the RFC connection on our system - we received the following set of messages:
Trace file opened at 20101221 130738 Central European Standard Time, SAP-RE
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Tp program is not registered.
ABAP Programm: RSRFCPIN (Transaction: SM59)
User: xxx(Client: 100)
Destination: SIDRFC_IFSAPHRCZPKCP (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Program transakcji nie jest zarejestrowany
DEST =SIDRFC_IFSAPHRCZPKCP
HOST =%%RFCSERVER%%
PROG =IFCZPKCP
GWHOST =ssapprod
GWSERV =sapgw21
I tried to register program with a command:
rfcexec -aIFCZPKCP -gssapprod -xsapgw21
but with no success - the program didn't appear on the list of logged clients on the system in gateway monitor. Frankly speaking we do not know now what else we can do - please help!
We have ECC 6.0 (SAP_BASIS 700 SP18) on Windows Server 2003 R2 x64.
Thanks in advance for any help.
Regards
Peter

Hi Salim
thanks for your reply.
./rfcexec -a(PROG_ID) -gssapprod -xsapgw21 &
The syntax you're providing refers to UNIX systems, but I did similar thing on our Windows system - I tried all of the following methods (unfortunatelly without success):
rfcexec -a(PROG_ID) -gssapprod -xsapgw21
full_path_to_rfcexec.exe -a(PROG_ID) -gssapprod -xsapgw21
rfcexec -a(PROG_ID) -gssapprod.domain -xsapgw21
full_path_to_rfcexec.exe -a(PROG_ID) -gssapprod.domain -xsapgw21
Can you advise me what to do now?
Thanks
Piotr

Problem with material and document date in sales order

Hi All,
I am working in ECC 6.0 .I am facing problem with two fields when in enter in to sales order(tcode:va01)
1.A material comes automatically in line item.
2.Document date also comes as 27.03.2008 instead of todays date in each order i create.
I think its not related to configuration.I think its related to some modifications through exits or enhancement points.could someone suggest me a where to check and solve that.
Your's suggestion is appreciated.

Hi Sharad,
Check MV45AFZZ include in se38..It is a user exit for basic validation on sales...We may be able to find some code there (if screen data is predefined by code as mentioned)
Hope it helps
Regards
Byju

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Problem with convert_otf Ecc 6.0

Similar Messages

Maybe you are looking for