Problem with create standby by rman oracle9.2

I have a problem: until create standby database by rman i have error:
RMAN-03015: error occurred in stored script opomc_clone
RMAN-03002: failure of Duplicate Db command at 02/18/2010 12:26:34
RMAN-03015: error occurred in stored script Memory Script
ORA-19587:
ORA-27091: skgfqio:
ORA-27072: skgfdisp:
SVR4 Error: 5: I/O error
Additional information: 349248
The scripts are ok becouse they work earlier.
The main database was a standby but now is primary.
I create new standby base on remote server
I have in bdump strange error for me until create rman copy for standby:
Clearing standby activation ID 1004670785 (0x3be20f41)
The primary database controlfile was created using the
'MAXLOGFILES 5' clause.
The resulting standby controlfile will not have enough
available logfile entries to support an adequate number
of standby redo logfiles. Consider re-creating the
primary controlfile using 'MAXLOGFILES 8' (or larger).
Use the following SQL commands on the standby database to create
standby redo logfiles that match the primary database:
ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 409600000;
ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 409600000;
ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 409600000;
ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 409600000;
Any suggestions?
Sorry for my english :)
Edited by: user12044451 on 2010-02-18 03:56

can you use like this
BACKUP DATABASE INCLUDE CURRENT CONTROLFILE FOR STANDBY PLUS ARCHIVELOG;startup nomount;
duplicate target database for standby nofilenamecheck;
in detail check
http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmstand.htm#1000921

Similar Messages

Problem with Active Standby Pair

Hi ALL!
I have a problem with Active Standby Pair replication.
I have 2 instance TT on host1 and host2
On host1 i created 2 data store rep1 and rep2
On host2 i created 1 data store t1
ALL data stores identical, and have one table REP_TAB.
AFter this i work with rep1 ds:
Creating active standby pair:
create active standby pair rep1 on "host1",
t1 on "host2"
subscriber rep2 on "host1"
store rep1 on "host1" port 18000 timeout 30
store t1 on "host2" port 18000 timeout 30and starting repagent
call ttrepstart;After this i try using ttrepadmin utility and ALWAYS GET this error
C:\Documents and Settings\user1>ttrepadmin -duplicate -from rep1 -host "host1" rep4
Enter password for 'tt':
TT12048: Error performing backup at source. More information can be found in th
e source's message log
TT7001: REP1:receiver.c(4979): TT7001: User authentication failedPasswort right. I dont know what i am doing wrong? Please Help!

Did you enable Access Control in this instance when you installed? If so, have you created the relevant users in the TimesTen instance?
If you have access to Metalink you may find Note 421220.1 useful in clarifying this process, and also for avoiding other problems you may encounter after performing a successful duplicate.

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

Apple ID FAQ http://support.apple.com/kb/HE37

Problem with create universe on Business Objects XI 3.1 base on SAP Query

Hello,
I have a problem with create universe on Business Objects XI 3.1 base on SAP Query.
The problem is hierarchy. Massage on Busines Objects is :
OWBS_ELEMT__ISTKOSZT(cube ICPC01/BEX_ICOC01):Exception condition "HIERARCHY NOT FOUND" raised.(WIS 10901)
Query in BEX run OK.
Best regards.
Ela.

Hello,
Thanks for response.
When I run BEX QUERY, all works OK.
All hierarchies was created and activated on system BW.
This situation appears after upgrade BW to SAP NetWeaver 7.3.
Before upgrade I created universe without any problems.
Regards Ela

Problem with creating new user in portal = portlet is not visible

Hi,
I've got a problem with creating new users in portal. In the Administer tab of the builder is the user portlet not visible.
How can I make this portlet visible?
Please Help
thank you...
Gilbert

Hi..my problem slightly similar.
I created one new user, and didn't select anything from "Public Groups Assignment" and "Privilege Assignment" for him.
I expect the user will be a public user.
But, when he try to logged in the portal,
He cannot see all the PORTLETS related to database values..
All he can see just LINKS -that all in my portal right now beside the report from database that the user cannot see :)
So, what did i do wrong?
Plz Advise, and thanks.

The Critical Problems for Creating Standby Database

The Critical Problems for Creating Standby Database:(I want to create a physical standby database on the same system of the primary database)
1. Should I copy all the backup datafiles, standby controlfile and password file to a same directory before the first time to mount the standby database?
2. Before mounting the standby database, Should I change the datafile's name to a new one in the standby controlfile? How to change them?
3. When issuing the command to mount the standby database, should I specify the controlfile's name.(using which controlfile to mount)
These problems are not clearly secified in Oracle documentations.

Can you point us to the Windows specific documentation you refer to?
The parameter DB_FILE_NAME_CONVERT should take care of the new mapping for your datafiles (and LOG_FILE_NAME_CONVERT for logs), so you should be able to put them where you want and use the parameter to point Oracle to the correct location. You should not need to change the name in the controlfile.
Place your standby controlfiles where you have the control files defined in your parameter file and Oracle should recofgnise that it is a standby db. You should not need to specify which controlfiles to use (if this is even possible), your CONTROL_FILES init parameter points to them.
Not sure about the password file....my instances are on separate boxes and the password file has the same name on both primary and standby.

Problem with creating site from another computer!

Hi
I have WebDB 2.2 and Oracle8i instaled on the same computer. I have a problem to create site from another computer. There is not any process when I try to create site. There is always 0%.
But I have no problem with creating site on the origin computer.
Does anybody know something about it?

I am just not clear what to do once I have made changes and have published the new information.
You shouldn't have to do anything. iWeb will save the information in the Domain.sites file. You can keep this file in a folder, or even on your desktop and iWeb will launch from a double-click on the file.

Problem with creating email account on E72

I have bought E72 and want to use mine company email - but there is a problem with creating email account in mail program.
Restoring to fabric settings doesn't works.
When I'm creating Gmail account it's OK, but phone doesnt want to cooperate with other accouns:/

Try again without using WLAN. I had same problem, but solved it using GPRS.

Problem with creating chapter-markers

Hi everyone,
as the title already says it, I've got a problem with creating chapter markers in Quicktime Pro 7.6.4. There's something wrong with the font, displayed in Quicktime. The problem first appeared a few days ago. Before this, everything went fine and I don't have a clue what causes the problem.
Please click HERE to see a screen-recording of the steps I do to create chapters:
- convert the chapters into unformatted text and save it as Unicode (UTF-16) text file.
- open it in Quicktime and everything (including the german umlauts) is displayed correct.
- export it into a Text-file with description
when I open the new text file in Quicktime, the fonts are displayed in asian letters, but when I view it in the Texteditor, the text is almost correct, BUT the umlauts are not ok. So I go on with...
- correct the umlauts and save a new file as Unicode (UTF-16) again.
After I open the new file in Quicktime, the text is completely gone. As the text file seems to be ok in the Texteditor, I guess there must be something wrong with Quicktime. I tried to reinstall Quicktime 7 from the "Mac OS X 10.6 Snow Leopard" Installation-Disc, but the problem persists.
I' would appreciate any help...
Thanks in advance and best regards,
Michael

I'm having the exact same issue. I have created my movie in IMovie 09 then under the "share " menu I sent the movie to iDVD. Everything looks fine on screen, but all I get on the final product is the movie.
After digging deeper into the tutorials all they show is dragging a movie into the idvd shell, not sharing via imovie.
Thus I'm currently attempting to create a quicktime movie then drag it into the IDVD shell. I think that way the chapter markers and everything should show up and burnt into the final project. I'm guessing the "share" option with the IDVD from iMovie doesn't work properly???

Problem with creating order through order template

Hi experts,
We have problem with creating order by order template. Extensions data available in order template is not sent to order. Extension data are showing upto order submission form. But after sucessful creation of order extension data are no longer available in CRM-ORDEr.
We are using ISA 4.0 with CRM 4.0.
We recently applied patches on CRM server. Before patching it was working fine.
Can you please suggest us to solve this issue?
Thanks in Advance.
Regards,
Murugan Arumugam.

closed.

Problem with Creating Info Record

Hello Gurus,
I've problem with Creating Info Record
i tried to create info record for Plant Specific/Purchase Org
The first Screen General Data is OK
i entered all the data in the next screen ie
Purchase Organization Data screen but i'm getting error
<b>Make an entry in all required fields</b>
but there is Mandatory Textbox ie "VALID TO" which im unable to select Bcos its Disabled
pls help me regarding this
thanks in advance

Hi
Have u given the net price. <b>VALID TO</b> is the date until which the price shown in the info record is valid.
If there is no price that is valid on the current date, the last-valid price is displayed and the date field contains the day before the start of the next validity period (this may be 12.31.9999 if there is no further validity date). If all validit periods lie beyond the current date, the price of the next period is displayed. The date field then contains the end date of this period.
These validity periods we will maintain Purchse data CONDITIONS while creating info record. Check the validity period for the conditions.
Hope this will helps u
Ravi
Ravikumar Bolla

Problem with creating virtual column

Hello,
We've got problem with creating virtual column.
There is table R_T that contain columns R_ID and L_ID, we would like to create virtual column RL_ID that contains sth like 'R_ID-L_ID' (R_ID, L_ID and RL_ID are varchars).
According documentation we've tried:
alter table R_T add column (RL_ID varchar2(60) generated always as (R_ID||'-'||L_ID) VIRTUAL)
but getting
ORA-00904: : invalid identifier
00904.00000 - "%s: invalid identifier"
Have no idea where is the problem.
Table, columns names are little different but contains only capital letters A - Z and underscore "_".
Has anyone idea?
Thanks a lot.

Strange...
This does work for me :
Connected to Oracle Database 11g Enterprise Edition Release 11.2.0.1.0
Connected as dev
SQL>
SQL> create table r_t (
2   r_id varchar2(25),
3   l_id varchar2(25)
4 );
Table created
SQL> insert into r_t (r_id, l_id) values('R','L');
1 row inserted
SQL> alter table r_t add (rl_id varchar2(60) generated always as (r_id||'-'||l_id) virtual);
Table altered
SQL> select * from r_t;
R_ID                      L_ID                      RL_ID
R                         L                         R-L
SQL>

I have problems with creating new projects in iMovie.

I have problems with creating new projects. When i try, the mac says the following "Make sure there is enough disk space and that you have permission to write the projects to the drive." I have 8GB available, so its not that.

thanks for your support
lol

Creating Standby From RMAN Compressed backup taken on Primary ....

I am creating a Standby from RMAN Compressed backup taken on Primary.
On Primary, I have taken Compressed backup as follows:
RMAN> run
allocate channel c1 type disk;
allocate channel c2 type disk;
allocate channel c3 type disk;
BACKUP AS COMPRESSED BACKUPSET DATABASE PLUS ARCHIVELOG format '/dboracle/orbit_pr_bkp/primary_%U';
backup current controlfile for standby format '/dboracle/orbit_pr_bkp/primary_cntl.bkp';
oracle@apl06635orbvu1:/dboracle/orbit_pr_bkp>ls -ltr
total 51652
-rw-r----- 1 oracle dba 11972608 Jan 7 13:45 primary_0tm1h32n_1_1
-rw-r----- 1 oracle dba 15762432 Jan 7 13:45 primary_0sm1h32n_1_1
-rw-r----- 1 oracle dba 16785920 Jan 7 13:45 primary_0rm1h32n_1_1
-rw-r----- 1 oracle dba 1088000 Jan 7 13:45 primary_0um1h32v_1_1
-rw-r----- 1 oracle dba 32768 Jan 7 13:45 primary_12m1h33r_1_1
-rw-r----- 1 oracle dba 7143424 Jan 7 13:47 primary_cntl.bkp
On Standby, I restored the control file as below:
RMAN> restore standby controlfile from '/dboracle/orbit_pr_bkp/primary_cntl.bkp';
Starting restore at 10-JAN-11
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:01
output filename=/dboracle/orbit_dr/oradata/ORBIT_DR/controlfile/o1_mf_6lo6nwfr_.ctl
output filename=/dboracle/orbit_dr/flash_recovery_area/ORBIT_DR/controlfile/o1_mf_6lo6nwky_.ctl
Finished restore at 10-JAN-11
But, When I am trying to restore the datafiles, RMAN is throwing error:
RMAN> run {
allocate channel d1 type disk format '/dboracle/orbit_pr_bkp/primary_%U';
allocate channel d2 type disk format '/dboracle/orbit_pr_bkp/primary_%U';
restore database;
2> 3> 4> 5>
released channel: ORA_DISK_1
allocated channel: d1
channel d1: sid=155 devtype=DISK
allocated channel: d2
channel d2: sid=151 devtype=DISK
Starting restore at 10-JAN-11
released channel: d1
released channel: d2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 01/10/2011 05:38:56
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
What would be the correct RMAN command?
Regards, Anirban

After your RESTORE the (standby) controlfile, you must MOUNT the database instance with "ALTER DATABASE MOUNT".
You can also then query the controlfile with a "LIST BACKUP" or "LIST BACKUP SUMMARY" in RMAN to see if the deseired backups have been cataloged in the controlfile.
Don't specify the format for the ALLOCATE CHANNEL when you RESTORE DATABASE. In fact, you don't need to ALLOCATE CHANNEL at all when the device type is the default value of DISK if your are on 10gR2 or above.
Hemant K Chitale

Problem with creating a straight line with polygamo lasso

I am having a problem with polygamo lasso. when i create a triangle or a rechtangle in straight line it is turn out the line become not straight. I don't what did i wrong, was always working fine till today. YOu can see the pic the top line lookslike a step.

Ihope I did right, was not sure how to save as channel.

Problem with create standby by rman oracle9.2

Similar Messages

Maybe you are looking for