Problem with Converter

Problem with Converter. When I save a PDF it is saved as a Word document and I cannot open it. What is the problem? I have uninstalled the Converter, but it continues to save PDF as Word.

I cannot open the file with Word. I am not trying to convert the file at
all. When I save a PDF and then try to open the file, it is saved as a
Word document and it will not allow me to open it.
On Wed, Mar 26, 2014 at 9:58 AM, Claudio González

Similar Messages

Problem with converting .RIFF : I still cannot transfer RIFF file to ipod

Snitch
Posts: 13
From: Cali
Registered: Feb 13, 2006
Problem with converting .RIFF to mpeg4 even tho its a mpeg
Posted: Jun 2, 2006 2:19 PM
1st problem trying to convert mpeg video thru ipod converter. I have successfully converted DVD`s and other downlaoded videos but this is the 1st time i ran into a wall.
I am using GSPOT CODEC software and it says its a "riff- wrapped " file. When I open up Videora converter it doenst do anything meaning no green bars to show its progressing into mpeg4 format. It does finish and it goes to finish videos but when I try to manually put it in my I-tunes it doenst do anything. Why i am posting this. I am frustrated. WHAT -and it appears to be mpeg - the heck is RIFF wrapped file? Please help I have GUNS n ROSES live at ritz 1988 rare footage andI want it on my ipod and It does play in my windows media player so its a true video with sound
Intel P4 Windows XP Black 60 GB Video w/ Agent 18 shield
Johnathan Burger
Posts: 1,450
Registered: Jul 27, 2005
Re: Problem with converting .RIFF to mpeg4 even tho its a mpeg
Posted: Jun 3, 2006 1:38 AM in response to: Snitch
Never heard of RIFF, so I did research and found these sources: http://ccrma.stanford.edu/courses/422/projects/WaveFormat/
http://en.wikipedia.org/wiki/RIFF
Good luck.
17" iMac 1.8ghz G5 2GB 12 iBook 1.2ghz 512mb 5th gen iPod Mac OS X (10.4.6) Microsoft Free since '92
Pages: 1 Back to Topic List

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

What is the problem with converting objects with gradients to gradient mesh?

What is the problem with converting objects with gradients to gradient mesh?

slange,
There may arise some smaller corruption states that may be cured by what you did, as you can see in the list. Sometimes, restarting thrice is needed.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Problem with converted PDF from OTF

Hello,
im having a problem with character interpretation in PDF document when i convert it from OTF.
At the moment im using Arial true type font in my smartform, im using function module CONVERT_OTF to convert OTF to PDF.
When i open PDF document with Adobe reader it looks fine, but the problem is when im trying to convert PDF file to other format for example PNG, or trying to copy and paste text from PDF document.
im getting Klaipìda instead of Klaipėda, it seems that baltic symbol "ė" is interpreted like "ì", other baltic symbols are interpreted as they should, there is problem only with character "ė".
have anyone faced that kindof problem? or maybe anyone know the solution for this problem? if so please tell me.
Best regards,
Rimantas Sebeckis.

Hi Rimantus,
Did you check the fonts installed in your system,,,
As PDF is a unchangeable format, it doesnt depend upon the installed fonts in the system,,
but when you copy, you need some fonts in system,, if not you will get the same problem,,,
Thanks & regards,
Dileep.C

Problem With Convert to symbol

I am having a stupid problem with the convert to symbol
function in Flash 8 pro. When I import to library and then convert
my first symbol, everything works fine. But then when I try to
convert another piece of art to a symbol, it becomes the same
symbol as before. so i can only convert 1 symbol. This just started
happening. I'm converting to graphic symbols, and I have even
uninstalled and reinstalled. Has anyone else had this
problem?

if you are trying to convert a symbol from a frame that
applied motion tweening, & the option "Sync" is
selected...

Abobe v8: Problems with converting from word 2003 to PDF

I use one of those free conversion tools, since i am a student. My problem is that i have a word document with a unique page margin. When i convert from word 2003 to pdf everything gets converted except the page margin which is much bigger then it's supposed to be. Do anyone know how i can fix that?, any help are appriciated.
Kindly Erik

You cannot fix anything in Reader. If you have a problem with the tool
used to create your pdf, please ask in their forum.
Mike

Printing problem with converted AW files

I've searched the forum for an answer to this to no avail, so here goes...
My wife recently bought a Mac mini as an upgrade to her "classic" iMac. I've managed to get the majority of her old files transferred over to the new machine but recently ran across a frustrating problem. She has created many files on her old machine using AppleWorks 5.0.3 and wants to use these files on her new machine using AW 6.2.9. The files open and edit fine, but when we go to print, her HP DeskJet 832C bucks and coughs and tries to print but only gets about 3/4 through the first page then stops. I've checked to make sure the printer driver is current and also reinstalled AppleWorks, but the same problem occurs. Any new files she creates using AW 6.2.9 print just fine and other software on the computer prints docments OK, too (PDFs, calendar, etc.). It appears to be just the converted AppleWorks files that complain. I can even copy the text from an old file to a new file in AppleWorks and THAT prints fine, but that's a hassle. Any ideas on this problem? Any help you can give would be appreciated. Thanks.
Mac mini Mac OS X (10.4.3)

Mac OS is "confused" about what program these files belong to & so gives them a generic one. This can be a result of not using Disk Utility to repair permissions after a system update. It is easily fixed.
Highlight a known AppleWorks document in the Finder, highlight it & choose Get Info from the File menu. In the Get Info box, click the triangle next to "Open With." Click on this drop-down menu & choose AppleWorks 6. If AppleWorks 6 is not a choice, choose "Other" & navigate to the AppleWorks 6 application. Now click the "Change" button under the text that asks if you want to open all documents like this with AppleWorks 6.
Sometimes it can happen if files are transfered from one Mac to another using a PC-formatted disk. I have written a user tip dealing with this, AppleWorks 6 won't open my AW 5 files. Even though the title says AppleWorks 5 files, it also applies to not being able to open AppleWorks 6 files.
Peggy

Problems with converted .MTS files in Final Cut Express 4

I have a hard drive full of video shot and a consumer grade HD camera in the .MTS format.
After struggling with finding an acceptable converter, I finally bought iSkysoft's Video Converter.
I've been using the converter's output preset of "MP4 Format for Final Cut X" and "High definition MP4 format" settings and they both yield the same results.
Now I am having problems simply editing the footage in FCE4.
I can take the footage and set i/o points in them but when I drag clips into the timeline, it often hangs up, locks up, FCE is unresponsive and it's even crashed.
This is on a 2 x 3.2 GHz Quad-Core Intel Mac running 10.6.8.

In order to use .mts video in Final Cut Express, you need to convert the video to QuickTime/Apple Intermediate Codec before importing into FCE. .mts video files are typically H.264 video, highly compressed and is not something that FCE can edit. Ditto for "MP4 format for FCPX or HighDef MP4 format". If iSkysoft cannot convert to QT/AIC then I suggest Clipwrap
Note: for the future, if your camcorder is an AVCHD camcorder you can directly ingest the video from the camcorder into FCE.

Encoding problem with convert and CLOB involving UTF8 and EBCDIC

Hi,
I have a task that requires me to call a procedure with a CLOB argument containing a string encoded in EBCDIC. This did not go well so I started narrowing down the problem. Here is some SQL to illustrate it:
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL> select value from v$nls_parameters where parameter = 'NLS_CHARACTERSET';
VALUE
AL32UTF8
SQL> select convert(convert('abc', 'WE8EBCDIC500'), 'AL32UTF8', 'WE8EBCDIC500')
output from dual;
OUT
abc
SQL> select convert(to_char(to_clob(convert('abc', 'WE8EBCDIC500'))), 'AL32UTF8', 'WE8EBCDIC500') output from dual;
OUTPUT
╒╫¿╒╫¿╒╫¿
So converting to and from EBCDIC works fine when using varchar2, but (if I am reading this right) fails when involving CLOB conversion.
My question then is: Can anyone demonstrate how to put correct EBCDIC into a CLOB and maybe even explain why the examples do what they do.

in order to successfully work with xmldb it is recommended that you use 9.2.0.4
and above. Its seems to have lower version.
Okay now related to the problem , if your data that you want to send to the attributes are not greater than 32767, then you can use the pl/sql varchar2 datatype to hold the data rather then CLOB and overcome this problem.
here is the sample. use function with below pl/sql to return the desired output.
SQL> declare
2   l_clob     CLOB := 'Hello';
3   l_output   CLOB;
4 begin
5    select xmlelement("test", xmlattributes(l_clob AS "a")).getclobval()
6      into l_output from dual;
7 end;
8 /
select xmlelement("test", xmlattributes(l_clob AS "a")).getclobval()
ERROR at line 5:
ORA-06550: line 5, column 44:
PL/SQL: ORA-00932: inconsistent datatypes: expected - got CLOB
ORA-06550: line 5, column 3:
PL/SQL: SQL Statement ignored
SQL> declare
2   l_vchar     varchar2(32767) := 'Hello';
3   l_output   CLOB;
4 begin
5    select xmlelement("test", xmlattributes(l_vchar AS "a")).getclobval()
6      into l_output from dual;
7    dbms_output.put_line(l_output);
8 end;
9 /
<test a="Hello"></test>
PL/SQL procedure successfully completed.

Problem with converting RTF to TXT

When I convert RTF content to text format with
JTextPane jtp = new JTextPane();
jtp.setContentType("text/rtf");
jtp.setText(original_text);
Document doc = jtp.getDocument();
String converted_text = doc.getText(0, doc.getLength());All non-ascii characters are changed to "??????". What should I do about it?

Does your document follow those rules? I'm not sure if my document follows those rules. My
document is generated by some other software (like MS
Word)Okay, then just get an ordinary text editor (WordPad would be okay) and look at the beginning of the file to see just what it looks like.
And when you read your document into the textcomponent... or into this "original_text" variable...
are you specifying the file's encoding?
No, I did not specify the file's encoding. Maybe this
will solve the problem. But how do I specify the
encoding? Please kindly advise :)You need a java.io.InputStreamReader to specify the encoding. Check out the API documentation for more information (Java 1.4 uses the term charset instead of encoding, but it's the same concept); your code might look like this:Reader fr = new InputStreamReader(new FileInputStream("zap.rtf"), "yourencoding");

Problem with converting GF1 raw files

I recently bought a Panasonic Lumix GF1 and use raw. However, my CS3 and Element 6.0 is not able to read the DNG files that I have created through Adobe DNG Converter. It doesn't seem to matter that I updated the Converter to 6.3. It creates DNG files, but none of my image processing soft ware can deal with them.
I have also used a Canon G11 for almost a year and converted the CR2 raw files without problem.
Please help me! Anyone!

New problem discovered: My RW2 files of about 11-12 MB are converted to 40-41 MB DNG files. How is this possible?

Problem with converting .RIFF to mpeg4 even tho its a mpeg

1st problem trying to convert mpeg video thru ipod converter. I have successfully converted DVD`s and other downlaoded videos but this is the 1st time i ran into a wall.
I am using GSPOT CODEC software and it says its a "riff- wrapped " file. When I open up Videora converter it doenst do anything meaning no green bars to show its progressing into mpeg4 format. It does finish and it goes to finish videos but when I try to manually put it in my I-tunes it doenst do anything. Why i am posting this. I am frustrated. WHAT -and it appears to be mpeg - the heck is RIFF wrapped file? Please help I have GUNS n ROSES live at ritz 1988 rare footage andI want it on my ipod and It does play in my windows media player so its a true video with sound

Never heard of RIFF, so I did research and found these sources: http://ccrma.stanford.edu/courses/422/projects/WaveFormat/
http://en.wikipedia.org/wiki/RIFF
Good luck.

Problem with converting data types

Hi Experts,
I am stuck up with a little problem, i need your help
i am converting all the data types to CHAR but i am not getting the expected data out.........
My code is as below...where do i go wrong...
LOOP AT <T_ITAB> ASSIGNING <FIELD>.
DO.
   ASSIGN COMPONENT SY-INDEX OF STRUCTURE <FIELD> TO <RECORD>.
   IF SY-SUBRC = 0.
      LV_FIELD = <RECORD>.
      N = STRLEN( LV_FIELD ).
      IF N = '8'.
           IF LV_FIELD IS NOT INITIAL.
                  LV_DATE = LV_FIELD.
                  CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
                          EXPORTING
                          DATE                     = LV_DATE
                         EXCEPTIONS
                                PLAUSIBILITY_CHECK_FAILED = 1
                                OTHERS                     = 2.
                         IF SY-SUBRC <> 0.
                                MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
                         ENDIF.
                     IF SY-SUBRC EQ 0.
                        CONCATENATE LV_FIELD+6(2) LV_FIELD+4(2) LV_FIELD+0(4) INTO LV_FIELD SEPARATED BY '.'.
                    ENDIF.
            ENDIF.
         ENDIF.
            IF LV_RECORD IS INITIAL.
                     LV_RECORD = LV_FIELD.
            ELSE.
                   CONCATENATE LV_RECORD LV_FIELD INTO LV_RECORD SEPARATED BY ' * '.
           ENDIF.
       ELSE.
     EXIT." DO
    ENDIF.
   ENDDO.
APPEND LV_RECORD TO LT_OUTPUT.
CLEAR LV_RECORD.
ENDLOOP.
THE TABLE LT_OUTPUT     LIKE     THENV(CHAR 255)
My output looks some thing like this:
04 36876   15.09.2011 39600   1999
06 36960   15.09.2011 39600   2632
07 36874   15.09.2011 39541   9232
My expected output
04    36.876 15.09.2011    39.600 1.999
06    36.960 15.09.2011    39.600 2.632
07    36.874 15.09.2011    39.541 9.232
Regards
sam

At run time you can see all the data........ like what i have shown...
but if you clearly see, DATE will be in the internal format..but if you print it, it will be in dd:mm:yyyy
can you suggest me if i have a dynamic field symbol (table data) ,,,, How can i convert data types dynamically..
if it is a static internal table i am achieving with WRITE TO statement.....but i have huge data in field symbols...
Instead of all these , please specify the exact problem your are facing . What is it with date field ? . In SAP while printing the internal format will be converted to external. What is your requirement with this date field?
My output looks some thing like this:
04 36876 15.09.2011 39600 1999
06 36960 15.09.2011 39600 2632
07 36874 15.09.2011 39541 9232
My expected output
04 36.876 15.09.2011 39.600 1.999
06 36.960 15.09.2011 39.600 2.632
07 36.874 15.09.2011 39.541 9.232
I dont see any problems mentioned in your date field. Both your actual and expected outputs reflects the same in date field.
In SCN you will only get solutions if your question is precise.
Kesav

Ffmeg.exe stackdump problem with converting

I bought "Digital Media Converter 2.7" to convert tv recorded programs
with the extension dvr-ms.
Convertion take a very long time and after having completed the convertion
it says "ffmpeg.exe doesn't function well any more and will be closed" .
Does anyone know what this means and how to solve this problem???
Hope you can help me,
kindest regards,
Petrarca

ffmpeg is a video & audio codec & conversion tool used by almost all conversion software for iPod video conversion.
I don't know why this error occured, but I'm guessing it has something to do with "Digital Media Converter 2.7"'s use of ffmpeg. Check with their website & support staff for answers. You bought it, so they should support their own product.

Problems with converted .CR2 files to .dgn on Mac Snow Leopard

Hi,
I'm trying to convert .CR2 files from my Canon 70D into .dng files so that I can use them in Adobe Bridge CS5. I have been able to convert them using Adobe DNG converter 8.2 but under the file's info I see "Dimensions 0x0". I don't understand why this is happening or how to change this so that it reflects the correct size of the image. Also, I am not able to see thumbnails of the images once they have been converted, and again can't understand why.
Can anyone suggest what I'm missing here?
I have converted photos previously to .dng and they are visible as thumbnails on my mac and the dimensions are shown in their properties so can't understand why this is happening with this new set of photos.
Thanks

Are the dimensions those of the embedded preview? Check to see what size of preview you have set in the DNG Converter options. Perhaps it is set to None.

Problem with Converter

Similar Messages

Maybe you are looking for