Problem With Converting PO Smartform into PDF

Hi All,
I am trying to email the Smartform PO. I developed the program after reading several discuusions and blogs in forum. The PO is successfully created in PDF format and stored in the local directory. When i tried to view the pdf the PO is creatd twice in the PDF. I mean the original pdf is of 3 pages with PO and terms and conditons. But in the pdf which was created it has 6 pages. I am unable to understand why it has 2 copies of same PO.
When i tried to email the pdf as attachement the email is delivered successfully. But when i tried to view the pdf its given an error that "the file is corrupted (For example the attachemnt is not coded properly)or the fle type is not supported. Even in the attachment also i have the two files one is of pdf another is also of the .pdf but the image is showing as Unknown file format.
Any suggestions to resolve these issues.
Thanks

My code is as follows:
FORM print_form .
*Calling FM to retrieve the function module associated with the Smartform
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
  EXPORTING
    FORMNAME                 = 'ZMMS_MEDRUCK_LS'
  VARIANT                  = ' '
  DIRECT_CALL              = ' '
IMPORTING
   FM_NAME                  = v_form_name
EXCEPTIONS
  NO_FORM                  = 1
  NO_FUNCTION_MODULE       = 2
  OTHERS                   = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
control_parameters-langu = sy-langu.
  control_parameters-no_dialog = 'X'.
  control_parameters-getotf    = 'X'.
Excuting the FM associated with the SmartForm by input required internal tables
CALL FUNCTION v_form_name
  EXPORTING
  ARCHIVE_INDEX              =
  ARCHIVE_INDEX_TAB          =
  ARCHIVE_PARAMETERS         =
    CONTROL_PARAMETERS         = control_parameters
  MAIL_APPL_OBJ              =
  MAIL_RECIPIENT             =
  MAIL_SENDER                =
    OUTPUT_OPTIONS             = output_options
  USER_SETTINGS              = 'X'
    IS_NAST                    = it_nast
    IS_PEKKO                   = it_pekko
IMPORTING
  DOCUMENT_OUTPUT_INFO       =
    JOB_OUTPUT_INFO            = output_data
   JOB_OUTPUT_OPTIONS         =
  TABLES
    IT_EKPO                    = it_ekpo
    IT_EKET                    = it_eket
    IS_EKKO                    = it_ekko
    IT_DRAW                    = it_draw
    IT_BUYER                   = it_buyer
EXCEPTIONS
  FORMATTING_ERROR           = 1
  INTERNAL_ERROR             = 2
  SEND_ERROR                 = 3
  USER_CANCELED              = 4
  OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
tab_otf_final[] = output_data-otfdata[].
**removing the initial and final markers from the OTF data*********
DELETE output_data-otfdata WHERE tdprintcom = '//'.
searching for the end-of-page in OTF table************
DATA : my_tabix TYPE sy-tabix.
READ TABLE tab_otf_final WITH KEY tdprintcom = 'EP'.
my_tabix = sy-tabix + 1.
appending the modified OTF table to the final OTF table****
INSERT LINES OF output_data-otfdata INTO tab_otf_final INDEX my_tabix.
  CALL FUNCTION 'CONVERT_OTF'
   EXPORTING
      FORMAT                      = 'PDF'
    MAX_LINEWIDTH               = 132
    ARCHIVE_INDEX               = ' '
    COPYNUMBER                  = 0
    ASCII_BIDI_VIS2LOG          = ' '
    PDF_DELETE_OTFTAB           = ' '
IMPORTING
      bin_filesize                = bin_filesize
    TABLES
      OTF                         = tab_otf_final
      LINES                       = lt_lines
  EXCEPTIONS
    ERR_MAX_LINEWIDTH           = 1
    ERR_FORMAT                  = 2
    ERR_CONV_NOT_POSSIBLE       = 3
    ERR_BAD_OTF                 = 4
    OTHERS                      = 5
  IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
  ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
  EXPORTING
    BIN_FILESIZE                    = bin_filesize
    FILENAME                        = 'D:TEST.PDF'
    FILETYPE                        = 'BIN'
  APPEND                          = ' '
  WRITE_FIELD_SEPARATOR           = ' '
  HEADER                          = '00'
  TRUNC_TRAILING_BLANKS           = ' '
  WRITE_LF                        = 'X'
  COL_SELECT                      = ' '
  COL_SELECT_MASK                 = ' '
  DAT_MODE                        = ' '
  CONFIRM_OVERWRITE               = ' '
  NO_AUTH_CHECK                   = ' '
  CODEPAGE                        = ' '
  IGNORE_CERR                     = ABAP_TRUE
  REPLACEMENT                     = '#'
  WRITE_BOM                       = ' '
  TRUNC_TRAILING_BLANKS_EOL       = 'X'
  WK1_N_FORMAT                    = ' '
  WK1_N_SIZE                      = ' '
  WK1_T_FORMAT                    = ' '
  WK1_T_SIZE                      = ' '
  WRITE_EOL                       = ABAP_TRUE
IMPORTING
    FILELENGTH                      = file_size
  TABLES
    DATA_TAB                        = lt_lines
  FIELDNAMES                      =
EXCEPTIONS
  FILE_WRITE_ERROR                = 1
  NO_BATCH                        = 2
  GUI_REFUSE_FILETRANSFER         = 3
  INVALID_TYPE                    = 4
  NO_AUTHORITY                    = 5
  UNKNOWN_ERROR                   = 6
  HEADER_NOT_ALLOWED              = 7
  SEPARATOR_NOT_ALLOWED           = 8
  FILESIZE_NOT_ALLOWED            = 9
  HEADER_TOO_LONG                 = 10
  DP_ERROR_CREATE                 = 11
  DP_ERROR_SEND                   = 12
  DP_ERROR_WRITE                  = 13
  UNKNOWN_DP_ERROR                = 14
  ACCESS_DENIED                   = 15
  DP_OUT_OF_MEMORY                = 16
  DISK_FULL                       = 17
  DP_TIMEOUT                      = 18
  FILE_NOT_FOUND                  = 19
  DATAPROVIDER_EXCEPTION          = 20
  CONTROL_FLUSH_ERROR             = 21
  OTHERS                          = 22
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at LT_LINES INTO wa_lines.
translate wa_LINES using '~'.
concatenate WA_BUFFER wa_LINES into WA_BUFFER.
endloop.
translate WA_BUFFER using '~'.
do.
I_RECORD = WA_BUFFER.
append I_RECORD.
shift WA_BUFFER left by 255 places.
if WA_BUFFER is initial.
exit.
endif.
enddo.
Attachment
refresh:
I_RECLIST,
I_OBJTXT,
I_OBJBIN,
I_OBJPACK.
clear WA_OBJHEAD.
I_OBJBIN[] = I_RECORD[].
APPEND I_RECORD.
Create Message Body Title and Description****************
I_OBJTXT = 'test with pdf-Attachment!'.
append I_OBJTXT.
describe table I_OBJTXT lines V_LINES_TXT.
read table I_OBJTXT index V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text*****************************
clear I_OBJPACK-TRANSF_BIN.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
I_OBJPACK-BODY_NUM = V_LINES_TXT.
I_OBJPACK-DOC_TYPE = 'PDF'.
append I_OBJPACK.
Attachment (pdf-Attachment)*************
I_OBJPACK-TRANSF_BIN = 'X'.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 1.
I_OBJPACK-BODY_START = 1.
I_OBJPACK-BODY_NUM = V_LINES_BIN.
I_OBJPACK-DOC_TYPE = 'PDF'.
I_OBJPACK-OBJ_NAME = 'smartform'.
concatenate I_OBJPACK-OBJ_NAME I_OBJPACK-DOC_TYPE into I_OBJPACK-OBJ_DESCR separated by '.'.
I_OBJPACK-OBJ_DESCR = 'test'.
I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
append I_OBJPACK.
Länge des Attachment ermitteln
clear I_RECLIST.
I_RECLIST-RECEIVER = '[email protected]'.
I_RECLIST-REC_TYPE = 'U'.
I_RECLIST-EXPRESS = 'X'.
data: TAB_LINES like SY-TABIX.
describe table I_OBJBIN lines TAB_LINES.
append I_RECLIST.
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
tables
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
exceptions
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
others = 8.
if SY-SUBRC <> 0.
write:/ 'Error When Sending the File', SY-SUBRC.
else.
write:/ 'Mail sent'.
endif.
ENDFORM.                    " print_form

Similar Messages

  • Problem in converting smart form into PDF

    HI Experts,
                      I am using a Function Module CONVERT_OTF for converting smart form into pdf file for send it to with attachment.
    But i got a error when i am using that FM.
    Runtime Errors         CONVT_NO_NUMBER
    unable to interpret *292 as a no.
    Is that because my file size too large about 13 pages of PDF?
    and when i run it for other smart forms which have 2 or 3 pages of PDF, its working perfectly.
    can anyone tell what is problem with that FM?
    Thanks
    Shakun

    Hi,
    I had the similar issue and after analysis I have that this is the issue by not passing the IMPORTING parameter of the Function Module "BIN_FILESIZE". Please try to pass some variable to this paramter and then this will be completely rectified.
    DATA ; v_filesize     TYPE i.
    *--Convert OTF data to PDF data
      CALL FUNCTION 'CONVERT_OTF'
        EXPORTING
          format                = 'PDF'
          max_linewidth         = 132
        IMPORTING
          bin_filesize          = v_filesize
        TABLES
          otf                   = it_otfdata
          lines                 = it_pdfdata
        EXCEPTIONS
          err_max_linewidth     = 1
          err_format            = 2
          err_conv_not_possible = 3
          err_bad_otf           = 4
          OTHERS                = 5.
    Please verify whether this reolves the problem for you.
    Regards,
    SRinivas

  • Problem in converting Spool Request into PDF format

    Hi,
      I am facing problem to convert spool request (which store output of sap script) in to PDF format. Actually I have converted it with function module 'CONVERT_OTFSPOOLJOB_2_PDF' and it is working properly but the problem occurs where the BOLD fonts are used. I am unable to see the Text/Address where i have used Bold Font in script (PDF FORMAT). Even though in (SPO1) spool request shows every thing perfectly (along with Bold Font). It will great if you could suggest me something.
    Thanks,
    Pradeep

    Hi Pradeep,
    Use ,
    Closing the Sapscript, we save data (OTF) in a table
    CALL FUNCTION 'CLOSE_FORM'
    TABLES
    otfdata = t_otfdata
    EXCEPTIONS
    unopened = 1
    bad_pageformat_for_print = 2
    send_error = 3
    spool_error = 4
    OTHERS = 5.
    DATA: BEGIN OF t_otfdata2 OCCURS 0.
    INCLUDE STRUCTURE solisti1.
    DATA: END OF t_otfdata2.
    Move OTF data to another table with lenght 255
    LOOP AT t_otfdata.
    CONCATENATE t_otfdata-tdprintcom t_otfdata-tdprintpar INTO t_otfdata2.
    APPEND t_otfdata2.
    ENDLOOP.
    Convert OTF format to PDF
    CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
    EXPORTING
    format_src = 'OTF'
    format_dst = 'PDF'
    devtype = 'PRINTER'
    FUNCPARA =
    len_in = len_in
    IMPORTING
    len_out = len_out
    TABLES
    content_in = t_otfdata2
    content_out = t_pdfdata
    EXCEPTIONS
    err_conv_failed = 1
    OTHERS = 2.
    Have a look at Progs. RSTXPDF4 and RSTXPDFT2 for converting the Spool to PDF.
    Regards,
    Raj
    Message was edited by: Rajasekhar Dinavahi
    Message was edited by: Rajasekhar Dinavahi

  • Problem to convert a Smartform a PDF

    Hello everybody,
    I revised the forum and found several solutions to this. But I have the following problem: when execute the functions that transforms Smartforms to PDF in R3  this generates BinField good. But when I run the model from WebDynpro and attempted access to the field BinFile (returns for model)  I get this error:
    java.lang.ArrayIndexOutOfBoundsException: -1
    It's as if the data is not in the field, as if the function dont get it. But when I run into R3 works fine.
    I'm doing next to initialize the model structure:
    Zbapi_Wty_Print_Claim_Input BapiWtyPrintClaim =
    new Zbapi_Wty_Print_Claim_Input();
    wdContext.nodeZbapi_Wty_Print_Claim_Input().bind(BapiWtyPrintClaim);
    Someone knows how to solve this?

    Hello everybody,
    I revised the forum and found several solutions to this. But I have the following problem: when execute the functions that transforms Smartforms to PDF in R3  this generates BinField good. But when I run the model from WebDynpro and attempted access to the field BinFile (returns for model)  I get this error:
    java.lang.ArrayIndexOutOfBoundsException: -1
    It's as if the data is not in the field, as if the function dont get it. But when I run into R3 works fine.
    I'm doing next to initialize the model structure:
    Zbapi_Wty_Print_Claim_Input BapiWtyPrintClaim =
    new Zbapi_Wty_Print_Claim_Input();
    wdContext.nodeZbapi_Wty_Print_Claim_Input().bind(BapiWtyPrintClaim);
    Someone knows how to solve this?

  • Problem in converting Word Document into PDF after inserting EMF file

    Hi
    I have VB 6.0 program, which automatically inserts an EMF file in to MS-Word and converts it in to Post Script file and finally to PDF.
    But the Size of the generated PDF file is too large i.e., 8MB
    If am inserting an .PNG file in MS-Word and conveting it in to Post Script and finally in to PDF, the size of PDF file is somewhere around 330KB.
    I am using Acrobat Distiller 6.0 for this conversion
    Can any one let me how I can reduce the file size of PDF, if I insert an EMF file.
    Thanks in Advance
    Vijay Kumar

    Saying a WMF file does not mean much. It could be a bitmap with 2400dpi or a vector graphic. WMF and EMF are wrappers that can include both. You may be best to open the WMF in PhotoShop or Illustrator and see if you can get a consistent size, possibly doing a copy and paste to WORD.

  • Problem with Funktion "Combine Files into PDF" on Samba Fileshares

    Hi!
    When i try to combine Files from a Sambashare witch is connected as V: (\\Server\all_x) then i can choose the Files from the location but when i klick "Combine Files" after a while the ErrorMessage "Cannot open U:\_x\test.doc" Check if you have permission.
    Why suddenly Adobe Acrobat will read the File form U: instead of V: ?
    The Path before "Underline" (Underscore) was removed : "all_x" -> "_x"
    When i renamed the Sambshare to allx without "_" everything is ok.
    I can simulate this failure on every Windows XP Workstation. (SP3+all Updates)
    Adobe Acrobat X 10.0.0
    Samba 3.0.28-0.el4.9
    Is this an issue in samba or in Adobe Acrobat?
    Update:
    This only happens when an other fileshare exists with same name at the beginning.
    example:
    U: -> \\servername\alle
    V: -> \\servername\allev or alle_v  (he underscore has no relevance....)
    when v: is \\servrname\examplepdf or any other name exept "alle" at the beginning everything is ok.
    very strange...
    greetings
    Message was edited by: hardy@austria72

    Have you checked the preferences in Acrobat to see if they have gotten changed?

  • Unable to print directly from vf03 txn after converting  smartform into PDF

    Dear All,
    I have converted ond smartform into pdf.now when i am trying to print one document using vf03 transaction whatever button i click(ex-print preview/print) it is asking to save the pdf as local file. but i want to print that document as pdf directly from vf03 without saving it into local file.
    I am giving you the code below:-
    (all modification done by me are in BOLD)
         Print of a invoice by SAPscript SMART FORMS               *
    REPORT zrlb_invoice5.
    declaration of data
    INCLUDE zrlb_invoice_data_declare5.
    *INCLUDE ZRLB_INVOICE_DATA_DECLARE.
    *INCLUDE rlb_invoice_data_declare.
    definition of forms
    INCLUDE zrlb_invoice_form015.
    *INCLUDE ZRLB_INVOICE_FORM01.
    *INCLUDE rlb_invoice_form01.
    INCLUDE zrlb_print_forms5.
    *INCLUDE ZRLB_PRINT_FORMS.
    *INCLUDE rlb_print_forms.
    START-OF-SELECTION.
          FORM ENTRY
    FORM entry USING return_code us_screen.
      DATA: lf_retcode TYPE sy-subrc.
      CLEAR retcode.
      xscreen = us_screen.
      PERFORM processing USING us_screen
                         CHANGING lf_retcode.
      IF lf_retcode NE 0.
        return_code = 1.
      ELSE.
        return_code = 0.
      ENDIF.
    ENDFORM.                    "ENTRY
          FORM PROCESSING                                               *
    FORM processing USING proc_screen
                    CHANGING cf_retcode.
      DATA: lv_medium LIKE tnapr-nacha.
      DATA: lwa_print_data_to_read TYPE lbbil_print_data_to_read.
      DATA: lwa_bil_invoice TYPE lbbil_invoice.
      DATA: lf_fm_name            TYPE rs38l_fnam.
      DATA: lwa_control_param      TYPE ssfctrlop.
      DATA: lwa_composer_param     TYPE ssfcompop.
      DATA: lwa_recipient          TYPE swotobjid.
      DATA: lwa_sender             TYPE swotobjid.
      DATA: lf_formname           TYPE tdsfname.
      DATA: lwa_addr_key           LIKE addr_key.
      DATA: ls_dlv-land           LIKE vbrk-land1.
      DATA:lv_job_output_info      TYPE ssfcrescl,
             lv_document_output_info TYPE ssfcrespd,
             lv_job_output_options   TYPE ssfcresop,
             lv_bin_filesize          TYPE i,
             gt_docs  TYPE STANDARD TABLE OF docs,
             gt_lines TYPE STANDARD TABLE OF tline,
             gt_otf TYPE TABLE OF itcoo, " OTF Structure
             lv_name                  TYPE string VALUE 'INVOICE',
             lv_guiobj                TYPE REF TO cl_gui_frontend_services,
             lv_path                  TYPE string  VALUE 'D:\',
             lv_fullpath              TYPE string VALUE 'D:\INVOICE',
             lv_filter                TYPE string,
             lv_uact                  TYPE i,
             lv_filename              TYPE string,
    ++lv_fm_name               TYPE rs38l_fnam.         +*****************************************
    SmartForm from customizing table TNAPR
      lf_formname = tnapr-sform.
      lv_medium = tnapr-nacha.
    determine print data
      PERFORM set_print_data_to_read USING    lf_formname
                                     CHANGING lwa_print_data_to_read
                                     cf_retcode.
      IF cf_retcode EQ 0.
    select print data
        PERFORM get_data USING    lwa_print_data_to_read
                         CHANGING lwa_addr_key
                                  ls_dlv-land
                                  lwa_bil_invoice
                                  cf_retcode.
      ENDIF.
      IF cf_retcode EQ 0.
        PERFORM set_print_param USING    lwa_addr_key
                                         ls_dlv-land
                                CHANGING lwa_control_param
                                         lwa_composer_param
                                         lwa_recipient
                                         lwa_sender
                                         cf_retcode.
      ENDIF.
      IF cf_retcode EQ 0.
    determine smartform function module for invoice
        CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
             EXPORTING  formname           = lf_formname
                    variant            = ' '
                    direct_call        = ' '
             IMPORTING  fm_name            = lf_fm_name
             EXCEPTIONS no_form            = 1
                        no_function_module = 2
                        OTHERS             = 3.
        IF sy-subrc NE 0.
      error handling
          cf_retcode = sy-subrc.
          PERFORM protocol_update.
        ENDIF.
      ENDIF.
      IF cf_retcode EQ 0.
        PERFORM check_repeat.
        IF lwa_composer_param-tdcopies EQ 0.
          nast_anzal = 1.
        ELSE.
          nast_anzal = lwa_composer_param-tdcopies.
        ENDIF.
        lwa_composer_param-tdcopies = 1.
        DO nast_anzal TIMES.
    In case of repetition only one time archiving
          IF sy-index GT 1 AND nast-tdarmod EQ 3.
            nast_tdarmod = nast-tdarmod.
            nast-tdarmod = 1.
            lwa_composer_param-tdarmod = 1.
          ENDIF.
          IF sy-index NE 1 AND repeat IS INITIAL.
            repeat = 'X'.
          ENDIF.
    call smartform invoice
         CALL FUNCTION lf_fm_name
              EXPORTING
                         archive_index        = toa_dara
                         archive_parameters   = arc_params
                         control_parameters   = ls_control_param
                    mail_appl_obj        =
                         mail_recipient       = ls_recipient
                         mail_sender          = ls_sender
                         output_options       = ls_composer_param
                         user_settings        = space
                         is_bil_invoice       = ls_bil_invoice
                         is_nast              = nast
                         is_repeat            = repeat
         importing  document_output_info =
                    job_output_info      =
                    job_output_options   =
              EXCEPTIONS formatting_error     = 1
                         internal_error       = 2
                         send_error           = 3
                         user_canceled        = 4
                         OTHERS               = 5.
          lwa_control_param-getotf = 'X'.
          lwa_control_param-no_dialog = 'X'.
          lwa_control_param-device = 'PRINTER'.
          CALL FUNCTION lf_fm_name
            EXPORTING
             archive_index              = toa_dara
    Begin of Changes 24/10/2007*
      ARCHIVE_INDEX_TAB          =*
            ARCHIVE_PARAMETERS         = arc_params*
             control_parameters         = lwa_control_param
      MAIL_APPL_OBJ              =*
            MAIL_RECIPIENT             = lwa_recipient*
            MAIL_SENDER                = lwa_sender*
    *End of changes 04/12/2007
             output_options             = lwa_composer_param
             user_settings              = 'X'
              is_bil_invoice             = lwa_bil_invoice
              is_nast                    = nast
              is_repeat                  = repeat
              iv_medium                  = lv_medium
    Begin OF Changes 04/12/2007*
    IMPORTING
       document_output_info       = lv_document_output_info
       job_output_info            = lv_job_output_info
       *job_output_options         = lv_job_output_options     *
    End Of Changes 04/12/2007*
    EXCEPTIONS
       formatting_error           = 1
       internal_error             = 2
       send_error                 = 3
       user_canceled              = 4
       OTHERS                     = 5.
         CALL FUNCTION lf_fm_name
           EXPORTING
            ARCHIVE_INDEX              = toa_dara
      ARCHIVE_INDEX_TAB          =
            ARCHIVE_PARAMETERS         = arc_params
            CONTROL_PARAMETERS         = lWA_control_param
      MAIL_APPL_OBJ              =
            MAIL_RECIPIENT             = lwa_recipient
            MAIL_SENDER                = lwa_sender
            OUTPUT_OPTIONS             = lwa_composer_param
            USER_SETTINGS              = space
             IS_BIL_INVOICE             = LWA_BIL_INVOICE
             IS_NAST                    = nast
             IS_REPEAT                  = repeat
             IV_MEDIUM                  = lv_medium
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
      JOB_OUTPUT_INFO            =
      JOB_OUTPUT_OPTIONS         =
    EXCEPTIONS
      FORMATTING_ERROR           = 1
      INTERNAL_ERROR             = 2
      SEND_ERROR                 = 3
      USER_CANCELED              = 4
      OTHERS                     = 5
          gt_otf[] = lv_job_output_info-otfdata[].
                  CALL FUNCTION 'CONVERT_OTF'
             EXPORTING
               FORMAT                      = 'PDF'
               MAX_LINEWIDTH               = 132
            ARCHIVE_INDEX               = ' '*
            COPYNUMBER                  = 0*
            ASCII_BIDI_VIS2LOG          = ' '*
             IMPORTING
               BIN_FILESIZE                = lv_bin_filesize
            BIN_FILE                    =*
              TABLES
                otf                         = gt_otf
                lines                       = gt_lines
          EXCEPTIONS*
            ERR_MAX_LINEWIDTH           = 1*
            ERR_FORMAT                  = 2*
            ERR_CONV_NOT_POSSIBLE       = 3*
            ERR_BAD_OTF                 = 4*
            OTHERS                      = 5*
            IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO*
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.*
            ENDIF.
    *.......................GET THE FILE NAME TO STORE.........
            CONCATENATE 'smrt' '.pdf' INTO lv_name.
          CREATE OBJECT lv_guiobj.
          CALL METHOD lv_guiobj->file_save_dialog
            EXPORTING
              default_extension = 'pdf'
              default_file_name = lv_name
              file_filter       = lv_filter
            CHANGING
              filename          = lv_name
              path              = lv_path
              fullpath          = lv_fullpath.
       user_action       = lv_uact.*
          IF lv_uact = lv_guiobj->action_cancel.
            EXIT.
          ENDIF.*
         MOVE lv_fullpath TO lv_filename.
           CALL METHOD cl_gui_frontend_services=>gui_download
             EXPORTING
              BIN_FILESIZE              =  lv_bin_filesize
               filename                  =  lv_fullpath
               FILETYPE                  = 'BIN'
       APPEND                    = SPACE
       WRITE_FIELD_SEPARATOR     = SPACE
       HEADER                    = '00'
       TRUNC_TRAILING_BLANKS     = SPACE
       WRITE_LF                  = 'X'
       COL_SELECT                = SPACE
       COL_SELECT_MASK           = SPACE
       DAT_MODE                  = SPACE
       CONFIRM_OVERWRITE         = SPACE
       NO_AUTH_CHECK             = SPACE
       CODEPAGE                  = SPACE
       IGNORE_CERR               = ABAP_TRUE
       REPLACEMENT               = '#'
       WRITE_BOM                 = SPACE
       TRUNC_TRAILING_BLANKS_EOL = 'X'
    IMPORTING
       FILELENGTH                =
             changing
               data_tab                  =   gt_lines.
    EXCEPTIONS
       FILE_WRITE_ERROR          = 1
       NO_BATCH                  = 2
       GUI_REFUSE_FILETRANSFER   = 3
       INVALID_TYPE              = 4
       NO_AUTHORITY              = 5
       UNKNOWN_ERROR             = 6
       HEADER_NOT_ALLOWED        = 7
       SEPARATOR_NOT_ALLOWED     = 8
       FILESIZE_NOT_ALLOWED      = 9
       HEADER_TOO_LONG           = 10
       DP_ERROR_CREATE           = 11
       DP_ERROR_SEND             = 12
       DP_ERROR_WRITE            = 13
       UNKNOWN_DP_ERROR          = 14
       ACCESS_DENIED             = 15
       DP_OUT_OF_MEMORY          = 16
       DISK_FULL                 = 17
       DP_TIMEOUT                = 18
       FILE_NOT_FOUND            = 19
       DATAPROVIDER_EXCEPTION    = 20
       CONTROL_FLUSH_ERROR       = 21
       NOT_SUPPORTED_BY_GUI      = 22
       ERROR_NO_GUI              = 23
       others                    = 24
            IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO*
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.*
            ENDIF.
          Else.
           IF sy-subrc NE 0.*
      error handling
              cf_retcode = sy-subrc.
              PERFORM protocol_update.
    get SmartForm protocoll and store it in the NAST protocoll
              PERFORM add_smfrm_prot.
            ENDIF.
          ENDDO.
          lwa_composer_param-tdcopies = nast_anzal.
          IF NOT nast_tdarmod IS INITIAL.
            nast-tdarmod = nast_tdarmod.
            CLEAR nast_tdarmod.
          ENDIF.
        ENDIF.
    get SmartForm protocoll and store it in the NAST protocoll
    PERFORM ADD_SMFRM_PROT.
      ENDFORM.                    "PROCESSING
    kindly give me a sloution.

    Hi,
    Check for the print mode in the print options and set it as 3- print and archive .
    Regards,
    Ram

  • Hi my question abt 2 convert a list into pdf format

    hi
    experts
    i had problem to convert displayed list into pdf format showing an error cannot open the file file format not supported, but i am have downloaded the file in .pdf format
    please help me
    thank you all

    Hi,
    check out this program. this might help:
    report zabap_pdf.
    tables:
      tsp01.
    data:
      mstr_print_parms like pri_params,
      mc_valid(1)      type c,
      mi_bytecount     type i,
      mi_length        type i,
      mi_rqident       like tsp01-rqident.
    *-- INTERNAL TABLES
    data:
      mtab_pdf    like tline occurs 0 with header line,
      mc_filename like rlgrap-filename.
    *-- SELECTION SCREEN
    parameters:
      p_repid like sy-repid, " Report to execute
      p_linsz like sy-linsz default 132, " Line size
      p_paart like sy-paart default 'X_65_132'.  " Paper Format
    start-of-selection.
    concatenate 'c:\'
                p_repid
                '.pdf'
      into mc_filename.
    *-- Setup the Print Parmaters
      call function 'GET_PRINT_PARAMETERS'
       exporting
         authority= space
         copies   = '1'
         cover_page                   = space
         data_set = space
         department                   = space
         destination                  = space
         expiration                   = '1'
         immediately                  = space
         in_archive_parameters        = space
         in_parameters                = space
         layout   = space
         mode     = space
         new_list_id                  = 'X'
         no_dialog= 'X'
         user     = sy-uname
       importing
         out_parameters               = mstr_print_parms
         valid    = mc_valid
       exceptions
         archive_info_not_found       = 1
         invalid_print_params         = 2
         invalid_archive_params       = 3
         others   = 4.
    *-- Make sure that a printer destination has been set up
    *-- If this is not done the PDF function module ABENDS
      if mstr_print_parms-pdest = space.
        mstr_print_parms-pdest = 'LOCL'.
      endif.
    *-- Explicitly set line width, and output format so that
    *-- the PDF conversion comes out OK
      mstr_print_parms-linsz = p_linsz.
      mstr_print_parms-paart = p_paart.
      submit (p_repid) to sap-spool without spool dynpro
                       spool parameters mstr_print_parms
                       via selection-screen
                       and return.
    *-- Find out what the spool number is that was just created
      perform get_spool_number using sy-repid
                 sy-uname
        changing mi_rqident.
    *-- Convert Spool to PDF
      call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
        exporting
          src_spoolid= mi_rqident
          no_dialog  = space
          dst_device = mstr_print_parms-pdest
        importing
          pdf_bytecount                  = mi_bytecount
        tables
          pdf        = mtab_pdf
        exceptions
          err_no_abap_spooljob           = 1
          err_no_spooljob                = 2
          err_no_permission              = 3
          err_conv_not_possible          = 4
          err_bad_destdevice             = 5
          user_cancelled                 = 6
          err_spoolerror                 = 7
          err_temseerror                 = 8
          err_btcjob_open_failed         = 9
          err_btcjob_submit_failed       = 10
          err_btcjob_close_failed        = 11
          others     = 12.
    call function 'DOWNLOAD'
         exporting
              bin_filesize            = mi_bytecount
              filename                = mc_filename
              filetype                = 'BIN'
         importing
              act_filename            = mc_filename
         tables
              data_tab                = mtab_pdf.
          FORM get_spool_number *
          Get the most recent spool created by user/report              *
    -->  F_REPID               *
    -->  F_UNAME               *
    -->  F_RQIDENT             *
    form get_spool_number using f_repid
         f_uname
                    changing f_rqident.
      data:
        lc_rq2name like tsp01-rq2name.
      concatenate f_repid+0(8)
                  f_uname+0(3)
        into lc_rq2name separated by '_'.
      select * from tsp01 where  rq2name = lc_rq2name
      order by rqcretime descending.
        f_rqident = tsp01-rqident.
        exit.
      endselect.
      if sy-subrc ne 0.
        clear f_rqident.
      endif.
    endform." get_spool_number

  • Content Not Coming Properly after converting a Smartform to PDF.

    I am converting a smartform into PDF format using CONVERT_OTF .
    This smart form will be triggered from the portal at the occurance of an event .After Conversion some texts are properly outputted in the PDF but some texts which are in  arabic are not coming properly ( shows some junk data in a language other than Arabic).
    Can any give a Solution ??
    Thanks
    Chaitanya Sharma
    Edited by: chaitanya  sharma on Jan 28, 2009 2:15 PM

    hi
    try using this fm CONVERT_OTF_2_PDF
    hope this helps
    regards
    Aakash Banga

  • CONVERTING SMARTFORM INTO PDF AND PRINTING DIRECTLY

    Hai guys,
       I got a problem.
    First the Smartform I created doesnt show all TABLE LINES(the rows coloumns)...
    so I have converted the SMART FORM to ADOBE FORM PROGRAMITICALY ...
    now in order to PRINT ..
    one has to first SAVE the FORM(adobe form) onto desktop(or whereever) and give it to PRINT...
    unfortunately my CLIENT doeasnt like the EXTRA STEP..
    so i best i can SAVE the file to a hardcoded location and
    OPEN it ..
    But then CAN I
    a)PRINT DIRECTLY without SAVING??
    b)ISSUE PRINT PROGRAMITICALY
    c)I learnt that a SMARTFORM can be GENERATED INTO PDF only at RUNNTIME(from SMARTFORMS>UTILITIES etc)..i briefly tried that..can I use that to GET THE PDF to PRINT when one gives PRINT from SPOOL REQUEST(sp01)
    hoping to give some quick points

    Hi,
    http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
    or
    *& Report  ZSPOOLTOPDF                                                 *
    *& Converts spool request into PDF document and emails it to           *
    *& recipicant.                                                         *
    *& Execution                                                           *
    *& This program must be run as a background job in-order for the write *
    *& commands to create a Spool request rather than be displayed on      *
    *& screen                                                              *
    REPORT  zspooltopdf.
    PARAMETER: p_email1 LIKE somlreci1-receiver
                                        DEFAULT '[email protected]',
               p_sender LIKE somlreci1-receiver
                                        DEFAULT '[email protected]',
               p_delspl  AS CHECKBOX.
    *DATA DECLARATION
    DATA: gd_recsize TYPE i.
    Spool IDs
    TYPES: BEGIN OF t_tbtcp.
            INCLUDE STRUCTURE tbtcp.
    TYPES: END OF t_tbtcp.
    DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
          wa_tbtcp TYPE t_tbtcp.
    Job Runtime Parameters
    DATA: gd_eventid LIKE tbtcm-eventid,
          gd_eventparm LIKE tbtcm-eventparm,
          gd_external_program_active LIKE tbtcm-xpgactive,
          gd_jobcount LIKE tbtcm-jobcount,
          gd_jobname LIKE tbtcm-jobname,
          gd_stepcount LIKE tbtcm-stepcount,
          gd_error    TYPE sy-subrc,
          gd_reciever TYPE sy-subrc.
    DATA:  w_recsize TYPE i.
    DATA: gd_subject   LIKE sodocchgi1-obj_descr,
          it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          gd_sender_type     LIKE soextreci1-adr_typ,
          gd_attachment_desc TYPE so_obj_nam,
          gd_attachment_name TYPE so_obj_des.
    Spool to PDF conversions
    DATA: gd_spool_nr LIKE tsp01-rqident,
          gd_destination LIKE rlgrap-filename,
          gd_bytecount LIKE tst01-dsize,
          gd_buffer TYPE string.
    Binary store for PDF
    DATA: BEGIN OF it_pdf_output OCCURS 0.
            INCLUDE STRUCTURE tline.
    DATA: END OF it_pdf_output.
    CONSTANTS: c_dev LIKE  sy-sysid VALUE 'DEV',
               c_no(1)     TYPE c   VALUE ' ',
               c_device(4) TYPE c   VALUE 'LOCL'.
    *START-OF-SELECTION.
    START-OF-SELECTION.
    Write statement to represent report output. Spool request is created
    if write statement is executed in background. This could also be an
    ALV grid which would be converted to PDF without any extra effort
      WRITE 'Hello World'.
      new-page.
      commit work.
      new-page print off.
      IF sy-batch EQ 'X'.
        PERFORM get_job_details.
        PERFORM obtain_spool_id.
    Alternative way could be to submit another program and store spool
    id into memory, will be stored in sy-spono.
    *submit ZSPOOLTOPDF2
           to sap-spool
           spool parameters   %_print
           archive parameters %_print
           without spool dynpro
           and return.
    Get spool id from program called above
    IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
        PERFORM convert_spool_to_pdf.
        PERFORM process_email.
        if p_delspl EQ 'X'.
          PERFORM delete_spool.
        endif.
        IF sy-sysid = c_dev.
          wait up to 5 seconds.
          SUBMIT rsconn01 WITH mode   = 'INT'
                          WITH output = 'X'
                          AND RETURN.
        ENDIF.
      ELSE.
        SKIP.
        WRITE:/ 'Program must be executed in background in-order for spool',
                'request to be created.'.
      ENDIF.
          FORM obtain_spool_id                                          *
    FORM obtain_spool_id.
      CHECK NOT ( gd_jobname IS INITIAL ).
      CHECK NOT ( gd_jobcount IS INITIAL ).
      SELECT * FROM  tbtcp
                     INTO TABLE it_tbtcp
                     WHERE      jobname     = gd_jobname
                     AND        jobcount    = gd_jobcount
                     AND        stepcount   = gd_stepcount
                     AND        listident   <> '0000000000'
                     ORDER BY   jobname
                                jobcount
                                stepcount.
      READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
      IF sy-subrc = 0.
        message s004(zdd) with gd_spool_nr.
        gd_spool_nr = wa_tbtcp-listident.
        MESSAGE s004(zdd) WITH gd_spool_nr.
      ELSE.
        MESSAGE s005(zdd).
      ENDIF.
    ENDFORM.
          FORM get_job_details                                          *
    FORM get_job_details.
    Get current job details
      CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
           IMPORTING
                eventid                 = gd_eventid
                eventparm               = gd_eventparm
                external_program_active = gd_external_program_active
                jobcount                = gd_jobcount
                jobname                 = gd_jobname
                stepcount               = gd_stepcount
           EXCEPTIONS
                no_runtime_info         = 1
                OTHERS                  = 2.
    ENDFORM.
          FORM convert_spool_to_pdf                                     *
    FORM convert_spool_to_pdf.
      CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
           EXPORTING
                src_spoolid              = gd_spool_nr
                no_dialog                = c_no
                dst_device               = c_device
           IMPORTING
                pdf_bytecount            = gd_bytecount
           TABLES
                pdf                      = it_pdf_output
           EXCEPTIONS
                err_no_abap_spooljob     = 1
                err_no_spooljob          = 2
                err_no_permission        = 3
                err_conv_not_possible    = 4
                err_bad_destdevice       = 5
                user_cancelled           = 6
                err_spoolerror           = 7
                err_temseerror           = 8
                err_btcjob_open_failed   = 9
                err_btcjob_submit_failed = 10
                err_btcjob_close_failed  = 11
                OTHERS                   = 12.
      CHECK sy-subrc = 0.
    Transfer the 132-long strings to 255-long strings
      LOOP AT it_pdf_output.
        TRANSLATE it_pdf_output USING ' ~'.
        CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
      ENDLOOP.
      TRANSLATE gd_buffer USING '~ '.
      DO.
        it_mess_att = gd_buffer.
        APPEND it_mess_att.
        SHIFT gd_buffer LEFT BY 255 PLACES.
        IF gd_buffer IS INITIAL.
          EXIT.
        ENDIF.
      ENDDO.
    ENDFORM.
          FORM process_email                                            *
    FORM process_email.
      DESCRIBE TABLE it_mess_att LINES gd_recsize.
      CHECK gd_recsize > 0.
      PERFORM send_email USING p_email1.
    perform send_email using p_email2.
    ENDFORM.
          FORM send_email                                               *
    -->  p_email                                                       *
    FORM send_email USING p_email.
      CHECK NOT ( p_email IS INITIAL ).
      REFRESH it_mess_bod.
    Default subject matter
      gd_subject         = 'Subject'.
      gd_attachment_desc = 'Attachname'.
    CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
      it_mess_bod        = 'Message Body text, line 1'.
      APPEND it_mess_bod.
      it_mess_bod        = 'Message Body text, line 2...'.
      APPEND it_mess_bod.
    If no sender specified - default blank
      IF p_sender EQ space.
        gd_sender_type  = space.
      ELSE.
        gd_sender_type  = 'INT'.
      ENDIF.
    Send file by email as .xls speadsheet
      PERFORM send_file_as_email_attachment
                                   tables it_mess_bod
                                          it_mess_att
                                    using p_email
                                          'Example .xls documnet attachment'
                                          'PDF'
                                          gd_attachment_name
                                          gd_attachment_desc
                                          p_sender
                                          gd_sender_type
                                 changing gd_error
                                          gd_reciever.
    ENDFORM.
          FORM delete_spool                                             *
    FORM delete_spool.
      DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
      ld_spool_nr = gd_spool_nr.
      CHECK p_delspl <> c_no.
      CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
           EXPORTING
                spoolid = ld_spool_nr.
    ENDFORM.
    *&      Form  SEND_FILE_AS_EMAIL_ATTACHMENT
          Send email
    FORM send_file_as_email_attachment tables it_message
                                              it_attach
                                        using p_email
                                              p_mtitle
                                              p_format
                                              p_filename
                                              p_attdescription
                                              p_sender_address
                                              p_sender_addres_type
                                     changing p_error
                                              p_reciever.
      DATA: ld_error    TYPE sy-subrc,
            ld_reciever TYPE sy-subrc,
            ld_mtitle LIKE sodocchgi1-obj_descr,
            ld_email LIKE  somlreci1-receiver,
            ld_format TYPE  so_obj_tp ,
            ld_attdescription TYPE  so_obj_nam ,
            ld_attfilename TYPE  so_obj_des ,
            ld_sender_address LIKE  soextreci1-receiver,
            ld_sender_address_type LIKE  soextreci1-adr_typ,
            ld_receiver LIKE  sy-subrc.
    data:   t_packing_list like sopcklsti1 occurs 0 with header line,
            t_contents like solisti1 occurs 0 with header line,
            t_receivers like somlreci1 occurs 0 with header line,
            t_attachment like solisti1 occurs 0 with header line,
            t_object_header like solisti1 occurs 0 with header line,
            w_cnt type i,
            w_sent_all(1) type c,
            w_doc_data like sodocchgi1.
      ld_email   = p_email.
      ld_mtitle = p_mtitle.
      ld_format              = p_format.
      ld_attdescription      = p_attdescription.
      ld_attfilename         = p_filename.
      ld_sender_address      = p_sender_address.
      ld_sender_address_type = p_sender_addres_type.
    Fill the document data.
      w_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
      w_doc_data-obj_langu = sy-langu.
      w_doc_data-obj_name  = 'SAPRPT'.
      w_doc_data-obj_descr = ld_mtitle .
      w_doc_data-sensitivty = 'F'.
    Fill the document data and get size of attachment
      CLEAR w_doc_data.
      READ TABLE it_attach INDEX w_cnt.
      w_doc_data-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
      w_doc_data-obj_langu  = sy-langu.
      w_doc_data-obj_name   = 'SAPRPT'.
      w_doc_data-obj_descr  = ld_mtitle.
      w_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
      t_attachment[] = it_attach[].
    Describe the body of the message
      CLEAR t_packing_list.
      REFRESH t_packing_list.
      t_packing_list-transf_bin = space.
      t_packing_list-head_start = 1.
      t_packing_list-head_num = 0.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE it_message LINES t_packing_list-body_num.
      t_packing_list-doc_type = 'RAW'.
      APPEND t_packing_list.
    Create attachment notification
      t_packing_list-transf_bin = 'X'.
      t_packing_list-head_start = 1.
      t_packing_list-head_num   = 1.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
      t_packing_list-doc_type   =  ld_format.
      t_packing_list-obj_descr  =  ld_attdescription.
      t_packing_list-obj_name   =  ld_attfilename.
      t_packing_list-doc_size   =  t_packing_list-body_num * 255.
      APPEND t_packing_list.
    Add the recipients email address
      CLEAR t_receivers.
      REFRESH t_receivers.
      t_receivers-receiver = ld_email.
      t_receivers-rec_type = 'U'.
      t_receivers-com_type = 'INT'.
      t_receivers-notif_del = 'X'.
      t_receivers-notif_ndel = 'X'.
      APPEND t_receivers.
      CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
           EXPORTING
                document_data              = w_doc_data
                put_in_outbox              = 'X'
                sender_address             = ld_sender_address
                sender_address_type        = ld_sender_address_type
                commit_work                = 'X'
           IMPORTING
                sent_to_all                = w_sent_all
           TABLES
                packing_list               = t_packing_list
                contents_bin               = t_attachment
                contents_txt               = it_message
                receivers                  = t_receivers
           EXCEPTIONS
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                OTHERS                     = 8.
    Populate zerror return code
      ld_error = sy-subrc.
    Populate zreceiver return code
      LOOP AT t_receivers.
        ld_receiver = t_receivers-retrn_code.
      ENDLOOP.
    ENDFORM.
    Regards,
    Kumar

  • Convert SmartForm into PDF(PDF should be password protected)

    Hi Friends,
                  This is my requirement.
    Need to convert SmartForm into PDF and this PDF should be send as an email with attachment and PDF should be password protected.
    Can anyone plz help me???

    Dear Jena,
                   This is my code.
       CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          formname = 'ZBIN_SMARTFORM'
        IMPORTING
          fm_name  = v_fm.
    *&   ASSIGNING VALUES TO FORM CONTROL STRUCTURE AND FORM COMPOSER
      gs_ctrlop-getotf = 'X'.
      gs_ctrlop-device = 'PRINTER'.
      gs_ctrlop-preview = ' '.
      gs_ctrlop-no_dialog = 'X'.
      gs_outopt-tddest = 'LOCL'.
    *                   GETTING THE OTF DATA
      CALL FUNCTION v_fm
        EXPORTING
    *     ARCHIVE_INDEX        =
    *     ARCHIVE_INDEX_TAB    =
    *     ARCHIVE_PARAMETERS   =
          control_parameters   = gs_ctrlop
    *     MAIL_APPL_OBJ        =
    *     MAIL_RECIPIENT       =
    *     MAIL_SENDER          =
          output_options       = gs_outopt
          user_settings        = ' '
          wa_lfa1              = wa_lfa1
          wa_t001              = wa_t001
          wa_ekko              = wa_ekko
          wa_adrc              = wa_adrc
        IMPORTING
    *     DOCUMENT_OUTPUT_INFO =
          job_output_info      = gs_otfdata
    *     JOB_OUTPUT_OPTIONS   =
        TABLES
          it_ekpo              = it_ekpo
        EXCEPTIONS
          formatting_error     = 1
          internal_error       = 2
          send_error           = 3
          user_canceled        = 4
          OTHERS               = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    *        ASSIGNING THE OTFDATA TO OTF STRUCTURE TABLE
      CLEAR gt_otf.
      gt_otf[] = gs_otfdata-otfdata[].
    *                   CONVERTING THE OTFDATA
      CLEAR gt_lines.
      CALL FUNCTION 'CONVERT_OTF'
        EXPORTING
          format                = 'PDF'
          max_linewidth         = 132
    *     ARCHIVE_INDEX         = ' '
    *     COPYNUMBER            = 0
    *     ASCII_BIDI_VIS2LOG    = ' '
    *     PDF_DELETE_OTFTAB     = ' '
    *     PDF_USERNAME          = ' '
    *     PDF_PREVIEW           = ' '
    *     USE_CASCADING         = ' '
        IMPORTING
          bin_filesize          = bin_file
    *     bin_file              = bin_file
        TABLES
          otf                   = gt_otf
          lines                 = gt_lines
        EXCEPTIONS
          err_max_linewidth     = 1
          err_format            = 2
          err_conv_not_possible = 3
          err_bad_otf           = 4
          OTHERS                = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      DATA l_file TYPE string  .
      CONCATENATE  'D:\usr\sap\CID\DVEBMGS00\work' '.PDF' INTO l_file.
      OPEN DATASET l_file FOR OUTPUT IN BINARY MODE  .
      IF  sy-subrc = 0 .
        LOOP AT gt_lines INTO gs_lines .
          TRANSFER gs_lines TO l_file .
        ENDLOOP.
        CLOSE DATASET l_file .
      ELSE.
        WRITE : / 'operating system could not open file' .
      ENDIF.
    *      ASSIGNING THE DESCRIPTION OF THE OBJECT SENT IN MAIL
      CLEAR gs_docdata.
      gs_docdata-obj_name = gc_tst.
      gs_docdata-obj_descr = gc_testing.
      gs_docdata-obj_langu = sy-langu.
    *        ASSIGNING THE EMAIL-ID TO STRUCTURE OF API RECIPIENT LIST TABLE
      CLEAR : gt_reclist,gs_reclist.
    ***IF INTERNAL MAIL-ID
    *  gs_reclist-receiver = sy-uname.
    *  gs_reclist-rec_type = 'B'.
    ***IF EXTERNAL MAIL-ID
      gs_reclist-receiver = '[email protected]'.
      gs_reclist-rec_type = 'U'.
      APPEND gs_reclist TO gt_reclist.
    *     PASSING THE SAP SCRIPT LINES TO SAP OFFICE
      CLEAR : gs_objbin,gs_lines.
      LOOP AT gt_lines INTO gs_lines.
        gv_pos = 255 - gv_len.
        IF gv_pos > 134.
          gv_pos = 134.
        ENDIF.
        gs_objbin+gv_len = gs_lines(gv_pos).
        gv_len = gv_len + gv_pos.
        IF gv_len = 255.
          APPEND gs_objbin TO gt_objbin.
          CLEAR : gs_objbin,gv_len.
          IF gv_pos < 134.
            gs_objbin = gs_lines+gv_pos.
            gv_len = 134 - gv_pos.
          ENDIF.
        ENDIF.
      ENDLOOP.
      IF gv_len > 0.
        APPEND gs_objbin TO gt_objbin.
      ENDIF.
    *           FILLING THE DETAILS IN SAP OFFICE
      DESCRIBE TABLE gt_objbin LINES gv_tab_lines.
      CLEAR gs_objbin.
      READ TABLE gt_objbin INTO gs_objbin INDEX gv_tab_lines.
      IF sy-subrc = 0.
        gs_objpack-doc_size = ( gv_tab_lines - 1 ) * 255 + strlen( gs_objbin ).
        gs_objpack-transf_bin = 'X'.
        gs_objpack-head_start = 1.
        gs_objpack-head_num = 0.
        gs_objpack-body_start = 1.
        gs_objpack-body_num = gv_tab_lines.
        gs_objpack-doc_type = 'PDF'.
        gs_objpack-obj_name = 'ATTACHMENT'.
        gs_objpack-obj_descr = 'TEST'.
        APPEND gs_objpack TO gt_objpack.
      ENDIF.
      DATA: BEGIN OF command_list OCCURS 0.
              INCLUDE STRUCTURE sxpgcolist.
      DATA: END OF command_list .
      DATA: BEGIN OF exec_protocol OCCURS 0.
              INCLUDE STRUCTURE btcxpm.
      DATA: END OF exec_protocol.
      DATA: status LIKE btcxp3-exitstat,
       commandname LIKE sxpgcolist-name VALUE 'ZB_TEST',
        sel_no LIKE sy-tabix.
    * GET LIST OF EXTERNAL COMMANDS
      CALL FUNCTION 'SXPG_COMMAND_LIST_GET'
        EXPORTING
          commandname     = commandname
          operatingsystem = sy-opsys
        TABLES
          command_list    = command_list
        EXCEPTIONS
          OTHERS          = 1.
      CALL FUNCTION 'SXPG_COMMAND_CHECK'
        EXPORTING
          commandname                = command_list-name
          operatingsystem            = sy-opsys
        EXCEPTIONS
          no_permission              = 1
          command_not_found          = 2
          parameters_too_long        = 3
          security_risk              = 4
          wrong_check_call_interface = 5
          x_error                    = 6
          too_many_parameters        = 7
          parameter_expected         = 8
          illegal_command            = 9
          communication_failure      = 10
          system_failure             = 11
          OTHERS                     = 12.
      CLEAR command_list.
      REFRESH command_list.
      DATA: v_dir_input      TYPE sxpgcolist-parameters.
      DATA: v_dir_input1      TYPE sxpgcolist-parameters.
      command_list-name = 'ZB_TEST'.
      command_list-opsystem = 'Windows NT'.
      DATA : doc  TYPE string.
      DATA : pass TYPE string ,
            name(40).
      doc = 'invoice'.
      pass = '123456'.
      CONCATENATE   'cnd/c d:\pdf\encryptpdf.exe' doc'.PDF' INTO name.
      CONCATENATE 'cmd /c d:\pdf\encryptpdf.exe' '-i'  name  '-o ' name  '-u'  pass INTO v_dir_input SEPARATED BY space .
      READ TABLE command_list INDEX sel_no.
      CONCATENATE command_list-opcommand v_dir_input INTO command_list-opcommand SEPARATED BY space.
    * CHECK AUTHORIZATION
      command_list-addpar = 'X'.
      APPEND command_list.
      CONSTANTS: c_extcom    TYPE sxpgcolist-name VALUE 'ZB_TEST',
       c_oper      TYPE syopsys VALUE 'Windows NT'.
      DATA: t_result         TYPE STANDARD TABLE OF btcxpm.
      v_dir_input  =  command_list-opcommand.
      CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
        EXPORTING
          commandname                   = c_extcom
          additional_parameters         = v_dir_input
          operatingsystem               = c_oper
        TABLES
          exec_protocol                 = t_result
        EXCEPTIONS
          no_permission                 = 1
          command_not_found             = 2
          parameters_too_long           = 3
          security_risk                 = 4
          wrong_check_call_interface    = 5
          program_start_error           = 6
          program_termination_error     = 7
          x_error                       = 8
          parameter_expected            = 9
          too_many_parameters           = 10
          illegal_command               = 11
          wrong_asynchronous_parameters = 12
          cant_enq_tbtco_entry          = 13
          jobcount_generation_error     = 14
          OTHERS                        = 15.
      OPEN DATASET l_file FOR INPUT IN BINARY MODE.
      IF sy-subrc = 0.
        READ DATASET l_file INTO itab_attach.
        CLOSE DATASET l_file.
      ENDIF.
      CALL METHOD cl_bcs_convert=>xstring_to_solix
        EXPORTING
          iv_xstring = itab_attach
        RECEIVING
          et_solix   = t_attachment.
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
        EXPORTING
          document_data                    = gs_docdata
       PUT_IN_OUTBOX                    = 'X'
       COMMIT_WORK                      = 'X'
    * IMPORTING
    *   SENT_TO_ALL                      =
    *   NEW_OBJECT_ID                    =
        TABLES
          packing_list                     = gt_objpack
    *   OBJECT_HEADER                    =
       CONTENTS_BIN                     = gt_objbin
    *   CONTENTS_TXT                     =
       CONTENTS_HEX                     = t_attachment
    *   OBJECT_PARA                      =
    *   OBJECT_PARB                      =
          receivers                        = gt_reclist
    * EXCEPTIONS
    *   TOO_MANY_RECEIVERS               = 1
    *   DOCUMENT_NOT_SENT                = 2
    *   DOCUMENT_TYPE_NOT_EXIST          = 3
    *   OPERATION_NO_AUTHORIZATION       = 4
    *   PARAMETER_ERROR                  = 5
    *   X_ERROR                          = 6
    *   ENQUEUE_ERROR                    = 7
    *   OTHERS                           = 8
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
           WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ELSE.
        WRITE 'SENT SUCCESSFULLY'.
      ENDIF.
      SUBMIT rsconn01 WITH mode EQ 'INT' AND RETURN.
    The mail is sent to inbox successfully,but when am opening the attachment am getting the below error as,
    ---> There was an error while opening this file.The file is damaged and couldnt be repaired.

  • Want to create a function module  which will convert smartform into PDF .

    Hi All ,
    Requirement : I want to create a function module/report  which will convert smartform into PDF .
    Thanks in advance

    Hi All ,
    zsuresh_test : for converting smartform into pdf.
    when I am excuting this report(zsuresh_test) and by passing the smartform name FOPCR_STANDARD_F1
    I am getting error :
    Incorrect parameter with CALL FUNCTION
    Can you  please help me out..
    REPORT zsuresh_test.
    Variable declarations
    DATA:
    w_form_name TYPE tdsfname VALUE 'FOPCR_STANDARD_F1',
    w_fmodule TYPE rs38l_fnam,
    w_cparam TYPE ssfctrlop,
    w_outoptions TYPE ssfcompop,
    W_bin_filesize TYPE i, " Binary File Size
    w_FILE_NAME type string,
    w_File_path type string,
    w_FULL_PATH type string.
    Internal tables declaration
    Internal table to hold the OTF data
    DATA:
    t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
    Internal table to hold OTF data recd from the SMARTFORM
    t_otf_from_fm TYPE ssfcrescl,
    Internal table to hold the data from the FM CONVERT_OTF
    T_pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE.
    This function module call is used to retrieve the name of the Function
    module generated when the SMARTFORM is activated
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
    formname = w_form_name
    VARIANT = ' '
    DIRECT_CALL = ' '
    IMPORTING
    fm_name = w_fmodule
    EXCEPTIONS
    no_form = 1
    no_function_module = 2
    OTHERS = 3
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    Calling the SMARTFORM using the function module retrieved above
    GET_OTF parameter in the CONTROL_PARAMETERS is set to get the OTF
    format of the output
    w_cparam-no_dialog = 'X'.
    w_cparam-preview = space. " Suppressing the dialog box
    " for print preview
    w_cparam-getotf = 'X'.
    Printer name to be used is provided in the export parameter
    OUTPUT_OPTIONS
    w_outoptions-tddest = 'LP01'.
    CALL FUNCTION w_fmodule
    EXPORTING
    ARCHIVE_INDEX =
    ARCHIVE_INDEX_TAB =
    ARCHIVE_PARAMETERS =
    control_parameters = w_cparam
    MAIL_APPL_OBJ =
    MAIL_RECIPIENT =
    MAIL_SENDER =
    output_options = w_outoptions
    USER_SETTINGS = 'X'
    IMPORTING
    DOCUMENT_OUTPUT_INFO =
    job_output_info = t_otf_from_fm
    JOB_OUTPUT_OPTIONS =
    EXCEPTIONS
    formatting_error = 1
    internal_error = 2
    send_error = 3
    user_canceled = 4
    OTHERS = 5
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    t_otf[] = t_otf_from_fm-otfdata[].
    Function Module CONVERT_OTF is used to convert the OTF format to PDF
    CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
    FORMAT = 'PDF'
    MAX_LINEWIDTH = 132
    ARCHIVE_INDEX = ' '
    COPYNUMBER = 0
    ASCII_BIDI_VIS2LOG = ' '
    PDF_DELETE_OTFTAB = ' '
    IMPORTING
    BIN_FILESIZE = W_bin_filesize
    BIN_FILE =
    TABLES
    otf = T_OTF
    lines = T_pdf_tab
    EXCEPTIONS
    ERR_MAX_LINEWIDTH = 1
    ERR_FORMAT = 2
    ERR_CONV_NOT_POSSIBLE = 3
    ERR_BAD_OTF = 4
    OTHERS = 5
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    To display File SAVE dialog window
    CALL METHOD cl_gui_frontend_services=>file_save_dialog
    EXPORTING
    WINDOW_TITLE =
    DEFAULT_EXTENSION =
    DEFAULT_FILE_NAME =
    FILE_FILTER =
    INITIAL_DIRECTORY =
    WITH_ENCODING =
    PROMPT_ON_OVERWRITE = 'X'
    CHANGING
    filename = w_FILE_NAME
    path = w_FILE_PATH
    fullpath = w_FULL_PATH
    USER_ACTION =
    FILE_ENCODING =
    EXCEPTIONS
    CNTL_ERROR = 1
    ERROR_NO_GUI = 2
    NOT_SUPPORTED_BY_GUI = 3
    others = 4
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Use the FM GUI_DOWNLOAD to download the generated PDF file onto the
    presentation server
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    BIN_FILESIZE = W_bin_filesize
    filename = w_FULL_PATH
    FILETYPE = 'BIN'
    APPEND = ' '
    WRITE_FIELD_SEPARATOR = ' '
    HEADER = '00'
    TRUNC_TRAILING_BLANKS = ' '
    WRITE_LF = 'X'
    COL_SELECT = ' '
    COL_SELECT_MASK = ' '
    DAT_MODE = ' '
    CONFIRM_OVERWRITE = ' '
    NO_AUTH_CHECK = ' '
    CODEPAGE = ' '
    IGNORE_CERR = ABAP_TRUE
    REPLACEMENT = '#'
    WRITE_BOM = ' '
    TRUNC_TRAILING_BLANKS_EOL = 'X'
    WK1_N_FORMAT = ' '
    WK1_N_SIZE = ' '
    WK1_T_FORMAT = ' '
    WK1_T_SIZE = ' '
    IMPORTING
    FILELENGTH =
    tables
    data_tab = T_pdf_tab
    FIELDNAMES =
    EXCEPTIONS
    FILE_WRITE_ERROR = 1
    NO_BATCH = 2
    GUI_REFUSE_FILETRANSFER = 3
    INVALID_TYPE = 4
    NO_AUTHORITY = 5
    UNKNOWN_ERROR = 6
    HEADER_NOT_ALLOWED = 7
    SEPARATOR_NOT_ALLOWED = 8
    FILESIZE_NOT_ALLOWED = 9
    HEADER_TOO_LONG = 10
    DP_ERROR_CREATE = 11
    DP_ERROR_SEND = 12
    DP_ERROR_WRITE = 13
    UNKNOWN_DP_ERROR = 14
    ACCESS_DENIED = 15
    DP_OUT_OF_MEMORY = 16
    DISK_FULL = 17
    DP_TIMEOUT = 18
    FILE_NOT_FOUND = 19
    DATAPROVIDER_EXCEPTION = 20
    CONTROL_FLUSH_ERROR = 21
    OTHERS = 22
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

  • Converting Smartform into pdf in encrypted format

    Hi All,
    I have a requirement to download smartform into pdf format. I have done this,but this pdf is editable with pdf editor tool.
    is there any way to encrypt pdf data and downloading it? I find some FM's in forum but those are used to encrypt and decrypt the passwords etc....
    Thanks in advance..
    Anji

    Hi
    SMART form to PDF
    https://wiki.sdn.sap.com/wiki/display/Snippets/ConvertSmartformtoPDFformat
    smartform to MAIL
    https://wiki.sdn.sap.com/wiki/display/Snippets/SmartformtoMailasPDF+attachment

  • Acrobat XI Pro successfully installed, but it failed in converting word files into PDF, why?

    I just installed Adobe XI Pro through the download assistant, it looks the installation went well, but when I tried to convert word files into PDF (tried many times), it failed. Anyone has the same problems, any solutions?

    Please reply with more information - what your operating system is, do you have Office installed, and what exactly is happening. Is there an error message, does the application crash, and from where are you starting the conversion (using Word and PDFMaker, using Acrobat's Create button, or batch processing).

  • Hello i am rajesh i am having problem while conveting other files into pdf format please help me

    i am rajesh i am having problem while converting other files into acrobat format please help me

    Hello Rajesh,
    I'm sorry to hear you're having trouble. Are you using Acrobat.com to convert your files to PDF? Please let me know where you are having trouble and I will do my best to help you convert your files. For your reference, here is a list of filetypes that can be converted to PDF online with Acrobat.com:
    http://kb2.adobe.com/cps/524/cpsid_52456.html#Create%20PDF
    Best,
    Rebecca

Maybe you are looking for

  • Adobe illustrator CC 2014 has stopped working

      a problem caused the program to stop working correctly windows will close the program and notify you if a solution is avaiable

  • JSTL 1.1.2, TOMCAT 5.5, JDK 5, Eclipse and Problems

    I have been having trouble loading the JSTL library (standard.jar & jstl.jar) I'm using Eclipse 3.0.2 to do my development work on my JSP pages. So normally I will just create my Tomcat(5.5 on JDK5.0) project using Sysdeo(tm) plugin in its default di

  • Cl_abap_structdescr= create causes CX_SY_STRUCT_COMP_Ndump for invalid char

    Hello experts, when generating a copy of a system generated ITAB with RTTI/C I get a CX_SY_STRUCT_COMP_NAME  dump for invalid character. The error is caused at statement: go_sdescr_new  = cl_abap_structdescr=>create( gt_components ). Dump excerpt: Th

  • Lightroom mise a jour du help erreur 16822

    Bonjour lorsque je veux obtenir de l'aide, le systeme me propose de la mettre a jour. J'accepte mais obtient en réponse un message en pop up : une erreur s'est produite pendant le téléchargement de la mise à jour. erreur n° 16822. Fermer impossible d

  • ANN: AIR Components panel Extension

    Hi there, after a long time of absence in the Dreamweaver area, I'm happy to announce that my latest extension, the AIR Components panel for Dreamweaver has been approved by Macromedia and is available for download at the Exchange. http://www.adobe.c