Problem With Creating a Huge HTML document In Portal

Hallo,
I am trying to insert a 735 lines long HTML into Portal. When I press the finish button I get the following error message:
The requested URL /pls/portal30/PORTAL30.wwv_builder.accept was not found on this server.
If I then go back and take out one of the forms I have in the HTML file and press the finish button, Portal accepts this.
I am sure the problem is related to the size and not code because I have tested the form alone in Portal and it works.
Would anyone know of a way around this problem?

when i write the tow statements the first one didn't run but the second one run
SQL> select to_timestamp('02/04/08 11:00:00.00 AM', 'DD/MM/RR HH12:MI:SS.FF PM') from dual;
select to_timestamp('02/04/08 11:00:00.00 AM', 'DD/MM/RR HH12:MI:SS.FF PM') from dual
ERROR at line 1:
ORA-01855: AM/A.M. or PM/P.M. required
SQL> select to_timestamp('02/04/08 11:00:00.00', 'DD/MM/RR HH24:MI:SS.FF') from dual;
TO_TIMESTAMP('02/04/0811:00:00.00','DD/MM/RRHH24:MI:SS.FF')
02/04/08 11:00:00.000000000 Õ
when i used the second one in the job this error appear
BEGIN
DBMS_SCHEDULER.CREATE_JOB (
job_name => 'first_job',
job_type => 'executable',
job_action => 'C:\Documents and Settings\mohamed.sallam\Desktop\Calculator.lnk',
start_date => 'to_timestamp('02/04/08 11:00:00.00', 'DD/MM/RR HH24:MI:SS.FF')',
repeat_interval => 'FREQ=HOURLY;INTERVAL=12',
end_date => 'to_timestamp('02/04/09 11:00:00.00', 'DD/MM/RR HH24:MI:SS.FF')',
comments => '-------');
END;
0552: Bind variable "MI" not declared.

Similar Messages

  • Problems in creating and storing new documents using BAPI_DOCUMENT_CREATE2

    Hi experts,
    I'm getting problems in creating and storing new documents using BAPI_DOCUMENT_CREATE2.
    I have a scenario where is defined the document type ZC1, document part 200, authorization group 0002 and for all of these  documents the storage category "Cofre DMS1". And the status which demands the storage category is 'FR'.
    I've been fullfiling the BAPI_DOCUMENT_CREATE2 in this way:
    "Tables
    data: it_doc like bapi_doc_draw2,
          it_return like bapiret2,
          it_files like bapi_doc_files2 occurs 0 with header line,
          it_objs like bapi_doc_drad occurs 0 with header line.
    "Variables
    data: wl_doctype like bapi_doc_draw2-documenttype,
          wl_docnumber like bapi_doc_draw2-documentnumber,
          wl_docpart like bapi_doc_draw2-documentpart,
          wl_docversion like bapi_doc_draw2-documentversion.
    it_doc-documenttype = 'ZC1'.
    it_doc-documentpart = '200'.
    it_doc-documentversion = '00'.
    it_doc-description = 'Test of documents creation via BAPI'.
    it_doc-username = sy-uname.
    it_doc-statusextern = 'FR'.
    it_doc-authoritygroup = '0002'.
    refresh it_files[].
    clear it_files.
    it_files-originaltype = '1'.
    it_files-storagecategory = 'Cofre DMS1'.
    it_files-wsapplication = 'PDF'.
    it_files-docfile = 'c:\110307.pdf'.
    it_files-description = 'Test file'.
    append it_files.
    refresh it_objs[].
    clear it_objs.
    it_objs-objecttype = 'EKPO'.
    it_objs-objectkey = '47000497600010'.
    append it_objs.
    CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
      EXPORTING
        documentdata = it_doc
      IMPORTING
        documenttype = wl_doctype
        documentnumber = wl_docnumber
        documentpart = wl_docpart
        documentversion = wl_docversion
        return = it_return
      TABLES
        objectlinks = it_objs
        documentfiles = it_files.
    After execute the BAPI process I got the following error:
    E26 087 - Data carrier COFRE DMS1 not defined
    Does anybody have a sugestion to help me, please?
    Thks
    David
    Edited by: David Tsutsui on Mar 18, 2010 10:52 AM

    Please refer to this thread, it tells why you need a data carrier you can also configure the same in DC20.
    Data Carriers for Storage the Originals of DMS

  • I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

    I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

    Apple ID FAQ   http://support.apple.com/kb/HE37

  • Creating a new HTML document - removing "todos"

    When creating a new HTML document in a KM repository (i.e. Folder > New > HTML File...), I get a form where I name my HTML document and enter the content etc. I can also choose, from a dropdown box, the document type between a Normal document or a "todos". My questions are the following:
    1) What is "todos" in this case? (I don't think it means "To Do's".)
    2) As a portal admin, how can I remove "todos" from the dropdown box or disable the dropdown box completely.
    Thank you

    Hi Mick,
    sorry, quite late, but better than never
    > how can I remove "todos" from the dropdown box or
    > disable the dropdown box completely.
    System Administration - System Configuration - KM - Configuration - CM - Global Services - Resource Types - Delete "todos".
    > What is "todos" in this case?
    > (I don't think it means "To Do's".)
    I think that in fact some SAP developer wanted to mark this place that there would be more work to be done (Resource Types to be defined or so).
    Hope it helps
    Detlev

  • I have a problem with Pages shutting down my documents.

      I have a problem with Pages shutting down my documents. I have several
    several documents on my homepage,but once I select one it shuts down and
    goes to the ipad homepage.Other documents open with no problem.
    Can someone tell me what's happening
    antdel

    Pages is crashing for some reason.
    You say that other documents open with no problems, do you mean other Pages documents or documents in another app?
    Try closing Pages completely in the recents tray and reboot your iPad. See if that helps. If it doesn't help, you may have to delete and reinstall Pages. If that doesn't work, you might have a corrupt document that you need to track down and delete.
    Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Problem with create universe on Business Objects XI 3.1 base on SAP Query

    Hello,
    I have a problem with create universe on Business Objects XI 3.1 base on SAP Query.
    The problem is hierarchy. Massage on Busines Objects is :
       OWBS_ELEMT__ISTKOSZT(cube ICPC01/BEX_ICOC01):Exception condition  "HIERARCHY NOT FOUND" raised.(WIS 10901) 
    Query in BEX run OK.
    Best regards.
    Ela.

    Hello,
    Thanks for response.
    When I run BEX QUERY, all works OK.
    All hierarchies was created and activated  on system BW.
    This situation appears after upgrade BW to SAP NetWeaver 7.3.
    Before upgrade I created universe without any problems.
    Regards Ela

  • I had a problem with print preview of billing document.

    HI all,
    I had a problem with print preview of billing document which contains two output types ZR1 ZR2..
    For the footer text of billing document I maintained the font size as 7,5 pts, But when i go for print preview from output type ZR1 the font size of footer text is very small and looks good for output type ZR2.
    If i change the print options-->logical destination of output type ZR1 same as Output type ZR2, the footer text looks good.
    I think there is some issue with logical destination in print options for the output type ZR1, how can i resolve  it.

    hi,
    for both the output types , r u using same sapscript or smartform?
    if yes then, u can control it in output options of smartform and also in sapscript , you can control through if condition.
    and if differect sapscript or smartform then you should not get such problem.
    you can check the sapscript or smartfrom in TNAPR table.

  • Problem with creating new user in portal = portlet is not visible

    Hi,
    I've got a problem with creating new users in portal. In the Administer tab of the builder is the user portlet not visible.
    How can I make this portlet visible?
    Please Help
    thank you...
    Gilbert

    Hi..my problem slightly similar.
    I created one new user, and didn't select anything from "Public Groups Assignment" and "Privilege Assignment" for him.
    I expect the user will be a public user.
    But, when he try to logged in the portal,
    He cannot see all the PORTLETS related to database values..
    All he can see just LINKS -that all in my portal right now beside the report from database that the user cannot see :)
    So, what did i do wrong?
    Plz Advise, and thanks.

  • Problem with creating site from another computer!

    Hi
    I have WebDB 2.2 and Oracle8i instaled on the same computer. I have a problem to create site from another computer. There is not any process when I try to create site. There is always 0%.
    But I have no problem with creating site on the origin computer.
    Does anybody know something about it?

    I am just not clear what to do once I have made changes and have published the new information.
    You shouldn't have to do anything. iWeb will save the information in the Domain.sites file. You can keep this file in a folder, or even on your desktop and iWeb will launch from a double-click on the file.

  • Problem with creating email account on E72

    I have bought E72 and want to use mine company email - but there is a problem with creating email account in mail program.
    Restoring to fabric settings doesn't works.
    When I'm creating Gmail account it's OK, but phone doesnt want to cooperate with other accouns:/

    Try again without using WLAN. I had same problem, but solved it using GPRS.

  • Problem with creating chapter-markers

    Hi everyone,
    as the title already says it, I've got a problem with creating chapter markers in Quicktime Pro 7.6.4. There's something wrong with the font, displayed in Quicktime. The problem first appeared a few days ago. Before this, everything went fine and I don't have a clue what causes the problem.
    Please click HERE to see a screen-recording of the steps I do to create chapters:
    - convert the chapters into unformatted text and save it as Unicode (UTF-16) text file.
    - open it in Quicktime and everything (including the german umlauts) is displayed correct.
    - export it into a Text-file with description
    when I open the new text file in Quicktime, the fonts are displayed in asian letters, but when I view it in the Texteditor, the text is almost correct, BUT the umlauts are not ok. So I go on with...
    - correct the umlauts and save a new file as Unicode (UTF-16) again.
    After I open the new file in Quicktime, the text is completely gone. As the text file seems to be ok in the Texteditor, I guess there must be something wrong with Quicktime. I tried to reinstall Quicktime 7 from the "Mac OS X 10.6 Snow Leopard" Installation-Disc, but the problem persists.
    I' would appreciate any help...
    Thanks in advance and best regards,
    Michael

    I'm having the exact same issue. I have created my movie in IMovie 09 then under the "share " menu I sent the movie to iDVD. Everything looks fine on screen, but all I get on the final product is the movie.
    After digging deeper into the tutorials all they show is dragging a movie into the idvd shell, not sharing via imovie.
    Thus I'm currently attempting to create a quicktime movie then drag it into the IDVD shell. I think that way the chapter markers and everything should show up and burnt into the final project. I'm guessing the "share" option with the IDVD from iMovie doesn't work properly???

  • Problem with creating order through order template

    Hi experts,
    We have problem with creating order by order template.  Extensions data available in order template is not sent to order.   Extension data are showing upto order submission form.  But after sucessful creation of order  extension data are no longer available in  CRM-ORDEr.
    We are using ISA 4.0 with CRM 4.0.
    We recently applied patches on CRM server.  Before patching it was working fine.
    Can you please suggest us to solve this issue?
    Thanks in Advance.
    Regards,
    Murugan Arumugam.

    closed.

  • Problem with  Creating Info Record

    Hello Gurus,
    I've problem with Creating Info Record
    i tried to create info record for Plant Specific/Purchase Org
    The first Screen General Data is OK
    i entered all the data in the next screen ie
    Purchase Organization Data screen but i'm getting error
    <b>Make an entry in all required fields</b>
    but there is Mandatory Textbox ie "VALID TO" which im unable to select Bcos its Disabled
    pls help me regarding this
    thanks in advance

    Hi
    Have u given the net price. <b>VALID TO</b> is the date until which the price shown in the info record is valid.
    If there is no price that is valid on the current date, the last-valid price is displayed and the date field contains the day before the start of the next validity period (this may be 12.31.9999 if there is no further validity date). If all validit periods lie beyond the current date, the price of the next period is displayed. The date field then contains the end date of this period.
    These validity periods we will maintain Purchse data CONDITIONS while creating info record. Check the validity period for the conditions.
    Hope this will helps u
    Ravi
    Ravikumar Bolla

  • Problem with creating virtual column

    Hello,
    We've got problem with creating virtual column.
    There is table R_T that contain columns R_ID and L_ID, we would like to create virtual column RL_ID that contains sth like 'R_ID-L_ID' (R_ID, L_ID and RL_ID are varchars).
    According documentation we've tried:
    alter table R_T add column (RL_ID varchar2(60) generated always as (R_ID||'-'||L_ID) VIRTUAL)
    but getting
    ORA-00904: : invalid identifier
    00904.00000 - "%s: invalid identifier"
    Have no idea where is the problem.
    Table, columns names are little different but contains only capital letters A - Z and underscore "_".
    Has anyone idea?
    Thanks a lot.

    Strange...
    This does work for me :
    Connected to Oracle Database 11g Enterprise Edition Release 11.2.0.1.0
    Connected as dev
    SQL>
    SQL> create table r_t (
      2   r_id varchar2(25),
      3   l_id varchar2(25)
      4  );
    Table created
    SQL> insert into r_t (r_id, l_id) values('R','L');
    1 row inserted
    SQL> alter table r_t add (rl_id varchar2(60) generated always as (r_id||'-'||l_id) virtual);
    Table altered
    SQL> select * from r_t;
    R_ID                      L_ID                      RL_ID
    R                         L                         R-L
    SQL>

  • I have problems with creating new projects in iMovie.

    I have problems with creating new projects. When i try, the mac says the following "Make sure there is enough disk space and that you have permission to write the projects to the drive." I have 8GB available, so its not that.

    thanks for your support
    lol

Maybe you are looking for