Problem with converting psd file to jpeg

I have completed a project with lots of layers and saved as a psd file including all the layers. I then flatten the image and save it as a jpeg. The jpeg doesnot look at all like the original psd.
this is the only file I have ever had that has done this. no other files are currently doing it. Just this one important days to complete file.
I work with Mac OS 10.6.8 Photoshop CS6 - Raw file to begin with. Never had this issue.
Anyone have any ideas.
I tried taking it into Cs5 and it did the same thing.

My dad took some maternity pictures of me, he took majority in B&W I wanted to make certain parts in color only so I watched a youtube tutorial to add color to a B&W he said to convert to a CMYK so I did, I continued to follow his instructions step by step. He just didn't mention that when it would save it would save as a PSD so I didn't even know abt that format until AFTER it happened. So I began to look up how to convert from PSD to JPEG...every forum I saw I tried what they suggested to no avail. I then went back to the original JPEG image, RE DID the edits, only this time when I went to save (as the SAVE AS feature truly isn't working, I can click it and click it, even use the shortcute keys...nothing happens) I scrolled down, chose the JPEG 2000 selection cause a forum said to chose JPEG when it pops up PSD, I didn't realize that it was different than a reg JPEG format and now it won't open even in cs6 it says NOT ENOUGH RAM and IDK why. So I've now gone yet again to the original JPEG, switched it to CMYK did all the edits again, I am now done editing, only this time I'm going to have someone tell me what to do next as it's still JPEG, 8bits chanel and I have NOT flattened it....what do I need to do next in order to insure it saves as a jpeg so I am able to upload it online?
I am not sure how to do screen shots or I would love to take them so someone can see exactly what I see. IDK if it matters but I am using the trial version of cs6, I was trying to get used to it some before I upgraded from cs5 extended.
If someone can instruct me as to how to post a link to the image so someone else could edit it then I'd be glad to do so.
I'm not an idiot...everyone started out a beginner at some point and I happen to be not as advanced as others...I see no fault in that, I am a 25 yr old woman who is busy as a working at home mom so forgive me if I can't invest a lot of time into learning a new program as quickly as I would like.
Thanks to anyone who can and is willing to help.

Similar Messages

Problems with photoshop psd files in Lightroom 2

I've been using Photoshop with raw and jpeg images for years, until just recently i started learning Lightroom 2 by watching the Kelby Training series online. I have learned a ton, but there are some things that i am just not able to figure out and for some reason they have not addressed my issues on Kelby.com.
Here is my list:
1. When i edit my images in lightroom and then click on a specific image to edit it in photoshop because it needs something removed for example, lightroom does not do what Matt Kloskowski on Kelby says lightroom should do. It does not open up a box asking how i want to edit the image. supposedly a box listing these three things should appear: edit a copy with lightroom adjustments, edit a copy, edit the original. I already changed my preferences so that images would be taken into photoshop as PSD files with prophotoRGB, like he said to do. Instead of opening up this box, it just opens the image in photoshop. When i save the image after editing it, it does save it as a _edit-psd, but when i close the image and go back into lightroom, the psd file does not show up. supposedly, the psd file should be stacked right next to the original image and it is not there. when i look at the images in the finder, it shows the psd file.
is there another setting that i need to change?
2. when i want to covert my nef raw files to jpeg for printing and burning dvds for clients, what is the best way to do this? i've done it by exporting to jpeg. but why, when i jpeg, does lightroom not use the jpeg images? for example, when i run a slideshow of a collection of images, it uses the lightroom edited nef files, PLUS, since LR does not show the psd files, the changes i made on photoshop do not show up on the slideshow either! it seems to use the psd files when converting to jpeg, so if i could just figure out a way to use the jpeg images for the slideshow all the edits should be there.do i need to import the jpeg files back into LR as a new collection?
3. when i convert to jpeg using photoshop, there are xmp files. why are there no xmp files with the original images when LR is used? where is all the information that belongs with the RAW images?
ok. i actually have a ton more questions, but i'll start with these for now.
Thank you so much!

Check the destination you have specified in the Import panel. It needs to point to a location that Lightroom can read and more important write files to. Usually the error message (in English) says “files cannot be read” and this really means that LR was unable to copy the files to the destination so then when it tried to import from that destination not file were found to read.

Printing problem with converted AW files

I've searched the forum for an answer to this to no avail, so here goes...
My wife recently bought a Mac mini as an upgrade to her "classic" iMac. I've managed to get the majority of her old files transferred over to the new machine but recently ran across a frustrating problem. She has created many files on her old machine using AppleWorks 5.0.3 and wants to use these files on her new machine using AW 6.2.9. The files open and edit fine, but when we go to print, her HP DeskJet 832C bucks and coughs and tries to print but only gets about 3/4 through the first page then stops. I've checked to make sure the printer driver is current and also reinstalled AppleWorks, but the same problem occurs. Any new files she creates using AW 6.2.9 print just fine and other software on the computer prints docments OK, too (PDFs, calendar, etc.). It appears to be just the converted AppleWorks files that complain. I can even copy the text from an old file to a new file in AppleWorks and THAT prints fine, but that's a hassle. Any ideas on this problem? Any help you can give would be appreciated. Thanks.
Mac mini Mac OS X (10.4.3)

Mac OS is "confused" about what program these files belong to & so gives them a generic one. This can be a result of not using Disk Utility to repair permissions after a system update. It is easily fixed.
Highlight a known AppleWorks document in the Finder, highlight it & choose Get Info from the File menu. In the Get Info box, click the triangle next to "Open With." Click on this drop-down menu & choose AppleWorks 6. If AppleWorks 6 is not a choice, choose "Other" & navigate to the AppleWorks 6 application. Now click the "Change" button under the text that asks if you want to open all documents like this with AppleWorks 6.
Sometimes it can happen if files are transfered from one Mac to another using a PC-formatted disk. I have written a user tip dealing with this, AppleWorks 6 won't open my AW 5 files. Even though the title says AppleWorks 5 files, it also applies to not being able to open AppleWorks 6 files.
Peggy

I am having problem in Converting .psd file into HTML site.

here is the screen shot of the PSD which i converted into HTML. It is done with the help of Slice select too. and i got this kind of error in output. so i want a way by which i can transform my psd designs the same way they look in to working website. the template goes other places

Just wanted to correct something you said, simply because beginners are reading these forums and may get confused.
You can not convert any image into an html file. An html file is simply a text file that uses tags that can point to an image file.
Web browsers normally accept jpg, png, and gif files, so you can convert your psd file into one of those three formats and let the html file point to it.
Here are some sites for learning about html and css. Its the latter that can help with your positioning issue.
http://www.htmlbasix.com/
http://www.htmlgoodies.com/
http://www.thesitewizard.com/
http://www.lissaexplains.com/
http://www.w3.org/MarkUp/html-spec/html-spec_toc.html < - - - The Official source
http://www.yourhtmlsource.com/
http://msdn2.microsoft.com/en-us/library/aa286532.aspx Microsoft’s info
w3.org also has the official specs for css.

Problems with converted .CR2 files to .dgn on Mac Snow Leopard

Hi,
I'm trying to convert .CR2 files from my Canon 70D into .dng files so that I can use them in Adobe Bridge CS5. I have been able to convert them using Adobe DNG converter 8.2 but under the file's info I see "Dimensions 0x0". I don't understand why this is happening or how to change this so that it reflects the correct size of the image. Also, I am not able to see thumbnails of the images once they have been converted, and again can't understand why.
Can anyone suggest what I'm missing here?
I have converted photos previously to .dng and they are visible as thumbnails on my mac and the dimensions are shown in their properties so can't understand why this is happening with this new set of photos.
Thanks

Are the dimensions those of the embedded preview? Check to see what size of preview you have set in the DNG Converter options. Perhaps it is set to None.

Problems with converted .MTS files in Final Cut Express 4

I have a hard drive full of video shot and a consumer grade HD camera in the .MTS format.
After struggling with finding an acceptable converter, I finally bought iSkysoft's Video Converter.
I've been using the converter's output preset of "MP4 Format for Final Cut X" and "High definition MP4 format" settings and they both yield the same results.
Now I am having problems simply editing the footage in FCE4.
I can take the footage and set i/o points in them but when I drag clips into the timeline, it often hangs up, locks up, FCE is unresponsive and it's even crashed.
This is on a 2 x 3.2 GHz Quad-Core Intel Mac running 10.6.8.

In order to use .mts video in Final Cut Express, you need to convert the video to QuickTime/Apple Intermediate Codec before importing into FCE. .mts video files are typically H.264 video, highly compressed and is not something that FCE can edit. Ditto for "MP4 format for FCPX or HighDef MP4 format". If iSkysoft cannot convert to QT/AIC then I suggest Clipwrap
Note: for the future, if your camcorder is an AVCHD camcorder you can directly ingest the video from the camcorder into FCE.

Problem with converted mod file

Hello,
I have taken some clips with a friends camera, which saves them to the oh so annoying .MOD format.
I have converted it to avi, h264, mp4, and whats not, but when I already succeed to import the file to premier, when I play and view it during editing, only the audio works, I cannot seek, and the video is frozen, at the maximum moving 1 to 2 frames.
it also makes the play/pause inaccessible sometimes.
In addition, when exporting the file, the same behavior is encountered in the final file.
What should I do?
Thanks for the help.

Rename files to .mpg or try this one:
http://converio.fr/converio_095.htm

Creative Cloud has a problem with syncing (psd-)files.

"Sync. of file is not possible!
When I take the file into another folder it will be synced as usual. But, that cannot be the solution.
There is no further information shown with the listed problems.
How can we solve this?

Error: "Unable to sync files"
Size Limits https://forums.adobe.com/thread/1488242
Phantom folder problem https://forums.adobe.com/thread/1490445
Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

Envore cs4 problem with convertion project file blue ray.

Encore CS4 problem z konwersja plików cs4 Projekt blue ray.

For CS4 you must update the Roxio component, especially with Win8
http://forums.adobe.com/thread/1309029
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

Problem with converting .RIFF : I still cannot transfer RIFF file to ipod

Snitch
Posts: 13
From: Cali
Registered: Feb 13, 2006
Problem with converting .RIFF to mpeg4 even tho its a mpeg
Posted: Jun 2, 2006 2:19 PM
1st problem trying to convert mpeg video thru ipod converter. I have successfully converted DVD`s and other downlaoded videos but this is the 1st time i ran into a wall.
I am using GSPOT CODEC software and it says its a "riff- wrapped " file. When I open up Videora converter it doenst do anything meaning no green bars to show its progressing into mpeg4 format. It does finish and it goes to finish videos but when I try to manually put it in my I-tunes it doenst do anything. Why i am posting this. I am frustrated. WHAT -and it appears to be mpeg - the heck is RIFF wrapped file? Please help I have GUNS n ROSES live at ritz 1988 rare footage andI want it on my ipod and It does play in my windows media player so its a true video with sound
Intel P4 Windows XP Black 60 GB Video w/ Agent 18 shield
Johnathan Burger
Posts: 1,450
Registered: Jul 27, 2005
Re: Problem with converting .RIFF to mpeg4 even tho its a mpeg
Posted: Jun 3, 2006 1:38 AM in response to: Snitch
Never heard of RIFF, so I did research and found these sources: http://ccrma.stanford.edu/courses/422/projects/WaveFormat/
http://en.wikipedia.org/wiki/RIFF
Good luck.
17" iMac 1.8ghz G5 2GB 12 iBook 1.2ghz 512mb 5th gen iPod Mac OS X (10.4.6) Microsoft Free since '92
Pages: 1 Back to Topic List

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Problem with Converter

Problem with Converter. When I save a PDF it is saved as a Word document and I cannot open it. What is the problem? I have uninstalled the Converter, but it continues to save PDF as Word.

I cannot open the file with Word. I am not trying to convert the file at
all. When I save a PDF and then try to open the file, it is saved as a
Word document and it will not allow me to open it.
On Wed, Mar 26, 2014 at 9:58 AM, Claudio González

HOW TO CONVERT RAW FILES TO JPEG RGB 8 BIT in iphoto

Can someone please tell me how to convert RAW files to jpeg RGB 8 bit in iphoto on an iMac?

How are you trying to "export to Mypics"? The only way to get a Raw out of iPhoto is to export with the Kind set to Original.
Regards
TD

Problem with the installation file

Hello Everyone!
I am trying to install Nokia Ovi Suite in my Windows 7 computer from yesterday, whenever I run the web installer file I am getting the Error Message as "Problem with the installation file" (attached as a jpeg file with this post).
I have downloaded the exe file (approx 88.4MB from : http://nds1.nokia.com/files/support/global/phones/software/Nokia_Ovi_Suite_webinstaller_ALL.exe ) several times, still no luck.
Anyone is having the solution for this problem?
Thanks in advance!
Solved!
Go to Solution.
Attachments:
Error Message.JPG ‏23 KB

Hi SSA
I've downloaded it so many times I nearly exceeded my download limit ! Seriously , I know others must be able to get it , so why is there a problem ? I'm going to stop at the store where I purchased the phone and get THEM to try. If the sig is OK , I'm going to copy it and bring it home , if it's NOT OK then maybe they'll take it up with Nokia as they're the ones selling it to the ' happy customers' ..? When I first contacted support , they said to disable both firewall and A/V before attempting to download it ? I've downloaded thousands of files and never had to do that ? Sure ,you might have to disable something during installation , but not for the download ? I even did it in safe mode with networking and the same thing happened. I even asked if they could send me an install CD and they said NO. Not happy about that either..We'll see what happens.. I like the phone ..I'd just like it to do what I bought it for !!

How do you convert Raw files into jpeg.

I have never shot in Raw before and I have a huge project due tomorrow. I need help Asap. What is the easiest way to convert Raw files into jpeg, can Light Room convert the files. I have tried so many different ways and nothing seems to work.

michaelfragale wrote:
I have never shot in Raw before and I have a huge project due tomorrow. I need help Asap. What is the easiest way to convert Raw files into jpeg
It depends on the sofware you have. ACR (Adobe Camera Raw) hosted by Bridge or by Photoshop can convert ("open") raw files, as can Lightroom.
However, not all camera models are supported by all versions of the software. We need to know the make and exact model of the camera that generated the raw files to advice you further.
We can also assist you with the conversion through ACR hosted by Photoshop.
Olease note that there are dedicated forums for Lightroom, for Adobe Camera Raw and for Bridge.
Here's the list of which cameras are supported by each version of ACR. Note that later versions supporte all camera models supported in previous versions of ACR.
http://kb2.adobe.com/cps/407/kb407111.html
Note that the latest version of ACR to run in CS4 is ACR 5.3;
CS3 runs ACR 4.6;
CS2 runs ACR 3.7;
CS runs 2.4.

Am I able to convert RAW files to jpegs on Photoshop Elements?

Am I able to convert RAW files to jpegs on Photoshop Elements?

Hi,
Sorry, but with the information you have given, the only answer I can give is "possibly".
Each camera model produces a slightly different raw format - even different models by the same manufacturer and even if they have the same extension (file type). The latest cameras will not be supported by older versions of Photoshop Elements although there is a converter which can help.
To give you a better answer, we need to know
1) The camera make and model
2) The version of Photoshop Elements that you are using
3) The operating system that you are running on.
Brian

Problem with converting psd file to jpeg

Similar Messages

Maybe you are looking for